| .. |
|
arduino_due_x.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
compiler.h
|
add USEABLE_HARDWARE_PWM & clear up some compiler warnings
|
2018-01-24 21:42:36 -06:00 |
|
conf_access.h
|
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
|
2018-03-18 19:49:51 -05:00 |
|
conf_clock.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
conf_usb.h
|
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
|
2018-03-18 19:49:51 -05:00 |
|
ctrl_access.c
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
ctrl_access.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
genclk.h
|
Fix DUE incompatible enum type specification (#10017)
|
2018-03-09 02:17:57 -06:00 |
|
mrepeat.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
osc.h
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
pll.h
|
Fix DUE incompatible enum type specification (#10017)
|
2018-03-09 02:17:57 -06:00 |
|
preprocessor.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
sbc_protocol.h
|
Fix DUE incompatible enum type specification (#10017)
|
2018-03-09 02:17:57 -06:00 |
|
sd_mmc_spi_mem.cpp
|
Use serial macro in sd_mmc_spi_mem.cpp for Due
|
2018-02-16 17:57:24 -06:00 |
|
sd_mmc_spi_mem.h
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
spc_protocol.h
|
Fix DUE incompatible enum type specification (#10017)
|
2018-03-09 02:17:57 -06:00 |
|
stringz.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
sysclk.c
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
sysclk.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
tpaste.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
udc_desc.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
udc.c
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
udc.h
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
udd.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
udi_cdc_conf.h
|
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
|
2018-03-18 19:49:51 -05:00 |
|
udi_cdc_desc.c
|
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
|
2018-03-18 19:49:51 -05:00 |
|
udi_cdc.c
|
DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin
|
2018-03-15 00:56:28 -03:00 |
|
udi_cdc.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
udi_composite_desc.c
|
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
|
2018-03-18 19:49:51 -05:00 |
|
udi_msc.c
|
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
|
2018-03-18 19:49:51 -05:00 |
|
udi_msc.h
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
udi.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
uotghs_device_due.c
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
uotghs_device_due.h
|
Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
|
2017-12-21 02:42:46 -03:00 |
|
uotghs_otg.h
|
Trailing whitespace clean
|
2018-01-05 10:11:31 -06:00 |
|
usb_protocol_cdc.h
|
Fix DUE incompatible enum type specification (#10017)
|
2018-03-09 02:17:57 -06:00 |
|
usb_protocol_msc.h
|
Fix DUE incompatible enum type specification (#10017)
|
2018-03-09 02:17:57 -06:00 |
|
usb_protocol.h
|
Fix DUE incompatible enum type specification (#10017)
|
2018-03-09 02:17:57 -06:00 |
|
usb_task.c
|
Fix for DUE - no host support on native USB if SD card not enabled (#10148)
|
2018-03-18 19:49:51 -05:00 |
|
usb_task.h
|
DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin
|
2018-03-15 00:56:28 -03:00 |
