Firmware2/Marlin/src/HAL/HAL_STM32F7
2019-06-27 23:58:16 -05:00
..
EEPROM_Emul Update some headers 2019-04-12 13:04:04 -05:00
EmulatedEeprom.cpp Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
endstop_interrupts.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
fastio_STM32F7.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
HAL_Servo_STM32F7.cpp Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
HAL_Servo_STM32F7.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
HAL_spi_STM32F7.cpp Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
HAL_timers_STM32F7.cpp Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
HAL_timers_STM32F7.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
HAL.cpp Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
HAL.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
persistent_store_eeprom.cpp Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
pinsDebug.h Use a macro for HAL header redirection (#10380) 2018-04-12 20:25:08 -05:00
README.md Clean up trailing whitespace 2018-01-21 17:19:38 -06:00
SanityCheck.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
spi_pins.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
TMC2660.cpp Fix some HAL includes 2019-05-25 19:20:17 -05:00
TMC2660.h TMC2660.h comment tweaks 2019-03-01 00:25:22 -06:00
watchdog_STM32F7.cpp Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
watchdog_STM32F7.h Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00

This HAL is for the STM32F765 board "The Borg" used with STM32Generic Arduino core by danieleff.

Original core is located at:

https://github.com/danieleff/STM32GENERIC

but i have not committed the changes needed for the Borg there yet, so please use:

https://github.com/Spawn32/STM32GENERIC

Unzip it into [Arduino]/hardware folder

Download the latest GNU ARM Embedded Toolchain:

https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads

(The one in Arduino dosen't support STM32F7).

Change compiler.path in platform.txt to point to that you downloaded.

This HAL is in development.

Currently only tested on "The Borg".

You will also need the latest Arduino 1.9.0-beta or newer.

This HAL is a modified version of Chris Barr's Picoprint STM32F4 HAL, so shouldn't be to hard to get it to work on a F4.