Firmware2/Marlin/src/module/tool_change.h
GMagician 3c76bda2d8 Fix switching extruder
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
2018-05-19 17:05:15 -05:00

60 lines
1.9 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef TOOL_CHANGE_H
#define TOOL_CHANGE_H
#include "../inc/MarlinConfig.h"
#if DO_SWITCH_EXTRUDER
void move_extruder_servo(const uint8_t e);
#endif
#if ENABLED(SWITCHING_NOZZLE)
void move_nozzle_servo(const uint8_t e);
#endif
#if ENABLED(PARKING_EXTRUDER)
#if ENABLED(PARKING_EXTRUDER_SOLENOIDS_INVERT)
#define PE_MAGNET_ON_STATE !PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE
#else
#define PE_MAGNET_ON_STATE PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE
#endif
void pe_set_magnet(const uint8_t extruder_num, const uint8_t state);
inline void pe_activate_magnet(const uint8_t extruder_num) { pe_set_magnet(extruder_num, PE_MAGNET_ON_STATE); }
inline void pe_deactivate_magnet(const uint8_t extruder_num) { pe_set_magnet(extruder_num, !PE_MAGNET_ON_STATE); }
void pe_magnet_init();
#endif // PARKING_EXTRUDER
/**
* Perform a tool-change, which may result in moving the
* previous tool out of the way and the new tool into place.
*/
void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false);
#endif // TOOL_CHANGE_H