![Filip Mulier](/assets/img/avatar_default.png)
Improvement to avoid reinitializing delay buffer with every print. Fixed issues in buffer indexing and memory out of bounds due to floating point imprecision. Simplified the code by avoiding conversion to standard diameter and 1cu mm extrusion, which caused complications in determining mm extruded.
1061 lines
40 KiB
C++
1061 lines
40 KiB
C++
/*
|
|
planner.c - buffers movement commands and manages the acceleration profile plan
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* The ring buffer implementation gleaned from the wiring_serial library by David A. Mellis. */
|
|
|
|
/*
|
|
Reasoning behind the mathematics in this module (in the key of 'Mathematica'):
|
|
|
|
s == speed, a == acceleration, t == time, d == distance
|
|
|
|
Basic definitions:
|
|
|
|
Speed[s_, a_, t_] := s + (a*t)
|
|
Travel[s_, a_, t_] := Integrate[Speed[s, a, t], t]
|
|
|
|
Distance to reach a specific speed with a constant acceleration:
|
|
|
|
Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, d, t]
|
|
d -> (m^2 - s^2)/(2 a) --> estimate_acceleration_distance()
|
|
|
|
Speed after a given distance of travel with constant acceleration:
|
|
|
|
Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, m, t]
|
|
m -> Sqrt[2 a d + s^2]
|
|
|
|
DestinationSpeed[s_, a_, d_] := Sqrt[2 a d + s^2]
|
|
|
|
When to start braking (di) to reach a specified destionation speed (s2) after accelerating
|
|
from initial speed s1 without ever stopping at a plateau:
|
|
|
|
Solve[{DestinationSpeed[s1, a, di] == DestinationSpeed[s2, a, d - di]}, di]
|
|
di -> (2 a d - s1^2 + s2^2)/(4 a) --> intersection_distance()
|
|
|
|
IntersectionDistance[s1_, s2_, a_, d_] := (2 a d - s1^2 + s2^2)/(4 a)
|
|
*/
|
|
|
|
#include "Marlin.h"
|
|
#include "planner.h"
|
|
#include "stepper.h"
|
|
#include "temperature.h"
|
|
#include "ultralcd.h"
|
|
#include "language.h"
|
|
|
|
//===========================================================================
|
|
//=============================public variables ============================
|
|
//===========================================================================
|
|
|
|
unsigned long minsegmenttime;
|
|
float max_feedrate[4]; // set the max speeds
|
|
float axis_steps_per_unit[4];
|
|
unsigned long max_acceleration_units_per_sq_second[4]; // Use M201 to override by software
|
|
float minimumfeedrate;
|
|
float acceleration; // Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX
|
|
float retract_acceleration; // mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX
|
|
float max_xy_jerk; //speed than can be stopped at once, if i understand correctly.
|
|
float max_z_jerk;
|
|
float max_e_jerk;
|
|
float mintravelfeedrate;
|
|
unsigned long axis_steps_per_sqr_second[NUM_AXIS];
|
|
|
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
|
// this holds the required transform to compensate for bed level
|
|
matrix_3x3 plan_bed_level_matrix = {
|
|
1.0, 0.0, 0.0,
|
|
0.0, 1.0, 0.0,
|
|
0.0, 0.0, 1.0,
|
|
};
|
|
#endif // #ifdef ENABLE_AUTO_BED_LEVELING
|
|
|
|
// The current position of the tool in absolute steps
|
|
long position[4]; //rescaled from extern when axis_steps_per_unit are changed by gcode
|
|
static float previous_speed[4]; // Speed of previous path line segment
|
|
static float previous_nominal_speed; // Nominal speed of previous path line segment
|
|
|
|
#ifdef AUTOTEMP
|
|
float autotemp_max=250;
|
|
float autotemp_min=210;
|
|
float autotemp_factor=0.1;
|
|
bool autotemp_enabled=false;
|
|
#endif
|
|
|
|
//===========================================================================
|
|
//=================semi-private variables, used in inline functions =====
|
|
//===========================================================================
|
|
block_t block_buffer[BLOCK_BUFFER_SIZE]; // A ring buffer for motion instfructions
|
|
volatile unsigned char block_buffer_head; // Index of the next block to be pushed
|
|
volatile unsigned char block_buffer_tail; // Index of the block to process now
|
|
|
|
//===========================================================================
|
|
//=============================private variables ============================
|
|
//===========================================================================
|
|
#ifdef PREVENT_DANGEROUS_EXTRUDE
|
|
float extrude_min_temp=EXTRUDE_MINTEMP;
|
|
#endif
|
|
#ifdef XY_FREQUENCY_LIMIT
|
|
#define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT)
|
|
// Used for the frequency limit
|
|
static unsigned char old_direction_bits = 0; // Old direction bits. Used for speed calculations
|
|
static long x_segment_time[3]={MAX_FREQ_TIME + 1,0,0}; // Segment times (in us). Used for speed calculations
|
|
static long y_segment_time[3]={MAX_FREQ_TIME + 1,0,0};
|
|
#endif
|
|
|
|
#ifdef FILAMENT_SENSOR
|
|
static char meas_sample; //temporary variable to hold filament measurement sample
|
|
#endif
|
|
|
|
// Returns the index of the next block in the ring buffer
|
|
// NOTE: Removed modulo (%) operator, which uses an expensive divide and multiplication.
|
|
static int8_t next_block_index(int8_t block_index) {
|
|
block_index++;
|
|
if (block_index == BLOCK_BUFFER_SIZE) {
|
|
block_index = 0;
|
|
}
|
|
return(block_index);
|
|
}
|
|
|
|
|
|
// Returns the index of the previous block in the ring buffer
|
|
static int8_t prev_block_index(int8_t block_index) {
|
|
if (block_index == 0) {
|
|
block_index = BLOCK_BUFFER_SIZE;
|
|
}
|
|
block_index--;
|
|
return(block_index);
|
|
}
|
|
|
|
//===========================================================================
|
|
//=============================functions ============================
|
|
//===========================================================================
|
|
|
|
// Calculates the distance (not time) it takes to accelerate from initial_rate to target_rate using the
|
|
// given acceleration:
|
|
FORCE_INLINE float estimate_acceleration_distance(float initial_rate, float target_rate, float acceleration)
|
|
{
|
|
if (acceleration!=0) {
|
|
return((target_rate*target_rate-initial_rate*initial_rate)/
|
|
(2.0*acceleration));
|
|
}
|
|
else {
|
|
return 0.0; // acceleration was 0, set acceleration distance to 0
|
|
}
|
|
}
|
|
|
|
// This function gives you the point at which you must start braking (at the rate of -acceleration) if
|
|
// you started at speed initial_rate and accelerated until this point and want to end at the final_rate after
|
|
// a total travel of distance. This can be used to compute the intersection point between acceleration and
|
|
// deceleration in the cases where the trapezoid has no plateau (i.e. never reaches maximum speed)
|
|
|
|
FORCE_INLINE float intersection_distance(float initial_rate, float final_rate, float acceleration, float distance)
|
|
{
|
|
if (acceleration!=0) {
|
|
return((2.0*acceleration*distance-initial_rate*initial_rate+final_rate*final_rate)/
|
|
(4.0*acceleration) );
|
|
}
|
|
else {
|
|
return 0.0; // acceleration was 0, set intersection distance to 0
|
|
}
|
|
}
|
|
|
|
// Calculates trapezoid parameters so that the entry- and exit-speed is compensated by the provided factors.
|
|
|
|
void calculate_trapezoid_for_block(block_t *block, float entry_factor, float exit_factor) {
|
|
unsigned long initial_rate = ceil(block->nominal_rate*entry_factor); // (step/min)
|
|
unsigned long final_rate = ceil(block->nominal_rate*exit_factor); // (step/min)
|
|
|
|
// Limit minimal step rate (Otherwise the timer will overflow.)
|
|
if(initial_rate <120) {
|
|
initial_rate=120;
|
|
}
|
|
if(final_rate < 120) {
|
|
final_rate=120;
|
|
}
|
|
|
|
long acceleration = block->acceleration_st;
|
|
int32_t accelerate_steps =
|
|
ceil(estimate_acceleration_distance(initial_rate, block->nominal_rate, acceleration));
|
|
int32_t decelerate_steps =
|
|
floor(estimate_acceleration_distance(block->nominal_rate, final_rate, -acceleration));
|
|
|
|
// Calculate the size of Plateau of Nominal Rate.
|
|
int32_t plateau_steps = block->step_event_count-accelerate_steps-decelerate_steps;
|
|
|
|
// Is the Plateau of Nominal Rate smaller than nothing? That means no cruising, and we will
|
|
// have to use intersection_distance() to calculate when to abort acceleration and start braking
|
|
// in order to reach the final_rate exactly at the end of this block.
|
|
if (plateau_steps < 0) {
|
|
accelerate_steps = ceil(intersection_distance(initial_rate, final_rate, acceleration, block->step_event_count));
|
|
accelerate_steps = max(accelerate_steps,0); // Check limits due to numerical round-off
|
|
accelerate_steps = min((uint32_t)accelerate_steps,block->step_event_count);//(We can cast here to unsigned, because the above line ensures that we are above zero)
|
|
plateau_steps = 0;
|
|
}
|
|
|
|
#ifdef ADVANCE
|
|
volatile long initial_advance = block->advance*entry_factor*entry_factor;
|
|
volatile long final_advance = block->advance*exit_factor*exit_factor;
|
|
#endif // ADVANCE
|
|
|
|
// block->accelerate_until = accelerate_steps;
|
|
// block->decelerate_after = accelerate_steps+plateau_steps;
|
|
CRITICAL_SECTION_START; // Fill variables used by the stepper in a critical section
|
|
if(block->busy == false) { // Don't update variables if block is busy.
|
|
block->accelerate_until = accelerate_steps;
|
|
block->decelerate_after = accelerate_steps+plateau_steps;
|
|
block->initial_rate = initial_rate;
|
|
block->final_rate = final_rate;
|
|
#ifdef ADVANCE
|
|
block->initial_advance = initial_advance;
|
|
block->final_advance = final_advance;
|
|
#endif //ADVANCE
|
|
}
|
|
CRITICAL_SECTION_END;
|
|
}
|
|
|
|
// Calculates the maximum allowable speed at this point when you must be able to reach target_velocity using the
|
|
// acceleration within the allotted distance.
|
|
FORCE_INLINE float max_allowable_speed(float acceleration, float target_velocity, float distance) {
|
|
return sqrt(target_velocity*target_velocity-2*acceleration*distance);
|
|
}
|
|
|
|
// "Junction jerk" in this context is the immediate change in speed at the junction of two blocks.
|
|
// This method will calculate the junction jerk as the euclidean distance between the nominal
|
|
// velocities of the respective blocks.
|
|
//inline float junction_jerk(block_t *before, block_t *after) {
|
|
// return sqrt(
|
|
// pow((before->speed_x-after->speed_x), 2)+pow((before->speed_y-after->speed_y), 2));
|
|
//}
|
|
|
|
|
|
// The kernel called by planner_recalculate() when scanning the plan from last to first entry.
|
|
void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *next) {
|
|
if(!current) {
|
|
return;
|
|
}
|
|
|
|
if (next) {
|
|
// If entry speed is already at the maximum entry speed, no need to recheck. Block is cruising.
|
|
// If not, block in state of acceleration or deceleration. Reset entry speed to maximum and
|
|
// check for maximum allowable speed reductions to ensure maximum possible planned speed.
|
|
if (current->entry_speed != current->max_entry_speed) {
|
|
|
|
// If nominal length true, max junction speed is guaranteed to be reached. Only compute
|
|
// for max allowable speed if block is decelerating and nominal length is false.
|
|
if ((!current->nominal_length_flag) && (current->max_entry_speed > next->entry_speed)) {
|
|
current->entry_speed = min( current->max_entry_speed,
|
|
max_allowable_speed(-current->acceleration,next->entry_speed,current->millimeters));
|
|
}
|
|
else {
|
|
current->entry_speed = current->max_entry_speed;
|
|
}
|
|
current->recalculate_flag = true;
|
|
|
|
}
|
|
} // Skip last block. Already initialized and set for recalculation.
|
|
}
|
|
|
|
// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This
|
|
// implements the reverse pass.
|
|
void planner_reverse_pass() {
|
|
uint8_t block_index = block_buffer_head;
|
|
|
|
//Make a local copy of block_buffer_tail, because the interrupt can alter it
|
|
CRITICAL_SECTION_START;
|
|
unsigned char tail = block_buffer_tail;
|
|
CRITICAL_SECTION_END
|
|
|
|
if(((block_buffer_head-tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1)) > 3) {
|
|
block_index = (block_buffer_head - 3) & (BLOCK_BUFFER_SIZE - 1);
|
|
block_t *block[3] = {
|
|
NULL, NULL, NULL };
|
|
while(block_index != tail) {
|
|
block_index = prev_block_index(block_index);
|
|
block[2]= block[1];
|
|
block[1]= block[0];
|
|
block[0] = &block_buffer[block_index];
|
|
planner_reverse_pass_kernel(block[0], block[1], block[2]);
|
|
}
|
|
}
|
|
}
|
|
|
|
// The kernel called by planner_recalculate() when scanning the plan from first to last entry.
|
|
void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *next) {
|
|
if(!previous) {
|
|
return;
|
|
}
|
|
|
|
// If the previous block is an acceleration block, but it is not long enough to complete the
|
|
// full speed change within the block, we need to adjust the entry speed accordingly. Entry
|
|
// speeds have already been reset, maximized, and reverse planned by reverse planner.
|
|
// If nominal length is true, max junction speed is guaranteed to be reached. No need to recheck.
|
|
if (!previous->nominal_length_flag) {
|
|
if (previous->entry_speed < current->entry_speed) {
|
|
double entry_speed = min( current->entry_speed,
|
|
max_allowable_speed(-previous->acceleration,previous->entry_speed,previous->millimeters) );
|
|
|
|
// Check for junction speed change
|
|
if (current->entry_speed != entry_speed) {
|
|
current->entry_speed = entry_speed;
|
|
current->recalculate_flag = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This
|
|
// implements the forward pass.
|
|
void planner_forward_pass() {
|
|
uint8_t block_index = block_buffer_tail;
|
|
block_t *block[3] = {
|
|
NULL, NULL, NULL };
|
|
|
|
while(block_index != block_buffer_head) {
|
|
block[0] = block[1];
|
|
block[1] = block[2];
|
|
block[2] = &block_buffer[block_index];
|
|
planner_forward_pass_kernel(block[0],block[1],block[2]);
|
|
block_index = next_block_index(block_index);
|
|
}
|
|
planner_forward_pass_kernel(block[1], block[2], NULL);
|
|
}
|
|
|
|
// Recalculates the trapezoid speed profiles for all blocks in the plan according to the
|
|
// entry_factor for each junction. Must be called by planner_recalculate() after
|
|
// updating the blocks.
|
|
void planner_recalculate_trapezoids() {
|
|
int8_t block_index = block_buffer_tail;
|
|
block_t *current;
|
|
block_t *next = NULL;
|
|
|
|
while(block_index != block_buffer_head) {
|
|
current = next;
|
|
next = &block_buffer[block_index];
|
|
if (current) {
|
|
// Recalculate if current block entry or exit junction speed has changed.
|
|
if (current->recalculate_flag || next->recalculate_flag) {
|
|
// NOTE: Entry and exit factors always > 0 by all previous logic operations.
|
|
calculate_trapezoid_for_block(current, current->entry_speed/current->nominal_speed,
|
|
next->entry_speed/current->nominal_speed);
|
|
current->recalculate_flag = false; // Reset current only to ensure next trapezoid is computed
|
|
}
|
|
}
|
|
block_index = next_block_index( block_index );
|
|
}
|
|
// Last/newest block in buffer. Exit speed is set with MINIMUM_PLANNER_SPEED. Always recalculated.
|
|
if(next != NULL) {
|
|
calculate_trapezoid_for_block(next, next->entry_speed/next->nominal_speed,
|
|
MINIMUM_PLANNER_SPEED/next->nominal_speed);
|
|
next->recalculate_flag = false;
|
|
}
|
|
}
|
|
|
|
// Recalculates the motion plan according to the following algorithm:
|
|
//
|
|
// 1. Go over every block in reverse order and calculate a junction speed reduction (i.e. block_t.entry_factor)
|
|
// so that:
|
|
// a. The junction jerk is within the set limit
|
|
// b. No speed reduction within one block requires faster deceleration than the one, true constant
|
|
// acceleration.
|
|
// 2. Go over every block in chronological order and dial down junction speed reduction values if
|
|
// a. The speed increase within one block would require faster accelleration than the one, true
|
|
// constant acceleration.
|
|
//
|
|
// When these stages are complete all blocks have an entry_factor that will allow all speed changes to
|
|
// be performed using only the one, true constant acceleration, and where no junction jerk is jerkier than
|
|
// the set limit. Finally it will:
|
|
//
|
|
// 3. Recalculate trapezoids for all blocks.
|
|
|
|
void planner_recalculate() {
|
|
planner_reverse_pass();
|
|
planner_forward_pass();
|
|
planner_recalculate_trapezoids();
|
|
}
|
|
|
|
void plan_init() {
|
|
block_buffer_head = 0;
|
|
block_buffer_tail = 0;
|
|
memset(position, 0, sizeof(position)); // clear position
|
|
previous_speed[0] = 0.0;
|
|
previous_speed[1] = 0.0;
|
|
previous_speed[2] = 0.0;
|
|
previous_speed[3] = 0.0;
|
|
previous_nominal_speed = 0.0;
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifdef AUTOTEMP
|
|
void getHighESpeed()
|
|
{
|
|
static float oldt=0;
|
|
if(!autotemp_enabled){
|
|
return;
|
|
}
|
|
if(degTargetHotend0()+2<autotemp_min) { //probably temperature set to zero.
|
|
return; //do nothing
|
|
}
|
|
|
|
float high=0.0;
|
|
uint8_t block_index = block_buffer_tail;
|
|
|
|
while(block_index != block_buffer_head) {
|
|
if((block_buffer[block_index].steps_x != 0) ||
|
|
(block_buffer[block_index].steps_y != 0) ||
|
|
(block_buffer[block_index].steps_z != 0)) {
|
|
float se=(float(block_buffer[block_index].steps_e)/float(block_buffer[block_index].step_event_count))*block_buffer[block_index].nominal_speed;
|
|
//se; mm/sec;
|
|
if(se>high)
|
|
{
|
|
high=se;
|
|
}
|
|
}
|
|
block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1);
|
|
}
|
|
|
|
float g=autotemp_min+high*autotemp_factor;
|
|
float t=g;
|
|
if(t<autotemp_min)
|
|
t=autotemp_min;
|
|
if(t>autotemp_max)
|
|
t=autotemp_max;
|
|
if(oldt>t)
|
|
{
|
|
t=AUTOTEMP_OLDWEIGHT*oldt+(1-AUTOTEMP_OLDWEIGHT)*t;
|
|
}
|
|
oldt=t;
|
|
setTargetHotend0(t);
|
|
}
|
|
#endif
|
|
|
|
void check_axes_activity()
|
|
{
|
|
unsigned char x_active = 0;
|
|
unsigned char y_active = 0;
|
|
unsigned char z_active = 0;
|
|
unsigned char e_active = 0;
|
|
unsigned char tail_fan_speed = fanSpeed;
|
|
#ifdef BARICUDA
|
|
unsigned char tail_valve_pressure = ValvePressure;
|
|
unsigned char tail_e_to_p_pressure = EtoPPressure;
|
|
#endif
|
|
block_t *block;
|
|
|
|
if(block_buffer_tail != block_buffer_head)
|
|
{
|
|
uint8_t block_index = block_buffer_tail;
|
|
tail_fan_speed = block_buffer[block_index].fan_speed;
|
|
#ifdef BARICUDA
|
|
tail_valve_pressure = block_buffer[block_index].valve_pressure;
|
|
tail_e_to_p_pressure = block_buffer[block_index].e_to_p_pressure;
|
|
#endif
|
|
while(block_index != block_buffer_head)
|
|
{
|
|
block = &block_buffer[block_index];
|
|
if(block->steps_x != 0) x_active++;
|
|
if(block->steps_y != 0) y_active++;
|
|
if(block->steps_z != 0) z_active++;
|
|
if(block->steps_e != 0) e_active++;
|
|
block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1);
|
|
}
|
|
}
|
|
if((DISABLE_X) && (x_active == 0)) disable_x();
|
|
if((DISABLE_Y) && (y_active == 0)) disable_y();
|
|
if((DISABLE_Z) && (z_active == 0)) disable_z();
|
|
if((DISABLE_E) && (e_active == 0))
|
|
{
|
|
disable_e0();
|
|
disable_e1();
|
|
disable_e2();
|
|
}
|
|
#if defined(FAN_PIN) && FAN_PIN > -1
|
|
#ifdef FAN_KICKSTART_TIME
|
|
static unsigned long fan_kick_end;
|
|
if (tail_fan_speed) {
|
|
if (fan_kick_end == 0) {
|
|
// Just starting up fan - run at full power.
|
|
fan_kick_end = millis() + FAN_KICKSTART_TIME;
|
|
tail_fan_speed = 255;
|
|
} else if (fan_kick_end > millis())
|
|
// Fan still spinning up.
|
|
tail_fan_speed = 255;
|
|
} else {
|
|
fan_kick_end = 0;
|
|
}
|
|
#endif//FAN_KICKSTART_TIME
|
|
#ifdef FAN_SOFT_PWM
|
|
fanSpeedSoftPwm = tail_fan_speed;
|
|
#else
|
|
analogWrite(FAN_PIN,tail_fan_speed);
|
|
#endif//!FAN_SOFT_PWM
|
|
#endif//FAN_PIN > -1
|
|
#ifdef AUTOTEMP
|
|
getHighESpeed();
|
|
#endif
|
|
|
|
#ifdef BARICUDA
|
|
#if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
|
|
analogWrite(HEATER_1_PIN,tail_valve_pressure);
|
|
#endif
|
|
|
|
#if defined(HEATER_2_PIN) && HEATER_2_PIN > -1
|
|
analogWrite(HEATER_2_PIN,tail_e_to_p_pressure);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
|
|
float junction_deviation = 0.1;
|
|
// Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in
|
|
// mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration
|
|
// calculation the caller must also provide the physical length of the line in millimeters.
|
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
|
void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, const uint8_t &extruder)
|
|
#else
|
|
void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder)
|
|
#endif //ENABLE_AUTO_BED_LEVELING
|
|
{
|
|
// Calculate the buffer head after we push this byte
|
|
int next_buffer_head = next_block_index(block_buffer_head);
|
|
|
|
// If the buffer is full: good! That means we are well ahead of the robot.
|
|
// Rest here until there is room in the buffer.
|
|
while(block_buffer_tail == next_buffer_head)
|
|
{
|
|
manage_heater();
|
|
manage_inactivity();
|
|
lcd_update();
|
|
}
|
|
|
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
|
apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
|
|
#endif // ENABLE_AUTO_BED_LEVELING
|
|
|
|
// The target position of the tool in absolute steps
|
|
// Calculate target position in absolute steps
|
|
//this should be done after the wait, because otherwise a M92 code within the gcode disrupts this calculation somehow
|
|
long target[4];
|
|
target[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]);
|
|
target[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]);
|
|
target[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]);
|
|
target[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]);
|
|
|
|
#ifdef PREVENT_DANGEROUS_EXTRUDE
|
|
if(target[E_AXIS]!=position[E_AXIS])
|
|
{
|
|
if(degHotend(active_extruder)<extrude_min_temp)
|
|
{
|
|
position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
|
|
}
|
|
|
|
#ifdef PREVENT_LENGTHY_EXTRUDE
|
|
if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH)
|
|
{
|
|
position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
// Prepare to set up new block
|
|
block_t *block = &block_buffer[block_buffer_head];
|
|
|
|
// Mark block as not busy (Not executed by the stepper interrupt)
|
|
block->busy = false;
|
|
|
|
// Number of steps for each axis
|
|
#ifndef COREXY
|
|
// default non-h-bot planning
|
|
block->steps_x = labs(target[X_AXIS]-position[X_AXIS]);
|
|
block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]);
|
|
#else
|
|
// corexy planning
|
|
// these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html
|
|
block->steps_x = labs((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]));
|
|
block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]));
|
|
#endif
|
|
block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]);
|
|
block->steps_e = labs(target[E_AXIS]-position[E_AXIS]);
|
|
block->steps_e *= volumetric_multiplier[active_extruder];
|
|
block->steps_e *= extrudemultiply;
|
|
block->steps_e /= 100;
|
|
block->step_event_count = max(block->steps_x, max(block->steps_y, max(block->steps_z, block->steps_e)));
|
|
|
|
// Bail if this is a zero-length block
|
|
if (block->step_event_count <= dropsegments)
|
|
{
|
|
return;
|
|
}
|
|
|
|
block->fan_speed = fanSpeed;
|
|
#ifdef BARICUDA
|
|
block->valve_pressure = ValvePressure;
|
|
block->e_to_p_pressure = EtoPPressure;
|
|
#endif
|
|
|
|
// Compute direction bits for this block
|
|
block->direction_bits = 0;
|
|
#ifndef COREXY
|
|
if (target[X_AXIS] < position[X_AXIS])
|
|
{
|
|
block->direction_bits |= (1<<X_AXIS);
|
|
}
|
|
if (target[Y_AXIS] < position[Y_AXIS])
|
|
{
|
|
block->direction_bits |= (1<<Y_AXIS);
|
|
}
|
|
#else
|
|
if ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]) < 0)
|
|
{
|
|
block->direction_bits |= (1<<X_AXIS);
|
|
}
|
|
if ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]) < 0)
|
|
{
|
|
block->direction_bits |= (1<<Y_AXIS);
|
|
}
|
|
#endif
|
|
if (target[Z_AXIS] < position[Z_AXIS])
|
|
{
|
|
block->direction_bits |= (1<<Z_AXIS);
|
|
}
|
|
if (target[E_AXIS] < position[E_AXIS])
|
|
{
|
|
block->direction_bits |= (1<<E_AXIS);
|
|
}
|
|
|
|
block->active_extruder = extruder;
|
|
|
|
//enable active axes
|
|
#ifdef COREXY
|
|
if((block->steps_x != 0) || (block->steps_y != 0))
|
|
{
|
|
enable_x();
|
|
enable_y();
|
|
}
|
|
#else
|
|
if(block->steps_x != 0) enable_x();
|
|
if(block->steps_y != 0) enable_y();
|
|
#endif
|
|
#ifndef Z_LATE_ENABLE
|
|
if(block->steps_z != 0) enable_z();
|
|
#endif
|
|
|
|
// Enable extruder(s)
|
|
if(block->steps_e != 0)
|
|
{
|
|
if (DISABLE_INACTIVE_EXTRUDER) //enable only selected extruder
|
|
{
|
|
switch(extruder)
|
|
{
|
|
case 0: enable_e0(); disable_e1(); disable_e2(); break;
|
|
case 1: disable_e0(); enable_e1(); disable_e2(); break;
|
|
case 2: disable_e0(); disable_e1(); enable_e2(); break;
|
|
}
|
|
}
|
|
else //enable all
|
|
{
|
|
enable_e0();
|
|
enable_e1();
|
|
enable_e2();
|
|
}
|
|
}
|
|
|
|
if (block->steps_e == 0)
|
|
{
|
|
if(feed_rate<mintravelfeedrate) feed_rate=mintravelfeedrate;
|
|
}
|
|
else
|
|
{
|
|
if(feed_rate<minimumfeedrate) feed_rate=minimumfeedrate;
|
|
}
|
|
|
|
float delta_mm[4];
|
|
#ifndef COREXY
|
|
delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS];
|
|
delta_mm[Y_AXIS] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS];
|
|
#else
|
|
delta_mm[X_AXIS] = ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[X_AXIS];
|
|
delta_mm[Y_AXIS] = ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[Y_AXIS];
|
|
#endif
|
|
delta_mm[Z_AXIS] = (target[Z_AXIS]-position[Z_AXIS])/axis_steps_per_unit[Z_AXIS];
|
|
delta_mm[E_AXIS] = ((target[E_AXIS]-position[E_AXIS])/axis_steps_per_unit[E_AXIS])*volumetric_multiplier[active_extruder]*extrudemultiply/100.0;
|
|
if ( block->steps_x <=dropsegments && block->steps_y <=dropsegments && block->steps_z <=dropsegments )
|
|
{
|
|
block->millimeters = fabs(delta_mm[E_AXIS]);
|
|
}
|
|
else
|
|
{
|
|
block->millimeters = sqrt(square(delta_mm[X_AXIS]) + square(delta_mm[Y_AXIS]) + square(delta_mm[Z_AXIS]));
|
|
}
|
|
float inverse_millimeters = 1.0/block->millimeters; // Inverse millimeters to remove multiple divides
|
|
|
|
// Calculate speed in mm/second for each axis. No divide by zero due to previous checks.
|
|
float inverse_second = feed_rate * inverse_millimeters;
|
|
|
|
int moves_queued=(block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1);
|
|
|
|
// slow down when de buffer starts to empty, rather than wait at the corner for a buffer refill
|
|
#ifdef OLD_SLOWDOWN
|
|
if(moves_queued < (BLOCK_BUFFER_SIZE * 0.5) && moves_queued > 1)
|
|
feed_rate = feed_rate*moves_queued / (BLOCK_BUFFER_SIZE * 0.5);
|
|
#endif
|
|
|
|
#ifdef SLOWDOWN
|
|
// segment time im micro seconds
|
|
unsigned long segment_time = lround(1000000.0/inverse_second);
|
|
if ((moves_queued > 1) && (moves_queued < (BLOCK_BUFFER_SIZE * 0.5)))
|
|
{
|
|
if (segment_time < minsegmenttime)
|
|
{ // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more.
|
|
inverse_second=1000000.0/(segment_time+lround(2*(minsegmenttime-segment_time)/moves_queued));
|
|
#ifdef XY_FREQUENCY_LIMIT
|
|
segment_time = lround(1000000.0/inverse_second);
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
// END OF SLOW DOWN SECTION
|
|
|
|
|
|
block->nominal_speed = block->millimeters * inverse_second; // (mm/sec) Always > 0
|
|
block->nominal_rate = ceil(block->step_event_count * inverse_second); // (step/sec) Always > 0
|
|
|
|
#ifdef FILAMENT_SENSOR
|
|
//FMM update ring buffer used for delay with filament measurements
|
|
|
|
|
|
if((extruder==FILAMENT_SENSOR_EXTRUDER_NUM) && (delay_index2 > -1)) //only for extruder with filament sensor and if ring buffer is initialized
|
|
{
|
|
delay_dist = delay_dist + delta_mm[E_AXIS]; //increment counter with next move in e axis
|
|
|
|
while (delay_dist >= (10*(MAX_MEASUREMENT_DELAY+1))) //check if counter is over max buffer size in mm
|
|
delay_dist = delay_dist - 10*(MAX_MEASUREMENT_DELAY+1); //loop around the buffer
|
|
while (delay_dist<0)
|
|
delay_dist = delay_dist + 10*(MAX_MEASUREMENT_DELAY+1); //loop around the buffer
|
|
|
|
delay_index1=delay_dist/10.0; //calculate index
|
|
|
|
//ensure the number is within range of the array after converting from floating point
|
|
if(delay_index1<0)
|
|
delay_index1=0;
|
|
else if (delay_index1>MAX_MEASUREMENT_DELAY)
|
|
delay_index1=MAX_MEASUREMENT_DELAY;
|
|
|
|
if(delay_index1 != delay_index2) //moved index
|
|
{
|
|
meas_sample=widthFil_to_size_ratio()-100; //subtract off 100 to reduce magnitude - to store in a signed char
|
|
}
|
|
while( delay_index1 != delay_index2)
|
|
{
|
|
delay_index2 = delay_index2 + 1;
|
|
if(delay_index2>MAX_MEASUREMENT_DELAY)
|
|
delay_index2=delay_index2-(MAX_MEASUREMENT_DELAY+1); //loop around buffer when incrementing
|
|
if(delay_index2<0)
|
|
delay_index2=0;
|
|
else if (delay_index2>MAX_MEASUREMENT_DELAY)
|
|
delay_index2=MAX_MEASUREMENT_DELAY;
|
|
|
|
measurement_delay[delay_index2]=meas_sample;
|
|
}
|
|
|
|
|
|
}
|
|
#endif
|
|
|
|
|
|
// Calculate and limit speed in mm/sec for each axis
|
|
float current_speed[4];
|
|
float speed_factor = 1.0; //factor <=1 do decrease speed
|
|
for(int i=0; i < 4; i++)
|
|
{
|
|
current_speed[i] = delta_mm[i] * inverse_second;
|
|
if(fabs(current_speed[i]) > max_feedrate[i])
|
|
speed_factor = min(speed_factor, max_feedrate[i] / fabs(current_speed[i]));
|
|
}
|
|
|
|
// Max segement time in us.
|
|
#ifdef XY_FREQUENCY_LIMIT
|
|
#define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT)
|
|
// Check and limit the xy direction change frequency
|
|
unsigned char direction_change = block->direction_bits ^ old_direction_bits;
|
|
old_direction_bits = block->direction_bits;
|
|
segment_time = lround((float)segment_time / speed_factor);
|
|
|
|
if((direction_change & (1<<X_AXIS)) == 0)
|
|
{
|
|
x_segment_time[0] += segment_time;
|
|
}
|
|
else
|
|
{
|
|
x_segment_time[2] = x_segment_time[1];
|
|
x_segment_time[1] = x_segment_time[0];
|
|
x_segment_time[0] = segment_time;
|
|
}
|
|
if((direction_change & (1<<Y_AXIS)) == 0)
|
|
{
|
|
y_segment_time[0] += segment_time;
|
|
}
|
|
else
|
|
{
|
|
y_segment_time[2] = y_segment_time[1];
|
|
y_segment_time[1] = y_segment_time[0];
|
|
y_segment_time[0] = segment_time;
|
|
}
|
|
long max_x_segment_time = max(x_segment_time[0], max(x_segment_time[1], x_segment_time[2]));
|
|
long max_y_segment_time = max(y_segment_time[0], max(y_segment_time[1], y_segment_time[2]));
|
|
long min_xy_segment_time =min(max_x_segment_time, max_y_segment_time);
|
|
if(min_xy_segment_time < MAX_FREQ_TIME)
|
|
speed_factor = min(speed_factor, speed_factor * (float)min_xy_segment_time / (float)MAX_FREQ_TIME);
|
|
#endif
|
|
|
|
// Correct the speed
|
|
if( speed_factor < 1.0)
|
|
{
|
|
for(unsigned char i=0; i < 4; i++)
|
|
{
|
|
current_speed[i] *= speed_factor;
|
|
}
|
|
block->nominal_speed *= speed_factor;
|
|
block->nominal_rate *= speed_factor;
|
|
}
|
|
|
|
// Compute and limit the acceleration rate for the trapezoid generator.
|
|
float steps_per_mm = block->step_event_count/block->millimeters;
|
|
if(block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0)
|
|
{
|
|
block->acceleration_st = ceil(retract_acceleration * steps_per_mm); // convert to: acceleration steps/sec^2
|
|
}
|
|
else
|
|
{
|
|
block->acceleration_st = ceil(acceleration * steps_per_mm); // convert to: acceleration steps/sec^2
|
|
// Limit acceleration per axis
|
|
if(((float)block->acceleration_st * (float)block->steps_x / (float)block->step_event_count) > axis_steps_per_sqr_second[X_AXIS])
|
|
block->acceleration_st = axis_steps_per_sqr_second[X_AXIS];
|
|
if(((float)block->acceleration_st * (float)block->steps_y / (float)block->step_event_count) > axis_steps_per_sqr_second[Y_AXIS])
|
|
block->acceleration_st = axis_steps_per_sqr_second[Y_AXIS];
|
|
if(((float)block->acceleration_st * (float)block->steps_e / (float)block->step_event_count) > axis_steps_per_sqr_second[E_AXIS])
|
|
block->acceleration_st = axis_steps_per_sqr_second[E_AXIS];
|
|
if(((float)block->acceleration_st * (float)block->steps_z / (float)block->step_event_count ) > axis_steps_per_sqr_second[Z_AXIS])
|
|
block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS];
|
|
}
|
|
block->acceleration = block->acceleration_st / steps_per_mm;
|
|
block->acceleration_rate = (long)((float)block->acceleration_st * (16777216.0 / (F_CPU / 8.0)));
|
|
|
|
#if 0 // Use old jerk for now
|
|
// Compute path unit vector
|
|
double unit_vec[3];
|
|
|
|
unit_vec[X_AXIS] = delta_mm[X_AXIS]*inverse_millimeters;
|
|
unit_vec[Y_AXIS] = delta_mm[Y_AXIS]*inverse_millimeters;
|
|
unit_vec[Z_AXIS] = delta_mm[Z_AXIS]*inverse_millimeters;
|
|
|
|
// Compute maximum allowable entry speed at junction by centripetal acceleration approximation.
|
|
// Let a circle be tangent to both previous and current path line segments, where the junction
|
|
// deviation is defined as the distance from the junction to the closest edge of the circle,
|
|
// colinear with the circle center. The circular segment joining the two paths represents the
|
|
// path of centripetal acceleration. Solve for max velocity based on max acceleration about the
|
|
// radius of the circle, defined indirectly by junction deviation. This may be also viewed as
|
|
// path width or max_jerk in the previous grbl version. This approach does not actually deviate
|
|
// from path, but used as a robust way to compute cornering speeds, as it takes into account the
|
|
// nonlinearities of both the junction angle and junction velocity.
|
|
double vmax_junction = MINIMUM_PLANNER_SPEED; // Set default max junction speed
|
|
|
|
// Skip first block or when previous_nominal_speed is used as a flag for homing and offset cycles.
|
|
if ((block_buffer_head != block_buffer_tail) && (previous_nominal_speed > 0.0)) {
|
|
// Compute cosine of angle between previous and current path. (prev_unit_vec is negative)
|
|
// NOTE: Max junction velocity is computed without sin() or acos() by trig half angle identity.
|
|
double cos_theta = - previous_unit_vec[X_AXIS] * unit_vec[X_AXIS]
|
|
- previous_unit_vec[Y_AXIS] * unit_vec[Y_AXIS]
|
|
- previous_unit_vec[Z_AXIS] * unit_vec[Z_AXIS] ;
|
|
|
|
// Skip and use default max junction speed for 0 degree acute junction.
|
|
if (cos_theta < 0.95) {
|
|
vmax_junction = min(previous_nominal_speed,block->nominal_speed);
|
|
// Skip and avoid divide by zero for straight junctions at 180 degrees. Limit to min() of nominal speeds.
|
|
if (cos_theta > -0.95) {
|
|
// Compute maximum junction velocity based on maximum acceleration and junction deviation
|
|
double sin_theta_d2 = sqrt(0.5*(1.0-cos_theta)); // Trig half angle identity. Always positive.
|
|
vmax_junction = min(vmax_junction,
|
|
sqrt(block->acceleration * junction_deviation * sin_theta_d2/(1.0-sin_theta_d2)) );
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
// Start with a safe speed
|
|
float vmax_junction = max_xy_jerk/2;
|
|
float vmax_junction_factor = 1.0;
|
|
if(fabs(current_speed[Z_AXIS]) > max_z_jerk/2)
|
|
vmax_junction = min(vmax_junction, max_z_jerk/2);
|
|
if(fabs(current_speed[E_AXIS]) > max_e_jerk/2)
|
|
vmax_junction = min(vmax_junction, max_e_jerk/2);
|
|
vmax_junction = min(vmax_junction, block->nominal_speed);
|
|
float safe_speed = vmax_junction;
|
|
|
|
if ((moves_queued > 1) && (previous_nominal_speed > 0.0001)) {
|
|
float jerk = sqrt(pow((current_speed[X_AXIS]-previous_speed[X_AXIS]), 2)+pow((current_speed[Y_AXIS]-previous_speed[Y_AXIS]), 2));
|
|
// if((fabs(previous_speed[X_AXIS]) > 0.0001) || (fabs(previous_speed[Y_AXIS]) > 0.0001)) {
|
|
vmax_junction = block->nominal_speed;
|
|
// }
|
|
if (jerk > max_xy_jerk) {
|
|
vmax_junction_factor = (max_xy_jerk/jerk);
|
|
}
|
|
if(fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]) > max_z_jerk) {
|
|
vmax_junction_factor= min(vmax_junction_factor, (max_z_jerk/fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS])));
|
|
}
|
|
if(fabs(current_speed[E_AXIS] - previous_speed[E_AXIS]) > max_e_jerk) {
|
|
vmax_junction_factor = min(vmax_junction_factor, (max_e_jerk/fabs(current_speed[E_AXIS] - previous_speed[E_AXIS])));
|
|
}
|
|
vmax_junction = min(previous_nominal_speed, vmax_junction * vmax_junction_factor); // Limit speed to max previous speed
|
|
}
|
|
block->max_entry_speed = vmax_junction;
|
|
|
|
// Initialize block entry speed. Compute based on deceleration to user-defined MINIMUM_PLANNER_SPEED.
|
|
double v_allowable = max_allowable_speed(-block->acceleration,MINIMUM_PLANNER_SPEED,block->millimeters);
|
|
block->entry_speed = min(vmax_junction, v_allowable);
|
|
|
|
// Initialize planner efficiency flags
|
|
// Set flag if block will always reach maximum junction speed regardless of entry/exit speeds.
|
|
// If a block can de/ac-celerate from nominal speed to zero within the length of the block, then
|
|
// the current block and next block junction speeds are guaranteed to always be at their maximum
|
|
// junction speeds in deceleration and acceleration, respectively. This is due to how the current
|
|
// block nominal speed limits both the current and next maximum junction speeds. Hence, in both
|
|
// the reverse and forward planners, the corresponding block junction speed will always be at the
|
|
// the maximum junction speed and may always be ignored for any speed reduction checks.
|
|
if (block->nominal_speed <= v_allowable) {
|
|
block->nominal_length_flag = true;
|
|
}
|
|
else {
|
|
block->nominal_length_flag = false;
|
|
}
|
|
block->recalculate_flag = true; // Always calculate trapezoid for new block
|
|
|
|
// Update previous path unit_vector and nominal speed
|
|
memcpy(previous_speed, current_speed, sizeof(previous_speed)); // previous_speed[] = current_speed[]
|
|
previous_nominal_speed = block->nominal_speed;
|
|
|
|
|
|
#ifdef ADVANCE
|
|
// Calculate advance rate
|
|
if((block->steps_e == 0) || (block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0)) {
|
|
block->advance_rate = 0;
|
|
block->advance = 0;
|
|
}
|
|
else {
|
|
long acc_dist = estimate_acceleration_distance(0, block->nominal_rate, block->acceleration_st);
|
|
float advance = (STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K) *
|
|
(current_speed[E_AXIS] * current_speed[E_AXIS] * EXTRUTION_AREA * EXTRUTION_AREA)*256;
|
|
block->advance = advance;
|
|
if(acc_dist == 0) {
|
|
block->advance_rate = 0;
|
|
}
|
|
else {
|
|
block->advance_rate = advance / (float)acc_dist;
|
|
}
|
|
}
|
|
/*
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM("advance :");
|
|
SERIAL_ECHO(block->advance/256.0);
|
|
SERIAL_ECHOPGM("advance rate :");
|
|
SERIAL_ECHOLN(block->advance_rate/256.0);
|
|
*/
|
|
#endif // ADVANCE
|
|
|
|
calculate_trapezoid_for_block(block, block->entry_speed/block->nominal_speed,
|
|
safe_speed/block->nominal_speed);
|
|
|
|
// Move buffer head
|
|
block_buffer_head = next_buffer_head;
|
|
|
|
// Update position
|
|
memcpy(position, target, sizeof(target)); // position[] = target[]
|
|
|
|
planner_recalculate();
|
|
|
|
st_wake_up();
|
|
}
|
|
|
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
|
vector_3 plan_get_position() {
|
|
vector_3 position = vector_3(st_get_position_mm(X_AXIS), st_get_position_mm(Y_AXIS), st_get_position_mm(Z_AXIS));
|
|
|
|
//position.debug("in plan_get position");
|
|
//plan_bed_level_matrix.debug("in plan_get bed_level");
|
|
matrix_3x3 inverse = matrix_3x3::transpose(plan_bed_level_matrix);
|
|
//inverse.debug("in plan_get inverse");
|
|
position.apply_rotation(inverse);
|
|
//position.debug("after rotation");
|
|
|
|
return position;
|
|
}
|
|
#endif // ENABLE_AUTO_BED_LEVELING
|
|
|
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
|
void plan_set_position(float x, float y, float z, const float &e)
|
|
{
|
|
apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
|
|
#else
|
|
void plan_set_position(const float &x, const float &y, const float &z, const float &e)
|
|
{
|
|
#endif // ENABLE_AUTO_BED_LEVELING
|
|
|
|
position[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]);
|
|
position[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]);
|
|
position[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]);
|
|
position[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]);
|
|
st_set_position(position[X_AXIS], position[Y_AXIS], position[Z_AXIS], position[E_AXIS]);
|
|
previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest.
|
|
previous_speed[0] = 0.0;
|
|
previous_speed[1] = 0.0;
|
|
previous_speed[2] = 0.0;
|
|
previous_speed[3] = 0.0;
|
|
}
|
|
|
|
void plan_set_e_position(const float &e)
|
|
{
|
|
position[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]);
|
|
st_set_e_position(position[E_AXIS]);
|
|
}
|
|
|
|
uint8_t movesplanned()
|
|
{
|
|
return (block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1);
|
|
}
|
|
|
|
#ifdef PREVENT_DANGEROUS_EXTRUDE
|
|
void set_extrude_min_temp(float temp)
|
|
{
|
|
extrude_min_temp=temp;
|
|
}
|
|
#endif
|
|
|
|
// Calculate the steps/s^2 acceleration rates, based on the mm/s^s
|
|
void reset_acceleration_rates()
|
|
{
|
|
for(int8_t i=0; i < NUM_AXIS; i++)
|
|
{
|
|
axis_steps_per_sqr_second[i] = max_acceleration_units_per_sq_second[i] * axis_steps_per_unit[i];
|
|
}
|
|
}
|