196 lines
6.2 KiB
C++
196 lines
6.2 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#ifdef __STM32F1__
|
|
|
|
#include "../../inc/MarlinConfig.h"
|
|
#include "MarlinSerial.h"
|
|
#include <libmaple/usart.h>
|
|
|
|
// Copied from ~/.platformio/packages/framework-arduinoststm32-maple/STM32F1/system/libmaple/usart_private.h
|
|
// Changed to handle Emergency Parser
|
|
static inline __always_inline void my_usart_irq(ring_buffer *rb, ring_buffer *wb, usart_reg_map *regs, MarlinSerial &serial) {
|
|
/* Handle RXNEIE and TXEIE interrupts.
|
|
* RXNE signifies availability of a byte in DR.
|
|
*
|
|
* See table 198 (sec 27.4, p809) in STM document RM0008 rev 15.
|
|
* We enable RXNEIE.
|
|
*/
|
|
uint32_t srflags = regs->SR, cr1its = regs->CR1;
|
|
|
|
if ((cr1its & USART_CR1_RXNEIE) && (srflags & USART_SR_RXNE)) {
|
|
if (srflags & USART_SR_FE || srflags & USART_SR_PE ) {
|
|
// framing error or parity error
|
|
regs->DR; // Read and throw away the data, which also clears FE and PE
|
|
}
|
|
else {
|
|
uint8_t c = (uint8)regs->DR;
|
|
#ifdef USART_SAFE_INSERT
|
|
// If the buffer is full and the user defines USART_SAFE_INSERT,
|
|
// ignore new bytes.
|
|
rb_safe_insert(rb, c);
|
|
#else
|
|
// By default, push bytes around in the ring buffer.
|
|
rb_push_insert(rb, c);
|
|
#endif
|
|
#if ENABLED(EMERGENCY_PARSER)
|
|
if (serial.emergency_parser_enabled())
|
|
emergency_parser.update(serial.emergency_state, c);
|
|
#endif
|
|
}
|
|
}
|
|
else if (srflags & USART_SR_ORE) {
|
|
// overrun and empty data, just do a dummy read to clear ORE
|
|
// and prevent a raise condition where a continous interrupt stream (due to ORE set) occurs
|
|
// (see chapter "Overrun error" ) in STM32 reference manual
|
|
regs->DR;
|
|
}
|
|
|
|
// TXE signifies readiness to send a byte to DR.
|
|
if ((cr1its & USART_CR1_TXEIE) && (srflags & USART_SR_TXE)) {
|
|
if (!rb_is_empty(wb))
|
|
regs->DR=rb_remove(wb);
|
|
else
|
|
regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE
|
|
}
|
|
}
|
|
|
|
// Not every MarlinSerial port should handle emergency parsing.
|
|
// It would not make sense to parse GCode from TMC responses, for example.
|
|
constexpr bool serial_handles_emergency(int port) {
|
|
return false
|
|
#ifdef SERIAL_PORT
|
|
|| (SERIAL_PORT) == port
|
|
#endif
|
|
#ifdef SERIAL_PORT_2
|
|
|| (SERIAL_PORT_2) == port
|
|
#endif
|
|
#ifdef LCD_SERIAL_PORT
|
|
|| (LCD_SERIAL_PORT) == port
|
|
#endif
|
|
;
|
|
}
|
|
|
|
#define DEFINE_HWSERIAL_MARLIN(name, n) \
|
|
MarlinSerial name(USART##n, \
|
|
BOARD_USART##n##_TX_PIN, \
|
|
BOARD_USART##n##_RX_PIN, \
|
|
serial_handles_emergency(n)); \
|
|
extern "C" void __irq_usart##n(void) { \
|
|
my_usart_irq(USART##n->rb, USART##n->wb, USART##n##_BASE, MSerial##n); \
|
|
}
|
|
|
|
#define DEFINE_HWSERIAL_UART_MARLIN(name, n) \
|
|
MarlinSerial name(UART##n, \
|
|
BOARD_USART##n##_TX_PIN, \
|
|
BOARD_USART##n##_RX_PIN, \
|
|
serial_handles_emergency(n)); \
|
|
extern "C" void __irq_usart##n(void) { \
|
|
my_usart_irq(UART##n->rb, UART##n->wb, UART##n##_BASE, MSerial##n); \
|
|
}
|
|
|
|
// Instantiate all UARTs even if they are not needed
|
|
// This avoids a bunch of logic to figure out every serial
|
|
// port which may be in use on the system.
|
|
#if DISABLED(MKS_WIFI_MODULE)
|
|
DEFINE_HWSERIAL_MARLIN(MSerial1, 1);
|
|
#endif
|
|
DEFINE_HWSERIAL_MARLIN(MSerial2, 2);
|
|
DEFINE_HWSERIAL_MARLIN(MSerial3, 3);
|
|
#if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
|
|
DEFINE_HWSERIAL_UART_MARLIN(MSerial4, 4);
|
|
DEFINE_HWSERIAL_UART_MARLIN(MSerial5, 5);
|
|
#endif
|
|
|
|
// Check the type of each serial port by passing it to a template function.
|
|
// HardwareSerial is known to sometimes hang the controller when an error occurs,
|
|
// so this case will fail the static assert. All other classes are assumed to be ok.
|
|
template <typename T>
|
|
constexpr bool IsSerialClassAllowed(const T&) { return true; }
|
|
constexpr bool IsSerialClassAllowed(const HardwareSerial&) { return false; }
|
|
|
|
#define CHECK_CFG_SERIAL(A) static_assert(IsSerialClassAllowed(A), STRINGIFY(A) " is defined incorrectly");
|
|
#define CHECK_AXIS_SERIAL(A) static_assert(IsSerialClassAllowed(A##_HARDWARE_SERIAL), STRINGIFY(A) "_HARDWARE_SERIAL must be defined in the form MSerial1, rather than Serial1");
|
|
|
|
// If you encounter this error, replace SerialX with MSerialX, for example MSerial3.
|
|
|
|
// Non-TMC ports were already validated in HAL.h, so do not require verbose error messages.
|
|
#ifdef MYSERIAL0
|
|
CHECK_CFG_SERIAL(MYSERIAL0);
|
|
#endif
|
|
#ifdef MYSERIAL1
|
|
CHECK_CFG_SERIAL(MYSERIAL1);
|
|
#endif
|
|
#ifdef LCD_SERIAL
|
|
CHECK_CFG_SERIAL(LCD_SERIAL);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(X)
|
|
CHECK_AXIS_SERIAL(X);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(X2)
|
|
CHECK_AXIS_SERIAL(X2);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(Y)
|
|
CHECK_AXIS_SERIAL(Y);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(Y2)
|
|
CHECK_AXIS_SERIAL(Y2);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(Z)
|
|
CHECK_AXIS_SERIAL(Z);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(Z2)
|
|
CHECK_AXIS_SERIAL(Z2);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(Z3)
|
|
CHECK_AXIS_SERIAL(Z3);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(Z4)
|
|
CHECK_AXIS_SERIAL(Z4);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E0)
|
|
CHECK_AXIS_SERIAL(E0);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E1)
|
|
CHECK_AXIS_SERIAL(E1);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E2)
|
|
CHECK_AXIS_SERIAL(E2);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E3)
|
|
CHECK_AXIS_SERIAL(E3);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E4)
|
|
CHECK_AXIS_SERIAL(E4);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E5)
|
|
CHECK_AXIS_SERIAL(E5);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E6)
|
|
CHECK_AXIS_SERIAL(E6);
|
|
#endif
|
|
#if AXIS_HAS_HW_SERIAL(E7)
|
|
CHECK_AXIS_SERIAL(E7);
|
|
#endif
|
|
|
|
#endif // __STM32F1__
|