MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
efbd705eda
Firmware2/Marlin
History
AnHardt efbd705eda Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" 
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
to avoid senting two "ok"s for a single g-code.

Doing the same for M105 would break the input filters of the hosts.
For M105 the other "ok" is omitted.
2016-02-09 13:36:03 +01:00
..
configurator Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
example_configurations Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
fonts Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
scripts Repair formula mangled by PR#1319 in Jan 2015 2016-01-15 10:06:27 -06:00
blinkm.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
blinkm.h Deprecate Support for Arduino IDE < 1.0.5 2015-06-08 17:15:28 -05:00
boards.h Split RAMPS 1.3 an 1.4 (PR#2741) 2015-11-13 07:13:48 -06:00
buzzer.cpp Suppress some compiler warnings 2015-08-16 06:56:47 -05:00
buzzer.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
cardreader.cpp Getting rid of SDEXTRASLOW, SDSLOW variables. 2016-02-07 07:58:52 -06:00
cardreader.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
Conditionals.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
Configuration_adv.h Clean up spacing and duplicate entries 2015-12-10 07:20:52 -06:00
configuration_store.cpp Use "UNUSED" to squash compiler warnings 2015-11-12 00:03:22 -06:00
configuration_store.h Overridable Options - Part 11 (PR#2563) 2015-07-31 01:07:04 -05:00
Configuration.h Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
Default_Version.h Marlin 1.1.0 Release Candidate 3 - 01 December 2015 2015-12-01 07:24:45 -06:00
digipot_mcp4451.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_bitmaps.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_6x9_marlin.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_HD44780_C.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_HD44780_J.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_HD44780_W.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_1.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_5_Cyrillic.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_CN.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_Kana.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_font_data_Marlin_symbols.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
dogm_lcd_implementation.h Use "defined" with LCD_PIN_BL and LCD_PIN_RESET 2015-11-12 00:03:22 -06:00
fastio.h Clean up "else" and other spacing 2015-11-12 00:03:21 -06:00
language_an.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_bg.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_ca.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_cn.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_cz.h Show nozzles, heaters, and extruders numbered 1-4 2015-09-12 07:40:18 -05:00
language_da.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_de.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_en.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_es.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_eu.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_fi.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_fr.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_gl.h Galician (gl) language. 2015-09-30 14:46:01 -05:00
language_it.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_kana_utf8.h Update language_kana_utf8.h 2015-11-12 00:00:32 -06:00
language_kana.h Update language_kana.h 2015-11-12 00:00:51 -06:00
language_nl.h Back port language translation 2015-12-10 06:31:41 -06:00
language_pl.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_pt-br.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_pt.h Fix Portuguese (Portugal) strings (PR#2700) 2015-11-12 00:08:42 -06:00
language_ru.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
language_test.h Cleanup file formatting 2015-09-12 07:48:27 -05:00
language.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
M100_Free_Mem_Chk.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
macros.h Add COUNT macro and apply 2015-07-22 18:16:05 -05:00
Makefile Split RAMPS 1.3 an 1.4 (PR#2741) 2015-11-13 07:13:48 -06:00
Marlin_main.cpp Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" 2016-02-09 13:36:03 +01:00
Marlin.h Host parseble output for M109, M190 and M303 2015-12-07 15:37:53 -06:00
Marlin.ino Apply ENABLED / DISABLED to Marlin core files (PR#2558) 2015-07-31 01:03:58 -05:00
MarlinSerial.cpp Clean up "else" and other spacing 2015-11-12 00:03:21 -06:00
MarlinSerial.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
mesh_bed_leveling.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
mesh_bed_leveling.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_3DRAG.h Rename BEEPER to BEEPER_PIN 2015-07-31 17:13:53 -05:00
pins_5DPRINT.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_99.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_AZTEEG_X1.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_AZTEEG_X3_PRO.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_AZTEEG_X3.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_BAM_DICE_DUE.h Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
pins_BRAINWAVE_PRO.h Call the probe pin a probe pin and not a min endstop 2015-12-10 07:20:52 -06:00
pins_BRAINWAVE.h Overridable Options - Part 4 (PR#2556) 2015-07-31 00:44:53 -05:00
pins_CHEAPTRONIC.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_ELEFU_3.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_FELIX2.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_GEN3_MONOLITHIC.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN3_PLUS.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_GEN6_DELUXE.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN6.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN7_12.h cleanup 2015-01-27 15:32:34 -08:00
pins_GEN7_13.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_GEN7_14.h cleanup 2015-01-27 15:32:34 -08:00
pins_GEN7_CUSTOM.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_K8200.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_LEAPFROG.h Move Y2 and Z2 pins defines to pins.h 2015-09-07 09:41:06 -05:00
pins_MEGACONTROLLER.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_MEGATRONICS_2.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_MEGATRONICS_3.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_MEGATRONICS.h Apply remaining ENABLED/DISABLED conditionals 2015-08-03 16:04:48 -05:00
pins_MELZI_MAKR3D.h Rename and repair MELZI_1284 (PR#2301) 2015-06-22 22:30:07 -04:00
pins_MELZI.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_MINIRAMBO.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_MINITRONICS.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_MKS_BASE.h Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
pins_OMCA_A.h Rename BEEPER to BEEPER_PIN 2015-08-02 22:09:08 -05:00
pins_OMCA.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_PRINTRBOARD.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_RAMBO.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_RAMPS_13_EFB.h Add pins_RAMPS_13_EFB.h to reduce redundancy 2015-06-15 20:17:09 -05:00
pins_RAMPS_13.h If unused, just don’t define it. 2015-12-10 07:20:52 -06:00
pins_RAMPS_OLD.h Overridable Options - Part 4 (PR#2556) 2015-07-31 00:44:53 -05:00
pins_RIGIDBOARD.h Fixing Rigidbot LCD Panel Support 2016-02-07 07:58:52 -06:00
pins_RUMBA.h Fix up probe pin define and test 2015-09-10 10:54:03 -05:00
pins_SANGUINOLOLU_11.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_SANGUINOLOLU_12.h Rename and repair MELZI_1284 (PR#2301) 2015-06-22 22:30:07 -04:00
pins_SAV_MKI.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_SETHI.h cleanup 2015-01-27 15:32:34 -08:00
pins_STB_11.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_TEENSY2.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_TEENSYLU.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
pins_ULTIMAIN_2.h SDCARDDETECT -> SD_DETECT, added docs 2015-08-02 21:59:41 -05:00
pins_ULTIMAKER_OLD.h Split up pins to make it more manageable 2015-01-27 15:32:34 -08:00
pins_ULTIMAKER.h Define servo pins just like other pins 2015-08-02 23:26:58 -05:00
pins.h Split RAMPS 1.3 an 1.4 (PR#2741) 2015-11-13 07:13:48 -06:00
planner.cpp Improve planner & stepper PR #263 2015-12-10 07:24:37 -06:00
planner.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
qr_solve.cpp Use a ternary in qr_solve.cpp 2015-11-12 00:03:22 -06:00
qr_solve.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SanityCheck.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
Sd2Card.cpp Clean up "else" and other spacing 2015-11-12 00:03:21 -06:00
Sd2Card.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
Sd2PinMap.h Clean up "else" and other spacing 2015-11-12 00:03:21 -06:00
SdBaseFile.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdBaseFile.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdFatConfig.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdFatStructs.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdFatUtil.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdFatUtil.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdFile.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdFile.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdInfo.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdVolume.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
SdVolume.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
servo.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
servo.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
speed_lookuptable.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
stepper_indirection.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
stepper_indirection.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
stepper.cpp Update stepper.cpp 2016-01-15 16:50:43 +01:00
stepper.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
temperature.cpp Host parseble output for M109, M190 and M303 2015-12-07 15:37:53 -06:00
temperature.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
thermistortables.h Allow Thermistor #12 to be used on hotends also 2015-12-10 06:31:31 -06:00
ultralcd_implementation_hitachi_HD44780.h Change XY formatting on LCD (PR#2740) 2015-11-13 06:46:11 -06:00
ultralcd_st7920_u8glib_rrd.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
ultralcd.cpp Using SET_INPUT instead of pinMode 2016-02-07 07:58:52 -06:00
ultralcd.h Cleaning up, getting rid of the fake encoder count variable. 2016-02-07 07:58:52 -06:00
utf_mapper.h Use static locals in utf_mapper.h 2015-11-12 00:03:21 -06:00
vector_3.cpp Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
vector_3.h Styling adjustments (PR#2668 & PR#2670) 2015-10-03 22:02:45 -05:00
watchdog.cpp Clean up watchdog impl. 2015-11-12 00:03:22 -06:00
watchdog.h Clean up watchdog impl. 2015-11-12 00:03:22 -06:00