Firmware2/Marlin/language_an.h
2016-12-12 17:36:33 -08:00

251 lines
13 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Aragonese
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_AN_H
#define LANGUAGE_AN_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " parada."
#define MSG_SD_INSERTED "Tarcheta mesa"
#define MSG_SD_REMOVED "Tarcheta sacada"
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
#define MSG_MAIN "Menu prencipal"
#define MSG_AUTOSTART "Inicio automatico"
#define MSG_DISABLE_STEPPERS "Amortar motors"
#define MSG_AUTO_HOME "Levar a l'orichen"
#define MSG_AUTO_HOME_X "Orichen X"
#define MSG_AUTO_HOME_Y "Orichen Y"
#define MSG_AUTO_HOME_Z "Orichen Z"
#define MSG_LEVEL_BED_HOMING "Orichen XYZ"
#define MSG_LEVEL_BED_WAITING "Encetar (pretar)"
#define MSG_LEVEL_BED_NEXT_POINT "Vinient punto"
#define MSG_LEVEL_BED_DONE "Nivelacion feita!"
#define MSG_LEVEL_BED_CANCEL "Cancelar"
#define MSG_SET_HOME_OFFSETS "Achustar desfases"
#define MSG_HOME_OFFSETS_APPLIED "Desfase aplicau"
#define MSG_SET_ORIGIN "Establir orichen"
#define MSG_PREHEAT_1 "Precalentar PLA"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Tot"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Base"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " Conf"
#define MSG_PREHEAT_2 "Precalentar ABS"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Tot"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Base"
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " Conf"
#define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
#define MSG_SWITCH_PS_OFF "Amortar Fuent"
#define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer"
#define MSG_MOVE_AXIS "Mover Eixes"
#define MSG_LEVEL_BED "Nivelar base"
#define MSG_MOVE_X "Mover X"
#define MSG_MOVE_Y "Mover Y"
#define MSG_MOVE_Z "Mover Z"
#define MSG_MOVE_E "Extrusor"
#define MSG_MOVE_01MM "Mover 0.1mm"
#define MSG_MOVE_1MM "Mover 1mm"
#define MSG_MOVE_10MM "Mover 10mm"
#define MSG_SPEED "Velocidat"
#define MSG_BED_Z "Base Z"
#define MSG_NOZZLE "Boquilla"
#define MSG_BED "Base"
#define MSG_FAN_SPEED "Ixoriador"
#define MSG_FLOW "Fluxo"
#define MSG_CONTROL "Control"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Temperatura Auto."
#define MSG_ON "On"
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Trigar"
#define MSG_ACC "Aceleracion"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vel. viache min"
#define MSG_AMAX "Acel. max"
#define MSG_A_RETRACT "Acel. retrac."
#define MSG_A_TRAVEL "Acel. Viaje"
#define MSG_XSTEPS "X trangos/mm"
#define MSG_YSTEPS "Y trangos/mm"
#define MSG_ZSTEPS "Z trangos/mm"
#define MSG_ESTEPS "E trangos/mm"
#define MSG_E1STEPS "E1 trangos/mm"
#define MSG_E2STEPS "E2 trangos/mm"
#define MSG_E3STEPS "E3 trangos/mm"
#define MSG_E4STEPS "E4 trangos/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimiento"
#define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Contraste"
#define MSG_STORE_EPROM "Alzar memoria"
#define MSG_LOAD_EPROM "Cargar memoria"
#define MSG_RESTORE_FAILSAFE "Restaurar memoria"
#define MSG_REFRESH "Tornar a cargar"
#define MSG_WATCH "Informacion"
#define MSG_PREPARE "Preparar"
#define MSG_TUNE "Achustar"
#define MSG_PAUSE_PRINT "Pausar impresion"
#define MSG_RESUME_PRINT "Contin. impresion"
#define MSG_STOP_PRINT "Detener Impresion"
#define MSG_CARD_MENU "Menu de SD"
#define MSG_NO_CARD "No i hai tarcheta"
#define MSG_DWELL "Reposo..."
#define MSG_USERWAIT "Aguardand ordines"
#define MSG_RESUMING "Contin. impresion"
#define MSG_PRINT_ABORTED "Impres. cancelada"
#define MSG_NO_MOVE "Sin movimiento"
#define MSG_KILLED "Aturada d'emerch."
#define MSG_STOPPED "Aturada."
#define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Retraer mm"
#define MSG_CONTROL_RETRACTF "Retraer F"
#define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm"
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_AUTORETRACT "Retraccion auto."
#define MSG_FILAMENTCHANGE "Cambear filamento"
#define MSG_INIT_SDCARD "Encetan. tarcheta"
#define MSG_CNG_SDCARD "Cambiar tarcheta"
#define MSG_ZPROBE_OUT "Sonda Z fuera"
#define MSG_BLTOUCH_SELFTEST "BLTouch Auto-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_ZPROBE_ZOFFSET "Desfase Z"
#define MSG_BABYSTEP_X "Micropaso X"
#define MSG_BABYSTEP_Y "Micropaso Y"
#define MSG_BABYSTEP_Z "Micropaso Z"
#define MSG_ENDSTOP_ABORT "Cancelado - Endstop"
#define MSG_HEATING_FAILED_LCD "Error: en calentar"
#define MSG_ERR_REDUNDANT_TEMP "Error: temperatura"
#define MSG_THERMAL_RUNAWAY "Error de temperatura"
#define MSG_ERR_MAXTEMP "Error: Temp Maxima"
#define MSG_ERR_MINTEMP "Error: Temp Menima"
#define MSG_ERR_MAXTEMP_BED "Error: Temp Max base"
#define MSG_ERR_MINTEMP_BED "Error: Temp Min base"
#define MSG_ERR_Z_HOMING "G28 Z vedau"
#define MSG_HALTED "IMPRESORA ATURADA"
#define MSG_PLEASE_RESET "Per favor reinic."
#define MSG_SHORT_DAY "d"
#define MSG_SHORT_HOUR "h"
#define MSG_SHORT_MINUTE "m"
#define MSG_HEATING "Calentando..."
#define MSG_HEATING_COMPLETE "Calentamiento listo"
#define MSG_BED_HEATING "Calentando base..."
#define MSG_BED_DONE "Base calient"
#define MSG_DELTA_CALIBRATE "Calibracion Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
#define MSG_DELTA_CALIBRATE_Y "Calibrar Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrar Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrar Centro"
#define MSG_INFO_MENU "Inf. Impresora"
#define MSG_INFO_PRINTER_MENU "Inf. Impresora"
#define MSG_INFO_STATS_MENU "Estadisticas Imp."
#define MSG_INFO_BOARD_MENU "Inf. Controlador"
#define MSG_INFO_THERMISTOR_MENU "Termistors"
#define MSG_INFO_EXTRUDERS "Extrusors"
#define MSG_INFO_BAUDRATE "Baudios"
#define MSG_INFO_PROTOCOL "Protocolo"
#define MSG_LIGHTS_ON "Enchegar luz"
#define MSG_LIGHTS_OFF "Desenchegar luz"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Conteo de impresion"
#define MSG_INFO_COMPLETED_PRINTS "Completadas"
#define MSG_INFO_PRINT_TIME "Tiempo total d'imp."
#define MSG_INFO_PRINT_LONGEST "Impresion mas larga"
#define MSG_INFO_PRINT_FILAMENT "Total d'extrusion"
#else
#define MSG_INFO_PRINT_COUNT "Impresions"
#define MSG_INFO_COMPLETED_PRINTS "Completadas"
#define MSG_INFO_PRINT_TIME "Total"
#define MSG_INFO_PRINT_LONGEST "Mas larga"
#define MSG_INFO_PRINT_FILAMENT "Extrusion"
#endif
#define MSG_INFO_MIN_TEMP "Temperatura menima"
#define MSG_INFO_MAX_TEMP "Temperatura maxima"
#define MSG_INFO_PSU "Fuente de aliment"
#define MSG_DRIVE_STRENGTH "Fuerza d'o driver"
#define MSG_DAC_PERCENT "Driver %"
#define MSG_DAC_EEPROM_WRITE "Escri. DAC EEPROM"
#define MSG_FILAMENT_CHANGE_HEADER "Cambear filamento"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "Opcion de cambio:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruir mas"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resumir imp."
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
#define MSG_FILAMENT_CHANGE_INIT_1 "Aguardand iniciar"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Meta o filamento"
#define MSG_FILAMENT_CHANGE_INSERT_2 "y prete lo boton"
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_2 "d'o filamento"
#define MSG_FILAMENT_CHANGE_INIT_3 "cambear"
#define MSG_FILAMENT_CHANGE_INSERT_3 "pa continar..."
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_2 "d'o fil. cambear"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Meta o filamento"
#endif // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Aguardando a"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "expulsar filament"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Aguardando a"
#define MSG_FILAMENT_CHANGE_LOAD_2 "cargar filamento"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Aguardando a"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extruir filamento"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Aguardando impre."
#define MSG_FILAMENT_CHANGE_RESUME_2 "pa continar"
#endif // LANGUAGE_AN_H