matrix: rebase homeserver.yml against upstream

This commit is contained in:
Markus 2021-01-28 18:29:47 +01:00
parent 4cc75159d2
commit a7373f86f3

View File

@ -8,10 +8,23 @@
## Server ##
# The domain name of the server, with optional explicit port.
# This is used by remote servers to connect to this server,
# e.g. matrix.org, localhost:8080, etc.
# This is also the last part of your UserID.
# The public-facing domain of the server
#
# The server_name name will appear at the end of usernames and room addresses
# created on this server. For example if the server_name was example.com,
# usernames on this server would be in the format @user:example.com
#
# In most cases you should avoid using a matrix specific subdomain such as
# matrix.example.com or synapse.example.com as the server_name for the same
# reasons you wouldn't use user@email.example.com as your email address.
# See https://github.com/matrix-org/synapse/blob/master/docs/delegate.md
# for information on how to host Synapse on a subdomain while preserving
# a clean server_name.
#
# The server_name cannot be changed later so it is important to
# configure this correctly before you start Synapse. It should be all
# lowercase and may contain an explicit port.
# Examples: matrix.org, localhost:8080
#
#
# This is set in /etc/matrix-synapse/conf.d/server_name.yaml for Debian installations.
@ -31,11 +44,16 @@ pid_file: "/var/run/matrix-synapse.pid"
#
#web_client_location: https://riot.example.com/
# The public-facing base URL that clients use to access this HS
# (not including _matrix/...). This is the same URL a user would
# enter into the 'custom HS URL' field on their client. If you
# use synapse with a reverse proxy, this should be the URL to reach
# synapse via the proxy.
# The public-facing base URL that clients use to access this Homeserver (not
# including _matrix/...). This is the same URL a user might enter into the
# 'Custom Homeserver URL' field on their client. If you use Synapse with a
# reverse proxy, this should be the URL to reach Synapse via the proxy.
# Otherwise, it should be the URL to reach Synapse's client HTTP listener (see
# 'listeners' below).
#
# If this is left unset, it defaults to 'https://<server_name>/'. (Note that
# that will not work unless you configure Synapse or a reverse-proxy to listen
# on port 443.)
#
public_baseurl: https://{{ matrix_domain }}/
@ -83,7 +101,7 @@ public_baseurl: https://{{ matrix_domain }}/
# For example, for room version 1, default_room_version should be set
# to "1".
#
#default_room_version: "5"
#default_room_version: "6"
# The GC threshold parameters to pass to `gc.set_threshold`, if defined
#
@ -108,6 +126,47 @@ public_baseurl: https://{{ matrix_domain }}/
#
#enable_search: false
# Prevent outgoing requests from being sent to the following blacklisted IP address
# CIDR ranges. If this option is not specified then it defaults to private IP
# address ranges (see the example below).
#
# The blacklist applies to the outbound requests for federation, identity servers,
# push servers, and for checking key validity for third-party invite events.
#
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
# listed here, since they correspond to unroutable addresses.)
#
# This option replaces federation_ip_range_blacklist in Synapse v1.25.0.
#
#ip_range_blacklist:
# - '127.0.0.0/8'
# - '10.0.0.0/8'
# - '172.16.0.0/12'
# - '192.168.0.0/16'
# - '100.64.0.0/10'
# - '192.0.0.0/24'
# - '169.254.0.0/16'
# - '198.18.0.0/15'
# - '192.0.2.0/24'
# - '198.51.100.0/24'
# - '203.0.113.0/24'
# - '224.0.0.0/4'
# - '::1/128'
# - 'fe80::/10'
# - 'fc00::/7'
# List of IP address CIDR ranges that should be allowed for federation,
# identity servers, push servers, and for checking key validity for
# third-party invite events. This is useful for specifying exceptions to
# wide-ranging blacklisted target IP ranges - e.g. for communication with
# a push server only visible in your network.
#
# This whitelist overrides ip_range_blacklist and defaults to an empty
# list.
#
#ip_range_whitelist:
# - '192.168.1.1'
# List of ports that Synapse should listen on, their purpose and their
# configuration.
#
@ -355,11 +414,10 @@ retention:
# min_lifetime: 1d
# max_lifetime: 1y
# Retention policy limits. If set, a user won't be able to send a
# 'm.room.retention' event which features a 'min_lifetime' or a 'max_lifetime'
# that's not within this range. This is especially useful in closed federations,
# in which server admins can make sure every federating server applies the same
# rules.
# Retention policy limits. If set, and the state of a room contains a
# 'm.room.retention' event in its state which contains a 'min_lifetime' or a
# 'max_lifetime' that's out of these bounds, Synapse will cap the room's policy
# to these limits when running purge jobs.
#
#allowed_lifetime_min: 1d
#allowed_lifetime_max: 1y
@ -385,12 +443,19 @@ retention:
# (e.g. every 12h), but not want that purge to be performed by a job that's
# iterating over every room it knows, which could be heavy on the server.
#
# If any purge job is configured, it is strongly recommended to have at least
# a single job with neither 'shortest_max_lifetime' nor 'longest_max_lifetime'
# set, or one job without 'shortest_max_lifetime' and one job without
# 'longest_max_lifetime' set. Otherwise some rooms might be ignored, even if
# 'allowed_lifetime_min' and 'allowed_lifetime_max' are set, because capping a
# room's policy to these values is done after the policies are retrieved from
# Synapse's database (which is done using the range specified in a purge job's
# configuration).
#
#purge_jobs:
# - shortest_max_lifetime: 1d
# longest_max_lifetime: 3d
# - longest_max_lifetime: 3d
# interval: 12h
# - shortest_max_lifetime: 3d
# longest_max_lifetime: 1y
# interval: 1d
# Inhibits the /requestToken endpoints from returning an error that might leak
@ -403,6 +468,24 @@ retention:
#
#request_token_inhibit_3pid_errors: true
# A list of domains that the domain portion of 'next_link' parameters
# must match.
#
# This parameter is optionally provided by clients while requesting
# validation of an email or phone number, and maps to a link that
# users will be automatically redirected to after validation
# succeeds. Clients can make use this parameter to aid the validation
# process.
#
# The whitelist is applied whether the homeserver or an
# identity server is handling validation.
#
# The default value is no whitelist functionality; all domains are
# allowed. Setting this value to an empty list will instead disallow
# all domains.
#
#next_link_domain_whitelist: ["matrix.org"]
## TLS ##
@ -569,6 +652,7 @@ acme:
#tls_fingerprints: [{"sha256": "<base64_encoded_sha256_fingerprint>"}]
## Federation ##
# Restrict federation to the following whitelist of domains.
# N.B. we recommend also firewalling your federation listener to limit
@ -581,26 +665,16 @@ acme:
# - nyc.example.com
# - syd.example.com
# Prevent federation requests from being sent to the following
# blacklist IP address CIDR ranges. If this option is not specified, or
# specified with an empty list, no ip range blacklist will be enforced.
# Report prometheus metrics on the age of PDUs being sent to and received from
# the following domains. This can be used to give an idea of "delay" on inbound
# and outbound federation, though be aware that any delay can be due to problems
# at either end or with the intermediate network.
#
# As of Synapse v1.4.0 this option also affects any outbound requests to identity
# servers provided by user input.
# By default, no domains are monitored in this way.
#
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
# listed here, since they correspond to unroutable addresses.)
#
federation_ip_range_blacklist:
- '127.0.0.0/8'
- '10.0.0.0/8'
- '172.16.0.0/12'
- '192.168.0.0/16'
- '100.64.0.0/10'
- '169.254.0.0/16'
- '::1/128'
- 'fe80::/64'
- 'fc00::/7'
#federation_metrics_domains:
# - matrix.org
# - example.com
## Caching ##
@ -890,9 +964,15 @@ max_upload_size: 25M
# - '172.16.0.0/12'
# - '192.168.0.0/16'
# - '100.64.0.0/10'
# - '192.0.0.0/24'
# - '169.254.0.0/16'
# - '198.18.0.0/15'
# - '192.0.2.0/24'
# - '198.51.100.0/24'
# - '203.0.113.0/24'
# - '224.0.0.0/4'
# - '::1/128'
# - 'fe80::/64'
# - 'fe80::/10'
# - 'fc00::/7'
# List of IP address CIDR ranges that the URL preview spider is allowed
@ -1061,8 +1141,9 @@ account_validity:
# send an email to the account's email address with a renewal link. By
# default, no such emails are sent.
#
# If you enable this setting, you will also need to fill out the 'email' and
# 'public_baseurl' configuration sections.
# If you enable this setting, you will also need to fill out the 'email'
# configuration section. You should also check that 'public_baseurl' is set
# correctly.
#
#renew_at: 1w
@ -1153,8 +1234,7 @@ account_validity:
# The identity server which we suggest that clients should use when users log
# in on this server.
#
# (By default, no suggestion is made, so it is left up to the client.
# This setting is ignored unless public_baseurl is also set.)
# (By default, no suggestion is made, so it is left up to the client.)
#
#default_identity_server: https://matrix.org
@ -1167,8 +1247,9 @@ account_validity:
# email will be globally disabled.
#
# Additionally, if `msisdn` is not set, registration and password resets via msisdn
# will be disabled regardless. This is due to Synapse currently not supporting any
# method of sending SMS messages on its own.
# will be disabled regardless, and users will not be able to associate an msisdn
# identifier to their account. This is due to Synapse currently not supporting
# any method of sending SMS messages on its own.
#
# To enable using an identity server for operations regarding a particular third-party
# identifier type, set the value to the URL of that identity server as shown in the
@ -1178,8 +1259,6 @@ account_validity:
# by the Matrix Identity Service API specification:
# https://matrix.org/docs/spec/identity_service/latest
#
# If a delegate is specified, the config option public_baseurl must also be filled out.
#
account_threepid_delegates:
#email: https://example.com # Delegate email sending to example.com
#msisdn: http://localhost:8090 # Delegate SMS sending to this local process
@ -1442,16 +1521,22 @@ trusted_key_servers:
## Single sign-on integration ##
# The following settings can be used to make Synapse use a single sign-on
# provider for authentication, instead of its internal password database.
#
# You will probably also want to set the following options to `false` to
# disable the regular login/registration flows:
# * enable_registration
# * password_config.enabled
#
# You will also want to investigate the settings under the "sso" configuration
# section below.
# Enable SAML2 for registration and login. Uses pysaml2.
#
# At least one of `sp_config` or `config_path` must be set in this section to
# enable SAML login.
#
# (You will probably also want to set the following options to `false` to
# disable the regular login/registration flows:
# * enable_registration
# * password_config.enabled
#
# Once SAML support is enabled, a metadata file will be exposed at
# https://<server>:<port>/_matrix/saml2/metadata.xml, which you may be able to
# use to configure your SAML IdP with. Alternatively, you can manually configure
@ -1466,40 +1551,70 @@ saml2_config:
# so it is not normally necessary to specify them unless you need to
# override them.
#
#sp_config:
# # point this to the IdP's metadata. You can use either a local file or
# # (preferably) a URL.
# metadata:
# #local: ["saml2/idp.xml"]
# remote:
# - url: https://our_idp/metadata.xml
#
# # By default, the user has to go to our login page first. If you'd like
# # to allow IdP-initiated login, set 'allow_unsolicited: true' in a
# # 'service.sp' section:
# #
# #service:
# # sp:
# # allow_unsolicited: true
#
# # The examples below are just used to generate our metadata xml, and you
# # may well not need them, depending on your setup. Alternatively you
# # may need a whole lot more detail - see the pysaml2 docs!
#
# description: ["My awesome SP", "en"]
# name: ["Test SP", "en"]
#
# organization:
# name: Example com
# display_name:
# - ["Example co", "en"]
# url: "http://example.com"
#
# contact_person:
# - given_name: Bob
# sur_name: "the Sysadmin"
# email_address": ["admin@example.com"]
# contact_type": technical
sp_config:
# Point this to the IdP's metadata. You must provide either a local
# file via the `local` attribute or (preferably) a URL via the
# `remote` attribute.
#
#metadata:
# local: ["saml2/idp.xml"]
# remote:
# - url: https://our_idp/metadata.xml
# Allowed clock difference in seconds between the homeserver and IdP.
#
# Uncomment the below to increase the accepted time difference from 0 to 3 seconds.
#
#accepted_time_diff: 3
# By default, the user has to go to our login page first. If you'd like
# to allow IdP-initiated login, set 'allow_unsolicited: true' in a
# 'service.sp' section:
#
#service:
# sp:
# allow_unsolicited: true
# The examples below are just used to generate our metadata xml, and you
# may well not need them, depending on your setup. Alternatively you
# may need a whole lot more detail - see the pysaml2 docs!
#description: ["My awesome SP", "en"]
#name: ["Test SP", "en"]
#ui_info:
# display_name:
# - lang: en
# text: "Display Name is the descriptive name of your service."
# description:
# - lang: en
# text: "Description should be a short paragraph explaining the purpose of the service."
# information_url:
# - lang: en
# text: "https://example.com/terms-of-service"
# privacy_statement_url:
# - lang: en
# text: "https://example.com/privacy-policy"
# keywords:
# - lang: en
# text: ["Matrix", "Element"]
# logo:
# - lang: en
# text: "https://example.com/logo.svg"
# width: "200"
# height: "80"
#organization:
# name: Example com
# display_name:
# - ["Example co", "en"]
# url: "http://example.com"
#contact_person:
# - given_name: Bob
# sur_name: "the Sysadmin"
# email_address": ["admin@example.com"]
# contact_type": technical
# Instead of putting the config inline as above, you can specify a
# separate pysaml2 configuration file:
@ -1574,157 +1689,200 @@ saml2_config:
# - attribute: department
# value: "sales"
# Directory in which Synapse will try to find the template files below.
# If not set, default templates from within the Synapse package will be used.
# If the metadata XML contains multiple IdP entities then the `idp_entityid`
# option must be set to the entity to redirect users to.
#
# DO NOT UNCOMMENT THIS SETTING unless you want to customise the templates.
# If you *do* uncomment it, you will need to make sure that all the templates
# below are in the directory.
# Most deployments only have a single IdP entity and so should omit this
# option.
#
# Synapse will look for the following templates in this directory:
#
# * HTML page to display to users if something goes wrong during the
# authentication process: 'saml_error.html'.
#
# When rendering, this template is given the following variables:
# * code: an HTML error code corresponding to the error that is being
# returned (typically 400 or 500)
#
# * msg: a textual message describing the error.
#
# The variables will automatically be HTML-escaped.
#
# You can see the default templates at:
# https://github.com/matrix-org/synapse/tree/master/synapse/res/templates
#
#template_dir: "res/templates"
#idp_entityid: 'https://our_idp/entityid'
# OpenID Connect integration. The following settings can be used to make Synapse
# use an OpenID Connect Provider for authentication, instead of its internal
# password database.
# List of OpenID Connect (OIDC) / OAuth 2.0 identity providers, for registration
# and login.
#
# See https://github.com/matrix-org/synapse/blob/master/docs/openid.md.
# Options for each entry include:
#
oidc_config:
# Uncomment the following to enable authorization against an OpenID Connect
# server. Defaults to false.
# idp_id: a unique identifier for this identity provider. Used internally
# by Synapse; should be a single word such as 'github'.
#
# Note that, if this is changed, users authenticating via that provider
# will no longer be recognised as the same user!
#
# idp_name: A user-facing name for this identity provider, which is used to
# offer the user a choice of login mechanisms.
#
# idp_icon: An optional icon for this identity provider, which is presented
# by identity picker pages. If given, must be an MXC URI of the format
# mxc://<server-name>/<media-id>. (An easy way to obtain such an MXC URI
# is to upload an image to an (unencrypted) room and then copy the "url"
# from the source of the event.)
#
# discover: set to 'false' to disable the use of the OIDC discovery mechanism
# to discover endpoints. Defaults to true.
#
# issuer: Required. The OIDC issuer. Used to validate tokens and (if discovery
# is enabled) to discover the provider's endpoints.
#
# client_id: Required. oauth2 client id to use.
#
# client_secret: Required. oauth2 client secret to use.
#
# client_auth_method: auth method to use when exchanging the token. Valid
# values are 'client_secret_basic' (default), 'client_secret_post' and
# 'none'.
#
# scopes: list of scopes to request. This should normally include the "openid"
# scope. Defaults to ["openid"].
#
# authorization_endpoint: the oauth2 authorization endpoint. Required if
# provider discovery is disabled.
#
# token_endpoint: the oauth2 token endpoint. Required if provider discovery is
# disabled.
#
# userinfo_endpoint: the OIDC userinfo endpoint. Required if discovery is
# disabled and the 'openid' scope is not requested.
#
# jwks_uri: URI where to fetch the JWKS. Required if discovery is disabled and
# the 'openid' scope is used.
#
# skip_verification: set to 'true' to skip metadata verification. Use this if
# you are connecting to a provider that is not OpenID Connect compliant.
# Defaults to false. Avoid this in production.
#
# user_profile_method: Whether to fetch the user profile from the userinfo
# endpoint. Valid values are: 'auto' or 'userinfo_endpoint'.
#
# Defaults to 'auto', which fetches the userinfo endpoint if 'openid' is
# included in 'scopes'. Set to 'userinfo_endpoint' to always fetch the
# userinfo endpoint.
#
# allow_existing_users: set to 'true' to allow a user logging in via OIDC to
# match a pre-existing account instead of failing. This could be used if
# switching from password logins to OIDC. Defaults to false.
#
# user_mapping_provider: Configuration for how attributes returned from a OIDC
# provider are mapped onto a matrix user. This setting has the following
# sub-properties:
#
# module: The class name of a custom mapping module. Default is
# 'synapse.handlers.oidc_handler.JinjaOidcMappingProvider'.
# See https://github.com/matrix-org/synapse/blob/master/docs/sso_mapping_providers.md#openid-mapping-providers
# for information on implementing a custom mapping provider.
#
# config: Configuration for the mapping provider module. This section will
# be passed as a Python dictionary to the user mapping provider
# module's `parse_config` method.
#
# For the default provider, the following settings are available:
#
# sub: name of the claim containing a unique identifier for the
# user. Defaults to 'sub', which OpenID Connect compliant
# providers should provide.
#
# localpart_template: Jinja2 template for the localpart of the MXID.
# If this is not set, the user will be prompted to choose their
# own username.
#
# display_name_template: Jinja2 template for the display name to set
# on first login. If unset, no displayname will be set.
#
# extra_attributes: a map of Jinja2 templates for extra attributes
# to send back to the client during login.
# Note that these are non-standard and clients will ignore them
# without modifications.
#
# When rendering, the Jinja2 templates are given a 'user' variable,
# which is set to the claims returned by the UserInfo Endpoint and/or
# in the ID Token.
#
# See https://github.com/matrix-org/synapse/blob/master/docs/openid.md
# for information on how to configure these options.
#
# For backwards compatibility, it is also possible to configure a single OIDC
# provider via an 'oidc_config' setting. This is now deprecated and admins are
# advised to migrate to the 'oidc_providers' format. (When doing that migration,
# use 'oidc' for the idp_id to ensure that existing users continue to be
# recognised.)
#
oidc_providers:
# Generic example
#
#- idp_id: my_idp
# idp_name: "My OpenID provider"
# idp_icon: "mxc://example.com/mediaid"
# discover: false
# issuer: "https://accounts.example.com/"
# client_id: "provided-by-your-issuer"
# client_secret: "provided-by-your-issuer"
# client_auth_method: client_secret_post
# scopes: ["openid", "profile"]
# authorization_endpoint: "https://accounts.example.com/oauth2/auth"
# token_endpoint: "https://accounts.example.com/oauth2/token"
# userinfo_endpoint: "https://accounts.example.com/userinfo"
# jwks_uri: "https://accounts.example.com/.well-known/jwks.json"
# skip_verification: true
# For use with Keycloak
#
#- idp_id: keycloak
# idp_name: Keycloak
# issuer: "https://127.0.0.1:8443/auth/realms/my_realm_name"
# client_id: "synapse"
# client_secret: "copy secret generated in Keycloak UI"
# scopes: ["openid", "profile"]
# For use with Github
#
#- idp_id: github
# idp_name: Github
# discover: false
# issuer: "https://github.com/"
# client_id: "your-client-id" # TO BE FILLED
# client_secret: "your-client-secret" # TO BE FILLED
# authorization_endpoint: "https://github.com/login/oauth/authorize"
# token_endpoint: "https://github.com/login/oauth/access_token"
# userinfo_endpoint: "https://api.github.com/user"
# scopes: ["read:user"]
# user_mapping_provider:
# config:
# subject_claim: "id"
# localpart_template: "{ user.login }"
# display_name_template: "{ user.name }"
# Enable Central Authentication Service (CAS) for registration and login.
#
cas_config:
# Uncomment the following to enable authorization against a CAS server.
# Defaults to false.
#
#enabled: true
# Uncomment the following to disable use of the OIDC discovery mechanism to
# discover endpoints. Defaults to true.
# The URL of the CAS authorization endpoint.
#
#discover: false
#server_url: "https://cas-server.com"
# the OIDC issuer. Used to validate tokens and (if discovery is enabled) to
# discover the provider's endpoints.
# The public URL of the homeserver.
#
# Required if 'enabled' is true.
#service_url: "https://homeserver.domain.com:8448"
# The attribute of the CAS response to use as the display name.
#
#issuer: "https://accounts.example.com/"
# oauth2 client id to use.
# If unset, no displayname will be set.
#
# Required if 'enabled' is true.
#displayname_attribute: name
# It is possible to configure Synapse to only allow logins if CAS attributes
# match particular values. All of the keys in the mapping below must exist
# and the values must match the given value. Alternately if the given value
# is None then any value is allowed (the attribute just must exist).
# All of the listed attributes must match for the login to be permitted.
#
#client_id: "provided-by-your-issuer"
# oauth2 client secret to use.
#
# Required if 'enabled' is true.
#
#client_secret: "provided-by-your-issuer"
# auth method to use when exchanging the token.
# Valid values are 'client_secret_basic' (default), 'client_secret_post' and
# 'none'.
#
#client_auth_method: client_secret_post
# list of scopes to request. This should normally include the "openid" scope.
# Defaults to ["openid"].
#
#scopes: ["openid", "profile"]
# the oauth2 authorization endpoint. Required if provider discovery is disabled.
#
#authorization_endpoint: "https://accounts.example.com/oauth2/auth"
# the oauth2 token endpoint. Required if provider discovery is disabled.
#
#token_endpoint: "https://accounts.example.com/oauth2/token"
# the OIDC userinfo endpoint. Required if discovery is disabled and the
# "openid" scope is not requested.
#
#userinfo_endpoint: "https://accounts.example.com/userinfo"
# URI where to fetch the JWKS. Required if discovery is disabled and the
# "openid" scope is used.
#
#jwks_uri: "https://accounts.example.com/.well-known/jwks.json"
# Uncomment to skip metadata verification. Defaults to false.
#
# Use this if you are connecting to a provider that is not OpenID Connect
# compliant.
# Avoid this in production.
#
#skip_verification: true
# An external module can be provided here as a custom solution to mapping
# attributes returned from a OIDC provider onto a matrix user.
#
user_mapping_provider:
# The custom module's class. Uncomment to use a custom module.
# Default is 'synapse.handlers.oidc_handler.JinjaOidcMappingProvider'.
#
# See https://github.com/matrix-org/synapse/blob/master/docs/sso_mapping_providers.md#openid-mapping-providers
# for information on implementing a custom mapping provider.
#
#module: mapping_provider.OidcMappingProvider
# Custom configuration values for the module. This section will be passed as
# a Python dictionary to the user mapping provider module's `parse_config`
# method.
#
# The examples below are intended for the default provider: they should be
# changed if using a custom provider.
#
config:
# name of the claim containing a unique identifier for the user.
# Defaults to `sub`, which OpenID Connect compliant providers should provide.
#
#subject_claim: "sub"
# Jinja2 template for the localpart of the MXID.
#
# When rendering, this template is given the following variables:
# * user: The claims returned by the UserInfo Endpoint and/or in the ID
# Token
#
# This must be configured if using the default mapping provider.
#
#localpart_template: "<{ user.preferred_username }>"
# Jinja2 template for the display name to set on first login.
#
# If unset, no displayname will be set.
#
#display_name_template: "<{ user.given_name }> <{ user.last_name }>"
# Enable CAS for registration and login.
#
#cas_config:
# enabled: true
# server_url: "https://cas-server.com"
# service_url: "https://homeserver.domain.com:8448"
# #displayname_attribute: name
# #required_attributes:
# # name: value
#required_attributes:
# userGroup: "staff"
# department: None
# Additional settings to use with single-sign on systems such as OpenID Connect,
@ -1741,9 +1899,9 @@ sso:
# phishing attacks from evil.site. To avoid this, include a slash after the
# hostname: "https://my.client/".
#
# If public_baseurl is set, then the login fallback page (used by clients
# that don't natively support the required login flows) is whitelisted in
# addition to any URLs in this list.
# The login fallback page (used by clients that don't natively support the
# required login flows) is automatically whitelisted in addition to any URLs
# in this list.
#
# By default, this list is empty.
#
@ -1752,14 +1910,36 @@ sso:
# - https://my.custom.client/
# Directory in which Synapse will try to find the template files below.
# If not set, default templates from within the Synapse package will be used.
#
# DO NOT UNCOMMENT THIS SETTING unless you want to customise the templates.
# If you *do* uncomment it, you will need to make sure that all the templates
# below are in the directory.
# If not set, or the files named below are not found within the template
# directory, default templates from within the Synapse package will be used.
#
# Synapse will look for the following templates in this directory:
#
# * HTML page to prompt the user to choose an Identity Provider during
# login: 'sso_login_idp_picker.html'.
#
# This is only used if multiple SSO Identity Providers are configured.
#
# When rendering, this template is given the following variables:
# * redirect_url: the URL that the user will be redirected to after
# login. Needs manual escaping (see
# https://jinja.palletsprojects.com/en/2.11.x/templates/#html-escaping).
#
# * server_name: the homeserver's name.
#
# * providers: a list of available Identity Providers. Each element is
# an object with the following attributes:
# * idp_id: unique identifier for the IdP
# * idp_name: user-facing name for the IdP
#
# The rendered HTML page should contain a form which submits its results
# back as a GET request, with the following query parameters:
#
# * redirectUrl: the client redirect URI (ie, the `redirect_url` passed
# to the template)
#
# * idp: the 'idp_id' of the chosen IDP.
#
# * HTML page for a confirmation step before redirecting back to the client
# with the login token: 'sso_redirect_confirm.html'.
#
@ -1795,6 +1975,14 @@ sso:
#
# This template has no additional variables.
#
# * HTML page shown after a user-interactive authentication session which
# does not map correctly onto the expected user: 'sso_auth_bad_user.html'.
#
# When rendering, this template is given the following variables:
# * server_name: the homeserver's name.
# * user_id_to_verify: the MXID of the user that we are trying to
# validate.
#
# * HTML page shown during single sign-on if a deactivated user (according to Synapse's database)
# attempts to login: 'sso_account_deactivated.html'.
#
@ -1824,7 +2012,7 @@ sso:
# and issued at ("iat") claims are validated if present.
#
# Note that this is a non-standard login type and client support is
# expected to be non-existant.
# expected to be non-existent.
#
# See https://github.com/matrix-org/synapse/blob/master/docs/jwt.md.
#
@ -1920,6 +2108,21 @@ password_config:
#
#require_uppercase: true
ui_auth:
# The number of milliseconds to allow a user-interactive authentication
# session to be active.
#
# This defaults to 0, meaning the user is queried for their credentials
# before every action, but this can be overridden to alow a single
# validation to be re-used. This weakens the protections afforded by
# the user-interactive authentication process, by allowing for multiple
# (and potentially different) operations to use the same validation session.
#
# Uncomment below to allow for credential validation to last for 15
# seconds.
#
#session_timeout: 15000
# Configuration for sending emails from Synapse.
#
@ -1985,12 +2188,15 @@ email:
#
#validation_token_lifetime: 15m
# Directory in which Synapse will try to find the template files below.
# If not set, default templates from within the Synapse package will be used.
# The web client location to direct users to during an invite. This is passed
# to the identity server as the org.matrix.web_client_location key. Defaults
# to unset, giving no guidance to the identity server.
#
# DO NOT UNCOMMENT THIS SETTING unless you want to customise the templates.
# If you *do* uncomment it, you will need to make sure that all the templates
# below are in the directory.
#invite_client_location: https://app.element.io
# Directory in which Synapse will try to find the template files below.
# If not set, or the files named below are not found within the template
# directory, default templates from within the Synapse package will be used.
#
# Synapse will look for the following templates in this directory:
#
@ -2003,9 +2209,13 @@ email:
# * The contents of password reset emails sent by the homeserver:
# 'password_reset.html' and 'password_reset.txt'
#
# * HTML pages for success and failure that a user will see when they follow
# the link in the password reset email: 'password_reset_success.html' and
# 'password_reset_failure.html'
# * An HTML page that a user will see when they follow the link in the password
# reset email. The user will be asked to confirm the action before their
# password is reset: 'password_reset_confirmation.html'
#
# * HTML pages for success and failure that a user will see when they confirm
# the password reset flow using the page above: 'password_reset_success.html'
# and 'password_reset_failure.html'
#
# * The contents of address verification emails sent during registration:
# 'registration.html' and 'registration.txt'
@ -2107,6 +2317,7 @@ email:
# respectively.
#
password_providers:
# # Example config for an LDAP auth provider
- module: "ldap_auth_provider.LdapAuthProvider"
config:
enabled: true
@ -2123,20 +2334,35 @@ password_providers:
# Clients requesting push notifications can either have the body of
# the message sent in the notification poke along with other details
# like the sender, or just the event ID and room ID (`event_id_only`).
# If clients choose the former, this option controls whether the
# notification request includes the content of the event (other details
# like the sender are still included). For `event_id_only` push, it
# has no effect.
#
# For modern android devices the notification content will still appear
# because it is loaded by the app. iPhone, however will send a
# notification saying only that a message arrived and who it came from.
#
#push:
# include_content: true
## Push ##
push:
# Clients requesting push notifications can either have the body of
# the message sent in the notification poke along with other details
# like the sender, or just the event ID and room ID (`event_id_only`).
# If clients choose the former, this option controls whether the
# notification request includes the content of the event (other details
# like the sender are still included). For `event_id_only` push, it
# has no effect.
#
# For modern android devices the notification content will still appear
# because it is loaded by the app. iPhone, however will send a
# notification saying only that a message arrived and who it came from.
#
# The default value is "true" to include message details. Uncomment to only
# include the event ID and room ID in push notification payloads.
#
#include_content: false
# When a push notification is received, an unread count is also sent.
# This number can either be calculated as the number of unread messages
# for the user, or the number of *rooms* the user has unread messages in.
#
# The default value is "true", meaning push clients will see the number of
# rooms with unread messages in them. Uncomment to instead send the number
# of unread messages.
#
#group_unread_count_by_room: false
# Spam checkers are third-party modules that can block specific actions
@ -2179,7 +2405,7 @@ spam_checker:
# If enabled, non server admins can only create groups with local parts
# starting with this prefix
#
#group_creation_prefix: "unofficial/"
#group_creation_prefix: "unofficial_"
@ -2337,7 +2563,7 @@ spam_checker:
#
# Options for the rules include:
#
# user_id: Matches agaisnt the creator of the alias
# user_id: Matches against the creator of the alias
# room_id: Matches against the room ID being published
# alias: Matches against any current local or canonical aliases
# associated with the room
@ -2383,7 +2609,7 @@ opentracing:
# This is a list of regexes which are matched against the server_name of the
# homeserver.
#
# By defult, it is empty, so no servers are matched.
# By default, it is empty, so no servers are matched.
#
#homeserver_whitelist:
# - ".*"
@ -2439,6 +2665,18 @@ opentracing:
# events: worker1
# typing: worker1
# The worker that is used to run background tasks (e.g. cleaning up expired
# data). If not provided this defaults to the main process.
#
#run_background_tasks_on: worker1
# A shared secret used by the replication APIs to authenticate HTTP requests
# from workers.
#
# By default this is unused and traffic is not authenticated.
#
#worker_replication_secret: ""
# Configuration for Redis when using workers. This *must* be enabled when
# using workers (unless using old style direct TCP configuration).