1101 lines
45 KiB
C++
1101 lines
45 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* gcode.cpp - Temporary container for all gcode handlers
|
|
* Most will migrate to classes, by feature.
|
|
*/
|
|
|
|
#include "gcode.h"
|
|
GcodeSuite gcode;
|
|
|
|
#if ENABLED(WIFI_CUSTOM_COMMAND)
|
|
extern bool wifi_custom_command(char * const command_ptr);
|
|
#endif
|
|
|
|
#include "parser.h"
|
|
#include "queue.h"
|
|
#include "../module/motion.h"
|
|
|
|
#if ENABLED(PRINTCOUNTER)
|
|
#include "../module/printcounter.h"
|
|
#endif
|
|
|
|
#if ENABLED(HOST_ACTION_COMMANDS)
|
|
#include "../feature/host_actions.h"
|
|
#endif
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
#include "../sd/cardreader.h"
|
|
#include "../feature/powerloss.h"
|
|
#endif
|
|
|
|
#if ENABLED(CANCEL_OBJECTS)
|
|
#include "../feature/cancel_object.h"
|
|
#endif
|
|
|
|
#if ENABLED(LASER_MOVE_POWER)
|
|
#include "../feature/spindle_laser.h"
|
|
#endif
|
|
|
|
#if ENABLED(FLOWMETER_SAFETY)
|
|
#include "../feature/cooler.h"
|
|
#endif
|
|
|
|
#if ENABLED(PASSWORD_FEATURE)
|
|
#include "../feature/password/password.h"
|
|
#endif
|
|
|
|
#include "../MarlinCore.h" // for idle, kill
|
|
|
|
// Inactivity shutdown
|
|
millis_t GcodeSuite::previous_move_ms = 0,
|
|
GcodeSuite::max_inactive_time = 0,
|
|
GcodeSuite::stepper_inactive_time = SEC_TO_MS(DEFAULT_STEPPER_DEACTIVE_TIME);
|
|
|
|
// Relative motion mode for each logical axis
|
|
static constexpr xyze_bool_t ar_init = AXIS_RELATIVE_MODES;
|
|
uint8_t GcodeSuite::axis_relative = (
|
|
(ar_init.x ? _BV(REL_X) : 0)
|
|
| (ar_init.y ? _BV(REL_Y) : 0)
|
|
| (ar_init.z ? _BV(REL_Z) : 0)
|
|
| (ar_init.e ? _BV(REL_E) : 0)
|
|
);
|
|
|
|
#if EITHER(HAS_AUTO_REPORTING, HOST_KEEPALIVE_FEATURE)
|
|
bool GcodeSuite::autoreport_paused; // = false
|
|
#endif
|
|
|
|
#if ENABLED(HOST_KEEPALIVE_FEATURE)
|
|
GcodeSuite::MarlinBusyState GcodeSuite::busy_state = NOT_BUSY;
|
|
uint8_t GcodeSuite::host_keepalive_interval = DEFAULT_KEEPALIVE_INTERVAL;
|
|
#endif
|
|
|
|
#if ENABLED(CNC_WORKSPACE_PLANES)
|
|
GcodeSuite::WorkspacePlane GcodeSuite::workspace_plane = PLANE_XY;
|
|
#endif
|
|
|
|
#if ENABLED(CNC_COORDINATE_SYSTEMS)
|
|
int8_t GcodeSuite::active_coordinate_system = -1; // machine space
|
|
xyz_pos_t GcodeSuite::coordinate_system[MAX_COORDINATE_SYSTEMS];
|
|
#endif
|
|
|
|
/**
|
|
* Get the target extruder from the T parameter or the active_extruder
|
|
* Return -1 if the T parameter is out of range
|
|
*/
|
|
int8_t GcodeSuite::get_target_extruder_from_command() {
|
|
if (parser.seenval('T')) {
|
|
const int8_t e = parser.value_byte();
|
|
if (e < EXTRUDERS) return e;
|
|
SERIAL_ECHO_START();
|
|
SERIAL_CHAR('M'); SERIAL_ECHO(parser.codenum);
|
|
SERIAL_ECHOLNPAIR(" " STR_INVALID_EXTRUDER " ", e);
|
|
return -1;
|
|
}
|
|
return active_extruder;
|
|
}
|
|
|
|
/**
|
|
* Get the target e stepper from the T parameter
|
|
* Return -1 if the T parameter is out of range or unspecified
|
|
*/
|
|
int8_t GcodeSuite::get_target_e_stepper_from_command() {
|
|
const int8_t e = parser.intval('T', -1);
|
|
if (WITHIN(e, 0, E_STEPPERS - 1)) return e;
|
|
|
|
SERIAL_ECHO_START();
|
|
SERIAL_CHAR('M'); SERIAL_ECHO(parser.codenum);
|
|
if (e == -1)
|
|
SERIAL_ECHOLNPGM(" " STR_E_STEPPER_NOT_SPECIFIED);
|
|
else
|
|
SERIAL_ECHOLNPAIR(" " STR_INVALID_E_STEPPER " ", e);
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* Set XYZE destination and feedrate from the current GCode command
|
|
*
|
|
* - Set destination from included axis codes
|
|
* - Set to current for missing axis codes
|
|
* - Set the feedrate, if included
|
|
*/
|
|
void GcodeSuite::get_destination_from_command() {
|
|
xyze_bool_t seen = { false, false, false, false };
|
|
|
|
#if ENABLED(CANCEL_OBJECTS)
|
|
const bool &skip_move = cancelable.skipping;
|
|
#else
|
|
constexpr bool skip_move = false;
|
|
#endif
|
|
|
|
// Get new XYZ position, whether absolute or relative
|
|
LOOP_XYZ(i) {
|
|
if ( (seen[i] = parser.seenval(XYZ_CHAR(i))) ) {
|
|
const float v = parser.value_axis_units((AxisEnum)i);
|
|
if (skip_move)
|
|
destination[i] = current_position[i];
|
|
else
|
|
destination[i] = axis_is_relative(AxisEnum(i)) ? current_position[i] + v : LOGICAL_TO_NATIVE(v, i);
|
|
}
|
|
else
|
|
destination[i] = current_position[i];
|
|
}
|
|
|
|
// Get new E position, whether absolute or relative
|
|
if ( (seen.e = parser.seenval('E')) ) {
|
|
const float v = parser.value_axis_units(E_AXIS);
|
|
destination.e = axis_is_relative(E_AXIS) ? current_position.e + v : v;
|
|
}
|
|
else
|
|
destination.e = current_position.e;
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY) && !PIN_EXISTS(POWER_LOSS)
|
|
// Only update power loss recovery on moves with E
|
|
if (recovery.enabled && IS_SD_PRINTING() && seen.e && (seen.x || seen.y))
|
|
recovery.save();
|
|
#endif
|
|
|
|
if (parser.linearval('F') > 0)
|
|
feedrate_mm_s = parser.value_feedrate();
|
|
|
|
#if ENABLED(PRINTCOUNTER)
|
|
if (!DEBUGGING(DRYRUN) && !skip_move)
|
|
print_job_timer.incFilamentUsed(destination.e - current_position.e);
|
|
#endif
|
|
|
|
// Get ABCDHI mixing factors
|
|
#if BOTH(MIXING_EXTRUDER, DIRECT_MIXING_IN_G1)
|
|
M165();
|
|
#endif
|
|
|
|
#if ENABLED(LASER_MOVE_POWER)
|
|
// Set the laser power in the planner to configure this move
|
|
if (parser.seen('S')) {
|
|
const float spwr = parser.value_float();
|
|
cutter.inline_power(TERN(SPINDLE_LASER_PWM, cutter.power_to_range(cutter_power_t(round(spwr))), spwr > 0 ? 255 : 0));
|
|
}
|
|
else if (ENABLED(LASER_MOVE_G0_OFF) && parser.codenum == 0) // G0
|
|
cutter.set_inline_enabled(false);
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* Dwell waits immediately. It does not synchronize. Use M400 instead of G4
|
|
*/
|
|
void GcodeSuite::dwell(millis_t time) {
|
|
time += millis();
|
|
while (PENDING(millis(), time)) idle();
|
|
}
|
|
|
|
/**
|
|
* When G29_RETRY_AND_RECOVER is enabled, call G29() in
|
|
* a loop with recovery and retry handling.
|
|
*/
|
|
#if BOTH(HAS_LEVELING, G29_RETRY_AND_RECOVER)
|
|
|
|
void GcodeSuite::event_probe_recover() {
|
|
TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_INFO, PSTR("G29 Retrying"), DISMISS_STR));
|
|
#ifdef ACTION_ON_G29_RECOVER
|
|
host_action(PSTR(ACTION_ON_G29_RECOVER));
|
|
#endif
|
|
#ifdef G29_RECOVER_COMMANDS
|
|
process_subcommands_now_P(PSTR(G29_RECOVER_COMMANDS));
|
|
#endif
|
|
}
|
|
|
|
void GcodeSuite::event_probe_failure() {
|
|
#ifdef ACTION_ON_G29_FAILURE
|
|
host_action(PSTR(ACTION_ON_G29_FAILURE));
|
|
#endif
|
|
#ifdef G29_FAILURE_COMMANDS
|
|
process_subcommands_now_P(PSTR(G29_FAILURE_COMMANDS));
|
|
#endif
|
|
#if ENABLED(G29_HALT_ON_FAILURE)
|
|
#ifdef ACTION_ON_CANCEL
|
|
host_action_cancel();
|
|
#endif
|
|
kill(GET_TEXT(MSG_LCD_PROBING_FAILED));
|
|
#endif
|
|
}
|
|
|
|
#ifndef G29_MAX_RETRIES
|
|
#define G29_MAX_RETRIES 0
|
|
#endif
|
|
|
|
void GcodeSuite::G29_with_retry() {
|
|
uint8_t retries = G29_MAX_RETRIES;
|
|
while (G29()) { // G29 should return true for failed probes ONLY
|
|
if (retries) {
|
|
event_probe_recover();
|
|
--retries;
|
|
}
|
|
else {
|
|
event_probe_failure();
|
|
return;
|
|
}
|
|
}
|
|
|
|
TERN_(HOST_PROMPT_SUPPORT, host_action_prompt_end());
|
|
|
|
#ifdef G29_SUCCESS_COMMANDS
|
|
process_subcommands_now_P(PSTR(G29_SUCCESS_COMMANDS));
|
|
#endif
|
|
}
|
|
|
|
#endif // HAS_LEVELING && G29_RETRY_AND_RECOVER
|
|
|
|
/**
|
|
* Process the parsed command and dispatch it to its handler
|
|
*/
|
|
void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
|
|
KEEPALIVE_STATE(IN_HANDLER);
|
|
|
|
/**
|
|
* Block all Gcodes except M511 Unlock Printer, if printer is locked
|
|
* Will still block Gcodes if M511 is disabled, in which case the printer should be unlocked via LCD Menu
|
|
*/
|
|
#if ENABLED(PASSWORD_FEATURE)
|
|
if (password.is_locked && !parser.is_command('M', 511)) {
|
|
SERIAL_ECHO_MSG(STR_PRINTER_LOCKED);
|
|
if (!no_ok) queue.ok_to_send();
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#if ENABLED(FLOWMETER_SAFETY)
|
|
if (cooler.fault) {
|
|
SERIAL_ECHO_MSG(STR_FLOWMETER_FAULT);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
// Handle a known G, M, or T
|
|
switch (parser.command_letter) {
|
|
case 'G': switch (parser.codenum) {
|
|
|
|
case 0: case 1: // G0: Fast Move, G1: Linear Move
|
|
G0_G1(TERN_(HAS_FAST_MOVES, parser.codenum == 0)); break;
|
|
|
|
#if ENABLED(ARC_SUPPORT) && DISABLED(SCARA)
|
|
case 2: case 3: G2_G3(parser.codenum == 2); break; // G2: CW ARC, G3: CCW ARC
|
|
#endif
|
|
|
|
case 4: G4(); break; // G4: Dwell
|
|
|
|
#if ENABLED(BEZIER_CURVE_SUPPORT)
|
|
case 5: G5(); break; // G5: Cubic B_spline
|
|
#endif
|
|
|
|
#if ENABLED(DIRECT_STEPPING)
|
|
case 6: G6(); break; // G6: Direct Stepper Move
|
|
#endif
|
|
|
|
#if ENABLED(FWRETRACT)
|
|
case 10: G10(); break; // G10: Retract / Swap Retract
|
|
case 11: G11(); break; // G11: Recover / Swap Recover
|
|
#endif
|
|
|
|
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
|
case 12: G12(); break; // G12: Nozzle Clean
|
|
#endif
|
|
|
|
#if ENABLED(CNC_WORKSPACE_PLANES)
|
|
case 17: G17(); break; // G17: Select Plane XY
|
|
case 18: G18(); break; // G18: Select Plane ZX
|
|
case 19: G19(); break; // G19: Select Plane YZ
|
|
#endif
|
|
|
|
#if ENABLED(INCH_MODE_SUPPORT)
|
|
case 20: G20(); break; // G20: Inch Mode
|
|
case 21: G21(); break; // G21: MM Mode
|
|
#else
|
|
case 21: NOOP; break; // No error on unknown G21
|
|
#endif
|
|
|
|
#if ENABLED(G26_MESH_VALIDATION)
|
|
case 26: G26(); break; // G26: Mesh Validation Pattern generation
|
|
#endif
|
|
|
|
#if ENABLED(NOZZLE_PARK_FEATURE)
|
|
case 27: G27(); break; // G27: Nozzle Park
|
|
#endif
|
|
|
|
case 28: G28(); break; // G28: Home one or more axes
|
|
|
|
#if HAS_LEVELING
|
|
case 29: // G29: Bed leveling calibration
|
|
TERN(G29_RETRY_AND_RECOVER, G29_with_retry, G29)();
|
|
break;
|
|
#endif
|
|
|
|
#if HAS_BED_PROBE
|
|
case 30: G30(); break; // G30: Single Z probe
|
|
#if ENABLED(Z_PROBE_SLED)
|
|
case 31: G31(); break; // G31: dock the sled
|
|
case 32: G32(); break; // G32: undock the sled
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(DELTA_AUTO_CALIBRATION)
|
|
case 33: G33(); break; // G33: Delta Auto-Calibration
|
|
#endif
|
|
|
|
#if ANY(Z_MULTI_ENDSTOPS, Z_STEPPER_AUTO_ALIGN, MECHANICAL_GANTRY_CALIBRATION)
|
|
case 34: G34(); break; // G34: Z Stepper automatic alignment using probe
|
|
#endif
|
|
|
|
#if ENABLED(ASSISTED_TRAMMING)
|
|
case 35: G35(); break; // G35: Read four bed corners to help adjust bed screws
|
|
#endif
|
|
|
|
#if ENABLED(G38_PROBE_TARGET)
|
|
case 38: // G38.2, G38.3: Probe towards target
|
|
if (WITHIN(parser.subcode, 2, TERN(G38_PROBE_AWAY, 5, 3)))
|
|
G38(parser.subcode); // G38.4, G38.5: Probe away from target
|
|
break;
|
|
#endif
|
|
|
|
#if HAS_MESH
|
|
case 42: G42(); break; // G42: Coordinated move to a mesh point
|
|
#endif
|
|
|
|
#if ENABLED(CNC_COORDINATE_SYSTEMS)
|
|
case 53: G53(); break; // G53: (prefix) Apply native workspace
|
|
case 54: G54(); break; // G54: Switch to Workspace 1
|
|
case 55: G55(); break; // G55: Switch to Workspace 2
|
|
case 56: G56(); break; // G56: Switch to Workspace 3
|
|
case 57: G57(); break; // G57: Switch to Workspace 4
|
|
case 58: G58(); break; // G58: Switch to Workspace 5
|
|
case 59: G59(); break; // G59.0 - G59.3: Switch to Workspace 6-9
|
|
#endif
|
|
|
|
#if SAVED_POSITIONS
|
|
case 60: G60(); break; // G60: save current position
|
|
case 61: G61(); break; // G61: Apply/restore saved coordinates.
|
|
#endif
|
|
|
|
#if ENABLED(PROBE_TEMP_COMPENSATION)
|
|
case 76: G76(); break; // G76: Calibrate first layer compensation values
|
|
#endif
|
|
|
|
#if ENABLED(GCODE_MOTION_MODES)
|
|
case 80: G80(); break; // G80: Reset the current motion mode
|
|
#endif
|
|
|
|
case 90: set_relative_mode(false); break; // G90: Absolute Mode
|
|
case 91: set_relative_mode(true); break; // G91: Relative Mode
|
|
|
|
case 92: G92(); break; // G92: Set current axis position(s)
|
|
|
|
#if ENABLED(CALIBRATION_GCODE)
|
|
case 425: G425(); break; // G425: Perform calibration with calibration cube
|
|
#endif
|
|
|
|
#if ENABLED(DEBUG_GCODE_PARSER)
|
|
case 800: parser.debug(); break; // G800: GCode Parser Test for G
|
|
#endif
|
|
|
|
default: parser.unknown_command_warning(); break;
|
|
}
|
|
break;
|
|
|
|
case 'M': switch (parser.codenum) {
|
|
|
|
#if HAS_RESUME_CONTINUE
|
|
case 0: // M0: Unconditional stop - Wait for user button press on LCD
|
|
case 1: M0_M1(); break; // M1: Conditional stop - Wait for user button press on LCD
|
|
#endif
|
|
|
|
#if HAS_CUTTER
|
|
case 3: M3_M4(false); break; // M3: Turn ON Laser | Spindle (clockwise), set Power | Speed
|
|
case 4: M3_M4(true ); break; // M4: Turn ON Laser | Spindle (counter-clockwise), set Power | Speed
|
|
case 5: M5(); break; // M5: Turn OFF Laser | Spindle
|
|
#endif
|
|
|
|
#if ENABLED(COOLANT_CONTROL)
|
|
#if ENABLED(COOLANT_MIST)
|
|
case 7: M7(); break; // M7: Mist coolant ON
|
|
#endif
|
|
#if ENABLED(COOLANT_FLOOD)
|
|
case 8: M8(); break; // M8: Flood coolant ON
|
|
#endif
|
|
case 9: M9(); break; // M9: Coolant OFF
|
|
#endif
|
|
|
|
#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
|
|
case 12: M12(); break; // M12: Synchronize and optionally force a CLC set
|
|
#endif
|
|
|
|
#if ENABLED(EXPECTED_PRINTER_CHECK)
|
|
case 16: M16(); break; // M16: Expected printer check
|
|
#endif
|
|
|
|
case 17: M17(); break; // M17: Enable all stepper motors
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
case 20: M20(); break; // M20: List SD card
|
|
case 21: M21(); break; // M21: Init SD card
|
|
case 22: M22(); break; // M22: Release SD card
|
|
case 23: M23(); break; // M23: Select file
|
|
case 24: M24(); break; // M24: Start SD print
|
|
case 25: M25(); break; // M25: Pause SD print
|
|
case 26: M26(); break; // M26: Set SD index
|
|
case 27: M27(); break; // M27: Get SD status
|
|
case 28: M28(); break; // M28: Start SD write
|
|
case 29: M29(); break; // M29: Stop SD write
|
|
case 30: M30(); break; // M30 <filename> Delete File
|
|
|
|
#if HAS_MEDIA_SUBCALLS
|
|
case 32: M32(); break; // M32: Select file and start SD print
|
|
#endif
|
|
|
|
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
|
|
case 33: M33(); break; // M33: Get the long full path to a file or folder
|
|
#endif
|
|
|
|
#if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
|
|
case 34: M34(); break; // M34: Set SD card sorting options
|
|
#endif
|
|
|
|
case 928: M928(); break; // M928: Start SD write
|
|
#endif // SDSUPPORT
|
|
|
|
case 31: M31(); break; // M31: Report time since the start of SD print or last M109
|
|
|
|
#if ENABLED(DIRECT_PIN_CONTROL)
|
|
case 42: M42(); break; // M42: Change pin state
|
|
#endif
|
|
|
|
#if ENABLED(PINS_DEBUGGING)
|
|
case 43: M43(); break; // M43: Read pin state
|
|
#endif
|
|
|
|
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
|
|
case 48: M48(); break; // M48: Z probe repeatability test
|
|
#endif
|
|
|
|
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
|
|
case 73: M73(); break; // M73: Set progress percentage (for display on LCD)
|
|
#endif
|
|
|
|
case 75: M75(); break; // M75: Start print timer
|
|
case 76: M76(); break; // M76: Pause print timer
|
|
case 77: M77(); break; // M77: Stop print timer
|
|
|
|
#if ENABLED(PRINTCOUNTER)
|
|
case 78: M78(); break; // M78: Show print statistics
|
|
#endif
|
|
|
|
#if ENABLED(M100_FREE_MEMORY_WATCHER)
|
|
case 100: M100(); break; // M100: Free Memory Report
|
|
#endif
|
|
|
|
#if EXTRUDERS
|
|
case 104: M104(); break; // M104: Set hot end temperature
|
|
case 109: M109(); break; // M109: Wait for hotend temperature to reach target
|
|
#endif
|
|
|
|
case 105: M105(); return; // M105: Report Temperatures (and say "ok")
|
|
|
|
#if HAS_FAN
|
|
case 106: M106(); break; // M106: Fan On
|
|
case 107: M107(); break; // M107: Fan Off
|
|
#endif
|
|
|
|
case 110: M110(); break; // M110: Set Current Line Number
|
|
case 111: M111(); break; // M111: Set debug level
|
|
|
|
#if DISABLED(EMERGENCY_PARSER)
|
|
case 108: M108(); break; // M108: Cancel Waiting
|
|
case 112: M112(); break; // M112: Full Shutdown
|
|
case 410: M410(); break; // M410: Quickstop - Abort all the planned moves.
|
|
TERN_(HOST_PROMPT_SUPPORT, case 876:) // M876: Handle Host prompt responses
|
|
#else
|
|
case 108: case 112: case 410:
|
|
TERN_(HOST_PROMPT_SUPPORT, case 876:)
|
|
break;
|
|
#endif
|
|
|
|
#if ENABLED(HOST_KEEPALIVE_FEATURE)
|
|
case 113: M113(); break; // M113: Set Host Keepalive interval
|
|
#endif
|
|
|
|
#if HAS_HEATED_BED
|
|
case 140: M140(); break; // M140: Set bed temperature
|
|
case 190: M190(); break; // M190: Wait for bed temperature to reach target
|
|
#endif
|
|
|
|
#if HAS_HEATED_CHAMBER
|
|
case 141: M141(); break; // M141: Set chamber temperature
|
|
case 191: M191(); break; // M191: Wait for chamber temperature to reach target
|
|
#endif
|
|
|
|
#if HAS_COOLER
|
|
case 143: M143(); break; // M143: Set cooler temperature
|
|
case 193: M193(); break; // M193: Wait for cooler temperature to reach target
|
|
#endif
|
|
|
|
#if BOTH(AUTO_REPORT_TEMPERATURES, HAS_TEMP_SENSOR)
|
|
case 155: M155(); break; // M155: Set temperature auto-report interval
|
|
#endif
|
|
|
|
#if ENABLED(PARK_HEAD_ON_PAUSE)
|
|
case 125: M125(); break; // M125: Store current position and move to filament change position
|
|
#endif
|
|
|
|
#if ENABLED(BARICUDA)
|
|
// PWM for HEATER_1_PIN
|
|
#if HAS_HEATER_1
|
|
case 126: M126(); break; // M126: valve open
|
|
case 127: M127(); break; // M127: valve closed
|
|
#endif
|
|
|
|
// PWM for HEATER_2_PIN
|
|
#if HAS_HEATER_2
|
|
case 128: M128(); break; // M128: valve open
|
|
case 129: M129(); break; // M129: valve closed
|
|
#endif
|
|
#endif // BARICUDA
|
|
|
|
#if ENABLED(PSU_CONTROL)
|
|
case 80: M80(); break; // M80: Turn on Power Supply
|
|
#endif
|
|
case 81: M81(); break; // M81: Turn off Power, including Power Supply, if possible
|
|
|
|
case 82: M82(); break; // M82: Set E axis normal mode (same as other axes)
|
|
case 83: M83(); break; // M83: Set E axis relative mode
|
|
case 18: case 84: M18_M84(); break; // M18/M84: Disable Steppers / Set Timeout
|
|
case 85: M85(); break; // M85: Set inactivity stepper shutdown timeout
|
|
case 92: M92(); break; // M92: Set the steps-per-unit for one or more axes
|
|
case 114: M114(); break; // M114: Report current position
|
|
case 115: M115(); break; // M115: Report capabilities
|
|
case 117: M117(); break; // M117: Set LCD message text, if possible
|
|
case 118: M118(); break; // M118: Display a message in the host console
|
|
case 119: M119(); break; // M119: Report endstop states
|
|
case 120: M120(); break; // M120: Enable endstops
|
|
case 121: M121(); break; // M121: Disable endstops
|
|
|
|
#if PREHEAT_COUNT
|
|
case 145: M145(); break; // M145: Set material heatup parameters
|
|
#endif
|
|
|
|
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
|
|
case 149: M149(); break; // M149: Set temperature units
|
|
#endif
|
|
|
|
#if HAS_COLOR_LEDS
|
|
case 150: M150(); break; // M150: Set Status LED Color
|
|
#endif
|
|
|
|
#if ENABLED(MIXING_EXTRUDER)
|
|
case 163: M163(); break; // M163: Set a component weight for mixing extruder
|
|
case 164: M164(); break; // M164: Save current mix as a virtual extruder
|
|
#if ENABLED(DIRECT_MIXING_IN_G1)
|
|
case 165: M165(); break; // M165: Set multiple mix weights
|
|
#endif
|
|
#if ENABLED(GRADIENT_MIX)
|
|
case 166: M166(); break; // M166: Set Gradient Mix
|
|
#endif
|
|
#endif
|
|
|
|
#if DISABLED(NO_VOLUMETRICS)
|
|
case 200: M200(); break; // M200: Set filament diameter, E to cubic units
|
|
#endif
|
|
|
|
case 201: M201(); break; // M201: Set max acceleration for print moves (units/s^2)
|
|
|
|
#if 0
|
|
case 202: M202(); break; // M202: Not used for Sprinter/grbl gen6
|
|
#endif
|
|
|
|
case 203: M203(); break; // M203: Set max feedrate (units/sec)
|
|
case 204: M204(); break; // M204: Set acceleration
|
|
case 205: M205(); break; // M205: Set advanced settings
|
|
|
|
#if HAS_M206_COMMAND
|
|
case 206: M206(); break; // M206: Set home offsets
|
|
#endif
|
|
|
|
#if ENABLED(FWRETRACT)
|
|
case 207: M207(); break; // M207: Set Retract Length, Feedrate, and Z lift
|
|
case 208: M208(); break; // M208: Set Recover (unretract) Additional Length and Feedrate
|
|
#if ENABLED(FWRETRACT_AUTORETRACT)
|
|
case 209:
|
|
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) M209(); // M209: Turn Automatic Retract Detection on/off
|
|
break;
|
|
#endif
|
|
#endif
|
|
|
|
#if HAS_SOFTWARE_ENDSTOPS
|
|
case 211: M211(); break; // M211: Enable, Disable, and/or Report software endstops
|
|
#endif
|
|
|
|
#if HAS_MULTI_EXTRUDER
|
|
case 217: M217(); break; // M217: Set filament swap parameters
|
|
#endif
|
|
|
|
#if HAS_HOTEND_OFFSET
|
|
case 218: M218(); break; // M218: Set a tool offset
|
|
#endif
|
|
|
|
case 220: M220(); break; // M220: Set Feedrate Percentage: S<percent> ("FR" on your LCD)
|
|
|
|
#if EXTRUDERS
|
|
case 221: M221(); break; // M221: Set Flow Percentage
|
|
#endif
|
|
|
|
#if ENABLED(DIRECT_PIN_CONTROL)
|
|
case 226: M226(); break; // M226: Wait until a pin reaches a state
|
|
#endif
|
|
|
|
#if HAS_SERVOS
|
|
case 280: M280(); break; // M280: Set servo position absolute
|
|
#if ENABLED(EDITABLE_SERVO_ANGLES)
|
|
case 281: M281(); break; // M281: Set servo angles
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(BABYSTEPPING)
|
|
case 290: M290(); break; // M290: Babystepping
|
|
#endif
|
|
|
|
#if HAS_BUZZER
|
|
case 300: M300(); break; // M300: Play beep tone
|
|
#endif
|
|
|
|
#if ENABLED(PIDTEMP)
|
|
case 301: M301(); break; // M301: Set hotend PID parameters
|
|
#endif
|
|
|
|
#if ENABLED(PIDTEMPBED)
|
|
case 304: M304(); break; // M304: Set bed PID parameters
|
|
#endif
|
|
|
|
#if ENABLED(PIDTEMPCHAMBER)
|
|
case 309: M309(); break; // M309: Set chamber PID parameters
|
|
#endif
|
|
|
|
#if ENABLED(PHOTO_GCODE)
|
|
case 240: M240(); break; // M240: Trigger a camera
|
|
#endif
|
|
|
|
#if HAS_LCD_CONTRAST
|
|
case 250: M250(); break; // M250: Set LCD contrast
|
|
#endif
|
|
|
|
#if ENABLED(EXPERIMENTAL_I2CBUS)
|
|
case 260: M260(); break; // M260: Send data to an i2c slave
|
|
case 261: M261(); break; // M261: Request data from an i2c slave
|
|
#endif
|
|
|
|
#if ENABLED(PREVENT_COLD_EXTRUSION)
|
|
case 302: M302(); break; // M302: Allow cold extrudes (set the minimum extrude temperature)
|
|
#endif
|
|
|
|
#if HAS_PID_HEATING
|
|
case 303: M303(); break; // M303: PID autotune
|
|
#endif
|
|
|
|
#if HAS_USER_THERMISTORS
|
|
case 305: M305(); break; // M305: Set user thermistor parameters
|
|
#endif
|
|
|
|
#if ENABLED(REPETIER_GCODE_M360)
|
|
case 360: M360(); break; // M360: Firmware settings
|
|
#endif
|
|
|
|
#if ENABLED(MORGAN_SCARA)
|
|
case 360: if (M360()) return; break; // M360: SCARA Theta pos1
|
|
case 361: if (M361()) return; break; // M361: SCARA Theta pos2
|
|
case 362: if (M362()) return; break; // M362: SCARA Psi pos1
|
|
case 363: if (M363()) return; break; // M363: SCARA Psi pos2
|
|
case 364: if (M364()) return; break; // M364: SCARA Psi pos3 (90 deg to Theta)
|
|
#endif
|
|
|
|
#if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
|
|
case 380: M380(); break; // M380: Activate solenoid on active (or specified) extruder
|
|
case 381: M381(); break; // M381: Disable all solenoids or, if MANUAL_SOLENOID_CONTROL, active (or specified) solenoid
|
|
#endif
|
|
|
|
case 400: M400(); break; // M400: Finish all moves
|
|
|
|
#if HAS_BED_PROBE
|
|
case 401: M401(); break; // M401: Deploy probe
|
|
case 402: M402(); break; // M402: Stow probe
|
|
#endif
|
|
|
|
#if HAS_PRUSA_MMU2
|
|
case 403: M403(); break;
|
|
#endif
|
|
|
|
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
|
case 404: M404(); break; // M404: Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or display nominal filament width
|
|
case 405: M405(); break; // M405: Turn on filament sensor for control
|
|
case 406: M406(); break; // M406: Turn off filament sensor for control
|
|
case 407: M407(); break; // M407: Display measured filament diameter
|
|
#endif
|
|
|
|
#if HAS_FILAMENT_SENSOR
|
|
case 412: M412(); break; // M412: Enable/Disable filament runout detection
|
|
#endif
|
|
|
|
#if HAS_MULTI_LANGUAGE
|
|
case 414: M414(); break; // M414: Select multi language menu
|
|
#endif
|
|
|
|
#if HAS_LEVELING
|
|
case 420: M420(); break; // M420: Enable/Disable Bed Leveling
|
|
#endif
|
|
|
|
#if HAS_MESH
|
|
case 421: M421(); break; // M421: Set a Mesh Bed Leveling Z coordinate
|
|
#endif
|
|
|
|
#if ENABLED(BACKLASH_GCODE)
|
|
case 425: M425(); break; // M425: Tune backlash compensation
|
|
#endif
|
|
|
|
#if HAS_M206_COMMAND
|
|
case 428: M428(); break; // M428: Apply current_position to home_offset
|
|
#endif
|
|
|
|
#if HAS_POWER_MONITOR
|
|
case 430: M430(); break; // M430: Read the system current (A), voltage (V), and power (W)
|
|
#endif
|
|
|
|
#if ENABLED(CANCEL_OBJECTS)
|
|
case 486: M486(); break; // M486: Identify and cancel objects
|
|
#endif
|
|
|
|
case 500: M500(); break; // M500: Store settings in EEPROM
|
|
case 501: M501(); break; // M501: Read settings from EEPROM
|
|
case 502: M502(); break; // M502: Revert to default settings
|
|
#if DISABLED(DISABLE_M503)
|
|
case 503: M503(); break; // M503: print settings currently in memory
|
|
#endif
|
|
#if ENABLED(EEPROM_SETTINGS)
|
|
case 504: M504(); break; // M504: Validate EEPROM contents
|
|
#endif
|
|
|
|
#if ENABLED(PASSWORD_FEATURE)
|
|
case 510: M510(); break; // M510: Lock Printer
|
|
#if ENABLED(PASSWORD_UNLOCK_GCODE)
|
|
case 511: M511(); break; // M511: Unlock Printer
|
|
#endif
|
|
#if ENABLED(PASSWORD_CHANGE_GCODE)
|
|
case 512: M512(); break; // M512: Set/Change/Remove Password
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
case 524: M524(); break; // M524: Abort the current SD print job
|
|
#endif
|
|
|
|
#if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
|
|
case 540: M540(); break; // M540: Set abort on endstop hit for SD printing
|
|
#endif
|
|
|
|
#if HAS_ETHERNET
|
|
case 552: M552(); break; // M552: Set IP address
|
|
case 553: M553(); break; // M553: Set gateway
|
|
case 554: M554(); break; // M554: Set netmask
|
|
#endif
|
|
|
|
#if ENABLED(BAUD_RATE_GCODE)
|
|
case 575: M575(); break; // M575: Set serial baudrate
|
|
#endif
|
|
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
case 600: M600(); break; // M600: Pause for Filament Change
|
|
case 603: M603(); break; // M603: Configure Filament Change
|
|
#endif
|
|
|
|
#if HAS_DUPLICATION_MODE
|
|
case 605: M605(); break; // M605: Set Dual X Carriage movement mode
|
|
#endif
|
|
|
|
#if ENABLED(DELTA)
|
|
case 665: M665(); break; // M665: Set delta configurations
|
|
#endif
|
|
|
|
#if ENABLED(DELTA) || HAS_EXTRA_ENDSTOPS
|
|
case 666: M666(); break; // M666: Set delta or multiple endstop adjustment
|
|
#endif
|
|
|
|
#if ENABLED(DUET_SMART_EFFECTOR) && PIN_EXISTS(SMART_EFFECTOR_MOD)
|
|
case 672: M672(); break; // M672: Set/clear Duet Smart Effector sensitivity
|
|
#endif
|
|
|
|
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
|
|
case 701: M701(); break; // M701: Load Filament
|
|
case 702: M702(); break; // M702: Unload Filament
|
|
#endif
|
|
|
|
#if ENABLED(CONTROLLER_FAN_EDITABLE)
|
|
case 710: M710(); break; // M710: Set Controller Fan settings
|
|
#endif
|
|
|
|
#if ENABLED(GCODE_MACROS)
|
|
case 810: case 811: case 812: case 813: case 814:
|
|
case 815: case 816: case 817: case 818: case 819:
|
|
M810_819(); break; // M810-M819: Define/execute G-code macro
|
|
#endif
|
|
|
|
#if HAS_BED_PROBE
|
|
case 851: M851(); break; // M851: Set Z Probe Z Offset
|
|
#endif
|
|
|
|
#if ENABLED(SKEW_CORRECTION_GCODE)
|
|
case 852: M852(); break; // M852: Set Skew factors
|
|
#endif
|
|
|
|
#if ENABLED(PROBE_TEMP_COMPENSATION)
|
|
case 192: M192(); break; // M192: Wait for probe temp
|
|
case 871: M871(); break; // M871: Print/reset/clear first layer temperature offset values
|
|
#endif
|
|
|
|
#if ENABLED(LIN_ADVANCE)
|
|
case 900: M900(); break; // M900: Set advance K factor.
|
|
#endif
|
|
|
|
#if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
|
|
case 907: M907(); break; // M907: Set digital trimpot motor current using axis codes.
|
|
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
|
|
case 908: M908(); break; // M908: Control digital trimpot directly.
|
|
#if ENABLED(HAS_MOTOR_CURRENT_DAC)
|
|
case 909: M909(); break; // M909: Print digipot/DAC current value
|
|
case 910: M910(); break; // M910: Commit digipot/DAC value to external EEPROM
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
#if HAS_TRINAMIC_CONFIG
|
|
case 122: M122(); break; // M122: Report driver configuration and status
|
|
case 906: M906(); break; // M906: Set motor current in milliamps using axis codes X, Y, Z, E
|
|
#if HAS_STEALTHCHOP
|
|
case 569: M569(); break; // M569: Enable stealthChop on an axis.
|
|
#endif
|
|
#if ENABLED(MONITOR_DRIVER_STATUS)
|
|
case 911: M911(); break; // M911: Report TMC2130 prewarn triggered flags
|
|
case 912: M912(); break; // M912: Clear TMC2130 prewarn triggered flags
|
|
#endif
|
|
#if ENABLED(HYBRID_THRESHOLD)
|
|
case 913: M913(); break; // M913: Set HYBRID_THRESHOLD speed.
|
|
#endif
|
|
#if USE_SENSORLESS
|
|
case 914: M914(); break; // M914: Set StallGuard sensitivity.
|
|
#endif
|
|
#endif
|
|
|
|
#if HAS_L64XX
|
|
case 122: M122(); break; // M122: Report status
|
|
case 906: M906(); break; // M906: Set or get motor drive level
|
|
case 916: M916(); break; // M916: L6470 tuning: Increase drive level until thermal warning
|
|
case 917: M917(); break; // M917: L6470 tuning: Find minimum current thresholds
|
|
case 918: M918(); break; // M918: L6470 tuning: Increase speed until max or error
|
|
#endif
|
|
|
|
#if HAS_MICROSTEPS
|
|
case 350: M350(); break; // M350: Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
|
|
case 351: M351(); break; // M351: Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
|
|
#endif
|
|
|
|
#if ENABLED(CASE_LIGHT_ENABLE)
|
|
case 355: M355(); break; // M355: Set case light brightness
|
|
#endif
|
|
|
|
#if ENABLED(DEBUG_GCODE_PARSER)
|
|
case 800: parser.debug(); break; // M800: GCode Parser Test for M
|
|
#endif
|
|
|
|
#if ENABLED(GCODE_REPEAT_MARKERS)
|
|
case 808: M808(); break; // M808: Set / Goto repeat markers
|
|
#endif
|
|
|
|
#if ENABLED(I2C_POSITION_ENCODERS)
|
|
case 860: M860(); break; // M860: Report encoder module position
|
|
case 861: M861(); break; // M861: Report encoder module status
|
|
case 862: M862(); break; // M862: Perform axis test
|
|
case 863: M863(); break; // M863: Calibrate steps/mm
|
|
case 864: M864(); break; // M864: Change module address
|
|
case 865: M865(); break; // M865: Check module firmware version
|
|
case 866: M866(); break; // M866: Report axis error count
|
|
case 867: M867(); break; // M867: Toggle error correction
|
|
case 868: M868(); break; // M868: Set error correction threshold
|
|
case 869: M869(); break; // M869: Report axis error
|
|
#endif
|
|
|
|
#if ENABLED(MAGNETIC_PARKING_EXTRUDER)
|
|
case 951: M951(); break; // M951: Set Magnetic Parking Extruder parameters
|
|
#endif
|
|
|
|
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
|
case 422: M422(); break; // M422: Set Z Stepper automatic alignment position using probe
|
|
#endif
|
|
|
|
#if ALL(HAS_SPI_FLASH, SDSUPPORT, MARLIN_DEV_MODE)
|
|
case 993: M993(); break; // M993: Backup SPI Flash to SD
|
|
case 994: M994(); break; // M994: Load a Backup from SD to SPI Flash
|
|
#endif
|
|
|
|
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
|
|
case 995: M995(); break; // M995: Touch screen calibration for TFT display
|
|
#endif
|
|
|
|
#if ENABLED(PLATFORM_M997_SUPPORT)
|
|
case 997: M997(); break; // M997: Perform in-application firmware update
|
|
#endif
|
|
|
|
case 999: M999(); break; // M999: Restart after being Stopped
|
|
|
|
#if ENABLED(POWER_LOSS_RECOVERY)
|
|
case 413: M413(); break; // M413: Enable/disable/query Power-Loss Recovery
|
|
case 1000: M1000(); break; // M1000: [INTERNAL] Resume from power-loss
|
|
#endif
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
case 1001: M1001(); break; // M1001: [INTERNAL] Handle SD completion
|
|
#endif
|
|
|
|
#if ENABLED(MAX7219_GCODE)
|
|
case 7219: M7219(); break; // M7219: Set LEDs, columns, and rows
|
|
#endif
|
|
|
|
default: parser.unknown_command_warning(); break;
|
|
}
|
|
break;
|
|
|
|
case 'T': T(parser.codenum); break; // Tn: Tool Change
|
|
|
|
#if ENABLED(MARLIN_DEV_MODE)
|
|
case 'D': D(parser.codenum); break; // Dn: Debug codes
|
|
#endif
|
|
|
|
default:
|
|
#if ENABLED(WIFI_CUSTOM_COMMAND)
|
|
if (wifi_custom_command(parser.command_ptr)) break;
|
|
#endif
|
|
parser.unknown_command_warning();
|
|
}
|
|
|
|
if (!no_ok) queue.ok_to_send();
|
|
|
|
SERIAL_OUT(msgDone); // Call the msgDone serial hook to signal command processing done
|
|
}
|
|
|
|
#if ENABLED(M100_FREE_MEMORY_DUMPER)
|
|
void M100_dump_routine(PGM_P const title, const char * const start, const uintptr_t size);
|
|
#endif
|
|
|
|
/**
|
|
* Process a single command and dispatch it to its handler
|
|
* This is called from the main loop()
|
|
*/
|
|
void GcodeSuite::process_next_command() {
|
|
GCodeQueue::CommandLine &command = queue.ring_buffer.peek_next_command();
|
|
|
|
PORT_REDIRECT(SERIAL_PORTMASK(command.port));
|
|
|
|
TERN_(POWER_LOSS_RECOVERY, recovery.queue_index_r = queue.ring_buffer.index_r);
|
|
|
|
if (DEBUGGING(ECHO)) {
|
|
SERIAL_ECHO_START();
|
|
SERIAL_ECHOLN(command.buffer);
|
|
#if ENABLED(M100_FREE_MEMORY_DUMPER)
|
|
SERIAL_ECHOPAIR("slot:", queue.ring_buffer.index_r);
|
|
M100_dump_routine(PSTR(" Command Queue:"), (const char*)&queue.ring_buffer, sizeof(queue.ring_buffer));
|
|
#endif
|
|
}
|
|
|
|
// Parse the next command in the queue
|
|
parser.parse(command.buffer);
|
|
process_parsed_command();
|
|
}
|
|
|
|
/**
|
|
* Run a series of commands, bypassing the command queue to allow
|
|
* G-code "macros" to be called from within other G-code handlers.
|
|
*/
|
|
|
|
void GcodeSuite::process_subcommands_now_P(PGM_P pgcode) {
|
|
char * const saved_cmd = parser.command_ptr; // Save the parser state
|
|
for (;;) {
|
|
PGM_P const delim = strchr_P(pgcode, '\n'); // Get address of next newline
|
|
const size_t len = delim ? delim - pgcode : strlen_P(pgcode); // Get the command length
|
|
char cmd[len + 1]; // Allocate a stack buffer
|
|
strncpy_P(cmd, pgcode, len); // Copy the command to the stack
|
|
cmd[len] = '\0'; // End with a nul
|
|
parser.parse(cmd); // Parse the command
|
|
process_parsed_command(true); // Process it
|
|
if (!delim) break; // Last command?
|
|
pgcode = delim + 1; // Get the next command
|
|
}
|
|
parser.parse(saved_cmd); // Restore the parser state
|
|
}
|
|
|
|
void GcodeSuite::process_subcommands_now(char * gcode) {
|
|
char * const saved_cmd = parser.command_ptr; // Save the parser state
|
|
for (;;) {
|
|
char * const delim = strchr(gcode, '\n'); // Get address of next newline
|
|
if (delim) *delim = '\0'; // Replace with nul
|
|
parser.parse(gcode); // Parse the current command
|
|
process_parsed_command(true); // Process it
|
|
if (!delim) break; // Last command?
|
|
*delim = '\n'; // Put back the newline
|
|
gcode = delim + 1; // Get the next command
|
|
}
|
|
parser.parse(saved_cmd); // Restore the parser state
|
|
}
|
|
|
|
#if ENABLED(HOST_KEEPALIVE_FEATURE)
|
|
|
|
/**
|
|
* Output a "busy" message at regular intervals
|
|
* while the machine is not accepting commands.
|
|
*/
|
|
void GcodeSuite::host_keepalive() {
|
|
const millis_t ms = millis();
|
|
static millis_t next_busy_signal_ms = 0;
|
|
if (!autoreport_paused && host_keepalive_interval && busy_state != NOT_BUSY) {
|
|
if (PENDING(ms, next_busy_signal_ms)) return;
|
|
PORT_REDIRECT(SerialMask::All);
|
|
switch (busy_state) {
|
|
case IN_HANDLER:
|
|
case IN_PROCESS:
|
|
SERIAL_ECHO_MSG(STR_BUSY_PROCESSING);
|
|
break;
|
|
case PAUSED_FOR_USER:
|
|
SERIAL_ECHO_MSG(STR_BUSY_PAUSED_FOR_USER);
|
|
break;
|
|
case PAUSED_FOR_INPUT:
|
|
SERIAL_ECHO_MSG(STR_BUSY_PAUSED_FOR_INPUT);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
next_busy_signal_ms = ms + SEC_TO_MS(host_keepalive_interval);
|
|
}
|
|
|
|
#endif // HOST_KEEPALIVE_FEATURE
|