156 lines
4.1 KiB
C
156 lines
4.1 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* MRR ESPE pin assignments
|
|
* MRR ESPE is a 3D printer control board based on the ESP32 microcontroller.
|
|
* Supports 5 stepper drivers (using I2S stepper stream), heated bed,
|
|
* single hotend, and LCD controller.
|
|
*/
|
|
|
|
#ifndef ARDUINO_ARCH_ESP32
|
|
#error "Oops! Select an ESP32 board in 'Tools > Board.'"
|
|
#elif EXTRUDERS > 2 || E_STEPPERS > 2
|
|
#error "MRR ESPE only supports two E Steppers. Comment out this line to continue."
|
|
#elif HOTENDS > 1
|
|
#error "MRR ESPE currently supports only one hotend. Comment out this line to continue."
|
|
#endif
|
|
|
|
#define BOARD_INFO_NAME "MRR ESPE"
|
|
#define BOARD_WEBSITE_URL "github.com/maplerainresearch/MRR_ESPE"
|
|
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_STOP_PIN 35
|
|
#define Y_STOP_PIN 32
|
|
#define Z_STOP_PIN 33
|
|
|
|
//
|
|
// Enable I2S stepper stream
|
|
//
|
|
#undef I2S_STEPPER_STREAM
|
|
#define I2S_STEPPER_STREAM
|
|
|
|
#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance
|
|
|
|
#define I2S_WS 26
|
|
#define I2S_BCK 25
|
|
#define I2S_DATA 27
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 129
|
|
#define X_DIR_PIN 130
|
|
#define X_ENABLE_PIN 128
|
|
//#define X_CS_PIN 21
|
|
|
|
#define Y_STEP_PIN 132
|
|
#define Y_DIR_PIN 133
|
|
#define Y_ENABLE_PIN 131
|
|
//#define Y_CS_PIN 22
|
|
|
|
#define Z_STEP_PIN 135
|
|
#define Z_DIR_PIN 136
|
|
#define Z_ENABLE_PIN 134
|
|
//#define Z_CS_PIN 5 // SS_PIN
|
|
|
|
#define E0_STEP_PIN 138
|
|
#define E0_DIR_PIN 139
|
|
#define E0_ENABLE_PIN 137
|
|
//#define E0_CS_PIN 21
|
|
|
|
#define E1_STEP_PIN 141
|
|
#define E1_DIR_PIN 142
|
|
#define E1_ENABLE_PIN 140
|
|
//#define E1_CS_PIN 22
|
|
|
|
#define Z2_STEP_PIN 141
|
|
#define Z2_DIR_PIN 142
|
|
#define Z2_ENABLE_PIN 140
|
|
//#define Z2_CS_PIN 5
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 36 // Analog Input
|
|
#define TEMP_1_PIN 34 // Analog Input
|
|
#define TEMP_BED_PIN 39 // Analog Input
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 145 // 2
|
|
#define FAN_PIN 146 // 15
|
|
#define HEATER_BED_PIN 144 // 4
|
|
|
|
#define CONTROLLER_FAN_PIN 147
|
|
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
|
|
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
|
|
#define FAN1_PIN 149
|
|
|
|
//
|
|
// MicroSD card
|
|
//
|
|
#define MOSI_PIN 23
|
|
#define MISO_PIN 19
|
|
#define SCK_PIN 18
|
|
#define SDSS 5
|
|
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
|
|
|
|
//////////////////////////
|
|
// LCDs and Controllers //
|
|
//////////////////////////
|
|
|
|
#if HAS_GRAPHICAL_LCD
|
|
|
|
#define LCD_PINS_RS 13
|
|
#define LCD_PINS_ENABLE 17
|
|
#define LCD_PINS_D4 16
|
|
|
|
#if ENABLED(CR10_STOCKDISPLAY)
|
|
|
|
#define BEEPER_PIN 151
|
|
|
|
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
|
|
|
#define BEEPER_PIN 151
|
|
|
|
//#define LCD_PINS_D5 150
|
|
//#define LCD_PINS_D6 151
|
|
//#define LCD_PINS_D7 153
|
|
|
|
#else
|
|
|
|
#error "Only CR10_STOCKDISPLAY and REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER are currently supported. Comment out this line to continue."
|
|
|
|
#endif
|
|
|
|
#define BTN_EN1 0
|
|
#define BTN_EN2 12
|
|
#define BTN_ENC 14
|
|
|
|
#endif // HAS_GRAPHICAL_LCD
|