49 lines
1.7 KiB
C++
49 lines
1.7 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
#include <Arduino.h>
|
|
|
|
class Servo {
|
|
static const int MIN_ANGLE = 0,
|
|
MAX_ANGLE = 180,
|
|
MIN_PULSE_WIDTH = 544, // Shortest pulse sent to a servo
|
|
MAX_PULSE_WIDTH = 2400, // Longest pulse sent to a servo
|
|
TAU_MSEC = 20,
|
|
TAU_USEC = (TAU_MSEC * 1000),
|
|
MAX_COMPARE = _BV(16) - 1; // 65535
|
|
|
|
public:
|
|
Servo();
|
|
int8_t attach(const int pin); // attach the given pin to the next free channel, set pinMode, return channel number (-1 on fail)
|
|
void detach();
|
|
void write(int degrees); // set angle
|
|
void move(const int degrees); // attach the servo, then move to value
|
|
int read(); // returns current pulse width as an angle between 0 and 180 degrees
|
|
|
|
private:
|
|
static int channel_next_free;
|
|
int channel;
|
|
int pin;
|
|
int degrees;
|
|
};
|