Firmware2/Marlin/pinsDebug_list.h
Scott Lahteine c9e35004e7 pinsDebug with more features, uses less RAM
I've just uploaded a major change to pinsDebug.
The big change was creating an array in FLASH that contained every
active pin definition. That reduced the RAM memory usage considerably
but increased the FLASH usage.
Creating the array requires going through the pin list twice. Rather
than having two copies of it in the code I moved the list out to another
file (pinsDebug_list.h) and then just did two #includes.
From the user’s view they’ll see the following changes:
1. Now reports all the names assigned to a pin
2. The port is now reported in addition to the pin number.
3. When PWM0A & PWM1C share a pin, both PWMs are reported
4. More PWM/Timer info is reported
One new item that may cause some concern is the usage of the LINE
predefined preprocessor macro. It may not be available if the Arduino
IDE goes to a different compiler.

Includes support for 1284 & 1286 families.

Memory usage changes when enabling PINS_DEBUGGING:
ATmega2560
FLASH
.           without   52576
.           with new  64592
.           with old  62826
.           new-out   12016
.           old-out   10250
.           new-old   1766
.
RAM
.           without   2807
.           with new  2875
.           with old  3545
.           new-out   68
.           old-out   738
.           new-old   -670

==================================================================

minor changes - mostly formatting

1) added newline to end of teensyduino file

2) changed flag name from TEENSYDUINO to TEENSYDUINO_IDE.  Got warnings
about redefining TEENSYDUINO

3) removed some trailing spaces

reduce PROGMEM size & update pin list

Reduced PROGMEM usage by
1) converting often used macro to a function
2) moved as much as possible into the function

This required creating two arrays of address pointers for the PWM
registers.

==================================================================

update with new M3, M4, M5 pin names

==================================================================

report I/O status for unused/unknown pins
2017-04-06 14:46:28 -05:00

776 lines
22 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// Please update this list when adding new pins to Marlin.
// The order doesn't matter.
// Following this pattern is a must.
// If the new pin name is over 28 characters long then pinsDebug.h will need to be modified.
// Pin list updated from 18 FEB 2017 RCBugfix branch - max length of pin name is 24
#if defined(__FD) && __FD >= 0
REPORT_NAME_DIGITAL(__FD, __LINE__ )
#endif
#if defined(__FS) && __FS >= 0
REPORT_NAME_DIGITAL(__FS, __LINE__ )
#endif
#if defined(__GD) && __GD >= 0
REPORT_NAME_DIGITAL(__GD, __LINE__ )
#endif
#if defined(__GS) && __GS >= 0
REPORT_NAME_DIGITAL(__GS, __LINE__ )
#endif
#if PIN_EXISTS(AVR_MISO)
REPORT_NAME_DIGITAL(AVR_MISO_PIN, __LINE__ )
#endif
#if PIN_EXISTS(AVR_MOSI)
REPORT_NAME_DIGITAL(AVR_MOSI_PIN, __LINE__ )
#endif
#if PIN_EXISTS(AVR_SCK)
REPORT_NAME_DIGITAL(AVR_SCK_PIN, __LINE__ )
#endif
#if PIN_EXISTS(AVR_SS)
REPORT_NAME_DIGITAL(AVR_SS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(BEEPER)
REPORT_NAME_DIGITAL(BEEPER_PIN, __LINE__ )
#endif
#if defined(BTN_CENTER) && BTN_CENTER >= 0
REPORT_NAME_DIGITAL(BTN_CENTER, __LINE__ )
#endif
#if defined(BTN_DOWN) && BTN_DOWN >= 0
REPORT_NAME_DIGITAL(BTN_DOWN, __LINE__ )
#endif
#if defined(BTN_DWN) && BTN_DWN >= 0
REPORT_NAME_DIGITAL(BTN_DWN, __LINE__ )
#endif
#if defined(BTN_EN1) && BTN_EN1 >= 0
REPORT_NAME_DIGITAL(BTN_EN1, __LINE__ )
#endif
#if defined(BTN_EN2) && BTN_EN2 >= 0
REPORT_NAME_DIGITAL(BTN_EN2, __LINE__ )
#endif
#if defined(BTN_ENC) && BTN_ENC >= 0
REPORT_NAME_DIGITAL(BTN_ENC, __LINE__ )
#endif
#if defined(BTN_HOME) && BTN_HOME >= 0
REPORT_NAME_DIGITAL(BTN_HOME, __LINE__ )
#endif
#if defined(BTN_LEFT) && BTN_LEFT >= 0
REPORT_NAME_DIGITAL(BTN_LEFT, __LINE__ )
#endif
#if defined(BTN_LFT) && BTN_LFT >= 0
REPORT_NAME_DIGITAL(BTN_LFT, __LINE__ )
#endif
#if defined(BTN_RIGHT) && BTN_RIGHT >= 0
REPORT_NAME_DIGITAL(BTN_RIGHT, __LINE__ )
#endif
#if defined(BTN_RT) && BTN_RT >= 0
REPORT_NAME_DIGITAL(BTN_RT, __LINE__ )
#endif
#if defined(BTN_UP) && BTN_UP >= 0
REPORT_NAME_DIGITAL(BTN_UP, __LINE__ )
#endif
#if PIN_EXISTS(CASE_LIGHT)
REPORT_NAME_DIGITAL(CASE_LIGHT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(CONTROLLERFAN)
REPORT_NAME_DIGITAL(CONTROLLERFAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(CUTOFF_RESET)
REPORT_NAME_DIGITAL(CUTOFF_RESET_PIN, __LINE__ )
#endif
#if PIN_EXISTS(CUTOFF_TEST)
REPORT_NAME_DIGITAL(CUTOFF_TEST_PIN, __LINE__ )
#endif
#if PIN_EXISTS(DAC_DISABLE)
REPORT_NAME_DIGITAL(DAC_DISABLE_PIN, __LINE__ )
#endif
#if defined(DAC_STEPPER_VREF) && DAC_STEPPER_VREF >= 0
REPORT_NAME_DIGITAL(DAC_STEPPER_VREF, __LINE__ )
#endif
#if PIN_EXISTS(DEBUG)
REPORT_NAME_DIGITAL(DEBUG_PIN, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SCL) && DIGIPOTS_I2C_SCL >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SCL, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_E0) && DIGIPOTS_I2C_SDA_E0 >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E0, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_E1) && DIGIPOTS_I2C_SDA_E1 >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E1, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_X) && DIGIPOTS_I2C_SDA_X >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_X, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_Y) && DIGIPOTS_I2C_SDA_Y >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Y, __LINE__ )
#endif
#if defined(DIGIPOTS_I2C_SDA_Z) && DIGIPOTS_I2C_SDA_Z >= 0
REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Z, __LINE__ )
#endif
#if PIN_EXISTS(DIGIPOTSS)
REPORT_NAME_DIGITAL(DIGIPOTSS_PIN, __LINE__ )
#endif
#if defined(DOGLCD_A0) && DOGLCD_A0 >= 0
REPORT_NAME_DIGITAL(DOGLCD_A0, __LINE__ )
#endif
#if defined(DOGLCD_CS) && DOGLCD_CS >= 0
REPORT_NAME_DIGITAL(DOGLCD_CS, __LINE__ )
#endif
#if defined(DOGLCD_MOSI) && DOGLCD_MOSI >= 0
REPORT_NAME_DIGITAL(DOGLCD_MOSI, __LINE__ )
#endif
#if defined(DOGLCD_SCK) && DOGLCD_SCK >= 0
REPORT_NAME_DIGITAL(DOGLCD_SCK, __LINE__ )
#endif
#if PIN_EXISTS(E0_ATT)
REPORT_NAME_DIGITAL(E0_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_AUTO_FAN)
REPORT_NAME_DIGITAL(E0_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_CS)
REPORT_NAME_DIGITAL(E0_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_DIR)
REPORT_NAME_DIGITAL(E0_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_ENABLE)
REPORT_NAME_DIGITAL(E0_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_MS1)
REPORT_NAME_DIGITAL(E0_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_MS2)
REPORT_NAME_DIGITAL(E0_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E0_STEP)
REPORT_NAME_DIGITAL(E0_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_AUTO_FAN)
REPORT_NAME_DIGITAL(E1_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_CS)
REPORT_NAME_DIGITAL(E1_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_DIR)
REPORT_NAME_DIGITAL(E1_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_ENABLE)
REPORT_NAME_DIGITAL(E1_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_MS1)
REPORT_NAME_DIGITAL(E1_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_MS2)
REPORT_NAME_DIGITAL(E1_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E1_STEP)
REPORT_NAME_DIGITAL(E1_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_AUTO_FAN)
REPORT_NAME_DIGITAL(E2_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_DIR)
REPORT_NAME_DIGITAL(E2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_ENABLE)
REPORT_NAME_DIGITAL(E2_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E2_STEP)
REPORT_NAME_DIGITAL(E2_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_AUTO_FAN)
REPORT_NAME_DIGITAL(E3_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_DIR)
REPORT_NAME_DIGITAL(E3_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_ENABLE)
REPORT_NAME_DIGITAL(E3_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E3_STEP)
REPORT_NAME_DIGITAL(E3_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_DIR)
REPORT_NAME_DIGITAL(E4_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_ENABLE)
REPORT_NAME_DIGITAL(E4_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(E4_STEP)
REPORT_NAME_DIGITAL(E4_STEP_PIN, __LINE__ )
#endif
#if defined(encrot0) && encrot0 >= 0
REPORT_NAME_DIGITAL(encrot0, __LINE__ )
#endif
#if defined(encrot1) && encrot1 >= 0
REPORT_NAME_DIGITAL(encrot1, __LINE__ )
#endif
#if defined(encrot2) && encrot2 >= 0
REPORT_NAME_DIGITAL(encrot2, __LINE__ )
#endif
#if defined(encrot3) && encrot3 >= 0
REPORT_NAME_DIGITAL(encrot3, __LINE__ )
#endif
#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A0, __LINE__ )
#endif
#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A0, __LINE__ )
#endif
#if defined(EXT_AUX_A0_IO) && EXT_AUX_A0_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A0_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A1, __LINE__ )
#endif
#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A1, __LINE__ )
#endif
#if defined(EXT_AUX_A1_IO) && EXT_AUX_A1_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A1_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A2, __LINE__ )
#endif
#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A2, __LINE__ )
#endif
#if defined(EXT_AUX_A2_IO) && EXT_AUX_A2_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A2_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A3, __LINE__ )
#endif
#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A3, __LINE__ )
#endif
#if defined(EXT_AUX_A3_IO) && EXT_AUX_A3_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A3_IO, __LINE__ )
#endif
#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(EXT_AUX_A4, __LINE__ )
#endif
#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 >= NUM_ANALOG_INPUTS
REPORT_NAME_DIGITAL(EXT_AUX_A4, __LINE__ )
#endif
#if defined(EXT_AUX_A4_IO) && EXT_AUX_A4_IO >= 0
REPORT_NAME_DIGITAL(EXT_AUX_A4_IO, __LINE__ )
#endif
#if defined(EXT_AUX_PWM_D24) && EXT_AUX_PWM_D24 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_PWM_D24, __LINE__ )
#endif
#if defined(EXT_AUX_RX1_D2) && EXT_AUX_RX1_D2 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_RX1_D2, __LINE__ )
#endif
#if defined(EXT_AUX_SCL_D0) && EXT_AUX_SCL_D0 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_SCL_D0, __LINE__ )
#endif
#if defined(EXT_AUX_SDA_D1) && EXT_AUX_SDA_D1 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_SDA_D1, __LINE__ )
#endif
#if defined(EXT_AUX_TX1_D3) && EXT_AUX_TX1_D3 >= 0
REPORT_NAME_DIGITAL(EXT_AUX_TX1_D3, __LINE__ )
#endif
#if defined(EXTRUDER_0_AUTO_FAN) && EXTRUDER_0_AUTO_FAN >= 0
REPORT_NAME_DIGITAL(EXTRUDER_0_AUTO_FAN, __LINE__ )
#endif
#if defined(EXTRUDER_1_AUTO_FAN) && EXTRUDER_1_AUTO_FAN >= 0
REPORT_NAME_DIGITAL(EXTRUDER_1_AUTO_FAN, __LINE__ )
#endif
#if PIN_EXISTS(FAN)
REPORT_NAME_DIGITAL(FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(FAN1)
REPORT_NAME_DIGITAL(FAN1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(FAN2)
REPORT_NAME_DIGITAL(FAN2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(FIL_RUNOUT)
REPORT_NAME_DIGITAL(FIL_RUNOUT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(FILWIDTH_PIN, __LINE__ )
#endif
#if defined(GEN7_VERSION) && GEN7_VERSION >= 0
REPORT_NAME_DIGITAL(GEN7_VERSION, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_0)
REPORT_NAME_DIGITAL(HEATER_0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_1)
REPORT_NAME_DIGITAL(HEATER_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_2)
REPORT_NAME_DIGITAL(HEATER_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_3)
REPORT_NAME_DIGITAL(HEATER_3_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_4)
REPORT_NAME_DIGITAL(HEATER_4_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_5)
REPORT_NAME_DIGITAL(HEATER_5_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_6)
REPORT_NAME_DIGITAL(HEATER_6_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_7)
REPORT_NAME_DIGITAL(HEATER_7_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HEATER_BED)
REPORT_NAME_DIGITAL(HEATER_BED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(HOME)
REPORT_NAME_DIGITAL(HOME_PIN, __LINE__ )
#endif
#if defined(I2C_SCL) && I2C_SCL >= 0
REPORT_NAME_DIGITAL(I2C_SCL, __LINE__ )
#endif
#if defined(I2C_SDA) && I2C_SDA >= 0
REPORT_NAME_DIGITAL(I2C_SDA, __LINE__ )
#endif
#if PIN_EXISTS(KILL)
REPORT_NAME_DIGITAL(KILL_PIN, __LINE__ )
#endif
#if PIN_EXISTS(LCD_BACKLIGHT)
REPORT_NAME_DIGITAL(LCD_BACKLIGHT_PIN, __LINE__ )
#endif
#if defined(LCD_CONTRAST) && LCD_CONTRAST >= 0
REPORT_NAME_DIGITAL(LCD_CONTRAST, __LINE__ )
#endif
#if PIN_EXISTS(LCD)
REPORT_NAME_DIGITAL(LCD_PINS_D4, __LINE__ )
#endif
#if PIN_EXISTS(LCD)
REPORT_NAME_DIGITAL(LCD_PINS_D5, __LINE__ )
#endif
#if PIN_EXISTS(LCD)
REPORT_NAME_DIGITAL(LCD_PINS_D6, __LINE__ )
#endif
#if PIN_EXISTS(LCD)
REPORT_NAME_DIGITAL(LCD_PINS_D7, __LINE__ )
#endif
#if PIN_EXISTS(LCD)
REPORT_NAME_DIGITAL(LCD_PINS_ENABLE, __LINE__ )
#endif
#if PIN_EXISTS(LCD)
REPORT_NAME_DIGITAL(LCD_PINS_RS, __LINE__ )
#endif
#if defined(LCD_SDSS) && LCD_SDSS >= 0
REPORT_NAME_DIGITAL(LCD_SDSS, __LINE__ )
#endif
#if PIN_EXISTS(LED)
REPORT_NAME_DIGITAL(LED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(MAIN_VOLTAGE_MEASURE_PIN, __LINE__ )
#endif
#if defined(MAX6675_SS) && MAX6675_SS >= 0
REPORT_NAME_DIGITAL(MAX6675_SS, __LINE__ )
#endif
#if PIN_EXISTS(MISO)
REPORT_NAME_DIGITAL(MISO_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_A)
REPORT_NAME_DIGITAL(MOSFET_A_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_B)
REPORT_NAME_DIGITAL(MOSFET_B_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_C)
REPORT_NAME_DIGITAL(MOSFET_C_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSFET_D)
REPORT_NAME_DIGITAL(MOSFET_D_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOSI)
REPORT_NAME_DIGITAL(MOSI_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_E_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_XY_PIN, __LINE__ )
#endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_Z_PIN, __LINE__ )
#endif
#if defined(NUM_TLCS) && NUM_TLCS >= 0
REPORT_NAME_DIGITAL(NUM_TLCS, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E0_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E0_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E1_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E1_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E2_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E2_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(ORIG_E3_AUTO_FAN)
REPORT_NAME_DIGITAL(ORIG_E3_AUTO_FAN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PHOTOGRAPH)
REPORT_NAME_DIGITAL(PHOTOGRAPH_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PS_ON)
REPORT_NAME_DIGITAL(PS_ON_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PWM_1)
REPORT_NAME_DIGITAL(PWM_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(PWM_2)
REPORT_NAME_DIGITAL(PWM_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RAMPS_D10)
REPORT_NAME_DIGITAL(RAMPS_D10_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RAMPS_D8)
REPORT_NAME_DIGITAL(RAMPS_D8_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RAMPS_D9)
REPORT_NAME_DIGITAL(RAMPS_D9_PIN, __LINE__ )
#endif
#if PIN_EXISTS(RX_ENABLE)
REPORT_NAME_DIGITAL(RX_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SAFETY_TRIGGERED)
REPORT_NAME_DIGITAL(SAFETY_TRIGGERED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SCK)
REPORT_NAME_DIGITAL(SCK_PIN, __LINE__ )
#endif
#if defined(SCL) && SCL >= 0
REPORT_NAME_DIGITAL(SCL, __LINE__ )
#endif
#if PIN_EXISTS(SD_DETECT)
REPORT_NAME_DIGITAL(SD_DETECT_PIN, __LINE__ )
#endif
#if defined(SDA) && SDA >= 0
REPORT_NAME_DIGITAL(SDA, __LINE__ )
#endif
#if defined(SDPOWER) && SDPOWER >= 0
REPORT_NAME_DIGITAL(SDPOWER, __LINE__ )
#endif
#if defined(SDSS) && SDSS >= 0
REPORT_NAME_DIGITAL(SDSS, __LINE__ )
#endif
#if PIN_EXISTS(SERVO0)
REPORT_NAME_DIGITAL(SERVO0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SERVO1)
REPORT_NAME_DIGITAL(SERVO1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SERVO2)
REPORT_NAME_DIGITAL(SERVO2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SERVO3)
REPORT_NAME_DIGITAL(SERVO3_PIN, __LINE__ )
#endif
#if defined(SHIFT_CLK) && SHIFT_CLK >= 0
REPORT_NAME_DIGITAL(SHIFT_CLK, __LINE__ )
#endif
#if defined(SHIFT_EN) && SHIFT_EN >= 0
REPORT_NAME_DIGITAL(SHIFT_EN, __LINE__ )
#endif
#if defined(SHIFT_LD) && SHIFT_LD >= 0
REPORT_NAME_DIGITAL(SHIFT_LD, __LINE__ )
#endif
#if defined(SHIFT_OUT) && SHIFT_OUT >= 0
REPORT_NAME_DIGITAL(SHIFT_OUT, __LINE__ )
#endif
#if PIN_EXISTS(SLED)
REPORT_NAME_DIGITAL(SLED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SLEEP_WAKE)
REPORT_NAME_DIGITAL(SLEEP_WAKE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SOL1)
REPORT_NAME_DIGITAL(SOL1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SOL2)
REPORT_NAME_DIGITAL(SOL2_PIN, __LINE__ )
#endif
#if defined(SPARE_IO) && SPARE_IO >= 0
REPORT_NAME_DIGITAL(SPARE_IO, __LINE__ )
#endif
#if PIN_EXISTS(SPINDLE_DIR)
REPORT_NAME_DIGITAL(SPINDLE_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SPINDLE_LASER_ENABLE)
REPORT_NAME_DIGITAL(SPINDLE_LASER_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SPINDLE_SPEED_LASER_POWER)
REPORT_NAME_DIGITAL(SPINDLE_SPEED_LASER_POWER_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SR_CLK)
REPORT_NAME_DIGITAL(SR_CLK_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SR_DATA)
REPORT_NAME_DIGITAL(SR_DATA_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SR_STROBE)
REPORT_NAME_DIGITAL(SR_STROBE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SS)
REPORT_NAME_DIGITAL(SS_PIN, __LINE__ )
#endif
#if defined(STAT_LED_BLUE) && STAT_LED_BLUE >= 0
REPORT_NAME_DIGITAL(STAT_LED_BLUE, __LINE__ )
#endif
#if PIN_EXISTS(STAT_LED_BLUE)
REPORT_NAME_DIGITAL(STAT_LED_BLUE_PIN, __LINE__ )
#endif
#if defined(STAT_LED_RED) && STAT_LED_RED >= 0
REPORT_NAME_DIGITAL(STAT_LED_RED, __LINE__ )
#endif
#if PIN_EXISTS(STAT_LED_RED)
REPORT_NAME_DIGITAL(STAT_LED_RED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(STEPPER_RESET)
REPORT_NAME_DIGITAL(STEPPER_RESET_PIN, __LINE__ )
#endif
#if PIN_EXISTS(SUICIDE)
REPORT_NAME_DIGITAL(SUICIDE_PIN, __LINE__ )
#endif
#if defined(TC1) && TC1 >= 0 && TC1 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TC1, __LINE__ )
#endif
#if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TC2, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_3_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_4_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_BED_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_CHAMBER_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TEMP_X) && TEMP_X_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(TEMP_X_PIN, __LINE__ )
#endif
#if PIN_EXISTS(THERMO_DO)
REPORT_NAME_DIGITAL(THERMO_DO_PIN, __LINE__ )
#endif
#if PIN_EXISTS(THERMO_SCK)
REPORT_NAME_DIGITAL(THERMO_SCK_PIN, __LINE__ )
#endif
#if defined(TLC_BLANK_BIT) && TLC_BLANK_BIT >= 0
REPORT_NAME_DIGITAL(TLC_BLANK_BIT, __LINE__ )
#endif
#if PIN_EXISTS(TLC_BLANK)
REPORT_NAME_DIGITAL(TLC_BLANK_PIN, __LINE__ )
#endif
#if defined(TLC_CLOCK_BIT) && TLC_CLOCK_BIT >= 0
REPORT_NAME_DIGITAL(TLC_CLOCK_BIT, __LINE__ )
#endif
#if PIN_EXISTS(TLC_CLOCK)
REPORT_NAME_DIGITAL(TLC_CLOCK_PIN, __LINE__ )
#endif
#if defined(TLC_DATA_BIT) && TLC_DATA_BIT >= 0
REPORT_NAME_DIGITAL(TLC_DATA_BIT, __LINE__ )
#endif
#if PIN_EXISTS(TLC_DATA)
REPORT_NAME_DIGITAL(TLC_DATA_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TLC_XLAT)
REPORT_NAME_DIGITAL(TLC_XLAT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_0)
REPORT_NAME_DIGITAL(TOOL_0_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_0_PWM)
REPORT_NAME_DIGITAL(TOOL_0_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_1)
REPORT_NAME_DIGITAL(TOOL_1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_1_PWM)
REPORT_NAME_DIGITAL(TOOL_1_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_2)
REPORT_NAME_DIGITAL(TOOL_2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_2_PWM)
REPORT_NAME_DIGITAL(TOOL_2_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_3)
REPORT_NAME_DIGITAL(TOOL_3_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_3_PWM)
REPORT_NAME_DIGITAL(TOOL_3_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TOOL_PWM)
REPORT_NAME_DIGITAL(TOOL_PWM_PIN, __LINE__ )
#endif
#if PIN_EXISTS(TX_ENABLE)
REPORT_NAME_DIGITAL(TX_ENABLE_PIN, __LINE__ )
#endif
#if defined(UI1) && UI1 >= 0
REPORT_NAME_DIGITAL(UI1, __LINE__ )
#endif
#if defined(UI2) && UI2 >= 0
REPORT_NAME_DIGITAL(UI2, __LINE__ )
#endif
#if defined(UNUSED_PWM) && UNUSED_PWM >= 0
REPORT_NAME_DIGITAL(UNUSED_PWM, __LINE__ )
#endif
#if PIN_EXISTS(X_ATT)
REPORT_NAME_DIGITAL(X_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_CS)
REPORT_NAME_DIGITAL(X_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_DIR)
REPORT_NAME_DIGITAL(X_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_ENABLE)
REPORT_NAME_DIGITAL(X_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MAX)
REPORT_NAME_DIGITAL(X_MAX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MIN)
REPORT_NAME_DIGITAL(X_MIN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MS1)
REPORT_NAME_DIGITAL(X_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_MS2)
REPORT_NAME_DIGITAL(X_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_STEP)
REPORT_NAME_DIGITAL(X_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X_STOP)
REPORT_NAME_DIGITAL(X_STOP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_DIR)
REPORT_NAME_DIGITAL(X2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_ENABLE)
REPORT_NAME_DIGITAL(X2_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(X2_STEP)
REPORT_NAME_DIGITAL(X2_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_ATT)
REPORT_NAME_DIGITAL(Y_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_CS)
REPORT_NAME_DIGITAL(Y_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_DIR)
REPORT_NAME_DIGITAL(Y_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_ENABLE)
REPORT_NAME_DIGITAL(Y_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MAX)
REPORT_NAME_DIGITAL(Y_MAX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MIN)
REPORT_NAME_DIGITAL(Y_MIN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MS1)
REPORT_NAME_DIGITAL(Y_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_MS2)
REPORT_NAME_DIGITAL(Y_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_STEP)
REPORT_NAME_DIGITAL(Y_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y_STOP)
REPORT_NAME_DIGITAL(Y_STOP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_DIR)
REPORT_NAME_DIGITAL(Y2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_ENABLE)
REPORT_NAME_DIGITAL(Y2_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Y2_STEP)
REPORT_NAME_DIGITAL(Y2_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_ATT)
REPORT_NAME_DIGITAL(Z_ATT_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_CS)
REPORT_NAME_DIGITAL(Z_CS_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_DIR)
REPORT_NAME_DIGITAL(Z_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_ENABLE)
REPORT_NAME_DIGITAL(Z_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MAX)
REPORT_NAME_DIGITAL(Z_MAX_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MIN)
REPORT_NAME_DIGITAL(Z_MIN_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MIN_PROBE)
REPORT_NAME_DIGITAL(Z_MIN_PROBE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MS1)
REPORT_NAME_DIGITAL(Z_MS1_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_MS2)
REPORT_NAME_DIGITAL(Z_MS2_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_STEP)
REPORT_NAME_DIGITAL(Z_STEP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z_STOP)
REPORT_NAME_DIGITAL(Z_STOP_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_DIR)
REPORT_NAME_DIGITAL(Z2_DIR_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_ENABLE)
REPORT_NAME_DIGITAL(Z2_ENABLE_PIN, __LINE__ )
#endif
#if PIN_EXISTS(Z2_STEP)
REPORT_NAME_DIGITAL(Z2_STEP_PIN, __LINE__ )
#endif