Firmware2/Marlin/pins_TEENSY35_36.h
2017-08-31 18:15:07 -05:00

131 lines
5.3 KiB
C

/****************************************************************************************
* Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments
* Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE!
* http://www.pjrc.com/teensy/teensyduino.html
*
****************************************************************************************/
#if MOTHERBOARD == 841 // BOARD_TEENSY35_36
#define KNOWN_BOARD 1
#define AT90USB 1286 // Disable MarlinSerial etc.
#if !IS_32BIT_TEENSY
#error Oops! Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu.
#endif
#if IS_TEENSY35
#define BOARD_NAME "Teensy3.5"
#elif IS_TEENSY36
#define BOARD_NAME "Teensy3.6"
#endif
#define LARGE_FLASH true
#define USBCON //1286 // Disable MarlinSerial etc.
/*
teemuatlut plan for Teensy3.5 and Teensy3.6:
USB
GND |-----#####-----| VIN 5V
X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND
X_DIR_PIN MISO1 TX1 1 | | 3.3V
Y_STEP_PIN PWM 2 | *NC AREF* | 23 A9 PWM
Y_DIR_PIN SCL2 CAN0TX PWM 3 | *A26 A10* | 22 A8 PWM
Z_STEP_PIN SDA2 CAN0RX PWM 4 | *A25 A11* | 21 A7 PWM CS0 MOSI1 RX1
Z_DIR_PIN MISO1 TX1 PWM 5 | *GND * * 57 | 20 A6 PWM CS0 SCK1 FILWIDTH_PIN
X_ENABLE_PIN PWM 6 | *GND * * 56 | 19 A5 SCL0 E0_STEP_PIN
Y_ENABLE_PIN SCL0 MOSI0 RX3 PWM 7 | * * 55 | 18 A4 SDA0 E0_DIR_PIN
Z_ENABLE_PIN SDA0 MISO0 TX3 PWM 8 | * * 54 | 17 A3 SDA0 E0_ENABLE_PIN
CS0 RX2 PWM 9 | | 16 A2 SCL0 TEMP_0_PIN
CS0 TX2 PWM 10 | | 15 A1 CS0 TEMP_BED_PIN
X_STOP_PIN MOSI0 11 | | 14 A0 PWM CS0 TEMP_1_PIN
Y_STOP_PIN MISO0 12 | | 13 LED SCK0 LED_PIN
3.3V | | GND
Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1
AUX2 25 | 41 * * 52 | A21 DAC0
AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS
AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1
AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1
D10 CONTROLLERFAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM
D9 HEATER_0_PIN CAN0RX PWM 30 | 45 * * 48 | 35 A16 PWM E1_ENABLE_PIN
D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM SDA0 RX5 E1_DIR_PIN
SCK1 TX4 A13 32 |__GND_*_*_3.3V_| 33 A14 PWM SCL0 TX5 E1_STEP_PIN
Interior pins:
LCD_PINS_RS 40 * * 53 SCK2
LCD_PINS_ENABLE 41 * * 52 MOSI2
LCD_PINS_D4 42 * * 51 MISO2
LCD_PINS_D5 CS2 43 * * 50 A24
LCD_PINS_D6 MOSI2 44 * * 49 A23
LCD_PINS_D7 MISO2 45 * * 48 TX6 SDA0 BTN_ENC
BTN_EN1 SCK2 46 * * 47 RX6 SCL0 BTN_EN2
GND * * 3.3V
*/
#define X_STEP_PIN 22
#define X_DIR_PIN 21
#define X_ENABLE_PIN 39
#define Y_STEP_PIN 19
#define Y_DIR_PIN 18
#define Y_ENABLE_PIN 20
#define Z_STEP_PIN 38
#define Z_DIR_PIN 37
#define Z_ENABLE_PIN 17
#define E0_STEP_PIN 31
#define E0_DIR_PIN 30
#define E0_ENABLE_PIN 32
#define E1_STEP_PIN 33
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 35
#define HEATER_0_PIN 30
#define HEATER_1_PIN 36
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 31
#define FAN_PIN 2
#define X_STOP_PIN 24
#define Y_STOP_PIN 26
#define Z_STOP_PIN 28
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2
#define TEMP_BED_PIN 1 // Bed / Analog pin numbering
#define TEMP_1_PIN 0
#define TEMP_2_PIN -1
#define SDPOWER -1
#define SD_DETECT_PIN -1
#define SDSS 39 // 8
#define LED_PIN 13
#define PS_ON_PIN 1
#define KILL_PIN -1
#define ALARM_PIN -1
#define FILWIDTH_PIN 6
#define SOL1_PIN 28
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 13
#define MISO_PIN 12
#define MOSI_PIN 11
#endif
#ifdef ULTRA_LCD
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 41
#define LCD_PINS_D4 42
#define LCD_PINS_D5 43
#define LCD_PINS_D6 44
#define LCD_PINS_D7 45
#define BTN_EN1 46
#define BTN_EN2 47
#define BTN_ENC 48
#endif
#endif // MOTHERBOARD == 841 (Teensy3.5 and Teensy3.6)