394 lines
12 KiB
C++
394 lines
12 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* This module is off by default, but can be enabled to facilitate the display of
|
|
* extra debug information during code development. It assumes the existence of a
|
|
* Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
|
|
* http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
|
|
*
|
|
* Just connect up +5v and GND to give it power, then connect up the pins assigned
|
|
* in Configuration_adv.h. For example, on the Re-ARM you could use:
|
|
*
|
|
* #define MAX7219_CLK_PIN 77
|
|
* #define MAX7219_DIN_PIN 78
|
|
* #define MAX7219_LOAD_PIN 79
|
|
*
|
|
* Max7219_init() is called automatically at startup, and then there are a number of
|
|
* support functions available to control the LEDs in the 8x8 grid.
|
|
*
|
|
* void Max7219_init();
|
|
* void Max7219_PutByte(uint8_t data);
|
|
* void Max7219(uint8_t reg, uint8_t data);
|
|
* void Max7219_LED_On(uint8_t col, uint8_t row);
|
|
* void Max7219_LED_Off(uint8_t col, uint8_t row);
|
|
* void Max7219_LED_Toggle(uint8_t col, uint8_t row);
|
|
* void Max7219_Clear_Row(uint8_t row);
|
|
* void Max7219_Clear_Column(uint8_t col);
|
|
* void Max7219_Set_Row(uint8_t row, uint8_t val);
|
|
* void Max7219_Set_2_Rows(uint8_t row, uint16_t val);
|
|
* void Max7219_Set_4_Rows(uint8_t row, uint32_t val);
|
|
* void Max7219_Set_Column(uint8_t col, uint8_t val);
|
|
* void Max7219_idle_tasks();
|
|
*/
|
|
|
|
#include "../inc/MarlinConfig.h"
|
|
|
|
#if ENABLED(MAX7219_DEBUG)
|
|
|
|
#include "Max7219_Debug_LEDs.h"
|
|
|
|
#include "../module/planner.h"
|
|
#include "../module/stepper.h"
|
|
#include "../Marlin.h"
|
|
|
|
static uint8_t LEDs[8] = { 0 };
|
|
|
|
void Max7219_PutByte(uint8_t data) {
|
|
CRITICAL_SECTION_START
|
|
for (uint8_t i = 8; i--;) {
|
|
#ifdef CPU_32_BIT // The 32-bit processors are so fast, a small delay in the code is needed
|
|
delayMicroseconds(5); // to let the signal wires stabilize.
|
|
WRITE(MAX7219_CLK_PIN, LOW); // tick
|
|
delayMicroseconds(5);
|
|
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
|
|
delayMicroseconds(5);
|
|
WRITE(MAX7219_CLK_PIN, HIGH); // tock
|
|
delayMicroseconds(5);
|
|
#else
|
|
WRITE(MAX7219_CLK_PIN, LOW); // tick
|
|
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
|
|
WRITE(MAX7219_CLK_PIN, HIGH); // tock
|
|
#endif
|
|
|
|
data <<= 1;
|
|
}
|
|
CRITICAL_SECTION_END
|
|
}
|
|
|
|
void Max7219(const uint8_t reg, const uint8_t data) {
|
|
#ifdef CPU_32_BIT
|
|
delayMicroseconds(5);
|
|
#endif
|
|
CRITICAL_SECTION_START
|
|
WRITE(MAX7219_LOAD_PIN, LOW); // begin
|
|
#ifdef CPU_32_BIT // The 32-bit processors are so fast, a small delay in the code is needed
|
|
delayMicroseconds(5); // to let the signal wires stabilize.
|
|
#endif
|
|
Max7219_PutByte(reg); // specify register
|
|
#ifdef CPU_32_BIT
|
|
delayMicroseconds(5);
|
|
#endif
|
|
Max7219_PutByte(data); // put data
|
|
#ifdef CPU_32_BIT
|
|
delayMicroseconds(5);
|
|
#endif
|
|
WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data
|
|
#ifdef CPU_32_BIT
|
|
delayMicroseconds(5);
|
|
#endif
|
|
WRITE(MAX7219_LOAD_PIN, HIGH);
|
|
CRITICAL_SECTION_END
|
|
#ifdef CPU_32_BIT
|
|
delayMicroseconds(5);
|
|
#endif
|
|
}
|
|
|
|
void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on) {
|
|
if (row > 7 || col > 7) {
|
|
int r,c;
|
|
r = row;
|
|
c = col;
|
|
SERIAL_ECHOPAIR("??? Max7219_LED_Set(",r);
|
|
SERIAL_ECHOPAIR(",",c);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
if (TEST(LEDs[row], col) == on) return; // if LED is already on/off, leave alone
|
|
if (on) SBI(LEDs[row], col); else CBI(LEDs[row], col);
|
|
Max7219(8 - row, LEDs[row]);
|
|
}
|
|
|
|
void Max7219_LED_On(const uint8_t col, const uint8_t row) {
|
|
if (row > 7 || col > 7) {
|
|
int r,c;
|
|
r = row;
|
|
c = col;
|
|
SERIAL_ECHOPAIR("??? Max7219_LED_On(",c);
|
|
SERIAL_ECHOPAIR(",",r);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
Max7219_LED_Set(col, row, true);
|
|
}
|
|
|
|
void Max7219_LED_Off(const uint8_t col, const uint8_t row) {
|
|
if (row > 7 || col > 7) {
|
|
int r,c;
|
|
r = row;
|
|
c = col;
|
|
SERIAL_ECHOPAIR("??? Max7219_LED_Off(",r);
|
|
SERIAL_ECHOPAIR(",",c);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
Max7219_LED_Set(col, row, false);
|
|
}
|
|
|
|
void Max7219_LED_Toggle(const uint8_t col, const uint8_t row) {
|
|
if (row > 7 || col > 7) {
|
|
int r,c;
|
|
r = row;
|
|
c = col;
|
|
SERIAL_ECHOPAIR("??? Max7219_LED_Toggle(",r);
|
|
SERIAL_ECHOPAIR(",",c);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
if (TEST(LEDs[row], col))
|
|
Max7219_LED_Off(col, row);
|
|
else
|
|
Max7219_LED_On(col, row);
|
|
}
|
|
|
|
void Max7219_Clear_Column(const uint8_t col) {
|
|
if (col > 7) {
|
|
int c;
|
|
c = col;
|
|
SERIAL_ECHOPAIR("??? Max7219_Clear_Column(",c);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
LEDs[col] = 0;
|
|
Max7219(8 - col, LEDs[col]);
|
|
}
|
|
|
|
void Max7219_Clear_Row(const uint8_t row) {
|
|
if (row > 7) {
|
|
int r;
|
|
r = row;
|
|
SERIAL_ECHOPAIR("??? Max7219_Clear_Row(",r);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
for (uint8_t c = 0; c <= 7; c++)
|
|
Max7219_LED_Off(c, row);
|
|
}
|
|
|
|
void Max7219_Set_Row(const uint8_t row, const uint8_t val) {
|
|
if (row > 7 || val>255) {
|
|
int r, v;
|
|
r = row;
|
|
v = val;
|
|
SERIAL_ECHOPAIR("??? Max7219_Set_Row(",r);
|
|
SERIAL_ECHOPAIR(",",v);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
for (uint8_t b = 0; b <= 7; b++)
|
|
if (TEST(val, b))
|
|
Max7219_LED_On(7 - b, row);
|
|
else
|
|
Max7219_LED_Off(7 - b, row);
|
|
}
|
|
|
|
void Max7219_Set_2_Rows(const uint8_t row, const uint16_t val) {
|
|
if (row > 6 || val>65535) {
|
|
int r, v;
|
|
r = row;
|
|
v = val;
|
|
SERIAL_ECHOPAIR("??? Max7219_Set_2_Rows(",r);
|
|
SERIAL_ECHOPAIR(",",v);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
Max7219_Set_Row(row+1, (val & 0xff00) >> 8 );
|
|
Max7219_Set_Row(row+0, (val & 0xff));
|
|
}
|
|
|
|
void Max7219_Set_4_Rows(const uint8_t row, const uint32_t val) {
|
|
if (row > 4 ) {
|
|
int r;
|
|
long v;
|
|
r = row;
|
|
v = val;
|
|
SERIAL_ECHOPAIR("??? Max7219_Set_4_Rows(",r);
|
|
SERIAL_ECHOPAIR(",",v);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
Max7219_Set_Row(row+3, (val & 0xff000000) >> 24);
|
|
Max7219_Set_Row(row+2, (val & 0xff0000) >> 16);
|
|
Max7219_Set_Row(row+1, (val & 0xff00) >> 8);
|
|
Max7219_Set_Row(row+0, (val & 0xff));
|
|
}
|
|
|
|
void Max7219_Set_Column(const uint8_t col, const uint8_t val) {
|
|
if (val > 255 || col > 7) {
|
|
int v,c;
|
|
v = val;
|
|
c = col;
|
|
SERIAL_ECHOPAIR("??? Max7219_Column(",c);
|
|
SERIAL_ECHOPAIR(",",v);
|
|
SERIAL_ECHO(")\n");
|
|
return;
|
|
}
|
|
LEDs[col] = val;
|
|
Max7219(8 - col, LEDs[col]);
|
|
}
|
|
|
|
void Max7219_init() {
|
|
uint8_t i, x, y;
|
|
|
|
SET_OUTPUT(MAX7219_DIN_PIN);
|
|
SET_OUTPUT(MAX7219_CLK_PIN);
|
|
|
|
OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
|
|
delay(1);
|
|
|
|
//initiation of the max 7219
|
|
Max7219(max7219_reg_scanLimit, 0x07);
|
|
Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits)
|
|
Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode
|
|
Max7219(max7219_reg_displayTest, 0x00); // no display test
|
|
Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
|
|
// range: 0x00 to 0x0F
|
|
for (i = 0; i <= 7; i++) { // empty registers, turn all LEDs off
|
|
LEDs[i] = 0x00;
|
|
Max7219(i + 1, 0);
|
|
}
|
|
|
|
for (x = 0; x <= 7; x++) // Do an aesthetically pleasing pattern to fully test
|
|
for (y = 0; y <= 7; y++) { // the Max7219 module and LEDs. First, turn them
|
|
Max7219_LED_On(x, y); // all on.
|
|
delay(3);
|
|
}
|
|
|
|
for (x = 0; x <= 7; x++) // Now, turn them all off.
|
|
for (y = 0; y <= 7; y++) {
|
|
Max7219_LED_Off(x, y);
|
|
delay(3); // delay() is OK here. Max7219_init() is only called from
|
|
} // setup() and nothing is running yet.
|
|
|
|
delay(150);
|
|
|
|
for (x = 8; x--;) // Now, do the same thing from the opposite direction
|
|
for (y = 0; y <= 7; y++) {
|
|
Max7219_LED_On(x, y);
|
|
delay(2);
|
|
}
|
|
|
|
for (x = 8; x--;)
|
|
for (y = 0; y <= 7; y++) {
|
|
Max7219_LED_Off(x, y);
|
|
delay(2);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
|
|
* There is very little CPU burden added to the system by displaying information within the idle()
|
|
* task.
|
|
*
|
|
* But with that said, if your debugging can be facilitated by making calls into the library from
|
|
* other places in the code, feel free to do it. The CPU burden for a few calls to toggle an LED
|
|
* or clear a row is not very significant.
|
|
*/
|
|
void Max7219_idle_tasks() {
|
|
#if MAX7219_DEBUG_STEPPER_HEAD || MAX7219_DEBUG_STEPPER_TAIL || MAX7219_DEBUG_STEPPER_QUEUE
|
|
CRITICAL_SECTION_START
|
|
#if MAX7219_DEBUG_STEPPER_HEAD || MAX7219_DEBUG_STEPPER_QUEUE
|
|
uint8_t head;
|
|
head = planner.block_buffer_head;
|
|
#endif
|
|
#if MAX7219_DEBUG_STEPPER_TAIL || MAX7219_DEBUG_STEPPER_QUEUE
|
|
uint8_t tail;
|
|
tail = planner.block_buffer_tail;
|
|
#endif
|
|
CRITICAL_SECTION_END
|
|
#endif
|
|
|
|
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
|
|
static millis_t next_blink = 0;
|
|
if (ELAPSED(millis(), next_blink)) {
|
|
Max7219_LED_Toggle(7, 7);
|
|
next_blink = millis() + 750;
|
|
}
|
|
#endif
|
|
|
|
#ifdef MAX7219_DEBUG_STEPPER_HEAD
|
|
static int16_t last_head_cnt=0;
|
|
if (last_head_cnt != head) {
|
|
if (last_head_cnt < 8)
|
|
Max7219_LED_Off( last_head_cnt, MAX7219_DEBUG_STEPPER_HEAD);
|
|
else
|
|
Max7219_LED_Off( last_head_cnt-8, MAX7219_DEBUG_STEPPER_HEAD+1);
|
|
|
|
last_head_cnt = head;
|
|
if (head < 8)
|
|
Max7219_LED_On(head, MAX7219_DEBUG_STEPPER_HEAD);
|
|
else
|
|
Max7219_LED_On(head-8, MAX7219_DEBUG_STEPPER_HEAD+1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef MAX7219_DEBUG_STEPPER_TAIL
|
|
static int16_t last_tail_cnt=0;
|
|
if (last_tail_cnt != tail) {
|
|
if (last_tail_cnt < 8)
|
|
Max7219_LED_Off( last_tail_cnt, MAX7219_DEBUG_STEPPER_TAIL);
|
|
else
|
|
Max7219_LED_Off( last_tail_cnt-8, MAX7219_DEBUG_STEPPER_TAIL+1);
|
|
|
|
last_tail_cnt = tail;
|
|
if (tail < 8)
|
|
Max7219_LED_On(tail, MAX7219_DEBUG_STEPPER_TAIL);
|
|
else
|
|
Max7219_LED_On(tail-8, MAX7219_DEBUG_STEPPER_TAIL+1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef MAX7219_DEBUG_STEPPER_QUEUE
|
|
static int16_t last_depth = 0;
|
|
int16_t current_depth = head - tail;
|
|
if (current_depth != last_depth) { // usually, no update will be needed.
|
|
if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE;
|
|
NOMORE(current_depth, BLOCK_BUFFER_SIZE);
|
|
NOMORE(current_depth, 16); // if the BLOCK_BUFFER_SIZE is greater than 16, two lines
|
|
// of LEDs is enough to see if the buffer is draining
|
|
|
|
const uint8_t st = min(current_depth, last_depth),
|
|
en = max(current_depth, last_depth);
|
|
if (current_depth < last_depth)
|
|
for (uint8_t i = st; i <= en; i++) // clear the highest order LEDs
|
|
Max7219_LED_Off(i/2, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
|
|
else
|
|
for (uint8_t i = st; i <= en; i++) // set the LEDs to current depth
|
|
Max7219_LED_On(i/2, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
|
|
|
|
last_depth = current_depth;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#endif // MAX7219_DEBUG
|