Firmware2/Marlin/pins_BQ_ZUM_MEGA_3D.h
jbrazio b82d91eca6 Added configuration example for the BQ Hephestos 2 3D printer.
Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.
2016-03-06 05:51:56 -08:00

82 lines
1.8 KiB
C

/**
* bq ZUM Mega 3D board definition
*/
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define LED_PIN 13
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_MIN_PIN 3
#define X_MAX_PIN 79
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 77
#define Z_MIN_PIN 18 // Z-MIN Label
#define Z_MAX_PIN 19 // IND_S_5V
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define FAN_PIN 12
#define HEATER_0_PIN 9
#define TEMP_0_PIN 13
#define FAN1_PIN 7
#define HEATER_1_PIN 10
#define TEMP_1_PIN 14
#define HEATER_BED_PIN 8
#define TEMP_BED_PIN 15
#undef DIGIPOTSS_PIN
#define DIGIPOTSS_PIN 22
#define DIGIPOT_CHANNELS { 4, 5, 3 , 0, 1 }
#define PS_ON_PIN 81 // External Power Supply
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define KILL_PIN 41
#define LCD_PIN_BL 39
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define BEEPER_PIN 37
#define SDPOWER -1
#define SDSS 53
#define SD_DETECT_PIN 49
#endif
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
#undef Z_MIN_PIN
#undef Z_MAX_PIN
#define Z_MIN_PIN 19 // IND_S_5V
#define Z_MAX_PIN 18 // Z-MIN Label
#endif