892 lines
42 KiB
C++
892 lines
42 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
#include "../DGUSDisplayDef.h"
|
|
|
|
//#define DGUS_MKS_RUNOUT_SENSOR
|
|
|
|
#define LOGO_TIME_DELAY TERN(USE_MKS_GREEN_UI, 8000, 1500)
|
|
|
|
#if ENABLED(DGUS_MKS_RUNOUT_SENSOR)
|
|
#define MT_DET_1_PIN 1
|
|
#define MT_DET_2_PIN 2
|
|
#define MT_DET_PIN_INVERTING false
|
|
#endif
|
|
|
|
#define MKS_FINSH
|
|
|
|
extern uint16_t manualMoveStep;
|
|
extern uint16_t distanceFilament;
|
|
extern uint16_t filamentSpeed_mm_s;
|
|
extern float ZOffset_distance;
|
|
extern float mesh_adj_distance;
|
|
extern float Z_distance;
|
|
|
|
//extern struct { uint16_t h, m, s; } dgus_time;
|
|
|
|
extern xy_int_t mks_corner_offsets[5];
|
|
extern xyz_int_t mks_park_pos;
|
|
extern celsius_t mks_min_extrusion_temp;
|
|
|
|
void MKS_reset_settings(); // Restore persistent settings to defaults
|
|
|
|
void MKS_pause_print_move();
|
|
void MKS_resume_print_move();
|
|
|
|
extern float z_offset_add;
|
|
|
|
extern xyz_int_t tmc_step;
|
|
|
|
extern uint16_t lcd_default_light;
|
|
|
|
#if AXIS_HAS_STEALTHCHOP(X)
|
|
extern uint16_t tmc_x_current;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Y)
|
|
extern uint16_t tmc_y_current;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(Z)
|
|
extern uint16_t tmc_z_current;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E0)
|
|
extern uint16_t tmc_e0_current;
|
|
#endif
|
|
#if AXIS_HAS_STEALTHCHOP(E1)
|
|
extern uint16_t tmc_e1_current;
|
|
#endif
|
|
|
|
typedef enum {
|
|
EX_HEATING,
|
|
EX_HEAT_STARUS,
|
|
EX_CHANGING,
|
|
EX_CHANGE_STATUS,
|
|
EX_NONE,
|
|
} EX_STATUS_DEF;
|
|
|
|
typedef struct {
|
|
//uint8_t ex_change_flag:1;
|
|
//uint8_t ex_heat_flag:1;
|
|
uint8_t ex_load_unload_flag:1; //0:unload 1:load
|
|
EX_STATUS_DEF ex_status;
|
|
uint32_t ex_tick_start;
|
|
uint32_t ex_tick_end;
|
|
uint32_t ex_speed;
|
|
uint32_t ex_length;
|
|
uint32_t ex_need_time;
|
|
} EX_FILAMENT_DEF;
|
|
|
|
extern EX_FILAMENT_DEF ex_filament;
|
|
|
|
typedef enum {
|
|
UNRUNOUT_STATUS,
|
|
RUNOUT_STATUS,
|
|
RUNOUT_WAITTING_STATUS,
|
|
RUNOUT_BEGIN_STATUS,
|
|
} RUNOUT_MKS_STATUS_DEF;
|
|
|
|
typedef struct {
|
|
RUNOUT_MKS_STATUS_DEF runout_status;
|
|
uint8_t pin_status;
|
|
uint8_t de_count;
|
|
uint8_t de_times;
|
|
} RUNOUT_MKS_DEF;
|
|
|
|
extern RUNOUT_MKS_DEF runout_mks;
|
|
|
|
typedef struct {
|
|
uint8_t print_pause_start_flag:1;
|
|
uint8_t runout_flag:1;
|
|
bool blstatus;
|
|
uint16_t x_pos;
|
|
uint16_t y_pos;
|
|
uint16_t z_pos;
|
|
} NOZZLE_PARK_DEF;
|
|
|
|
extern NOZZLE_PARK_DEF nozzle_park_mks;
|
|
|
|
enum DGUSLCD_Screens : uint8_t {
|
|
#if ENABLED(USE_MKS_GREEN_UI)
|
|
|
|
DGUSLCD_SCREEN_BOOT = 33,
|
|
DGUSLCD_SCREEN_MAIN = 60,
|
|
DGUSLCD_SCREEN_STATUS = 60,
|
|
DGUSLCD_SCREEN_STATUS2 = 60,
|
|
DGUSLCD_SCREEN_PREHEAT = 18,
|
|
DGUSLCD_SCREEN_POWER_LOSS = 100,
|
|
DGUSLCD_SCREEN_MANUALMOVE = 192,
|
|
DGUSLCD_SCREEN_UTILITY = 120,
|
|
DGUSLCD_SCREEN_FILAMENT_UNLOADING = 158,
|
|
DGUSLCD_SCREEN_SDFILELIST = 15,
|
|
DGUSLCD_SCREEN_SDPRINTMANIPULATION = 15,
|
|
DGUSLCD_SCREEN_SDPRINTTUNE = 17,
|
|
|
|
MKSLCD_SCREEN_BOOT = 33,
|
|
MKSLCD_SCREEN_HOME = 60, // MKS main page
|
|
MKSLCD_SCREEN_SETTING = 62, // MKS Setting page / no wifi whit
|
|
MKSLCD_SCREEM_TOOL = 64, // MKS Tool page
|
|
MKSLCD_SCREEN_EXTRUDE_P1 = 75,
|
|
MKSLCD_SCREEN_EXTRUDE_P2 = 77,
|
|
MKSLCD_SCREEN_LEVEL = 73,
|
|
MKSLCD_AUTO_LEVEL = 81,
|
|
MKSLCD_SCREEN_MOVE = 66,
|
|
MKSLCD_SCREEN_PRINT = 68,
|
|
MKSLCD_SCREEN_PAUSE = 70,
|
|
MKSLCD_SCREEN_CHOOSE_FILE = 87,
|
|
MKSLCD_SCREEN_NO_CHOOSE_FILE = 88,
|
|
MKSLCD_SCREEN_Config = 101,
|
|
MKSLCD_SCREEN_Config_MOTOR = 103,
|
|
MKSLCD_SCREEN_MOTOR_PLUSE = 104,
|
|
MKSLCD_SCREEN_MOTOR_SPEED = 102,
|
|
MKSLCD_SCREEN_MOTOR_ACC_MAX = 105,
|
|
MKSLCD_SCREEN_PRINT_CONFIG = 72,
|
|
MKSLCD_SCREEN_LEVEL_DATA = 106,
|
|
MKSLCD_PrintPause_SET = 107,
|
|
MKSLCD_FILAMENT_DATA = 50,
|
|
MKSLCD_ABOUT = 83,
|
|
MKSLCD_PID = 108,
|
|
MKSLCD_PAUSE_SETTING_MOVE = 98,
|
|
MKSLCD_PAUSE_SETTING_EX = 96,
|
|
MKSLCD_PAUSE_SETTING_EX2 = 97,
|
|
MKSLCD_SCREEN_PRINT_CONFIRM = 94,
|
|
MKSLCD_SCREEN_EX_CONFIG = 112,
|
|
MKSLCD_SCREEN_EEP_Config = 89,
|
|
MKSLCD_SCREEN_PrintDone = 92,
|
|
MKSLCD_SCREEN_TMC_Config = 111,
|
|
MKSLCD_Screen_Offset_Config = 109,
|
|
MKSLCD_Screen_PMove = 98,
|
|
MKSLCD_Screen_Baby = 79,
|
|
|
|
#else
|
|
|
|
DGUSLCD_SCREEN_BOOT = 120,
|
|
DGUSLCD_SCREEN_MAIN = 1,
|
|
|
|
DGUSLCD_SCREEN_STATUS = 1,
|
|
DGUSLCD_SCREEN_STATUS2 = 1,
|
|
DGUSLCD_SCREEN_PREHEAT = 18,
|
|
DGUSLCD_SCREEN_POWER_LOSS = 100,
|
|
DGUSLCD_SCREEN_MANUALMOVE = 192,
|
|
DGUSLCD_SCREEN_UTILITY = 120,
|
|
DGUSLCD_SCREEN_FILAMENT_UNLOADING = 158,
|
|
DGUSLCD_SCREEN_SDFILELIST = 15,
|
|
DGUSLCD_SCREEN_SDPRINTMANIPULATION = 15,
|
|
DGUSLCD_SCREEN_SDPRINTTUNE = 17,
|
|
|
|
MKSLCD_SCREEN_BOOT = 0,
|
|
MKSLCD_SCREEN_HOME = 1, // MKS main page
|
|
MKSLCD_SCREEN_SETTING = 2, // MKS Setting page / no wifi whit
|
|
MKSLCD_SCREEM_TOOL = 3, // MKS Tool page
|
|
MKSLCD_SCREEN_EXTRUDE_P1 = 4,
|
|
MKSLCD_SCREEN_EXTRUDE_P2 = 11,
|
|
MKSLCD_SCREEN_LEVEL = 5,
|
|
MKSLCD_AUTO_LEVEL = 73,
|
|
MKSLCD_SCREEN_LEVEL_PRESS = 9,
|
|
MKSLCD_SCREEN_MOVE = 6,
|
|
MKSLCD_SCREEN_PRINT = 7,
|
|
MKSLCD_SCREEN_PRINT_PRESS = 13,
|
|
MKSLCD_SCREEN_PAUSE = 26,
|
|
MKSLCD_SCREEN_PAUSE_PRESS = 26,
|
|
MKSLCD_SCREEN_CHOOSE_FILE = 15,
|
|
MKSLCD_SCREEN_NO_CHOOSE_FILE = 17,
|
|
MKSLCD_SCREEN_Config = 46,
|
|
MKSLCD_SCREEN_Config_MOTOR = 47,
|
|
MKSLCD_SCREEN_MOTOR_PLUSE = 51,
|
|
MKSLCD_SCREEN_MOTOR_SPEED = 55,
|
|
MKSLCD_SCREEN_MOTOR_ACC_MAX = 53,
|
|
MKSLCD_SCREEN_PRINT_CONFIG = 60,
|
|
MKSLCD_SCREEN_LEVEL_DATA = 48,
|
|
MKSLCD_PrintPause_SET = 49,
|
|
MKSLCD_FILAMENT_DATA = 50,
|
|
MKSLCD_ABOUT = 36,
|
|
MKSLCD_PID = 56,
|
|
MKSLCD_PAUSE_SETTING_MOVE = 58,
|
|
MKSLCD_PAUSE_SETTING_EX = 57,
|
|
MKSLCD_PAUSE_SETTING_EX2 = 61,
|
|
MKSLCD_SCREEN_NO_FILE = 42,
|
|
MKSLCD_SCREEN_PRINT_CONFIRM = 43,
|
|
MKSLCD_SCREEN_EX_CONFIG = 65,
|
|
MKSLCD_SCREEN_EEP_Config = 20,
|
|
MKSLCD_SCREEN_PrintDone = 25,
|
|
MKSLCD_SCREEN_TMC_Config = 70,
|
|
MKSLCD_Screen_Offset_Config = 30,
|
|
MKSLCD_Screen_PMove = 64,
|
|
MKSLCD_Screen_Baby = 71,
|
|
|
|
#endif
|
|
|
|
DGUSLCD_SCREEN_CONFIRM = 240,
|
|
DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version")
|
|
DGUSLCD_SCREEN_WAITING = 251,
|
|
DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen"
|
|
DGUSLDC_SCREEN_UNUSED = 255
|
|
};
|
|
|
|
// Display Memory layout used (T5UID)
|
|
// Except system variables this is arbitrary, just to organize stuff....
|
|
|
|
// 0x0000 .. 0x0FFF -- System variables and reserved by the display
|
|
// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version
|
|
// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action)
|
|
// 0x3000 .. 0x4FFF -- Marlin Data to be displayed
|
|
// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused
|
|
|
|
// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight,
|
|
// so that we can keep variables nicely together in the address space.
|
|
|
|
// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out.
|
|
|
|
// constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible
|
|
// constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible
|
|
// constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality.
|
|
// constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd.
|
|
|
|
// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup.
|
|
// constexpr uint16_t VP_MSGSTR1 = 0x1100;
|
|
// constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it...
|
|
// constexpr uint16_t VP_MSGSTR2 = 0x1140;
|
|
// constexpr uint8_t VP_MSGSTR2_LEN = 0x20;
|
|
// constexpr uint16_t VP_MSGSTR3 = 0x1180;
|
|
// constexpr uint8_t VP_MSGSTR3_LEN = 0x20;
|
|
// constexpr uint16_t VP_MSGSTR4 = 0x11C0;
|
|
// constexpr uint8_t VP_MSGSTR4_LEN = 0x20;
|
|
|
|
// Screenchange request for screens that only make sense when printer is idle.
|
|
// e.g movement is only allowed if printer is not printing.
|
|
// Marlin must confirm by setting the screen manually.
|
|
// constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000;
|
|
// constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
|
|
// constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)=
|
|
// constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card.
|
|
// constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen.
|
|
|
|
// // Buttons on the SD-Card File listing.
|
|
// constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down
|
|
// constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected.
|
|
// constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed)
|
|
|
|
// constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints
|
|
// constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog)
|
|
// constexpr uint16_t VP_SD_Print_Setting = 0x2040;
|
|
// constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up
|
|
|
|
// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values
|
|
// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support)
|
|
// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us
|
|
// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm.
|
|
// constexpr uint16_t VP_MOVE_X = 0x2100;
|
|
// constexpr uint16_t VP_MOVE_Y = 0x2102;
|
|
// constexpr uint16_t VP_MOVE_Z = 0x2104;
|
|
// constexpr uint16_t VP_MOVE_E0 = 0x2110;
|
|
// constexpr uint16_t VP_MOVE_E1 = 0x2112;
|
|
// //constexpr uint16_t VP_MOVE_E2 = 0x2114;
|
|
// //constexpr uint16_t VP_MOVE_E3 = 0x2116;
|
|
// //constexpr uint16_t VP_MOVE_E4 = 0x2118;
|
|
// //constexpr uint16_t VP_MOVE_E5 = 0x211A;
|
|
// constexpr uint16_t VP_HOME_ALL = 0x2120;
|
|
// constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130;
|
|
// constexpr uint16_t VP_XYZ_HOME = 0x2132;
|
|
|
|
// Power loss recovery
|
|
// constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180;
|
|
|
|
// // Fan Control Buttons , switch between "off" and "on"
|
|
// constexpr uint16_t VP_FAN0_CONTROL = 0x2200;
|
|
// constexpr uint16_t VP_FAN1_CONTROL = 0x2202;
|
|
// constexpr uint16_t VP_FAN2_CONTROL = 0x2204;
|
|
// constexpr uint16_t VP_FAN3_CONTROL = 0x2206;
|
|
|
|
// // Heater Control Buttons , triged between "cool down" and "heat PLA" state
|
|
// constexpr uint16_t VP_E0_CONTROL = 0x2210;
|
|
// constexpr uint16_t VP_E1_CONTROL = 0x2212;
|
|
// //constexpr uint16_t VP_E2_CONTROL = 0x2214;
|
|
// //constexpr uint16_t VP_E3_CONTROL = 0x2216;
|
|
// //constexpr uint16_t VP_E4_CONTROL = 0x2218;
|
|
// //constexpr uint16_t VP_E5_CONTROL = 0x221A;
|
|
// constexpr uint16_t VP_BED_CONTROL = 0x221C;
|
|
|
|
// // Preheat
|
|
// constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220;
|
|
// constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222;
|
|
// //constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224;
|
|
// //constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226;
|
|
// //constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228;
|
|
// //constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A;
|
|
|
|
// // Filament load and unload
|
|
// // constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300;
|
|
// // constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2302;
|
|
|
|
// // Settings store , reset
|
|
|
|
// // PID autotune
|
|
// constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410;
|
|
// constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412;
|
|
// //constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414;
|
|
// //constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416;
|
|
// //constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418;
|
|
// //constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A;
|
|
// constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420;
|
|
// // Calibrate Z
|
|
// constexpr uint16_t VP_Z_CALIBRATE = 0x2430;
|
|
|
|
// First layer cal
|
|
// constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded
|
|
|
|
// Firmware version on the boot screen.
|
|
// constexpr uint16_t VP_MARLIN_VERSION = 0x3000;
|
|
// constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed.
|
|
|
|
// Place for status messages.
|
|
constexpr uint16_t VP_M117 = 0x7020;
|
|
constexpr uint8_t VP_M117_LEN = 0x20;
|
|
|
|
// // Temperatures.
|
|
// constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer
|
|
// constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer
|
|
// // reserved to support up to 6 Extruders:
|
|
// constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer
|
|
// constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer
|
|
// constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer
|
|
// constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer
|
|
// constexpr uint16_t VP_T_E5_Is = 0x3074; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_E5_Set = 0x3076; // 2 Byte Integer
|
|
// constexpr uint16_t VP_T_E6_Is = 0x3078; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_E6_Set = 0x307A; // 2 Byte Integer
|
|
// constexpr uint16_t VP_T_E7_Is = 0x3078; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_E7_Set = 0x307A; // 2 Byte Integer
|
|
|
|
|
|
// constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer
|
|
// constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer
|
|
|
|
// constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer
|
|
// constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer
|
|
// // reserved for up to 6 Extruders:
|
|
// constexpr uint16_t VP_Flowrate_E2 = 0x3094;
|
|
// constexpr uint16_t VP_Flowrate_E3 = 0x3096;
|
|
// constexpr uint16_t VP_Flowrate_E4 = 0x3098;
|
|
// constexpr uint16_t VP_Flowrate_E5 = 0x309A;
|
|
|
|
// constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100)
|
|
// constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100)
|
|
// constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100)
|
|
// constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100)
|
|
// constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100)
|
|
|
|
// Actual Position
|
|
// constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy
|
|
// constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy
|
|
// constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy
|
|
// constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy
|
|
|
|
// constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100)
|
|
|
|
// constexpr uint16_t VP_PrintTime = 0x3140;
|
|
// constexpr uint16_t VP_PrintTime_LEN = 32;
|
|
|
|
// constexpr uint16_t VP_PrintAccTime = 0x3160;
|
|
// constexpr uint16_t VP_PrintAccTime_LEN = 32;
|
|
|
|
// constexpr uint16_t VP_PrintsTotal = 0x3180;
|
|
// constexpr uint16_t VP_PrintsTotal_LEN = 16;
|
|
|
|
// // SDCard File Listing
|
|
// constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries.
|
|
// constexpr uint16_t DGUS_SD_FILESPERSCREEN = 8; // FIXME move that info to the display and read it from there.
|
|
// constexpr uint16_t VP_SD_FileName0 = 0x3200;
|
|
// constexpr uint16_t VP_SD_FileName1 = 0x3220;
|
|
// constexpr uint16_t VP_SD_FileName2 = 0x3240;
|
|
// constexpr uint16_t VP_SD_FileName3 = 0x3260;
|
|
// constexpr uint16_t VP_SD_FileName4 = 0x3280;
|
|
// constexpr uint16_t VP_SD_FileName5 = 0x32A0;
|
|
// constexpr uint16_t VP_SD_FileName6 = 0x32C0;
|
|
// constexpr uint16_t VP_SD_FileName7 = 0x32E0;
|
|
|
|
// Heater status
|
|
constexpr uint16_t VP_E0_STATUS = 0x3410;
|
|
constexpr uint16_t VP_E1_STATUS = 0x3412;
|
|
//constexpr uint16_t VP_E2_STATUS = 0x3414;
|
|
//constexpr uint16_t VP_E3_STATUS = 0x3416;
|
|
//constexpr uint16_t VP_E4_STATUS = 0x3418;
|
|
//constexpr uint16_t VP_E5_STATUS = 0x341A;
|
|
constexpr uint16_t VP_MOVE_OPTION = 0x3500;
|
|
|
|
// // PIDs
|
|
// constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4
|
|
// constexpr uint16_t VP_E0_PID_I = 0x3702;
|
|
// constexpr uint16_t VP_E0_PID_D = 0x3704;
|
|
// constexpr uint16_t VP_E1_PID_P = 0x3706; // at the moment , 2 byte unsigned int , 0~1638.4
|
|
// constexpr uint16_t VP_E1_PID_I = 0x3708;
|
|
// constexpr uint16_t VP_E1_PID_D = 0x370A;
|
|
// constexpr uint16_t VP_BED_PID_P = 0x3710;
|
|
// constexpr uint16_t VP_BED_PID_I = 0x3712;
|
|
// constexpr uint16_t VP_BED_PID_D = 0x3714;
|
|
|
|
// Wating screen status
|
|
constexpr uint16_t VP_WAITING_STATUS = 0x3800;
|
|
|
|
// SPs for certain variables...
|
|
// located at 0x5000 and up
|
|
// Not used yet!
|
|
// This can be used e.g to make controls / data display invisible
|
|
constexpr uint16_t SP_T_E0_Is = 0x5000;
|
|
constexpr uint16_t SP_T_E0_Set = 0x5010;
|
|
constexpr uint16_t SP_T_E1_Is = 0x5020;
|
|
constexpr uint16_t SP_T_Bed_Is = 0x5030;
|
|
constexpr uint16_t SP_T_Bed_Set = 0x5040;
|
|
|
|
/*************************************************************************************************************************
|
|
*************************************************************************************************************************
|
|
* DGUS for MKS Mem layout
|
|
************************************************************************************************************************
|
|
************************************************************************************************************************/
|
|
|
|
#if ENABLED(MKS_FINSH)
|
|
/* -------------------------------0x1000-0x1FFF------------------------------- */
|
|
constexpr uint16_t VP_MSGSTR1 = 0x1100;
|
|
constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it...
|
|
constexpr uint16_t VP_MSGSTR2 = 0x1140;
|
|
constexpr uint8_t VP_MSGSTR2_LEN = 0x20;
|
|
constexpr uint16_t VP_MSGSTR3 = 0x1180;
|
|
constexpr uint8_t VP_MSGSTR3_LEN = 0x20;
|
|
constexpr uint16_t VP_MSGSTR4 = 0x11C0;
|
|
constexpr uint8_t VP_MSGSTR4_LEN = 0x20;
|
|
|
|
constexpr uint16_t VP_MARLIN_VERSION = 0x1A00;
|
|
constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed.
|
|
|
|
|
|
constexpr uint16_t VP_SCREENCHANGE_ASK = 0x1500;
|
|
constexpr uint16_t VP_SCREENCHANGE = 0x1501; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
|
|
constexpr uint16_t VP_TEMP_ALL_OFF = 0x1502; // Turn all heaters off. Value arbitrary ;)=
|
|
constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x1503; // "Print" Button touched -- go only there if there is an SD Card.
|
|
constexpr uint16_t VP_CONFIRMED = 0x1510; // OK on confirm screen.
|
|
|
|
constexpr uint16_t VP_BACK_PAGE = 0x1600;
|
|
constexpr uint16_t VP_SETTINGS = 0x1620;
|
|
// Power loss recovery
|
|
constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x1680;
|
|
/* -------------------------------0x2000-0x2FFF------------------------------- */
|
|
// Temperatures.
|
|
constexpr uint16_t VP_T_E0_Is = 0x2000; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E0_Set = 0x2004; // 2 Byte Integer
|
|
constexpr uint16_t VP_T_E1_Is = 0x2008; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E1_Set = 0x200B; // 2 Byte Integer
|
|
constexpr uint16_t VP_T_E2_Is = 0x2010; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E2_Set = 0x2014; // 2 Byte Integer
|
|
constexpr uint16_t VP_T_E3_Is = 0x2018; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E3_Set = 0x201B; // 2 Byte Integer
|
|
constexpr uint16_t VP_T_E4_Is = 0x2020; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E4_Set = 0x2024; // 2 Byte Integer
|
|
constexpr uint16_t VP_T_E5_Is = 0x2028; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E5_Set = 0x202B; // 2 Byte Integer
|
|
constexpr uint16_t VP_T_E6_Is = 0x2030; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E6_Set = 0x2034; // 2 Byte Integer
|
|
constexpr uint16_t VP_T_E7_Is = 0x2038; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_E7_Set = 0x203B; // 2 Byte Integer
|
|
|
|
constexpr uint16_t VP_T_Bed_Is = 0x2040; // 4 Byte Integer
|
|
constexpr uint16_t VP_T_Bed_Set = 0x2044; // 2 Byte Integer
|
|
|
|
constexpr uint16_t VP_Min_EX_T_E = 0x2100;
|
|
|
|
constexpr uint16_t VP_Flowrate_E0 = 0x2200; // 2 Byte Integer
|
|
constexpr uint16_t VP_Flowrate_E1 = 0x2202; // 2 Byte Integer
|
|
constexpr uint16_t VP_Flowrate_E2 = 0x2204;
|
|
constexpr uint16_t VP_Flowrate_E3 = 0x2206;
|
|
constexpr uint16_t VP_Flowrate_E4 = 0x2208;
|
|
constexpr uint16_t VP_Flowrate_E5 = 0x220A;
|
|
constexpr uint16_t VP_Flowrate_E6 = 0x220C;
|
|
constexpr uint16_t VP_Flowrate_E7 = 0x220E;
|
|
|
|
// Move
|
|
constexpr uint16_t VP_MOVE_X = 0x2300;
|
|
constexpr uint16_t VP_MOVE_Y = 0x2302;
|
|
constexpr uint16_t VP_MOVE_Z = 0x2304;
|
|
constexpr uint16_t VP_MOVE_E0 = 0x2310;
|
|
constexpr uint16_t VP_MOVE_E1 = 0x2312;
|
|
constexpr uint16_t VP_MOVE_E2 = 0x2314;
|
|
constexpr uint16_t VP_MOVE_E3 = 0x2316;
|
|
constexpr uint16_t VP_MOVE_E4 = 0x2318;
|
|
constexpr uint16_t VP_MOVE_E5 = 0x231A;
|
|
constexpr uint16_t VP_MOVE_E6 = 0x231C;
|
|
constexpr uint16_t VP_MOVE_E7 = 0x231E;
|
|
constexpr uint16_t VP_HOME_ALL = 0x2320;
|
|
constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2330;
|
|
constexpr uint16_t VP_MOVE_DISTANCE = 0x2334;
|
|
constexpr uint16_t VP_X_HOME = 0x2336;
|
|
constexpr uint16_t VP_Y_HOME = 0x2338;
|
|
constexpr uint16_t VP_Z_HOME = 0x233A;
|
|
|
|
// Fan Control Buttons , switch between "off" and "on"
|
|
constexpr uint16_t VP_FAN0_CONTROL = 0x2350;
|
|
constexpr uint16_t VP_FAN1_CONTROL = 0x2352;
|
|
constexpr uint16_t VP_FAN2_CONTROL = 0x2354;
|
|
constexpr uint16_t VP_FAN3_CONTROL = 0x2356;
|
|
constexpr uint16_t VP_FAN4_CONTROL = 0x2358;
|
|
constexpr uint16_t VP_FAN5_CONTROL = 0x235A;
|
|
|
|
constexpr uint16_t VP_LANGUAGE_CHANGE = 0x2380;
|
|
constexpr uint16_t VP_LANGUAGE_CHANGE1 = 0x2382;
|
|
constexpr uint16_t VP_LANGUAGE_CHANGE2 = 0x2384;
|
|
constexpr uint16_t VP_LANGUAGE_CHANGE3 = 0x2386;
|
|
constexpr uint16_t VP_LANGUAGE_CHANGE4 = 0x2388;
|
|
constexpr uint16_t VP_LANGUAGE_CHANGE5 = 0x238A;
|
|
|
|
// LEVEL
|
|
constexpr uint16_t VP_LEVEL_POINT = 0x2400;
|
|
constexpr uint16_t VP_MESH_LEVEL_POINT = 0x2410;
|
|
constexpr uint16_t VP_MESH_LEVEL_ADJUST = 0x2412;
|
|
constexpr uint16_t VP_MESH_LEVEL_DIP = 0x2414;
|
|
constexpr uint16_t VP_MESH_LEVEL_POINT_X = 0x2416;
|
|
constexpr uint16_t VP_MESH_LEVEL_POINT_Y = 0x2418;
|
|
constexpr uint16_t VP_LEVEL_BUTTON = 0x2420;
|
|
constexpr uint16_t VP_MESH_LEVEL_POINT_DIS = 0x2422;
|
|
constexpr uint16_t VP_MESH_LEVEL_BACK = 0x2424;
|
|
|
|
constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2500;
|
|
constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2504;
|
|
constexpr uint16_t VP_LOAD_Filament = 0x2508;
|
|
// constexpr uint16_t VP_LOAD_UNLOAD_Cancle = 0x250A;
|
|
constexpr uint16_t VP_UNLOAD_Filament = 0x250B;
|
|
constexpr uint16_t VP_Filament_distance = 0x2600;
|
|
constexpr uint16_t VP_Filament_speed = 0x2604;
|
|
constexpr uint16_t VP_MIN_EX_T = 0x2606;
|
|
|
|
constexpr uint16_t VP_E1_Filament_distance = 0x2614;
|
|
constexpr uint16_t VP_E1_Filament_speed = 0x2616;
|
|
constexpr uint16_t VP_E1_MIN_EX_T = 0x2618;
|
|
|
|
constexpr uint16_t VP_Fan0_Percentage = 0x2700; // 2 Byte Integer (0..100)
|
|
constexpr uint16_t VP_Fan1_Percentage = 0x2702; // 2 Byte Integer (0..100)
|
|
constexpr uint16_t VP_Fan2_Percentage = 0x2704; // 2 Byte Integer (0..100)
|
|
constexpr uint16_t VP_Fan3_Percentage = 0x2706; // 2 Byte Integer (0..100)
|
|
constexpr uint16_t VP_Feedrate_Percentage = 0x2708; // 2 Byte Integer (0..100)
|
|
|
|
// Fan status
|
|
constexpr uint16_t VP_FAN0_STATUS = 0x2710;
|
|
constexpr uint16_t VP_FAN1_STATUS = 0x2712;
|
|
constexpr uint16_t VP_FAN2_STATUS = 0x2714;
|
|
constexpr uint16_t VP_FAN3_STATUS = 0x2716;
|
|
|
|
// Step per mm
|
|
constexpr uint16_t VP_X_STEP_PER_MM = 0x2900; // at the moment , 2 byte unsigned int , 0~1638.4
|
|
constexpr uint16_t VP_Y_STEP_PER_MM = 0x2904;
|
|
constexpr uint16_t VP_Z_STEP_PER_MM = 0x2908;
|
|
constexpr uint16_t VP_E0_STEP_PER_MM = 0x2910;
|
|
constexpr uint16_t VP_E1_STEP_PER_MM = 0x2912;
|
|
constexpr uint16_t VP_E2_STEP_PER_MM = 0x2914;
|
|
constexpr uint16_t VP_E3_STEP_PER_MM = 0x2916;
|
|
constexpr uint16_t VP_E4_STEP_PER_MM = 0x2918;
|
|
constexpr uint16_t VP_E5_STEP_PER_MM = 0x291A;
|
|
constexpr uint16_t VP_E6_STEP_PER_MM = 0x291C;
|
|
constexpr uint16_t VP_E7_STEP_PER_MM = 0x291E;
|
|
|
|
constexpr uint16_t VP_X_MAX_SPEED = 0x2A00;
|
|
constexpr uint16_t VP_Y_MAX_SPEED = 0x2A04;
|
|
constexpr uint16_t VP_Z_MAX_SPEED = 0x2A08;
|
|
constexpr uint16_t VP_E0_MAX_SPEED = 0x2A0C;
|
|
constexpr uint16_t VP_E1_MAX_SPEED = 0x2A10;
|
|
|
|
constexpr uint16_t VP_X_ACC_MAX_SPEED = 0x2A28;
|
|
constexpr uint16_t VP_Y_ACC_MAX_SPEED = 0x2A2C;
|
|
constexpr uint16_t VP_Z_ACC_MAX_SPEED = 0x2A30;
|
|
constexpr uint16_t VP_E0_ACC_MAX_SPEED = 0x2A34;
|
|
constexpr uint16_t VP_E1_ACC_MAX_SPEED = 0x2A38;
|
|
|
|
constexpr uint16_t VP_TRAVEL_SPEED = 0x2A3C;
|
|
constexpr uint16_t VP_FEEDRATE_MIN_SPEED = 0x2A40;
|
|
constexpr uint16_t VP_T_F_SPEED = 0x2A44;
|
|
constexpr uint16_t VP_ACC_SPEED = 0x2A48;
|
|
|
|
/* -------------------------------0x3000-0x3FFF------------------------------- */
|
|
// Buttons on the SD-Card File listing.
|
|
constexpr uint16_t VP_SD_ScrollEvent = 0x3020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down
|
|
constexpr uint16_t VP_SD_FileSelected = 0x3022; // Number of file field selected.
|
|
constexpr uint16_t VP_SD_FileSelectConfirm = 0x3024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed)
|
|
constexpr uint16_t VP_SD_ResumePauseAbort = 0x3026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints
|
|
constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x3028; // Abort print confirmation (virtual, will be injected by the confirm dialog)
|
|
constexpr uint16_t VP_SD_Print_Setting = 0x3040;
|
|
constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x3050; // Data: 0 down, 1 up
|
|
constexpr uint16_t VP_SD_Print_LiveAdjustZ_Confirm = 0x3060;
|
|
constexpr uint16_t VP_ZOffset_Distance = 0x3070;
|
|
constexpr uint16_t VP_ZOffset_DE_DIS = 0x3080;
|
|
// SDCard File Listing
|
|
constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries.
|
|
constexpr uint16_t DGUS_SD_FILESPERSCREEN = 10; // FIXME move that info to the display and read it from there.
|
|
constexpr uint16_t VP_SD_FileName0 = 0x3100;
|
|
constexpr uint16_t VP_SD_FileName1 = 0x3120;
|
|
constexpr uint16_t VP_SD_FileName2 = 0x3140;
|
|
constexpr uint16_t VP_SD_FileName3 = 0x3160;
|
|
constexpr uint16_t VP_SD_FileName4 = 0x3180;
|
|
constexpr uint16_t VP_SD_FileName5 = 0x31A0;
|
|
constexpr uint16_t VP_SD_FileName6 = 0x31C0;
|
|
constexpr uint16_t VP_SD_FileName7 = 0x31E0;
|
|
constexpr uint16_t VP_SD_FileName8 = 0x3200;
|
|
constexpr uint16_t VP_SD_FileName9 = 0x3220;
|
|
|
|
constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0;
|
|
constexpr uint16_t VP_SD_Print_Baby = 0x32B0;
|
|
constexpr uint16_t VP_SD_Print_Filename = 0x32C0;
|
|
|
|
// X Y Z Point
|
|
constexpr uint16_t VP_XPos = 0x3300; // 4 Byte Fixed point number; format xxx.yy
|
|
constexpr uint16_t VP_YPos = 0x3302; // 4 Byte Fixed point number; format xxx.yy
|
|
constexpr uint16_t VP_ZPos = 0x3304; // 4 Byte Fixed point number; format xxx.yy
|
|
constexpr uint16_t VP_EPos = 0x3306; // 4 Byte Fixed point number; format xxx.yy
|
|
|
|
// Print
|
|
constexpr uint16_t VP_PrintProgress_Percentage = 0x3330; // 2 Byte Integer (0..100)
|
|
constexpr uint16_t VP_PrintTime = 0x3340;
|
|
constexpr uint16_t VP_PrintTime_LEN = 32;
|
|
constexpr uint16_t VP_PrintAccTime = 0x3360;
|
|
constexpr uint16_t VP_PrintAccTime_LEN = 32;
|
|
constexpr uint16_t VP_PrintsTotal = 0x3380;
|
|
constexpr uint16_t VP_PrintsTotal_LEN = 16;
|
|
|
|
constexpr uint16_t VP_File_Pictutr0 = 0x3400;
|
|
constexpr uint16_t VP_File_Pictutr1 = 0x3402;
|
|
constexpr uint16_t VP_File_Pictutr2 = 0x3404;
|
|
constexpr uint16_t VP_File_Pictutr3 = 0x3406;
|
|
constexpr uint16_t VP_File_Pictutr4 = 0x3408;
|
|
constexpr uint16_t VP_File_Pictutr5 = 0x340A;
|
|
constexpr uint16_t VP_File_Pictutr6 = 0x340C;
|
|
constexpr uint16_t VP_File_Pictutr7 = 0x340E;
|
|
constexpr uint16_t VP_File_Pictutr8 = 0x3410;
|
|
constexpr uint16_t VP_File_Pictutr9 = 0x3412;
|
|
|
|
constexpr uint16_t VP_BED_STATUS = 0x341C;
|
|
|
|
constexpr uint16_t VP_TMC_X_STEP = 0x3430;
|
|
constexpr uint16_t VP_TMC_Y_STEP = 0x3432;
|
|
constexpr uint16_t VP_TMC_Z_STEP = 0x3434;
|
|
|
|
constexpr uint16_t VP_TMC_X1_Current = 0x3436;
|
|
constexpr uint16_t VP_TMC_Y1_Current = 0x3438;
|
|
constexpr uint16_t VP_TMC_X_Current = 0x343A;
|
|
constexpr uint16_t VP_TMC_Y_Current = 0x343C;
|
|
constexpr uint16_t VP_TMC_Z_Current = 0x343E;
|
|
constexpr uint16_t VP_TMC_E0_Current = 0x3440;
|
|
constexpr uint16_t VP_TMC_E1_Current = 0x3442;
|
|
constexpr uint16_t VP_TMC_Z1_Current = 0x3444;
|
|
|
|
|
|
constexpr uint16_t VP_PrintTime_H = 0x3500;
|
|
constexpr uint16_t VP_PrintTime_M = 0x3502;
|
|
constexpr uint16_t VP_PrintTime_S = 0x3504;
|
|
|
|
// PIDs
|
|
constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4
|
|
constexpr uint16_t VP_E0_PID_I = 0x3702;
|
|
constexpr uint16_t VP_E0_PID_D = 0x3704;
|
|
constexpr uint16_t VP_E1_PID_P = 0x3706; // at the moment , 2 byte unsigned int , 0~1638.4
|
|
constexpr uint16_t VP_E1_PID_I = 0x3708;
|
|
constexpr uint16_t VP_E1_PID_D = 0x370A;
|
|
constexpr uint16_t VP_BED_PID_P = 0x3710;
|
|
constexpr uint16_t VP_BED_PID_I = 0x3712;
|
|
constexpr uint16_t VP_BED_PID_D = 0x3714;
|
|
|
|
constexpr uint16_t VP_EEPROM_CTRL = 0x3720;
|
|
|
|
constexpr uint16_t VP_OFFSET_X = 0x3724;
|
|
constexpr uint16_t VP_OFFSET_Y = 0x3728;
|
|
constexpr uint16_t VP_OFFSET_Z = 0x372B;
|
|
|
|
// PID autotune
|
|
constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x3800;
|
|
constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x3802;
|
|
constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x3804;
|
|
constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x3806;
|
|
constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x3808;
|
|
constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x380A;
|
|
constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x380C;
|
|
// Calibrate Z
|
|
constexpr uint16_t VP_Z_CALIBRATE = 0x3810;
|
|
|
|
constexpr uint16_t VP_AutoTurnOffSw = 0x3812;
|
|
constexpr uint16_t VP_LCD_BLK = 0x3814;
|
|
|
|
constexpr uint16_t VP_X_PARK_POS = 0x3900;
|
|
constexpr uint16_t VP_Y_PARK_POS = 0x3902;
|
|
constexpr uint16_t VP_Z_PARK_POS = 0x3904;
|
|
|
|
/* -------------------------------0x4000-0x4FFF------------------------------- */
|
|
// Heater Control Buttons , triged between "cool down" and "heat PLA" state
|
|
constexpr uint16_t VP_E0_CONTROL = 0x4010;
|
|
constexpr uint16_t VP_E1_CONTROL = 0x4012;
|
|
//constexpr uint16_t VP_E2_CONTROL = 0x2214;
|
|
//constexpr uint16_t VP_E3_CONTROL = 0x2216;
|
|
//constexpr uint16_t VP_E4_CONTROL = 0x2218;
|
|
//constexpr uint16_t VP_E5_CONTROL = 0x221A;
|
|
constexpr uint16_t VP_BED_CONTROL = 0x401C;
|
|
|
|
// Preheat
|
|
constexpr uint16_t VP_E0_BED_PREHEAT = 0x4020;
|
|
constexpr uint16_t VP_E1_BED_PREHEAT = 0x4022;
|
|
//constexpr uint16_t VP_E2_BED_PREHEAT = 0x4024;
|
|
//constexpr uint16_t VP_E3_BED_PREHEAT = 0x4026;
|
|
//constexpr uint16_t VP_E4_BED_PREHEAT = 0x4028;
|
|
//constexpr uint16_t VP_E5_BED_PREHEAT = 0x402A;
|
|
|
|
// Filament load and unload
|
|
// constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x4030;
|
|
// constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x4032;
|
|
|
|
// Settings store , reset
|
|
|
|
// Level data
|
|
constexpr uint16_t VP_Level_Point_One_X = 0x4100;
|
|
constexpr uint16_t VP_Level_Point_One_Y = 0x4102;
|
|
constexpr uint16_t VP_Level_Point_Two_X = 0x4104;
|
|
constexpr uint16_t VP_Level_Point_Two_Y = 0x4106;
|
|
constexpr uint16_t VP_Level_Point_Three_X = 0x4108;
|
|
constexpr uint16_t VP_Level_Point_Three_Y = 0x410A;
|
|
constexpr uint16_t VP_Level_Point_Four_X = 0x410C;
|
|
constexpr uint16_t VP_Level_Point_Four_Y = 0x410E;
|
|
constexpr uint16_t VP_Level_Point_Five_X = 0x4110;
|
|
constexpr uint16_t VP_Level_Point_Five_Y = 0x4112;
|
|
|
|
|
|
/* H43 Version */
|
|
constexpr uint16_t VP_MKS_H43_VERSION = 0x4A00; // MKS H43 V1.0.0
|
|
constexpr uint16_t VP_MKS_H43_VERSION_LEN = 16;
|
|
constexpr uint16_t VP_MKS_H43_UpdataVERSION = 0x4A10; // MKS H43 V1.0.0
|
|
constexpr uint16_t VP_MKS_H43_UpdataVERSION_LEN = 16;
|
|
|
|
/* -------------------------------0x5000-0xFFFF------------------------------- */
|
|
constexpr uint16_t VP_HOME_Dis = 0x5000;
|
|
constexpr uint16_t VP_Setting_Dis = 0x5010;
|
|
constexpr uint16_t VP_Tool_Dis = 0x5020;
|
|
constexpr uint16_t VP_Printing_Dis = 0x5030;
|
|
|
|
constexpr uint16_t VP_Language_Dis = 0x5080;
|
|
constexpr uint16_t VP_LossPoint_Dis = 0x5090;
|
|
|
|
constexpr uint16_t VP_PrintPauseConfig_Dis = 0x5120;
|
|
constexpr uint16_t VP_MotorPluse_Dis = 0x5140;
|
|
constexpr uint16_t VP_MotorMaxSpeed_Dis = 0x5150;
|
|
constexpr uint16_t VP_MotorMaxAcc_Dis = 0x5160;
|
|
|
|
constexpr uint16_t VP_X_Pluse_Dis = 0x5170;
|
|
constexpr uint16_t VP_Y_Pluse_Dis = 0x5180;
|
|
constexpr uint16_t VP_Z_Pluse_Dis = 0x5190;
|
|
constexpr uint16_t VP_E0_Pluse_Dis = 0x51A0;
|
|
constexpr uint16_t VP_E1_Pluse_Dis = 0x51B0;
|
|
|
|
constexpr uint16_t VP_X_Max_Speed_Dis = 0x5280;
|
|
constexpr uint16_t VP_Y_Max_Speed_Dis = 0x5290;
|
|
constexpr uint16_t VP_Z_Max_Speed_Dis = 0x52A0;
|
|
constexpr uint16_t VP_E0_Max_Speed_Dis = 0x52B0;
|
|
constexpr uint16_t VP_E1_Max_Speed_Dis = 0x52C0;
|
|
|
|
constexpr uint16_t VP_X_Max_Acc_Speed_Dis = 0x51E0;
|
|
constexpr uint16_t VP_Y_Max_Acc_Speed_Dis = 0x51F0;
|
|
constexpr uint16_t VP_Z_Max_Acc_Speed_Dis = 0x5200;
|
|
constexpr uint16_t VP_E0_Max_Acc_Speed_Dis = 0x5210;
|
|
constexpr uint16_t VP_E1_Max_Acc_Speed_Dis = 0x5220;
|
|
|
|
|
|
constexpr uint16_t VP_PrintTime_Dis = 0x5470;
|
|
constexpr uint16_t VP_E0_Temp_Dis = 0x5310;
|
|
constexpr uint16_t VP_E1_Temp_Dis = 0x5320;
|
|
constexpr uint16_t VP_HB_Temp_Dis = 0x5330;
|
|
constexpr uint16_t VP_Feedrate_Dis = 0x5350;
|
|
constexpr uint16_t VP_PrintAcc_Dis = 0x5340;
|
|
constexpr uint16_t VP_Fan_Speed_Dis = 0x5360;
|
|
|
|
constexpr uint16_t VP_Min_Ex_Temp_Dis = 0x5380;
|
|
|
|
|
|
constexpr uint16_t VP_X_PARK_POS_Dis = 0x53E0;
|
|
constexpr uint16_t VP_Y_PARK_POS_Dis = 0x53F0;
|
|
constexpr uint16_t VP_Z_PARK_POS_Dis = 0x5400;
|
|
|
|
|
|
constexpr uint16_t VP_TravelAcc_Dis = 0x5440;
|
|
constexpr uint16_t VP_FeedRateMin_Dis = 0x5450;
|
|
constexpr uint16_t VP_TravelFeeRateMin_Dis = 0x5460;
|
|
constexpr uint16_t VP_ACC_Dis = 0x5480;
|
|
|
|
constexpr uint16_t VP_Extrusion_Dis = 0x5230;
|
|
constexpr uint16_t VP_HeatBed_Dis = 0x5240;
|
|
|
|
constexpr uint16_t VP_Printting_Dis = 0x5430;
|
|
constexpr uint16_t VP_FactoryDefaults_Dis = 0x54C0;
|
|
constexpr uint16_t VP_StoreSetting_Dis = 0x54B0;
|
|
constexpr uint16_t VP_Info_EEPROM_2_Dis = 0x54D0;
|
|
constexpr uint16_t VP_Info_EEPROM_1_Dis = 0x54E0;
|
|
|
|
constexpr uint16_t VP_AutoLevel_1_Dis = 0x55F0;
|
|
|
|
constexpr uint16_t VP_TMC_X_Step_Dis = 0x5530;
|
|
constexpr uint16_t VP_TMC_Y_Step_Dis = 0x5540;
|
|
constexpr uint16_t VP_TMC_Z_Step_Dis = 0x5550;
|
|
constexpr uint16_t VP_TMC_X1_Current_Dis = 0x5560;
|
|
constexpr uint16_t VP_TMC_Y1_Current_Dis = 0x5570;
|
|
constexpr uint16_t VP_TMC_X_Current_Dis = 0x5580;
|
|
constexpr uint16_t VP_TMC_Y_Current_Dis = 0x5590;
|
|
constexpr uint16_t VP_TMC_Z_Current_Dis = 0x55A0;
|
|
constexpr uint16_t VP_TMC_E0_Current_Dis = 0x55B0;
|
|
constexpr uint16_t VP_TMC_E1_Current_Dis = 0x55C0;
|
|
constexpr uint16_t VP_TMC_Z1_Current_Dis = 0x55E0;
|
|
|
|
constexpr uint16_t VP_AutoLEVEL_INFO1 = 0x5600;
|
|
constexpr uint16_t VP_EX_TEMP_INFO1_Dis = 0x5610;
|
|
constexpr uint16_t VP_EX_TEMP_INFO2_Dis = 0x5620;
|
|
constexpr uint16_t VP_EX_TEMP_INFO3_Dis = 0x5630;
|
|
constexpr uint16_t VP_LCD_BLK_Dis = 0x56A0;
|
|
constexpr uint16_t VP_Info_PrinfFinsh_1_Dis = 0x5C00;
|
|
constexpr uint16_t VP_Info_PrinfFinsh_2_Dis = 0x5C10;
|
|
|
|
constexpr uint16_t VP_Length_Dis = 0x5B00;
|
|
|
|
constexpr uint16_t VP_PrintConfrim_Info_Dis = 0x5B90;
|
|
constexpr uint16_t VP_StopPrintConfrim_Info_Dis = 0x5B80;
|
|
|
|
constexpr uint16_t VP_Point_One_Dis = 0x5BA0;
|
|
constexpr uint16_t VP_Point_Two_Dis = 0x5BB0;
|
|
constexpr uint16_t VP_Point_Three_Dis = 0x5BC0;
|
|
constexpr uint16_t VP_Point_Four_Dis = 0x5BD0;
|
|
constexpr uint16_t VP_Point_Five_Dis = 0x5BE0;
|
|
|
|
constexpr uint16_t VP_Print_Dis = 0x5250;
|
|
|
|
constexpr uint16_t VP_About_Dis = 0x5A00;
|
|
constexpr uint16_t VP_Config_Dis = 0x5A10;
|
|
constexpr uint16_t VP_Filament_Dis = 0x5A20;
|
|
constexpr uint16_t VP_Move_Dis = 0x5A30;
|
|
constexpr uint16_t VP_Level_Dis = 0x5A50;
|
|
constexpr uint16_t VP_Speed_Dis = 0x5A70;
|
|
constexpr uint16_t VP_InOut_Dis = 0x5A80;
|
|
|
|
constexpr uint16_t VP_MotorConfig_Dis = 0x5100;
|
|
constexpr uint16_t VP_LevelConfig_Dis = 0x5110;
|
|
constexpr uint16_t VP_Advance_Dis = 0x5130;
|
|
constexpr uint16_t VP_TemperatureConfig_Dis = 0x5390;
|
|
|
|
#endif // MKS_FINSH
|