diff --git a/roles/xrdp_apphost/handlers/main.yml b/roles/xrdp_apphost/handlers/main.yml
index 687a07f..8c1af26 100644
--- a/roles/xrdp_apphost/handlers/main.yml
+++ b/roles/xrdp_apphost/handlers/main.yml
@@ -6,4 +6,7 @@
 - name: Install LightBurn
   shell: "{{ lightburn_target }}"
   become: yes
-  become_user: "{{ lightburn_user }}"
\ No newline at end of file
+  become_user: "{{ lightburn_user }}"
+
+- name: Reload smbd
+  service: name=smbd state=reloaded
\ No newline at end of file
diff --git a/roles/xrdp_apphost/tasks/main.yml b/roles/xrdp_apphost/tasks/main.yml
index adf5437..8e8f3c3 100644
--- a/roles/xrdp_apphost/tasks/main.yml
+++ b/roles/xrdp_apphost/tasks/main.yml
@@ -22,6 +22,19 @@
   copy: src={{ xrdp_ls_logo_filename }} dest=/usr/local/share/xrdp/{{ xrdp_ls_logo_filename }}
   notify: Restart xrdp
 
+
+- name: Install samba
+  apt:
+    name:
+    - samba
+
+- name: Configure samba
+  template:
+    src: smb.conf.j2
+    dest: /etc/samba/smb.conf
+  notify: Reload smbd
+
+
 - name: Install LightBurn dependencies
   apt:
     name:
@@ -37,6 +50,9 @@
 - name: Create LightBurn .xsession
   template: src=lightburn_xsession.j2 dest=/home/{{ lightburn_user }}/.xsession
 
+- name: Create LightBurn data directory
+  file: path=/home/{{ lightburn_user }}/data state=directory mode=0755 owner={{ lightburn_user }} group={{ lightburn_group }}
+
 - name: Download LightBurn binary
   get_url: url={{ lightburn_url }} dest={{ lightburn_target }} checksum={{ lightburn_checksum }} mode=0755
   notify: Install LightBurn
\ No newline at end of file
diff --git a/roles/xrdp_apphost/templates/smb.conf.j2 b/roles/xrdp_apphost/templates/smb.conf.j2
new file mode 100644
index 0000000..d29a7cc
--- /dev/null
+++ b/roles/xrdp_apphost/templates/smb.conf.j2
@@ -0,0 +1,247 @@
+#
+# Sample configuration file for the Samba suite for Debian GNU/Linux.
+#
+#
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options most of which 
+# are not shown in this example
+#
+# Some options that are often worth tuning have been included as
+# commented-out examples in this file.
+#  - When such options are commented with ";", the proposed setting
+#    differs from the default Samba behaviour
+#  - When commented with "#", the proposed setting is the default
+#    behaviour of Samba but the option is considered important
+#    enough to be mentioned here
+#
+# NOTE: Whenever you modify this file you should run the command
+# "testparm" to check that you have not made any basic syntactic 
+# errors. 
+
+#======================= Global Settings =======================
+
+[global]
+
+## Browsing/Identification ###
+
+# Change this to the workgroup/NT-domain name your Samba server will part of
+   workgroup = WORKGROUP
+
+#### Networking ####
+
+# The specific set of interfaces / networks to bind to
+# This can be either the interface name or an IP address/netmask;
+# interface names are normally preferred
+;   interfaces = 127.0.0.0/8 eth0
+
+# Only bind to the named interfaces and/or networks; you must use the
+# 'interfaces' option above to use this.
+# It is recommended that you enable this feature if your Samba machine is
+# not protected by a firewall or is a firewall itself.  However, this
+# option cannot handle dynamic or non-broadcast interfaces correctly.
+;   bind interfaces only = yes
+
+
+
+#### Debugging/Accounting ####
+
+# This tells Samba to use a separate log file for each machine
+# that connects
+   log file = /var/log/samba/log.%m
+
+# Cap the size of the individual log files (in KiB).
+   max log size = 1000
+
+# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
+# Append syslog@1 if you want important messages to be sent to syslog too.
+   logging = file
+
+# Do something sensible when Samba crashes: mail the admin a backtrace
+   panic action = /usr/share/samba/panic-action %d
+
+
+####### Authentication #######
+
+# Server role. Defines in which mode Samba will operate. Possible
+# values are "standalone server", "member server", "classic primary
+# domain controller", "classic backup domain controller", "active
+# directory domain controller". 
+#
+# Most people will want "standalone server" or "member server".
+# Running as "active directory domain controller" will require first
+# running "samba-tool domain provision" to wipe databases and create a
+# new domain.
+   server role = standalone server
+
+   obey pam restrictions = yes
+
+# This boolean parameter controls whether Samba attempts to sync the Unix
+# password with the SMB password when the encrypted SMB password in the
+# passdb is changed.
+   unix password sync = yes
+
+# For Unix password sync to work on a Debian GNU/Linux system, the following
+# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
+# sending the correct chat script for the passwd program in Debian Sarge).
+   passwd program = /usr/bin/passwd %u
+   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
+
+# This boolean controls whether PAM will be used for password changes
+# when requested by an SMB client instead of the program listed in
+# 'passwd program'. The default is 'no'.
+   pam password change = yes
+
+# This option controls how unsuccessful authentication attempts are mapped
+# to anonymous connections
+   map to guest = bad user
+
+########## Domains ###########
+
+#
+# The following settings only takes effect if 'server role = classic
+# primary domain controller', 'server role = classic backup domain controller'
+# or 'domain logons' is set 
+#
+
+# It specifies the location of the user's
+# profile directory from the client point of view) The following
+# required a [profiles] share to be setup on the samba server (see
+# below)
+;   logon path = \\%N\profiles\%U
+# Another common choice is storing the profile in the user's home directory
+# (this is Samba's default)
+#   logon path = \\%N\%U\profile
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of a user's home directory (from the client
+# point of view)
+;   logon drive = H:
+#   logon home = \\%N\%U
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the script to run during logon. The script must be stored
+# in the [netlogon] share
+# NOTE: Must be store in 'DOS' file format convention
+;   logon script = logon.cmd
+
+# This allows Unix users to be created on the domain controller via the SAMR
+# RPC pipe.  The example command creates a user account with a disabled Unix
+# password; please adapt to your needs
+; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
+
+# This allows machine accounts to be created on the domain controller via the 
+# SAMR RPC pipe.  
+# The following assumes a "machines" group exists on the system
+; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
+
+# This allows Unix groups to be created on the domain controller via the SAMR
+# RPC pipe.  
+; add group script = /usr/sbin/addgroup --force-badname %g
+
+############ Misc ############
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+;   include = /home/samba/etc/smb.conf.%m
+
+# Some defaults for winbind (make sure you're not using the ranges
+# for something else.)
+;   idmap config * :              backend = tdb
+;   idmap config * :              range   = 3000-7999
+;   idmap config YOURDOMAINHERE : backend = tdb
+;   idmap config YOURDOMAINHERE : range   = 100000-999999
+;   template shell = /bin/bash
+
+# Setup usershare options to enable non-root users to share folders
+# with the net usershare command.
+
+# Maximum number of usershare. 0 means that usershare is disabled.
+#   usershare max shares = 100
+
+# Allow users who've been granted usershare privileges to create
+# public shares, not just authenticated ones
+   usershare allow guests = yes
+
+#======================= Share Definitions =======================
+
+;[homes]
+;   comment = Home Directories
+;   browseable = no
+
+# By default, the home directories are exported read-only. Change the
+# next parameter to 'no' if you want to be able to write to them.
+;   read only = yes
+
+# File creation mask is set to 0700 for security reasons. If you want to
+# create files with group=rw permissions, set next parameter to 0775.
+;   create mask = 0700
+
+# Directory creation mask is set to 0700 for security reasons. If you want to
+# create dirs. with group=rw permissions, set next parameter to 0775.
+;   directory mask = 0700
+
+# By default, \\server\username shares can be connected to by anyone
+# with access to the samba server.
+# The following parameter makes sure that only "username" can connect
+# to \\server\username
+# This might need tweaking when using external authentication schemes
+;   valid users = %S
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+# (you need to configure Samba to act as a domain controller too.)
+;[netlogon]
+;   comment = Network Logon Service
+;   path = /home/samba/netlogon
+;   guest ok = yes
+;   read only = yes
+
+# Un-comment the following and create the profiles directory to store
+# users profiles (see the "logon path" option above)
+# (you need to configure Samba to act as a domain controller too.)
+# The path below should be writable by all users so that their
+# profile directory may be created the first time they log on
+;[profiles]
+;   comment = Users profiles
+;   path = /home/samba/profiles
+;   guest ok = no
+;   browseable = no
+;   create mask = 0600
+;   directory mask = 0700
+
+;[printers]
+;   comment = All Printers
+;   browseable = no
+;   path = /var/spool/samba
+;   printable = yes
+;   guest ok = no
+;   read only = yes
+;   create mask = 0700
+
+# Windows clients look for this share name as a source of downloadable
+# printer drivers
+;[print$]
+;   comment = Printer Drivers
+;   path = /var/lib/samba/printers
+;   browseable = yes
+;   read only = yes
+;   guest ok = no
+# Uncomment to allow remote administration of Windows print drivers.
+# You may need to replace 'lpadmin' with the name of the group your
+# admin users are members of.
+# Please note that you also need to set appropriate Unix permissions
+# to the drivers directory for these users to have write rights in it
+;   write list = root, @lpadmin
+
+# LightBurn share
+[lightburn]
+   comment = LightBurn data folder
+   path = /home/{{ lightburn_user }}/data
+   browseable = yes
+   read only = no
+   guest ok = yes
+   create mask = 0600
+   directory mask = 0700
+   force user = {{ lightburn_user }}
+   hide dot files = yes
\ No newline at end of file