MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
d015f746cc
Firmware2/Marlin/src/HAL/HAL_STM32F7
History
Scott Lahteine 7a04eb3a8b Fix some comment formatting
2018-10-23 22:35:44 -05:00
..
EEPROM_Emul Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
EmulatedEeprom.cpp Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
endstop_interrupts.h
fastio_STM32F7.h Correct PWM_PIN behavior for STM32 HALs (#12027) 2018-10-07 17:08:01 -05:00
HAL_Servo_STM32F7.cpp
HAL_Servo_STM32F7.h
HAL_spi_STM32F7.cpp
HAL_timers_STM32F7.cpp
HAL_timers_STM32F7.h
HAL.cpp
HAL.h Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
persistent_store_eeprom.cpp Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
pinsDebug.h
README.md
SanityCheck.h Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
spi_pins.h Fix some comment formatting 2018-10-23 22:35:44 -05:00
TMC2660.cpp Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
TMC2660.h Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
watchdog_STM32F7.cpp
watchdog_STM32F7.h

README.md

This HAL is for the STM32F765 board "The Borg" used with STM32Generic Arduino core by danieleff.

Original core is located at:

https://github.com/danieleff/STM32GENERIC

but i have not committed the changes needed for the Borg there yet, so please use:

https://github.com/Spawn32/STM32GENERIC

Unzip it into [Arduino]/hardware folder

Download the latest GNU ARM Embedded Toolchain:

https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads

(The one in Arduino dosen't support STM32F7).

Change compiler.path in platform.txt to point to that you downloaded.

This HAL is in development.

Currently only tested on "The Borg".

You will also need the latest Arduino 1.9.0-beta or newer.

This HAL is a modified version of Chris Barr's Picoprint STM32F4 HAL, so shouldn't be to hard to get it to work on a F4.