158 lines
5.5 KiB
C
158 lines
5.5 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* ANYCUBIC Trigorilla Pro (STM32F130ZET6) board pin assignments.
|
|
* It is the same used by the Tronxy X5SA thanks to ftoz1 for sharing it
|
|
* https://github.com/MarlinFirmware/Marlin/issues/14655
|
|
* https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf
|
|
*/
|
|
|
|
#ifndef __STM32F1__
|
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
|
#elif HOTENDS > 2 || E_STEPPERS > 2
|
|
#error "Trigorilla Pro supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
|
#endif
|
|
|
|
#define BOARD_INFO_NAME "Trigorilla Pro"
|
|
#define DISABLE_JTAG
|
|
|
|
//
|
|
// EEPROM
|
|
//
|
|
#define FLASH_EEPROM_EMULATION
|
|
#if ENABLED(FLASH_EEPROM_EMULATION)
|
|
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
|
|
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
|
|
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
|
|
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
|
|
#else
|
|
#define MARLIN_EEPROM_SIZE (0x800U) // On SD, Limit to 2KB, require this amount of RAM
|
|
#endif
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MAX_PIN PG10
|
|
#define Y_MAX_PIN PA12
|
|
#define Z_MAX_PIN PA14
|
|
#define Z_MIN_PIN PA13
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_ENABLE_PIN PC13
|
|
#define X_STEP_PIN PE5
|
|
#define X_DIR_PIN PE6
|
|
|
|
#define Y_ENABLE_PIN PE4
|
|
#define Y_STEP_PIN PE2
|
|
#define Y_DIR_PIN PE3
|
|
|
|
#define Z_ENABLE_PIN PE1
|
|
#define Z_STEP_PIN PB9
|
|
#define Z_DIR_PIN PE0
|
|
|
|
#define E0_ENABLE_PIN PB8
|
|
#define E0_STEP_PIN PB4
|
|
#define E0_DIR_PIN PB5
|
|
|
|
#define E1_ENABLE_PIN PG8
|
|
#define E1_STEP_PIN PC7
|
|
#define E1_DIR_PIN PC6
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN PA1 // TH1
|
|
#define TEMP_BED_PIN PA0 // TB1
|
|
|
|
//
|
|
// Heaters
|
|
//
|
|
#define HEATER_0_PIN PG12 // HEATER1
|
|
#define HEATER_BED_PIN PG11 // HOT BED
|
|
#define HEATER_BED_INVERTING true
|
|
|
|
//
|
|
// Fans
|
|
//
|
|
#define CONTROLLER_FAN_PIN PD6 // FAN
|
|
#define FAN_PIN PG13 // FAN
|
|
#define FAN1_PIN PG14 // FAN
|
|
|
|
//
|
|
// Misc
|
|
//
|
|
#define BEEPER_PIN PB0
|
|
#define LED_PIN PD3
|
|
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
|
|
#define FIL_RUNOUT_PIN PA15 // MT_DET
|
|
|
|
/**
|
|
* Note: MKS Robin TFT screens use various TFT controllers
|
|
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
|
|
* ILI9488 is not supported.
|
|
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
|
|
*
|
|
* If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader init the screen.
|
|
*
|
|
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
|
|
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
|
|
*/
|
|
#define LCD_RESET_PIN PF11
|
|
#define LCD_BACKLIGHT_PIN PD13
|
|
#define FSMC_CS_PIN PD7 // NE4
|
|
#define FSMC_RS_PIN PD11 // A0
|
|
|
|
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
|
#define FSMC_DMA_DEV DMA2
|
|
#define FSMC_DMA_CHANNEL DMA_CH5
|
|
|
|
#if NEED_TOUCH_PINS
|
|
#define TOUCH_CS_PIN PB7 // SPI2_NSS
|
|
#define TOUCH_SCK_PIN PA5 // SPI2_SCK
|
|
#define TOUCH_MISO_PIN PA6 // SPI2_MISO
|
|
#define TOUCH_MOSI_PIN PA7 // SPI2_MOSI
|
|
#endif
|
|
|
|
// SPI1(PA7) & SPI3(PB5) not available
|
|
#define ENABLE_SPI2
|
|
|
|
#if ENABLED(SDIO_SUPPORT)
|
|
#define SCK_PIN PB13 // SPI2 ok
|
|
#define MISO_PIN PB14 // SPI2 ok
|
|
#define MOSI_PIN PB15 // SPI2 ok
|
|
#define SS_PIN PC11 // PB12 is X- ok
|
|
#define SD_DETECT_PIN -1 // SD_CD ok
|
|
#else
|
|
// SD as custom software SPI (SDIO pins)
|
|
#define SCK_PIN PC12
|
|
#define MISO_PIN PC8
|
|
#define MOSI_PIN PD2
|
|
#define SS_PIN -1
|
|
#define ONBOARD_SD_CS_PIN PC11
|
|
#define SDSS PD2
|
|
#define SD_DETECT_PIN -1
|
|
#endif
|