ZetaPhoenix 8ac5b29e02 Changes to M119 response for easier visual comparison ...

Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic.  Added strings to language.h.

Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5b953dd3545a3b2cb96687ebd3d3ba0

2012-09-16 14:51:24 -07:00

..

Gen7

Fix cast warning in Gen7

2012-02-23 18:50:05 +01:00

hardware/tools/avr/etc

ATMega1284P support for Arduino IDE

2012-02-17 11:41:47 +01:00

Sanguino

Fixed compiler warning for Sanguino compile

2012-02-26 17:35:01 +01:00

cardreader.cpp

Added long filename support.

2012-08-22 14:49:57 +02:00

cardreader.h

Added long filename support.

2012-08-22 14:49:57 +02:00

Configuration_adv.h

Limit Switch locations based on MIN/MAX limits and homing direction

2012-09-15 15:25:49 -07:00

Configuration.h

Limit Switch locations based on MIN/MAX limits and homing direction

2012-09-15 15:25:49 -07:00

COPYING

first commit

2011-08-12 22:28:35 +02:00

create_speed_lookuptable.py

Added 20MHz support.

2012-03-11 12:25:04 +01:00

createTemperatureLookup.py

first commit

2011-08-12 22:28:35 +02:00

EEPROMwrite.h

Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.

2012-08-21 23:46:10 +01:00

fastio.h

Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1

2012-02-13 13:07:55 +01:00

language.h

Changes to M119 response for easier visual comparison

2012-09-16 14:51:24 -07:00

LCD Menu Tree.pdf

Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.

2012-08-29 21:08:41 +01:00

Makefile

Makefile: Better display of size (device memory usage)

2012-08-10 19:36:30 +01:00

Marlin.h

added KILL_PIN support / cleaned up manage_inactivity function definition

2012-08-21 14:48:29 +02:00

Marlin.pde

Changes to M119 response for easier visual comparison

2012-09-16 14:51:24 -07:00

MarlinSerial.cpp

Teensylu support.

2012-02-09 19:27:45 +01:00

MarlinSerial.h

Teensylu support.

2012-02-09 19:27:45 +01:00

Menu Plans.xlsx

Tidy up

2012-08-29 22:53:41 +01:00

motion_control.cpp

software_endstops: use *_MIN_POS and *_MAX_POS for arcs

2012-08-10 19:36:30 +01:00

motion_control.h

Removed interrupt nesting in the stepper ISR.

2011-11-27 21:12:55 +01:00

pins.h

Added KILL_PIN -1 to gen7 boards

2012-09-04 08:20:27 +02:00

planner.cpp

added KILL_PIN support / cleaned up manage_inactivity function definition

2012-08-21 14:48:29 +02:00

planner.h

Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.

2012-05-09 08:05:13 +03:00

Sd2Card.cpp

Added long filename support.

2012-08-22 14:49:57 +02:00

Sd2Card.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2PinMap.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdBaseFile.cpp

Added long filename support.

2012-08-22 14:49:57 +02:00

SdBaseFile.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatConfig.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatStructs.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatUtil.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdFatUtil.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdInfo.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

speed_lookuptable.h

Added 20MHz support.

2012-03-11 12:25:04 +01:00

stepper.cpp

added KILL_PIN support / cleaned up manage_inactivity function definition

2012-08-21 14:48:29 +02:00

stepper.h

merging

2011-12-12 20:35:46 +01:00

temperature.cpp

Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)

2012-09-09 16:06:02 -07:00

temperature.h

Added support for 2nd extruder temperature to UltraLCD

2012-04-27 14:51:32 +02:00

thermistortables.h

Correct temptable_55 name.

2012-08-28 19:47:22 +02:00

ultralcd.h

merged with upstream and FIXED AGAIN bad translation commit

2012-08-22 13:05:42 +02:00

ultralcd.pde

Update Marlin/ultralcd.pde

2012-09-14 16:29:43 +03:00

watchdog.h

__ header file replace

2012-06-02 20:44:17 +02:00

watchdog.pde

simplified the includes, makefile now works with arduino23

2011-12-22 14:55:45 +01:00

wiring.h

add wiring.h, that can be used to overwrite:

2011-12-22 14:57:28 +01:00