Firmware2/Marlin/src/lcd/extui/dgus_lcd.cpp
2020-08-20 01:38:22 -05:00

151 lines
4.8 KiB
C++

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* dgus_lcd.cpp
*
* DGUS implementation for Marlin by coldtobi, Feb-May 2019
*/
#include "../../inc/MarlinConfigPre.h"
#if HAS_DGUS_LCD
#include "ui_api.h"
#include "lib/dgus/DGUSDisplay.h"
#include "lib/dgus/DGUSDisplayDef.h"
#include "lib/dgus/DGUSScreenHandler.h"
extern const char NUL_STR[];
namespace ExtUI {
void onStartup() {
dgusdisplay.InitDisplay();
ScreenHandler.UpdateScreenVPData();
}
void onIdle() { ScreenHandler.loop(); }
void onPrinterKilled(PGM_P const error, PGM_P const component) {
ScreenHandler.sendinfoscreen(GET_TEXT(MSG_HALTED), error, NUL_STR, GET_TEXT(MSG_PLEASE_RESET), true, true, true, true);
ScreenHandler.GotoScreen(DGUSLCD_SCREEN_KILL);
while (!ScreenHandler.loop()); // Wait while anything is left to be sent
}
void onMediaInserted() { TERN_(SDSUPPORT, ScreenHandler.SDCardInserted()); }
void onMediaError() { TERN_(SDSUPPORT, ScreenHandler.SDCardError()); }
void onMediaRemoved() { TERN_(SDSUPPORT, ScreenHandler.SDCardRemoved()); }
void onPlayTone(const uint16_t frequency, const uint16_t duration) {}
void onPrintTimerStarted() {}
void onPrintTimerPaused() {}
void onPrintTimerStopped() {}
void onFilamentRunout(const extruder_t extruder) {}
void onUserConfirmRequired(const char * const msg) {
if (msg) {
ScreenHandler.sendinfoscreen(PSTR("Please confirm."), nullptr, msg, nullptr, true, true, false, true);
ScreenHandler.SetupConfirmAction(ExtUI::setUserConfirmed);
ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP);
}
else if (ScreenHandler.getCurrentScreen() == DGUSLCD_SCREEN_POPUP ) {
ScreenHandler.SetupConfirmAction(nullptr);
ScreenHandler.PopToOldScreen();
}
}
void onStatusChanged(const char * const msg) { ScreenHandler.setstatusmessage(msg); }
void onFactoryReset() {}
void onStoreSettings(char *buff) {
// Called when saving to EEPROM (i.e. M500). If the ExtUI needs
// permanent data to be stored, it can write up to eeprom_data_size bytes
// into buff.
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct));
}
void onLoadSettings(const char *buff) {
// Called while loading settings from EEPROM. If the ExtUI
// needs to retrieve data, it should copy up to eeprom_data_size bytes
// from buff
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct));
}
void onConfigurationStoreWritten(bool success) {
// Called after the entire EEPROM has been written,
// whether successful or not.
}
void onConfigurationStoreRead(bool success) {
// Called after the entire EEPROM has been read,
// whether successful or not.
}
#if HAS_MESH
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
// Called when any mesh points are updated
}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {
// Called to indicate a special condition
}
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
void onPowerLossResume() {
// Called on resume from power-loss
ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POWER_LOSS);
}
#endif
#if HAS_PID_HEATING
void onPidTuning(const result_t rst) {
// Called for temperature PID tuning result
switch (rst) {
case PID_BAD_EXTRUDER_NUM:
ScreenHandler.setstatusmessagePGM(GET_TEXT(MSG_PID_BAD_EXTRUDER_NUM));
break;
case PID_TEMP_TOO_HIGH:
ScreenHandler.setstatusmessagePGM(GET_TEXT(MSG_PID_TEMP_TOO_HIGH));
break;
case PID_TUNING_TIMEOUT:
ScreenHandler.setstatusmessagePGM(GET_TEXT(MSG_PID_TIMEOUT));
break;
case PID_DONE:
ScreenHandler.setstatusmessagePGM(GET_TEXT(MSG_PID_AUTOTUNE_DONE));
break;
}
ScreenHandler.GotoScreen(DGUSLCD_SCREEN_MAIN);
}
#endif
}
#endif // HAS_DGUS_LCD