Firmware2/Marlin/language_es.h
2016-10-02 06:34:56 -05:00

213 lines
11 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Spanish
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_ES_H
#define LANGUAGE_ES_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " lista."
#define MSG_SD_INSERTED "Tarjeta colocada"
#define MSG_SD_REMOVED "Tarjeta retirada"
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
#define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART "Inicio automatico"
#define MSG_DISABLE_STEPPERS "Apagar motores"
#define MSG_AUTO_HOME "Llevar al origen"
#define MSG_AUTO_HOME_X "Origen X"
#define MSG_AUTO_HOME_Y "Origen Y"
#define MSG_AUTO_HOME_Z "Origen Z"
#define MSG_LEVEL_BED_HOMING "Origen XYZ"
#define MSG_LEVEL_BED_WAITING "Iniciar (Presione)"
#define MSG_LEVEL_BED_DONE "Nivelacion lista!"
#define MSG_LEVEL_BED_CANCEL "Cancelar"
#define MSG_SET_HOME_OFFSETS "Ajustar desfases"
#define MSG_HOME_OFFSETS_APPLIED "Desfase aplicado"
#define MSG_SET_ORIGIN "Establecer origen"
#define MSG_PREHEAT_1 "Precalentar PLA"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 "Todo"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1"Plataforma"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 "Config"
#define MSG_PREHEAT_2 "Precalentar ABS"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 "Todo"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 "Plataforma"
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 "Config"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Encender"
#define MSG_SWITCH_PS_OFF "Apagar"
#define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer"
#define MSG_MOVE_AXIS "Mover ejes"
#define MSG_LEVEL_BED "Nivelar plataforma"
#define MSG_MOVE_X "Mover X"
#define MSG_MOVE_Y "Mover Y"
#define MSG_MOVE_Z "Mover Z"
#define MSG_MOVE_E "Extrusor"
#define MSG_MOVE_01MM "Mover 0.1mm"
#define MSG_MOVE_1MM "Mover 1mm"
#define MSG_MOVE_10MM "Mover 10mm"
#define MSG_SPEED "Velocidad"
#define MSG_BED_Z "Plataforma Z"
#define MSG_NOZZLE "Boquilla"
#define MSG_BED "Plataforma"
#define MSG_FAN_SPEED "Ventilador"
#define MSG_FLOW "Flujo"
#define MSG_CONTROL "Control"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Temperatura Auto."
#define MSG_ON "Encender"
#define MSG_OFF "Apagar"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Aceleracion"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vel. viaje min"
#define MSG_AMAX "Acel. max"
#define MSG_A_RETRACT "Acel. retrac."
#define MSG_A_TRAVEL "Acel. Viaje"
#define MSG_XSTEPS "X pasos/mm"
#define MSG_YSTEPS "Y pasos/mm"
#define MSG_ZSTEPS "Z pasos/mm"
#define MSG_ESTEPS "E pasos/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimiento"
#define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Contraste"
#define MSG_STORE_EPROM "Guardar memoria"
#define MSG_LOAD_EPROM "Cargar memoria"
#define MSG_RESTORE_FAILSAFE "Restaurar memoria"
#define MSG_REFRESH "Volver a cargar"
#define MSG_WATCH "Informacion"
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Ajustar"
#define MSG_PAUSE_PRINT "Pausar impresion"
#define MSG_RESUME_PRINT "Reanudar impresion"
#define MSG_STOP_PRINT "Detener impresion"
#define MSG_CARD_MENU "Menu de SD"
#define MSG_NO_CARD "No hay tarjeta SD"
#define MSG_DWELL "Reposo..."
#define MSG_USERWAIT "Esperando ordenes"
#define MSG_RESUMING "Resumiendo impre."
#define MSG_PRINT_ABORTED "Impresion cancelada"
#define MSG_NO_MOVE "Sin movimiento"
#define MSG_KILLED "Parada de emergencia"
#define MSG_STOPPED "Detenida"
#define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACT_SWAP "Interc. Retraer mm"
#define MSG_CONTROL_RETRACTF "Retraer V"
#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Interc. DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet V"
#define MSG_AUTORETRACT "Retraccion Auto."
#define MSG_FILAMENTCHANGE "Cambiar filamento"
#define MSG_INIT_SDCARD "Iniciando tarjeta"
#define MSG_CNG_SDCARD "Cambiar tarjeta"
#define MSG_ZPROBE_OUT "Sonda Z fuera"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_ZPROBE_ZOFFSET "Desfase Z"
#define MSG_BABYSTEP_X "Micropaso X"
#define MSG_BABYSTEP_Y "Micropaso Y"
#define MSG_BABYSTEP_Z "Micropaso Z"
#define MSG_ENDSTOP_ABORT "Cancelado - Endstop"
#define MSG_HEATING_FAILED_LCD "Error: al calentar"
#define MSG_ERR_REDUNDANT_TEMP "Error: temperatura"
#define MSG_THERMAL_RUNAWAY "Error de temperatura"
#define MSG_ERR_MAXTEMP "Error: Temp Maxima"
#define MSG_ERR_MINTEMP "Error: Temp Minima"
#define MSG_ERR_MAXTEMP_BED "Error: Temp Max Plat"
#define MSG_ERR_MINTEMP_BED "Error: Temp Min Plat"
#define MSG_HEATING "Calentando..."
#define MSG_HEATING_COMPLETE "Calentamiento listo"
#define MSG_BED_HEATING "Calentando Plat..."
#define MSG_BED_DONE "Plataforma Caliente"
#define MSG_DELTA_CALIBRATE "Calibracion Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
#define MSG_DELTA_CALIBRATE_Y "Calibrar Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrar Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrar Centro"
#define MSG_INFO_MENU "Inf. Impresora"
#define MSG_INFO_PRINTER_MENU "Inf. Impresora"
#define MSG_INFO_STATS_MENU "Estadisticas Imp."
#define MSG_INFO_BOARD_MENU "Inf. Controlador"
#define MSG_INFO_THERMISTOR_MENU "Termistores"
#define MSG_INFO_EXTRUDERS "Extrusores"
#define MSG_INFO_BAUDRATE "Baudios"
#define MSG_INFO_PROTOCOL "Protocolo"
#define MSG_INFO_PRINT_COUNT "Conteo de impresion"
#define MSG_INFO_COMPLETED_PRINTS "Completadas"
#define MSG_INFO_PRINT_TIME "Tiempo total de imp."
#define MSG_INFO_PRINT_LONGEST "Impresion mas larga"
#define MSG_INFO_PRINT_FILAMENT "Total de Extrusion"
#define MSG_INFO_PRINT_COUNT "Impresiones"
#define MSG_INFO_COMPLETED_PRINTS "Completadas"
#define MSG_INFO_PRINT_TIME "Total"
#define MSG_INFO_PRINT_LONGEST "Mas larga"
#define MSG_INFO_PRINT_FILAMENT "Extrusion"
#define MSG_INFO_MIN_TEMP "Temperatura minima"
#define MSG_INFO_MAX_TEMP "Temperatura maxima"
#define MSG_INFO_PSU "Fuente de poder"
#define MSG_FILAMENT_CHANGE_HEADER "Cambiar Filamento"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "Opciones de cambio:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruir mas"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resumir imp."
#define MSG_FILAMENT_CHANGE_INIT_1 "Esperando iniciar"
#define MSG_FILAMENT_CHANGE_INIT_2 "del filamento"
#define MSG_FILAMENT_CHANGE_INIT_3 "cambiar"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Esperado por"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filamento expulsado"
#define MSG_FILAMENT_CHANGE_UNLOAD_3 ""
#define MSG_FILAMENT_CHANGE_INSERT_1 "Inserte filamento"
#define MSG_FILAMENT_CHANGE_INSERT_2 "y presione el boton"
#define MSG_FILAMENT_CHANGE_INSERT_3 "para continuar..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Esperado por"
#define MSG_FILAMENT_CHANGE_LOAD_2 "Cargar filamento"
#define MSG_FILAMENT_CHANGE_LOAD_3 ""
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Esperado por"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "Extruir filamento"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 ""
#define MSG_FILAMENT_CHANGE_RESUME_1 "Esperando imp."
#define MSG_FILAMENT_CHANGE_RESUME_2 "para resumir"
#define MSG_FILAMENT_CHANGE_RESUME_3 ""
#endif // LANGUAGE_ES_H