Firmware2/Marlin/src/MarlinCore.h
Scott Lahteine 852a8d6685 Configurable kill pin state
Co-Authored-By: AbdullahGheith <abdullahgheith@users.noreply.github.com>
2020-05-05 03:31:15 -05:00

128 lines
3.8 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "inc/MarlinConfig.h"
#ifdef DEBUG_GCODE_PARSER
#include "gcode/parser.h"
#endif
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
void stop();
// Pass true to keep steppers from timing out
void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep=false));
inline void idle_no_sleep() { idle(TERN_(ADVANCED_PAUSE_FEATURE, true)); }
#if ENABLED(EXPERIMENTAL_I2CBUS)
#include "feature/twibus.h"
extern TWIBus i2c;
#endif
#if ENABLED(G38_PROBE_TARGET)
extern uint8_t G38_move; // Flag to tell the ISR that G38 is in progress, and the type
extern bool G38_did_trigger; // Flag from the ISR to indicate the endstop changed
#endif
/**
* The axis order in all axis related arrays is X, Y, Z, E
*/
void enable_e_steppers();
void enable_all_steppers();
void disable_e_stepper(const uint8_t e);
void disable_e_steppers();
void disable_all_steppers();
void kill(PGM_P const lcd_error=nullptr, PGM_P const lcd_component=nullptr, const bool steppers_off=false);
void minkill(const bool steppers_off=false);
void quickstop_stepper();
// Global State of the firmware
enum MarlinState : uint8_t {
MF_INITIALIZING = 0,
MF_RUNNING = _BV(0),
MF_PAUSED = _BV(1),
MF_WAITING = _BV(2),
MF_STOPPED = _BV(3),
MF_SD_COMPLETE = _BV(4),
MF_KILLED = _BV(7)
};
extern MarlinState marlin_state;
inline bool IsRunning() { return marlin_state == MF_RUNNING; }
inline bool IsStopped() { return marlin_state != MF_RUNNING; }
bool printingIsActive();
bool printingIsPaused();
void startOrResumeJob();
extern bool wait_for_heatup;
#if HAS_RESUME_CONTINUE
extern bool wait_for_user;
void wait_for_user_response(millis_t ms=0, const bool no_sleep=false);
#endif
// Inactivity shutdown timer
extern millis_t max_inactive_time, stepper_inactive_time;
#if ENABLED(PSU_CONTROL)
extern bool powersupply_on;
#define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_HIGH); powersupply_on = true; }while(0)
#define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_HIGH); powersupply_on = false; }while(0)
#if ENABLED(AUTO_POWER_CONTROL)
#define PSU_ON() powerManager.power_on()
#define PSU_OFF() powerManager.power_off()
#else
#define PSU_ON() PSU_PIN_ON()
#define PSU_OFF() PSU_PIN_OFF()
#endif
#endif
bool pin_is_protected(const pin_t pin);
void protected_pin_err();
#if HAS_SUICIDE
inline void suicide() { OUT_WRITE(SUICIDE_PIN, SUICIDE_PIN_INVERTING); }
#endif
#if HAS_KILL
#ifndef KILL_PIN_STATE
#define KILL_PIN_STATE LOW
#endif
inline bool kill_state() { return READ(KILL_PIN) == KILL_PIN_STATE; }
#endif
#if ENABLED(G29_RETRY_AND_RECOVER)
void event_probe_recover();
void event_probe_failure();
#endif
extern const char NUL_STR[], M112_KILL_STR[], G28_STR[], M21_STR[], M23_STR[], M24_STR[],
SP_P_STR[], SP_T_STR[], SP_X_STR[], SP_Y_STR[], SP_Z_STR[], SP_E_STR[],
X_LBL[], Y_LBL[], Z_LBL[], E_LBL[], SP_X_LBL[], SP_Y_LBL[], SP_Z_LBL[], SP_E_LBL[];