Firmware2/Marlin/src/pins/sam/pins_RAMPS4DUE.h
Scott Lahteine bfad23d3e2 (c) 2020
2020-02-03 08:00:57 -06:00

57 lines
1.8 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Arduino Mega or Due with RAMPS4DUE pin assignments
*
* Applies to the following boards:
*
* RAMPS4DUE_EFB (Hotend, Fan, Bed)
* RAMPS4DUE_EEB (Hotend0, Hotend1, Bed)
* RAMPS4DUE_EFF (Hotend, Fan0, Fan1)
* RAMPS4DUE_EEF (Hotend0, Hotend1, Fan)
* RAMPS4DUE_SF (Spindle, Controller Fan)
*
* Differences between
* RAMPS_14 | RAMPS4DUE
* A13 | A9/D63 (shares the same pin with AUX2_4PIN)
* A14 | A10/D64 (shares the same pin with AUX2_5PIN)
* A15 | NC
*/
#if !defined(__SAM3X8E__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_INFO_NAME "RAMPS4DUE"
#define IS_RAMPS4DUE
//
// Temperature Sensors
//
#define TEMP_0_PIN 9 // Analog Input
#define TEMP_1_PIN -1 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
#include "../ramps/pins_RAMPS.h"