Firmware2/Marlin
nicolas-rambaud 37cde8a191 Report changes from previous PR from old code base including :
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
2015-03-23 12:29:12 +01:00
..
configurator Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
example_configurations fix bad insertion config again 2015-03-23 08:32:48 +01:00
fonts Add new (cleaner) Marlin font 2015-03-17 10:33:02 +01:00
scripts rename stepper lookup table scipt to be consistent with termistor lookup table script 2015-01-06 10:30:20 +01:00
BlinkM.cpp Cleanup of cardreader.* 2015-03-02 07:06:01 -08:00
BlinkM.h Cleanup of cardreader.* 2015-03-02 07:06:01 -08:00
boards.h Updated PR to streamline integration 2015-03-02 09:49:45 +00:00
cardreader.cpp Fix "Stop Print" function in the LCD menu 2015-03-19 14:16:18 -03:00
cardreader.h Cleanup of cardreader.* 2015-03-02 07:06:01 -08:00
Configuration_adv.h Merge branch 'Development' into marlin_configurator 2015-03-11 15:47:32 -07:00
Configuration.h Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
ConfigurationStore.cpp Don't add home offsets in G29 2015-03-21 16:30:02 -07:00
ConfigurationStore.h Cleanup of cardreader.* 2015-03-02 07:06:01 -08:00
digipot_mcp4451.cpp Cleanup of cardreader.* 2015-03-02 07:06:01 -08:00
dogm_font_data_ISO10646_1_Marlin.h Add new (cleaner) Marlin font 2015-03-17 10:33:02 +01:00
dogm_lcd_implementation.h Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify 2015-03-19 22:51:22 +01:00
DOGMbitmaps.h Replaced some literal constants with defines 2015-02-03 09:52:29 +01:00
fastio.h - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
language_an.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_ca.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_de.h Make exemplaric use of new display charsets in language_en.h and languag_de.h 2015-02-01 13:20:58 +01:00
language_en.h Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
language_es.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_eu.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_fi.h Fixed error in translation 2015-02-11 08:50:48 +02:00
language_fr.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_it.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_nl.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_pl.h Remove language strings that only add a number 2015-01-27 21:36:58 -08:00
language_pt-br.h Portuguese (pt) and Brazilian Portuguese (pt-br) 2015-01-27 21:45:21 -08:00
language_pt.h Changes for Portuguese too 2015-01-27 21:53:08 -08:00
language_ru.h Fix iss#1492 2015-02-16 13:53:58 +01:00
language.h Make sure a ROM is selected for ULTRA_LCD 2015-03-06 15:37:54 -08:00
LiquidCrystalRus.cpp Fix iss#1492 2015-02-16 13:53:58 +01:00
LiquidCrystalRus.h Enables support the Cyrillic alphabet for LCD 2012-10-12 19:06:43 +04:00
Makefile Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER. 2015-01-18 20:18:43 +03:00
Marlin_main.cpp Merge pull request #1662 from josla972/refactor_scara 2015-03-23 00:51:18 -07:00
Marlin.h Don't add home offsets in G29 2015-03-21 16:30:02 -07:00
Marlin.ino - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
Marlin.pde - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
MarlinSerial.cpp - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
MarlinSerial.h - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
mesh_bed_leveling.cpp Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
mesh_bed_leveling.h Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
motion_control.cpp Update motion_control.cpp 2014-10-04 09:24:09 +02:00
motion_control.h Removed interrupt nesting in the stepper ISR. 2011-11-27 21:12:55 +01:00
pins_3DRAG.h Issue #1504 – K8200 Z_ENABLE_PIN 2015-02-15 21:56:23 -08:00
pins_5DPRINT.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_99.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_AZTEEG_X1.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_AZTEEG_X3_PRO.h Merge branch 'Development' into fixup_ramps_boards 2015-02-19 17:26:22 -08:00
pins_AZTEEG_X3.h Azteeg X3 overrides too 2015-02-19 17:28:38 -08:00
pins_BAM_DICE_DUE.h Merge branch 'Development' into fixup_ramps_boards 2015-02-19 17:26:22 -08:00
pins_BRAINWAVE.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_CHEAPTRONIC.h Cleanup rotary encoder encrot* defines 2015-03-02 06:42:48 -08:00
pins_DUEMILANOVE_328P.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_ELEFU_3.h Cleanup rotary encoder encrot* defines 2015-03-02 06:42:48 -08:00
pins_FELIX2.h Minor fixes 2015-03-04 12:35:32 +00:00
pins_GEN3_MONOLITHIC.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN3_PLUS.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN6_DELUXE.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN6.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN7_12.h cleanup 2015-01-27 15:32:34 -08:00
pins_GEN7_13.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN7_14.h cleanup 2015-01-27 15:32:34 -08:00
pins_GEN7_CUSTOM.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_HEPHESTOS.h Merge branch 'Development' into fixup_ramps_boards 2015-02-19 17:26:22 -08:00
pins_K8200.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_LEAPFROG.h Max endstop pins disabled by configuration 2015-01-27 15:33:21 -08:00
pins_MEGATRONICS_1.h Cleanup rotary encoder encrot* defines 2015-03-02 06:42:48 -08:00
pins_MEGATRONICS_2.h Cleanup rotary encoder encrot* defines 2015-03-02 06:42:48 -08:00
pins_MEGATRONICS_3.h Cleanup rotary encoder encrot* defines 2015-03-02 06:42:48 -08:00
pins_MEGATRONICS.h Cleanup rotary encoder encrot* defines 2015-03-02 06:42:48 -08:00
pins_MELZI_1284.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_MELZI.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_OMCA_A.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_OMCA.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_PRINTRBOARD.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_RAMBO.h Cleanup rotary encoder encrot* defines 2015-03-02 06:42:48 -08:00
pins_RAMPS_13.h Filament Runout Sensor Feature 2015-03-07 22:43:15 +02:00
pins_RAMPS_OLD.h Max endstop pins disabled by configuration 2015-01-27 15:33:21 -08:00
pins_RUMBA.h Cleanup of temperature code 2015-02-24 04:46:11 -08:00
pins_SANGUINOLOLU_11.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_SANGUINOLOLU_12.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_SAV_MKI.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_SETHI.h cleanup 2015-01-27 15:32:34 -08:00
pins_STB_11.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_TEENSY2.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_TEENSYLU.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_ULTIMAIN_2.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_ULTIMAKER_OLD.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_ULTIMAKER.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_WITBOX.h Merge branch 'Development' into fixup_ramps_boards 2015-02-19 17:26:22 -08:00
pins.h Merge pull request #1546 from apollo-ng/pr-felix 2015-03-15 07:52:22 -07:00
planner.cpp Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-17 22:48:08 +01:00
planner.h Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-17 22:48:08 +01:00
qr_solve.cpp Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
qr_solve.h Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
Sd2Card.cpp - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
Sd2Card.h Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
Sd2PinMap.h - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
SdBaseFile.cpp Rename lastnr to autostart_index and... 2015-01-24 04:57:44 -08:00
SdBaseFile.h Pass sel to lcd_implementation_mark_as_selected 2015-03-19 13:40:36 -07:00
SdFatConfig.h Rename lastnr to autostart_index and... 2015-01-24 04:57:44 -08:00
SdFatStructs.h Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
SdFatUtil.cpp Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
SdFatUtil.h Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
SdFile.cpp Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
SdFile.h Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
SdInfo.h Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
SdVolume.cpp - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
SdVolume.h Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
Servo.cpp Formatting cleanup of quiet sources 2015-01-23 22:26:52 -08:00
Servo.h Formatting cleanup of quiet sources 2015-01-23 22:26:52 -08:00
speed_lookuptable.h Revert "Reduce PROGMEM warnings" 2015-01-16 16:48:22 +01:00
stepper_indirection.cpp - Add support for L6470 Drivers. 2015-02-27 12:43:23 +01:00
stepper_indirection.h - Add support for L6470 Drivers. 2015-02-27 12:43:23 +01:00
stepper.cpp Fix compile error with *_DUAL_STEPPER_DRIVERS 2015-03-21 16:43:47 -07:00
stepper.h - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
temperature.cpp Fix temperature min/max test 2015-03-21 14:23:43 -07:00
temperature.h Cleanup of temperature code 2015-02-24 04:46:11 -08:00
thermistortables.h Extend the idea of dummy temperature sensors. 2015-02-24 11:02:16 +01:00
ultralcd_implementation_hitachi_HD44780.h Fix hiliting of edit items 2015-03-20 04:29:35 -07:00
ultralcd_st7920_u8glib_rrd.h Update ultralcd_st7920_u8glib_rrd.h 2015-03-14 14:31:00 +01:00
ultralcd.cpp Report changes from previous PR from old code base including : 2015-03-23 12:29:12 +01:00
ultralcd.h - Rename WRITE_E_STEP for consistency 2015-03-14 04:28:22 -07:00
vector_3.cpp Fix decimal places in G29 Bed Equation Coeficients 2015-03-13 14:39:41 -03:00
vector_3.h Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
watchdog.cpp Fix compiling the watchdog error message when the manual reset watchdog is used. 2012-12-06 10:27:50 +01:00
watchdog.h Various typo fixes - only in comments, no code changes. 2014-02-17 10:58:36 +00:00