MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
8f7f7f7c45
Firmware2/Marlin/src/HAL/AVR/MarlinSerial.cpp
Scott Lahteine 118bd2f8b2
Apply loop shorthand macros (#17159)
2020-03-13 23:18:16 -05:00

793 lines
26 KiB
C++
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MarlinSerial.cpp - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* Modified 23 November 2006 by David A. Mellis
* Modified 28 September 2010 by Mark Sproul
* Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
* Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
* Modified 10 June 2018 by Eduardo José Tagle (See #10991)
* Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
*/
#ifdef __AVR__
// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
#include "../../inc/MarlinConfig.h"
#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
#include "MarlinSerial.h"
#include "../../MarlinCore.h"
template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
template<typename Cfg> bool MarlinSerial<Cfg>::_written = false;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::xon_xoff_state = MarlinSerial<Cfg>::XON_XOFF_CHAR_SENT | MarlinSerial<Cfg>::XON_CHAR;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::rx_dropped_bytes = 0;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::rx_buffer_overruns = 0;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::rx_framing_errors = 0;
template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::rx_max_enqueued = 0;
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() asm volatile("": : :"memory");
#include "../../feature/e_parser.h"
// "Atomically" read the RX head index value without disabling interrupts:
// This MUST be called with RX interrupts enabled, and CAN'T be called
// from the RX ISR itself!
template<typename Cfg>
FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_head() {
if (Cfg::RX_SIZE > 256) {
// Keep reading until 2 consecutive reads return the same value,
// meaning there was no update in-between caused by an interrupt.
// This works because serial RX interrupts happen at a slower rate
// than successive reads of a variable, so 2 consecutive reads with
// the same value means no interrupt updated it.
ring_buffer_pos_t vold, vnew = rx_buffer.head;
sw_barrier();
do {
vold = vnew;
vnew = rx_buffer.head;
sw_barrier();
} while (vold != vnew);
return vnew;
}
else {
// With an 8bit index, reads are always atomic. No need for special handling
return rx_buffer.head;
}
}
template<typename Cfg>
volatile bool MarlinSerial<Cfg>::rx_tail_value_not_stable = false;
template<typename Cfg>
volatile uint16_t MarlinSerial<Cfg>::rx_tail_value_backup = 0;
// Set RX tail index, taking into account the RX ISR could interrupt
// the write to this variable in the middle - So a backup strategy
// is used to ensure reads of the correct values.
// -Must NOT be called from the RX ISR -
template<typename Cfg>
FORCE_INLINE void MarlinSerial<Cfg>::atomic_set_rx_tail(typename MarlinSerial<Cfg>::ring_buffer_pos_t value) {
if (Cfg::RX_SIZE > 256) {
// Store the new value in the backup
rx_tail_value_backup = value;
sw_barrier();
// Flag we are about to change the true value
rx_tail_value_not_stable = true;
sw_barrier();
// Store the new value
rx_buffer.tail = value;
sw_barrier();
// Signal the new value is completely stored into the value
rx_tail_value_not_stable = false;
sw_barrier();
}
else
rx_buffer.tail = value;
}
// Get the RX tail index, taking into account the read could be
// interrupting in the middle of the update of that index value
// -Called from the RX ISR -
template<typename Cfg>
FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_tail() {
if (Cfg::RX_SIZE > 256) {
// If the true index is being modified, return the backup value
if (rx_tail_value_not_stable) return rx_tail_value_backup;
}
// The true index is stable, return it
return rx_buffer.tail;
}
// (called with RX interrupts disabled)
template<typename Cfg>
FORCE_INLINE void MarlinSerial<Cfg>::store_rxd_char() {
static EmergencyParser::State emergency_state; // = EP_RESET
// Get the tail - Nothing can alter its value while this ISR is executing, but there's
// a chance that this ISR interrupted the main process while it was updating the index.
// The backup mechanism ensures the correct value is always returned.
const ring_buffer_pos_t t = atomic_read_rx_tail();
// Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
ring_buffer_pos_t h = rx_buffer.head;
// Get the next element
ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// This must read the R_UCSRA register before reading the received byte to detect error causes
if (Cfg::DROPPED_RX && B_DOR && !++rx_dropped_bytes) --rx_dropped_bytes;
if (Cfg::RX_OVERRUNS && B_DOR && !++rx_buffer_overruns) --rx_buffer_overruns;
if (Cfg::RX_FRAMING_ERRORS && B_FE && !++rx_framing_errors) --rx_framing_errors;
// Read the character from the USART
uint8_t c = R_UDR;
if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the RX FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
--rx_dropped_bytes;
if (Cfg::MAX_RX_QUEUED) {
// Calculate count of bytes stored into the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// Keep track of the maximum count of enqueued bytes
NOLESS(rx_max_enqueued, rx_count);
}
if (Cfg::XONOFF) {
// If the last char that was sent was an XON
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
// Bytes stored into the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// If over 12.5% of RX buffer capacity, send XOFF before running out of
// RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
// and stop sending bytes. This translates to 13mS propagation time.
if (rx_count >= (Cfg::RX_SIZE) / 8) {
// At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
// Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
// to be in the middle of trying to disable the RX interrupt in the main program, eventually the
// enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
// the sending of the XOFF char is to send it HERE AND NOW.
// About to send the XOFF char
xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
// Wait until the TX register becomes empty and send it - Here there could be a problem
// - While waiting for the TX register to empty, the RX register could receive a new
// character. This must also handle that situation!
while (!B_UDRE) {
if (B_RXC) {
// A char arrived while waiting for the TX buffer to be empty - Receive and process it!
i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// Read the character from the USART
c = R_UDR;
if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
--rx_dropped_bytes;
}
sw_barrier();
}
R_UDR = XOFF_CHAR;
// Clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
B_TXC = 1;
// At this point there could be a race condition between the write() function
// and this sending of the XOFF char. This interrupt could happen between the
// wait to be empty TX buffer loop and the actual write of the character. Since
// the TX buffer is full because it's sending the XOFF char, the only way to be
// sure the write() function will succeed is to wait for the XOFF char to be
// completely sent. Since an extra character could be received during the wait
// it must also be handled!
while (!B_UDRE) {
if (B_RXC) {
// A char arrived while waiting for the TX buffer to be empty - Receive and process it!
i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// Read the character from the USART
c = R_UDR;
if (Cfg::EMERGENCYPARSER)
emergency_parser.update(emergency_state, c);
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
--rx_dropped_bytes;
}
sw_barrier();
}
// At this point everything is ready. The write() function won't
// have any issues writing to the UART TX register if it needs to!
}
}
}
// Store the new head value - The main loop will retry until the value is stable
rx_buffer.head = h;
}
// (called with TX irqs disabled)
template<typename Cfg>
FORCE_INLINE void MarlinSerial<Cfg>::_tx_udr_empty_irq() {
if (Cfg::TX_SIZE > 0) {
// Read positions
uint8_t t = tx_buffer.tail;
const uint8_t h = tx_buffer.head;
if (Cfg::XONOFF) {
// If an XON char is pending to be sent, do it now
if (xon_xoff_state == XON_CHAR) {
// Send the character
R_UDR = XON_CHAR;
// clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
B_TXC = 1;
// Remember we sent it.
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
// If nothing else to transmit, just disable TX interrupts.
if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
return;
}
}
// If nothing to transmit, just disable TX interrupts. This could
// happen as the result of the non atomicity of the disabling of RX
// interrupts that could end reenabling TX interrupts as a side effect.
if (h == t) {
B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
return;
}
// There is something to TX, Send the next byte
const uint8_t c = tx_buffer.buffer[t];
t = (t + 1) & (Cfg::TX_SIZE - 1);
R_UDR = c;
tx_buffer.tail = t;
// Clear the TXC bit (by writing a one to its bit location).
// Ensures flush() won't return until the bytes are actually written/
B_TXC = 1;
// Disable interrupts if there is nothing to transmit following this byte
if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
}
}
// Public Methods
template<typename Cfg>
void MarlinSerial<Cfg>::begin(const long baud) {
uint16_t baud_setting;
bool useU2X = true;
#if F_CPU == 16000000UL && SERIAL_PORT == 0
// Hard-coded exception for compatibility with the bootloader shipped
// with the Duemilanove and previous boards, and the firmware on the
// 8U2 on the Uno and Mega 2560.
if (baud == 57600) useU2X = false;
#endif
R_UCSRA = 0;
if (useU2X) {
B_U2X = 1;
baud_setting = (F_CPU / 4 / baud - 1) / 2;
}
else
baud_setting = (F_CPU / 8 / baud - 1) / 2;
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
R_UBRRH = baud_setting >> 8;
R_UBRRL = baud_setting;
B_RXEN = 1;
B_TXEN = 1;
B_RXCIE = 1;
if (Cfg::TX_SIZE > 0) B_UDRIE = 0;
_written = false;
}
template<typename Cfg>
void MarlinSerial<Cfg>::end() {
B_RXEN = 0;
B_TXEN = 0;
B_RXCIE = 0;
B_UDRIE = 0;
}
template<typename Cfg>
int MarlinSerial<Cfg>::peek() {
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return h == t ? -1 : rx_buffer.buffer[t];
}
template<typename Cfg>
int MarlinSerial<Cfg>::read() {
const ring_buffer_pos_t h = atomic_read_rx_head();
// Read the tail. Main thread owns it, so it is safe to directly read it
ring_buffer_pos_t t = rx_buffer.tail;
// If nothing to read, return now
if (h == t) return -1;
// Get the next char
const int v = rx_buffer.buffer[t];
t = (ring_buffer_pos_t)(t + 1) & (Cfg::RX_SIZE - 1);
// Advance tail - Making sure the RX ISR will always get an stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(t);
if (Cfg::XONOFF) {
// If the XOFF char was sent, or about to be sent...
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
// Get count of bytes in the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
if (rx_count < (Cfg::RX_SIZE) / 10) {
if (Cfg::TX_SIZE > 0) {
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX ISR. Non atomic, but it will eventually enable them
B_UDRIE = 1;
}
else {
// If not using TX interrupts, we must send the XON char now
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
while (!B_UDRE) sw_barrier();
R_UDR = XON_CHAR;
}
}
}
}
return v;
}
template<typename Cfg>
typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available() {
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return (ring_buffer_pos_t)(Cfg::RX_SIZE + h - t) & (Cfg::RX_SIZE - 1);
}
template<typename Cfg>
void MarlinSerial<Cfg>::flush() {
// Set the tail to the head:
// - Read the RX head index in a safe way. (See atomic_read_rx_head.)
// - Set the tail, making sure the RX ISR will always get a stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(atomic_read_rx_head());
if (Cfg::XONOFF) {
// If the XOFF char was sent, or about to be sent...
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
if (Cfg::TX_SIZE > 0) {
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX ISR. Non atomic, but it will eventually enable it.
B_UDRIE = 1;
}
else {
// If not using TX interrupts, we must send the XON char now
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
while (!B_UDRE) sw_barrier();
R_UDR = XON_CHAR;
}
}
}
}
template<typename Cfg>
void MarlinSerial<Cfg>::write(const uint8_t c) {
if (Cfg::TX_SIZE == 0) {
_written = true;
while (!B_UDRE) sw_barrier();
R_UDR = c;
}
else {
_written = true;
// If the TX interrupts are disabled and the data register
// is empty, just write the byte to the data register and
// be done. This shortcut helps significantly improve the
// effective datarate at high (>500kbit/s) bitrates, where
// interrupt overhead becomes a slowdown.
// Yes, there is a race condition between the sending of the
// XOFF char at the RX ISR, but it is properly handled there
if (!B_UDRIE && B_UDRE) {
R_UDR = c;
// clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
B_TXC = 1;
return;
}
const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
// Make room by polling if it is possible to transmit, and do so!
while (i == tx_buffer.tail) {
// If we can transmit another byte, do it.
if (B_UDRE) _tx_udr_empty_irq();
// Make sure compiler rereads tx_buffer.tail
sw_barrier();
}
}
else {
// Interrupts are enabled, just wait until there is space
while (i == tx_buffer.tail) sw_barrier();
}
// Store new char. head is always safe to move
tx_buffer.buffer[tx_buffer.head] = c;
tx_buffer.head = i;
// Enable TX ISR - Non atomic, but it will eventually enable TX ISR
B_UDRIE = 1;
}
}
template<typename Cfg>
void MarlinSerial<Cfg>::flushTX() {
if (Cfg::TX_SIZE == 0) {
// No bytes written, no need to flush. This special case is needed since there's
// no way to force the TXC (transmit complete) bit to 1 during initialization.
if (!_written) return;
// Wait until everything was transmitted
while (!B_TXC) sw_barrier();
// At this point nothing is queued anymore (DRIE is disabled) and
// the hardware finished transmission (TXC is set).
}
else {
// No bytes written, no need to flush. This special case is needed since there's
// no way to force the TXC (transmit complete) bit to 1 during initialization.
if (!_written) return;
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
// Wait until everything was transmitted - We must do polling, as interrupts are disabled
while (tx_buffer.head != tx_buffer.tail || !B_TXC) {
// If there is more space, send an extra character
if (B_UDRE) _tx_udr_empty_irq();
sw_barrier();
}
}
else {
// Wait until everything was transmitted
while (tx_buffer.head != tx_buffer.tail || !B_TXC) sw_barrier();
}
// At this point nothing is queued anymore (DRIE is disabled) and
// the hardware finished transmission (TXC is set).
}
}
/**
* Imports from print.h
*/
template<typename Cfg>
void MarlinSerial<Cfg>::print(char c, int base) {
print((long)c, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(unsigned char b, int base) {
print((unsigned long)b, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(int n, int base) {
print((long)n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(unsigned int n, int base) {
print((unsigned long)n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(long n, int base) {
if (base == 0) write(n);
else if (base == 10) {
if (n < 0) { print('-'); n = -n; }
printNumber(n, 10);
}
else
printNumber(n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(unsigned long n, int base) {
if (base == 0) write(n);
else printNumber(n, base);
}
template<typename Cfg>
void MarlinSerial<Cfg>::print(double n, int digits) {
printFloat(n, digits);
}
template<typename Cfg>
void MarlinSerial<Cfg>::println() {
print('\r');
print('\n');
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(const String& s) {
print(s);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(const char c[]) {
print(c);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(char c, int base) {
print(c, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(unsigned char b, int base) {
print(b, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(int n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(unsigned int n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(long n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(unsigned long n, int base) {
print(n, base);
println();
}
template<typename Cfg>
void MarlinSerial<Cfg>::println(double n, int digits) {
print(n, digits);
println();
}
// Private Methods
template<typename Cfg>
void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
if (n) {
unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
int8_t i = 0;
while (n) {
buf[i++] = n % base;
n /= base;
}
while (i--)
print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
}
else
print('0');
}
template<typename Cfg>
void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
// Handle negative numbers
if (number < 0.0) {
print('-');
number = -number;
}
// Round correctly so that print(1.999, 2) prints as "2.00"
double rounding = 0.5;
LOOP_L_N(i, digits) rounding *= 0.1;
number += rounding;
// Extract the integer part of the number and print it
unsigned long int_part = (unsigned long)number;
double remainder = number - (double)int_part;
print(int_part);
// Print the decimal point, but only if there are digits beyond
if (digits) {
print('.');
// Extract digits from the remainder one at a time
while (digits--) {
remainder *= 10.0;
int toPrint = int(remainder);
print(toPrint);
remainder -= toPrint;
}
}
}
// Hookup ISR handlers
ISR(SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
// Instantiate
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
#ifdef SERIAL_PORT_2
// Hookup ISR handlers
ISR(SERIAL_REGNAME(USART,SERIAL_PORT_2,_RX_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,SERIAL_PORT_2,_UDRE_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
// Instantiate
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
#endif
#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
#ifdef INTERNAL_SERIAL_PORT
ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_RX_vect)) {
MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_UDRE_vect)) {
MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>;
// Instantiate
MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
#endif
#ifdef DGUS_SERIAL_PORT
template<typename Cfg>
typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
const ring_buffer_pos_t t = tx_buffer.tail, // next byte to send.
h = tx_buffer.head; // next pos for queue.
int ret = t - h - 1;
if (ret < 0) ret += Cfg::TX_SIZE + 1;
return ret;
}
ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_RX_vect)) {
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_UDRE_vect)) {
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>;
// Instantiate
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
#endif
// For AT90USB targets use the UART for BT interfacing
#if defined(USBCON) && ENABLED(BLUETOOTH)
HardwareSerial bluetoothSerial;
#endif
#endif // __AVR__
Reference in New Issue View Git Blame Copy Permalink