437 lines
27 KiB
C
437 lines
27 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* Italian
|
|
*
|
|
* LCD Menu Messages
|
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|
*
|
|
*/
|
|
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
#define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.")
|
|
#define MSG_BACK _UxGT("Indietro")
|
|
#define MSG_SD_INSERTED _UxGT("SD Card inserita")
|
|
#define MSG_SD_REMOVED _UxGT("SD Card rimossa")
|
|
#define MSG_LCD_ENDSTOPS _UxGT("Finecor.") // Max 8 caratteri
|
|
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Finecorsa Soft")
|
|
#define MSG_MAIN _UxGT("Menu principale")
|
|
#define MSG_ADVANCED_SETTINGS _UxGT("Impostaz. avanzate")
|
|
#define MSG_CONFIGURATION _UxGT("Configurazione")
|
|
#define MSG_AUTOSTART _UxGT("Autostart")
|
|
#define MSG_DISABLE_STEPPERS _UxGT("Disabilita Motori")
|
|
#define MSG_DEBUG_MENU _UxGT("Menu di debug")
|
|
#define MSG_PROGRESS_BAR_TEST _UxGT("Test barra avanzam.")
|
|
#define MSG_AUTO_HOME _UxGT("Auto Home")
|
|
#define MSG_AUTO_HOME_X _UxGT("Home asse X")
|
|
#define MSG_AUTO_HOME_Y _UxGT("Home asse Y")
|
|
#define MSG_AUTO_HOME_Z _UxGT("Home asse Z")
|
|
#define MSG_AUTO_Z_ALIGN _UxGT("Allineam.automat. Z")
|
|
#define MSG_TMC_Z_CALIBRATION _UxGT("Calibra Z")
|
|
#define MSG_LEVEL_BED_HOMING _UxGT("Home assi XYZ")
|
|
#define MSG_LEVEL_BED_WAITING _UxGT("Premi per iniziare")
|
|
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Punto successivo")
|
|
#define MSG_LEVEL_BED_DONE _UxGT("Livel. terminato!")
|
|
#define MSG_Z_FADE_HEIGHT _UxGT("Fade Height")
|
|
#define MSG_SET_HOME_OFFSETS _UxGT("Imp. offset home")
|
|
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset applicato")
|
|
#define MSG_SET_ORIGIN _UxGT("Imposta Origine")
|
|
#define MSG_PREHEAT_1 _UxGT("Preriscalda " PREHEAT_1_LABEL)
|
|
#define MSG_PREHEAT_1_N _UxGT("Preris." PREHEAT_1_LABEL " ")
|
|
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("Tutto")
|
|
#define MSG_PREHEAT_1_END MSG_PREHEAT_1_N _UxGT("Ugello")
|
|
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Piatto")
|
|
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1_N _UxGT("conf")
|
|
#define MSG_PREHEAT_2 _UxGT("Preriscalda " PREHEAT_2_LABEL)
|
|
#define MSG_PREHEAT_2_N _UxGT("Preris." PREHEAT_2_LABEL " ")
|
|
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("Tutto")
|
|
#define MSG_PREHEAT_2_END MSG_PREHEAT_2_N _UxGT("Ugello")
|
|
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Piatto")
|
|
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2_N _UxGT("conf")
|
|
#define MSG_PREHEAT_CUSTOM _UxGT("Prerisc.personal.")
|
|
#define MSG_COOLDOWN _UxGT("Raffredda")
|
|
#define MSG_SWITCH_PS_ON _UxGT("Accendi aliment.")
|
|
#define MSG_SWITCH_PS_OFF _UxGT("Spegni aliment.")
|
|
#define MSG_EXTRUDE _UxGT("Estrudi")
|
|
#define MSG_RETRACT _UxGT("Ritrai")
|
|
#define MSG_MOVE_AXIS _UxGT("Muovi Asse")
|
|
#define MSG_BED_LEVELING _UxGT("Livella piano")
|
|
#define MSG_LEVEL_BED MSG_BED_LEVELING
|
|
#define MSG_LEVEL_CORNERS _UxGT("Livella spigoli")
|
|
#define MSG_NEXT_CORNER _UxGT("Prossimo spigolo")
|
|
#define MSG_EDITING_STOPPED _UxGT("Modif. Mesh Fermata")
|
|
#define MSG_MESH_X _UxGT("Indice X")
|
|
#define MSG_MESH_Y _UxGT("Indice Y")
|
|
#define MSG_MESH_EDIT_Z _UxGT("Valore di Z")
|
|
#define MSG_USER_MENU _UxGT("Comandi personaliz.")
|
|
#define MSG_UBL_DOING_G29 _UxGT("G29 in corso")
|
|
#define MSG_UBL_UNHOMED _UxGT("Home XYZ prima")
|
|
#define MSG_UBL_TOOLS _UxGT("Strumenti UBL")
|
|
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
|
|
#define MSG_IDEX_MENU _UxGT("Modo IDEX")
|
|
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park")
|
|
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplicazione")
|
|
#define MSG_IDEX_MODE_SCALED_COPY _UxGT("Copia scalata")
|
|
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Pieno controllo")
|
|
#define MSG_IDEX_X_OFFSET _UxGT("2° ugello X")
|
|
#define MSG_IDEX_Y_OFFSET _UxGT("2° ugello Y")
|
|
#define MSG_IDEX_Z_OFFSET _UxGT("2° ugello Z")
|
|
#define MSG_IDEX_SAVE_OFFSETS _UxGT("Memorizza Offsets")
|
|
#define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale")
|
|
#define MSG_UBL_BC_INSERT _UxGT("Metti spes. e misura")
|
|
#define MSG_UBL_BC_INSERT2 _UxGT("Misura")
|
|
#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi e mis.piatto")
|
|
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento succes.")
|
|
#define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL")
|
|
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL")
|
|
#define MSG_UBL_SET_TEMP_BED _UxGT("Temp. Piatto")
|
|
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
|
|
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Temp. Ugello")
|
|
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
|
|
#define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh")
|
|
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif.Mesh personal.")
|
|
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh")
|
|
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Modif.Mesh fatta")
|
|
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Mesh personal.")
|
|
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh")
|
|
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Crea Mesh " PREHEAT_1_LABEL)
|
|
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Crea Mesh " PREHEAT_2_LABEL)
|
|
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Crea Mesh a freddo")
|
|
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Aggiusta Alt. Mesh")
|
|
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Altezza")
|
|
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh")
|
|
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Valida Mesh " PREHEAT_1_LABEL)
|
|
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Valida Mesh " PREHEAT_2_LABEL)
|
|
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Mesh pers.")
|
|
#define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh")
|
|
#define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh")
|
|
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti")
|
|
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Livell. Griglia Mesh")
|
|
#define MSG_UBL_MESH_LEVEL _UxGT("Livella Mesh")
|
|
#define MSG_UBL_SIDE_POINTS _UxGT("Punti laterali")
|
|
#define MSG_UBL_MAP_TYPE _UxGT("Tipo di Mappa")
|
|
#define MSG_UBL_OUTPUT_MAP _UxGT("Esporta Mappa")
|
|
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Esporta per Host")
|
|
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Esporta in CSV")
|
|
#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Backup esterno")
|
|
#define MSG_UBL_INFO_UBL _UxGT("Esporta Info UBL")
|
|
#define MSG_EDIT_MESH _UxGT("Modifica Mesh")
|
|
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Riempimento")
|
|
#define MSG_UBL_MANUAL_FILLIN _UxGT("Riempimento Manuale")
|
|
#define MSG_UBL_SMART_FILLIN _UxGT("Riempimento Smart")
|
|
#define MSG_UBL_FILLIN_MESH _UxGT("Riempimento Mesh")
|
|
#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalida Tutto")
|
|
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalid.Punto Vicino")
|
|
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Ritocca All")
|
|
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ritocca Punto Vicino")
|
|
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Salvate")
|
|
#define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria")
|
|
#define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto")
|
|
#define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto")
|
|
#define MSG_MESH_LOADED _UxGT("Mesh %i caricata")
|
|
#define MSG_MESH_SAVED _UxGT("Mesh %i salvata")
|
|
#define MSG_NO_STORAGE _UxGT("Nessuna memoria")
|
|
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL")
|
|
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL")
|
|
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato")
|
|
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo passo")
|
|
|
|
#define MSG_LED_CONTROL _UxGT("Controllo LED")
|
|
#define MSG_LEDS _UxGT("Luci")
|
|
#define MSG_LED_PRESETS _UxGT("Preset luce")
|
|
#define MSG_SET_LEDS_RED _UxGT("Rosso")
|
|
#define MSG_SET_LEDS_ORANGE _UxGT("Arancione")
|
|
#define MSG_SET_LEDS_YELLOW _UxGT("Giallo")
|
|
#define MSG_SET_LEDS_GREEN _UxGT("Verde")
|
|
#define MSG_SET_LEDS_BLUE _UxGT("Blu")
|
|
#define MSG_SET_LEDS_INDIGO _UxGT("Indaco")
|
|
#define MSG_SET_LEDS_VIOLET _UxGT("Viola")
|
|
#define MSG_SET_LEDS_WHITE _UxGT("Bianco")
|
|
#define MSG_SET_LEDS_DEFAULT _UxGT("Predefinito")
|
|
#define MSG_CUSTOM_LEDS _UxGT("Luci personalizzate")
|
|
#define MSG_INTENSITY_R _UxGT("Intensità rosso")
|
|
#define MSG_INTENSITY_G _UxGT("Intensità verde")
|
|
#define MSG_INTENSITY_B _UxGT("Intensità blu")
|
|
#define MSG_INTENSITY_W _UxGT("Intensità bianco")
|
|
#define MSG_LED_BRIGHTNESS _UxGT("Luminosità")
|
|
|
|
#define MSG_MOVING _UxGT("In movimento...")
|
|
#define MSG_FREE_XY _UxGT("XY liberi")
|
|
#define MSG_MOVE_X _UxGT("Muovi X")
|
|
#define MSG_MOVE_Y _UxGT("Muovi Y")
|
|
#define MSG_MOVE_Z _UxGT("Muovi Z")
|
|
#define MSG_MOVE_E _UxGT("Estrusore")
|
|
#define MSG_HOTEND_TOO_COLD _UxGT("Ugello freddo")
|
|
#define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm")
|
|
#define MSG_MOVE_1MM _UxGT("Muovi di 1mm")
|
|
#define MSG_MOVE_10MM _UxGT("Muovi di 10mm")
|
|
#define MSG_SPEED _UxGT("Velocità")
|
|
#define MSG_BED_Z _UxGT("Piatto Z")
|
|
#define MSG_NOZZLE _UxGT("Ugello")
|
|
#define MSG_BED _UxGT("Piatto")
|
|
#define MSG_FAN_SPEED _UxGT("Velocità ventola")
|
|
#define MSG_EXTRA_FAN_SPEED _UxGT("Extra vel. ventola")
|
|
#define MSG_FLOW _UxGT("Flusso")
|
|
#define MSG_CONTROL _UxGT("Controllo")
|
|
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
|
|
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact")
|
|
#define MSG_AUTOTEMP _UxGT("Autotemp")
|
|
#define MSG_ON _UxGT("On ")
|
|
#define MSG_OFF _UxGT("Off")
|
|
#define MSG_PID_P _UxGT("PID-P")
|
|
#define MSG_PID_I _UxGT("PID-I")
|
|
#define MSG_PID_D _UxGT("PID-D")
|
|
#define MSG_PID_C _UxGT("PID-C")
|
|
#define MSG_SELECT _UxGT("Seleziona")
|
|
#define MSG_ACC _UxGT("Accel")
|
|
#define MSG_JERK _UxGT("Jerk")
|
|
#if IS_KINEMATIC
|
|
#define MSG_VA_JERK _UxGT("Va-jerk")
|
|
#define MSG_VB_JERK _UxGT("Vb-jerk")
|
|
#define MSG_VC_JERK _UxGT("Vc-jerk")
|
|
#else
|
|
#define MSG_VA_JERK _UxGT("Vx-jerk")
|
|
#define MSG_VB_JERK _UxGT("Vy-jerk")
|
|
#define MSG_VC_JERK _UxGT("Vz-jerk")
|
|
#endif
|
|
#define MSG_VE_JERK _UxGT("Ve-jerk")
|
|
#define MSG_JUNCTION_DEVIATION _UxGT("Deviaz. giunzioni")
|
|
#define MSG_VELOCITY _UxGT("Velocità")
|
|
#define MSG_VMAX _UxGT("Vmax ")
|
|
#define MSG_VMIN _UxGT("Vmin")
|
|
#define MSG_VTRAV_MIN _UxGT("VTrav min")
|
|
#define MSG_ACCELERATION _UxGT("Accelerazione")
|
|
#define MSG_AMAX _UxGT("Amax ")
|
|
#define MSG_A_RETRACT _UxGT("A-Ritrazione")
|
|
#define MSG_A_TRAVEL _UxGT("A-Spostamento")
|
|
#define MSG_STEPS_PER_MM _UxGT("Passi/mm")
|
|
#if IS_KINEMATIC
|
|
#define MSG_ASTEPS _UxGT("Apassi/mm")
|
|
#define MSG_BSTEPS _UxGT("Bpassi/mm")
|
|
#define MSG_CSTEPS _UxGT("Cpassi/mm")
|
|
#else
|
|
#define MSG_ASTEPS _UxGT("Xpassi/mm")
|
|
#define MSG_BSTEPS _UxGT("Ypassi/mm")
|
|
#define MSG_CSTEPS _UxGT("Zpassi/mm")
|
|
#endif
|
|
#define MSG_ESTEPS _UxGT("Epassi/mm")
|
|
#define MSG_E1STEPS _UxGT("E1passi/mm")
|
|
#define MSG_E2STEPS _UxGT("E2passi/mm")
|
|
#define MSG_E3STEPS _UxGT("E3passi/mm")
|
|
#define MSG_E4STEPS _UxGT("E4passi/mm")
|
|
#define MSG_E5STEPS _UxGT("E5passi/mm")
|
|
#define MSG_E6STEPS _UxGT("E6passi/mm")
|
|
#define MSG_TEMPERATURE _UxGT("Temperatura")
|
|
#define MSG_MOTION _UxGT("Movimento")
|
|
#define MSG_FILAMENT _UxGT("Filamento")
|
|
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
|
|
#define MSG_FILAMENT_DIAM _UxGT("Diam. filo")
|
|
#define MSG_FILAMENT_UNLOAD _UxGT("Rimuovi mm")
|
|
#define MSG_FILAMENT_LOAD _UxGT("Carica mm")
|
|
#define MSG_ADVANCE_K _UxGT("K Avanzamento")
|
|
#define MSG_CONTRAST _UxGT("Contrasto LCD")
|
|
#define MSG_STORE_EEPROM _UxGT("Salva impostazioni")
|
|
#define MSG_LOAD_EEPROM _UxGT("Carica impostazioni")
|
|
#define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.")
|
|
#define MSG_INIT_EEPROM _UxGT("Inizializza EEPROM")
|
|
#define MSG_SD_UPDATE _UxGT("Aggiorna SD")
|
|
#define MSG_RESET_PRINTER _UxGT("Resetta stampante")
|
|
#define MSG_REFRESH _UxGT("Aggiorna")
|
|
#define MSG_WATCH _UxGT("Schermata info")
|
|
#define MSG_PREPARE _UxGT("Prepara")
|
|
#define MSG_TUNE _UxGT("Regola")
|
|
#define MSG_PAUSE_PRINT _UxGT("Pausa stampa")
|
|
#define MSG_RESUME_PRINT _UxGT("Riprendi stampa")
|
|
#define MSG_STOP_PRINT _UxGT("Arresta stampa")
|
|
#define MSG_POWER_LOSS_RECOVERY _UxGT("Ripresa da PowerLoss")
|
|
#define MSG_CARD_MENU _UxGT("Stampa da SD")
|
|
#define MSG_NO_CARD _UxGT("SD non presente")
|
|
#define MSG_DWELL _UxGT("Sospensione...")
|
|
#define MSG_USERWAIT _UxGT("Premi tasto..")
|
|
#define MSG_PRINT_PAUSED _UxGT("Stampa sospesa")
|
|
#define MSG_PRINTING _UxGT("Stampa...")
|
|
#define MSG_PRINT_ABORTED _UxGT("Stampa annullata")
|
|
#define MSG_NO_MOVE _UxGT("Nessun Movimento")
|
|
#define MSG_KILLED _UxGT("UCCISO. ")
|
|
#define MSG_STOPPED _UxGT("ARRESTATO. ")
|
|
#define MSG_CONTROL_RETRACT _UxGT("Ritrai mm")
|
|
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Scamb. Ritrai mm")
|
|
#define MSG_CONTROL_RETRACTF _UxGT("Ritrai V")
|
|
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Salta mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
|
|
#define MSG_AUTORETRACT _UxGT("AutoRitrai")
|
|
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Dist. ritrazione")
|
|
#define MSG_TOOL_CHANGE _UxGT("Cambio utensile")
|
|
#define MSG_TOOL_CHANGE_ZLIFT _UxGT("Risalita Z")
|
|
#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Velocità innesco")
|
|
#define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Velocità retrazione")
|
|
#define MSG_FILAMENTCHANGE _UxGT("Cambia filamento")
|
|
#define MSG_FILAMENTLOAD _UxGT("Carica filamento")
|
|
#define MSG_FILAMENTUNLOAD _UxGT("Rimuovi filamento")
|
|
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Rimuovi tutto")
|
|
#define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card")
|
|
#define MSG_CHANGE_SDCARD _UxGT("Cambia SD-Card")
|
|
#define MSG_ZPROBE_OUT _UxGT("Z probe fuori piatto")
|
|
#define MSG_SKEW_FACTOR _UxGT("Fattore distorsione")
|
|
#define MSG_BLTOUCH _UxGT("BLTouch")
|
|
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
|
|
#define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch")
|
|
#define MSG_BLTOUCH_DEPLOY _UxGT("Estendi BLTouch")
|
|
#define MSG_BLTOUCH_STOW _UxGT("Ritrai BLTouch")
|
|
#define MSG_MANUAL_DEPLOY _UxGT("Estendi Sonda-Z")
|
|
#define MSG_MANUAL_STOW _UxGT("Ritrai Sonda-Z")
|
|
#define MSG_HOME _UxGT("Home") // Usato come MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#define MSG_FIRST _UxGT("prima")
|
|
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset sonda Z")
|
|
#define MSG_BABYSTEP_X _UxGT("Babystep X")
|
|
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
|
|
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
|
|
#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa annullati")
|
|
#define MSG_HEATING_FAILED_LCD _UxGT("Riscald. Fallito")
|
|
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Risc. piatto fallito")
|
|
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP RIDONDANTE")
|
|
#define MSG_THERMAL_RUNAWAY _UxGT("TEMP FUORI CONTROLLO")
|
|
#define MSG_THERMAL_RUNAWAY_BED _UxGT("TEMP PIAT.FUORI CTRL")
|
|
#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP MASSIMA")
|
|
#define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA")
|
|
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP MAX PIATTO")
|
|
#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP MIN PIATTO")
|
|
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
|
|
#define MSG_HALTED _UxGT("STAMPANTE FERMATA")
|
|
#define MSG_PLEASE_RESET _UxGT("Riavviare prego")
|
|
#define MSG_SHORT_DAY _UxGT("g") // Un solo carattere
|
|
#define MSG_SHORT_HOUR _UxGT("h") // Un solo carattere
|
|
#define MSG_SHORT_MINUTE _UxGT("m") // Un solo carattere
|
|
#define MSG_HEATING _UxGT("Riscaldamento...")
|
|
#define MSG_COOLING _UxGT("Raffreddamento..")
|
|
#define MSG_BED_HEATING _UxGT("Risc. piatto...")
|
|
#define MSG_BED_COOLING _UxGT("Raffr. piatto...")
|
|
#define MSG_DELTA_CALIBRATE _UxGT("Calibraz. Delta")
|
|
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibra X")
|
|
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y")
|
|
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z")
|
|
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra centro")
|
|
#define MSG_DELTA_SETTINGS _UxGT("Impostaz. Delta")
|
|
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione")
|
|
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta")
|
|
#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Offset sonda-Z")
|
|
#define MSG_DELTA_DIAG_ROD _UxGT("Barra Diagonale")
|
|
#define MSG_DELTA_HEIGHT _UxGT("Altezza")
|
|
#define MSG_DELTA_RADIUS _UxGT("Raggio")
|
|
#define MSG_INFO_MENU _UxGT("Riguardo stampante")
|
|
#define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante")
|
|
#define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti")
|
|
#define MSG_LINEAR_LEVELING _UxGT("Livel. Lineare")
|
|
#define MSG_BILINEAR_LEVELING _UxGT("Livel. Bilineare")
|
|
#define MSG_UBL_LEVELING _UxGT("Livel.piatto unific.")
|
|
#define MSG_MESH_LEVELING _UxGT("Livel. Mesh")
|
|
#define MSG_INFO_STATS_MENU _UxGT("Statistiche")
|
|
#define MSG_INFO_BOARD_MENU _UxGT("Info. scheda")
|
|
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori")
|
|
#define MSG_INFO_EXTRUDERS _UxGT("Estrusori")
|
|
#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
|
#define MSG_INFO_PROTOCOL _UxGT("Protocollo")
|
|
#define MSG_CASE_LIGHT _UxGT("Luci Case")
|
|
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosità Luci")
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Contat. stampa")
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati")
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Tempo totale")
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Lavoro più lungo")
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Totale estruso")
|
|
#else
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Stampe")
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati")
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Durata")
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Più lungo")
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Estruso")
|
|
#endif
|
|
#define MSG_INFO_MIN_TEMP _UxGT("Temp min")
|
|
#define MSG_INFO_MAX_TEMP _UxGT("Temp max")
|
|
#define MSG_INFO_PSU _UxGT("Alimentatore")
|
|
#define MSG_DRIVE_STRENGTH _UxGT("Potenza Drive")
|
|
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
|
#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM")
|
|
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA")
|
|
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CARICA FILAMENTO")
|
|
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("RIMUOVI FILAMENTO")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI RIPRESA:")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Spurga di più")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
|
|
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ")
|
|
#define MSG_RUNOUT_SENSOR_ENABLE _UxGT("Sens.filo terminato")
|
|
#define MSG_ERR_HOMING_FAILED _UxGT("Home fallito")
|
|
#define MSG_ERR_PROBING_FAILED _UxGT("Sondaggio fallito")
|
|
#define MSG_M600_TOO_COLD _UxGT("M600:Troppo freddo")
|
|
|
|
//
|
|
// Le schermate di Cambio Filamento possono visualizzare fino a 3 linee su un display a 4 righe
|
|
// ...o fino a 2 linee su un display a 3 righe.
|
|
#if LCD_HEIGHT >= 4
|
|
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Premi per")
|
|
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("riprendere")
|
|
#define MSG_ADVANCED_PAUSE_WAITING_3 _UxGT("la stampa")
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere avvio")
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del cambio")
|
|
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("di filamento")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci il")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e premi")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("per continuare")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Premi per")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("riscaldare ugello")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldam. ugello")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Attendere prego...")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attendere")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("l'espulsione")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("del filamento")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento")
|
|
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attendere")
|
|
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("lo spurgo")
|
|
#define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("del filamento")
|
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Premi x terminare")
|
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("lo spurgo")
|
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_3 _UxGT("del filamento")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa...")
|
|
#else // LCD_HEIGHT < 4
|
|
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Premi x continuare")
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Riscalda ugello")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...")
|
|
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Spurgo filamento")
|
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Premi x terminare")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...")
|
|
#endif // LCD_HEIGHT < 4
|