107 lines
3.7 KiB
C
107 lines
3.7 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* digipot_mcp4451_I2C_routines.c
|
|
* Adapted from https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
|
|
*/
|
|
|
|
#ifdef TARGET_LPC1768
|
|
|
|
#include "../../../inc/MarlinConfigPre.h"
|
|
|
|
#if MB(MKS_SBASE)
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "digipot_mcp4451_I2C_routines.h"
|
|
|
|
// These two routines are exact copies of the lpc17xx_i2c.c routines. Couldn't link to
|
|
// to the lpc17xx_i2c.c routines so had to copy them into this file & rename them.
|
|
|
|
static uint32_t _I2C_Start(LPC_I2C_TypeDef *I2Cx) {
|
|
// Reset STA, STO, SI
|
|
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC;
|
|
|
|
// Enter to Master Transmitter mode
|
|
I2Cx->I2CONSET = I2C_I2CONSET_STA;
|
|
|
|
// Wait for complete
|
|
while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
|
|
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
|
|
return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
|
|
}
|
|
|
|
static void _I2C_Stop(LPC_I2C_TypeDef *I2Cx) {
|
|
// Make sure start bit is not active
|
|
if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
|
|
I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
|
|
|
|
I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA;
|
|
I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
|
|
}
|
|
|
|
I2C_M_SETUP_Type transferMCfg;
|
|
|
|
#define I2C_status (LPC_I2C1->I2STAT & I2C_STAT_CODE_BITMASK)
|
|
|
|
uint8_t digipot_mcp4451_start(uint8_t sla) { // send slave address and write bit
|
|
// Sometimes TX data ACK or NAK status is returned. That mean the start state didn't
|
|
// happen which means only the value of the slave address was send. Keep looping until
|
|
// the slave address and write bit are actually sent.
|
|
do {
|
|
_I2C_Stop(I2CDEV_M); // output stop state on I2C bus
|
|
_I2C_Start(I2CDEV_M); // output start state on I2C bus
|
|
while ((I2C_status != I2C_I2STAT_M_TX_START)
|
|
&& (I2C_status != I2C_I2STAT_M_TX_RESTART)
|
|
&& (I2C_status != I2C_I2STAT_M_TX_DAT_ACK)
|
|
&& (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for start to be asserted
|
|
|
|
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_STAC; // clear start state before tansmitting slave address
|
|
LPC_I2C1->I2DAT = (sla << 1) & I2C_I2DAT_BITMASK; // transmit slave address & write bit
|
|
LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
|
|
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
|
|
while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK)
|
|
&& (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK)
|
|
&& (I2C_status != I2C_I2STAT_M_TX_DAT_ACK)
|
|
&& (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)) { /* wait for slaw to finish */ }
|
|
} while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) || (I2C_status == I2C_I2STAT_M_TX_DAT_NACK));
|
|
return 1;
|
|
}
|
|
|
|
uint8_t digipot_mcp4451_send_byte(uint8_t data) {
|
|
LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
|
|
LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
|
|
LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
|
|
while (I2C_status != I2C_I2STAT_M_TX_DAT_ACK && I2C_status != I2C_I2STAT_M_TX_DAT_NACK); // wait for xmit to finish
|
|
return 1;
|
|
}
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // MB(MKS_SBASE)
|
|
#endif // TARGET_LPC1768
|