sprinterfreak/mibs-downloader
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a283dbbe0a
mibs-downloader/mibs/ATM-RMON-MIB.mib

2272 lines
83 KiB
Plaintext
Raw Normal View History

Added MIB-Source circitor.fr and cleaned up broken MIB files
2018-05-19 23:38:39 +02:00
-- *****************************************************************
-- ATM-RMON MIB
--
-- Feb 1997, Andy Bierman
--
-- Copyright (c) 1996-1997 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
-- This mib was extracted from an ATM Forum Draft.
-- It currently uses a ciscoExperiment number.
ATM-RMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
Counter64, Gauge32, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, DisplayString,
TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex, OwnerString
FROM IF-MIB
ciscoExperiment
FROM CISCO-SMI;
-- This TC is not imported from the RMON MIB because that MIB is on
-- the SNMPv1-only list, not compiled with SNMPv2 SMI
-- It's imported from IF-MIB just so this MIB will compile
-- since IF-MIB must be included for ifIndex
--
-- OwnerString
-- FROM RMON-MIB
--
-- These TCs are not imported from RMON-2, because our tools
-- would not compile RMON-2 and RMON-1 together, and the Token Ring
-- RMON MIB must also be imported by RMON-2
--
-- ZeroBasedCounter32, LastCreateTime
-- FROM RMON2-MIB
--
-- This TC is not imported from the CISCO-ATM-ADDR-MIB.my, or
-- the AtomMIB WG ATM-TC-MIB. This copy will change when the
-- ATM-TC-MIB is standardized.
--
-- AtmAddr
-- FROM ATM-TC-MIB;
--
-- Remote Network Monitoring MIB for ATM Networks
atmRmon MODULE-IDENTITY
LAST-UPDATED "9701240000Z"
ORGANIZATION "IETF" -- should this be Cisco instead?
CONTACT-INFO
"Andy Bierman
Cisco Systems, Inc.
Phone: +1 408 527-3711
Email: abierman@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
Phone: +1 408 526-5260
Email: kzm@cisco.com"
DESCRIPTION
"The MIB module for managing remote monitoring device
implementations for ATM networks."
::= { ciscoExperiment 16 }
-- ATM-RMON MIB groups
atmRmonMIBObjects OBJECT IDENTIFIER ::= { atmRmon 1 }
atmRmonNotifications OBJECT IDENTIFIER ::= { atmRmon 2 }
atmRmonConformance OBJECT IDENTIFIER ::= { atmRmon 3 }
-- ATM-RMON MIB object groups
portSelect OBJECT IDENTIFIER ::= { atmRmonMIBObjects 1 }
atmStats OBJECT IDENTIFIER ::= { atmRmonMIBObjects 2 }
atmHost OBJECT IDENTIFIER ::= { atmRmonMIBObjects 3 }
atmMatrix OBJECT IDENTIFIER ::= { atmRmonMIBObjects 4 }
-- cisco extensions
atmConfig OBJECT IDENTIFIER ::= { atmRmonMIBObjects 5 }
-- Textual Conventions:
-- temp: copied from RMON-2:
ZeroBasedCounter32 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object which counts events with the
following semantics: objects of this type will be set to
zero(0) on creation and will thereafter count appropriate
events, wrapping back to zero(0) when the value 2^32 is
reached.
Provided that an application discovers the new object within
the minimum time to wrap it can use the initial value as a
delta since it last polled the table of which this object is
part. It is important for a management station to be aware of
this minimum time and the actual time between polls, and to
discard data if the actual time is too long or there is no
defined minimum time.
Typically this TC is used in tables where the INDEX space is
constantly changing and/or the TimeFilter mechanism is in use."
SYNTAX Gauge32
-- temp: copied from RMON-2
LastCreateTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object that stores the last time its
entry was created.
This can be used for polling applications to determine that an
entry has been deleted and re-created between polls, causing
an otherwise undetectable discontinuity in the data."
SYNTAX TimeTicks
-- temp: copied from the ATM-TC-MIB
AtmAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity. The
address types are: no address (0 octets), E.164 (8
octets), network prefix (13 octets), and NSAP (20
octets). Note: The E.164 address is encoded in
BCD format."
SYNTAX OCTET STRING (SIZE(0|8|13|20))
ServiceClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object that identifies the cell
delivery class-of-service classification, associated with a
particular statistics collection. In order to conserve
agent resources, the classifications are limited to two
enumerations which distinguish delay-guarantee.
Statistics gathered on behalf on collections identified by
the 'cbrAndVbr(1)' enumeration represent constant-bit-rate
(CBR), real-time and non-real-time variable bit rate (VBR)
traffic.
Statistics gathered on behalf on collections identified by
the 'abrAndUbr(2)' enumeration represent available-bit-rate
(ABR) and unspecified-bit-rate (UBR) traffic."
SYNTAX INTEGER {
cbrAndVbr(1), -- constant and variable bit rate
abrAndUbr(2) -- available and unspecified bit rate
}
ResourcePriority ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object which indicates the desired
resource priority of the entire entry. Lower priorities
indicate a lesser requirement to retain resources than
higher priority values.
A management station can use the resource priority to
provide a probe with additional information for managing
memory allocation. A probe is strongly encouraged, but not
required, to honor all priority requests, all of the time.
Objects declared with this TC should be contained within a
conceptual control table entry. The indicated resource
priority applies to the control entry, all internal data
structures maintained on behalf of the control entry, and
all external MIB data represented by the control entry.
A probe should honor the priority requests in an
implementation-dependent way. The data allocation
granularity (i.e., shared data structures) may vary greatly
for different implementations, so a particular
implementation strategy is not mandated. However, the
following guidelines are suggested for those agents which
implement garbage-collection based on 'least-recently used'
(LRU) or other criteria:
In the event that the probe runs short of resources, and
data entries are to be removed from particular tables to
reclaim resources, then entries associated with lower
ResourcePriority values should be deleted before entries
associated with higher ResourcePriority values, regardless
of the resource reclamation algorithm in use. In addition,
entries associated with a higher AddressCollectScope value
should be deleted before entries with a lower
AddressCollectScope value.
Note that the priority ordering of entries with the same
ResourcePriority and addressCollectScope values is
unspecified."
SYNTAX INTEGER {
lowPriority(1),
normalPriority(2),
highPriority(3)
}
AddressCollectScope ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object which indicates the granularity
of the addresses represented in associated ATM-RMON
collections.
Addresses gathered on behalf of collections identified by
the 'prefix(1)' enumeration will be cleared to zero in bytes
13 through 20, for indexing and counting purposes.
Addresses gathered on behalf of collections identified by
the 'prefixAndEsi(2)' enumeration will be cleared to zero in
byte 20, for indexing and counting purposes.
Addresses gathered on behalf of collections identified by
the 'entireAddr(3)' enumeration will be unmodified, for
indexing and counting purposes."
SYNTAX INTEGER {
prefix(1),
prefixAndEsi(2),
entireAddr(3)
}
ConnectTime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an object which indicates the sum of the
elapsed times of all connections associated with a
particular collection. This is a cumulative total and
includes all connections which currently exist and all
connections which have been released.
Elapsed connection time begins when the call attempt is
detected, and ends when the call is released. It is an
implementation-specific matter whether call attempts which
do not result in successful connections are represented in
this total.
Call duration is maintained in units of seconds, and are
rounded to the nearest second when counted."
SYNTAX Gauge32
--
-- Port Selection (portSelect Group)
--
-- Defines the ports to be included or excluded in
-- a particular stats, host or matrix collection
--
-- portSelGrpTable
-- portSelTable
portSelGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSelGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Controls the setup of port and ATM connection selection
criteria used on behalf of any collection associated with
entries in this table (e.g., atmHostTable).
This table allows portSelTable entries with the same value
of the portSelCollectGroup object to be grouped together to
form port select groups.
Note that an agent implementation may restrict the actual
number of portSelGrp entries, due to resource limitations."
::= { portSelect 1 }
portSelGrpEntry OBJECT-TYPE
SYNTAX PortSelGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the portSelGrpTable.
An example of the indexing of this entry is
portSelGrpCreateTime.7 ."
INDEX { portSelGrpIndex }
::= { portSelGrpTable 1 }
PortSelGrpEntry ::= SEQUENCE {
portSelGrpIndex Integer32,
portSelGrpDescr DisplayString,
portSelGrpCreateTime LastCreateTime,
portSelGrpOwner OwnerString,
portSelGrpStatus RowStatus
}
portSelGrpIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary and unique index for this portSelGrpEntry. If
portSelGrpTable entries are recreated by the agent after a
restart, then the portSelGrpIndex value must be retained
across a restart as well."
::= { portSelGrpEntry 1 }
portSelGrpDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An administratively-assigned descriptive label for this
portSelGrp entry."
::= { portSelGrpEntry 2 }
portSelGrpCreateTime OBJECT-TYPE
SYNTAX LastCreateTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this portSelGrp entry was
activated. This can be used by the management station to
ensure that the table has not been deleted and recreated
between polls."
::= { portSelGrpEntry 3 }
portSelGrpOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { portSelGrpEntry 4 }
portSelGrpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. No objects
are required to be written prior to the row being set to
active(1). However, all portSelTable entries which are to
be included in collections on behalf of this
portSelectGroup, must be completely configured and activated
before this object is set to active(1), since the associated
instances of portSelStatus cannot be modified once this
object has been set to active(1).
If this object is not equal to active(1), all associated
data collections shall be deleted (e.g., any associated
collections in the atmStats, atmHostTable or
atmMatrixSDTable).
Note that associated portSelTable and any configured
collection control entries (e.g., atmHostControlTable) are
not deleted when this entry leaves the active state."
::= { portSelGrpEntry 5 }
--
-- portSelTable: used to specify the collection configuration
-- for a single ATM port
--
portSelTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Controls the setup of selection criteria for a single ATM
port, used on behalf of any collections identified with the
associated portSelectGroup (identified by its
portSelGrpIndex value).
This table identifies the collection characteristics for the
ATM port indicated by the ifIndex value in the index.
Note that an agent implementation may restrict the actual
number of portSelTable entries, due to resource
limitations."
::= { portSelect 2 }
portSelEntry OBJECT-TYPE
SYNTAX PortSelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the portSelTable.
Entries may only be created on behalf of ATM interfaces.
That is, the ifType value associated with each ifIndex value
must be equal to atm(37) or atmLogicalPort(80).
An example of the indexing of this entry is
portSelCreateTime.7 ."
INDEX { ifIndex }
::= { portSelTable 1 }
PortSelEntry ::= SEQUENCE {
portSelCollectGroup Integer32,
portSelCreateTime LastCreateTime,
portSelOwner OwnerString,
portSelStatus RowStatus
Initial push
2018-02-08 05:36:33 +01:00
}
Added MIB-Source circitor.fr and cleaned up broken MIB files
2018-05-19 23:38:39 +02:00
portSelCollectGroup OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the associated instance of
portSelGrpIndex, which indicates the portSelectGroup to
which this port is assigned.
This object may not be modified if the associated instance
of portSelStatus is equal to active(1)."
::= { portSelEntry 1 }
portSelCreateTime OBJECT-TYPE
SYNTAX LastCreateTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
table has not been deleted and recreated between polls."
::= { portSelEntry 2 }
portSelOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { portSelEntry 3 }
portSelStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Specifically, an appropriate value for the
portSelCollectGroup object must be set before this object
may be set to active(1). An agent may wish to allow
portSelTable entries to exist which reference non-existent
portSelGrpTable entries, in order to reduce row creation
order dependencies.
All portSelTable entries which are to be included in a
particular collection (as indicated by the
portSelCollectGroup object), should be completely configured
and activated before the associated portSelGrpStatus object
is set to active(1). Configuration of a portSelectGroup
cannot be modified once collections on its behalf have been
started.
This object may not be modified if the associated
portSelGroupStatus in in the active(1) state, indicated by a
portSelGrpIndex value identical to the value of the
portSelCollectGroup object in this entry."
::= { portSelEntry 4 }
--
-- ATM Stats Group
--
-- Counts the total amount of traffic
-- counted on behalf of one or more portSelectGroups
atmStatsControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmStatsControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ATM basic statistic collection table control
entries. These entries will enable the collection of
statistical totals for an entire portSelectGroup."
::= { atmStats 1 }
atmStatsControlEntry OBJECT-TYPE
SYNTAX AtmStatsControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmStatsControlTable. Entries in
this table are identified and indexed by the portSelGrpIndex
object. At most one atmStats collection is done per
portSelectGroup.
An example of the indexing of this entry is
atmStatsDropEvents.1 ."
INDEX { portSelGrpIndex }
::= { atmStatsControlTable 1 }
AtmStatsControlEntry ::= SEQUENCE {
atmStatsControlDropEvents Counter32,
atmStatsControlOwner OwnerString,
atmStatsControlStatus RowStatus
Initial push
2018-02-08 05:36:33 +01:00
}
Added MIB-Source circitor.fr and cleaned up broken MIB files
2018-05-19 23:38:39 +02:00
atmStatsControlDropEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events in which cells which should have
been counted in the associated atmStatsEntry, but were
dropped by the probe due to lack of resources. Note that
this number is not necessarily the number of cells or calls
dropped; it is just the number of times this condition has
been detected."
::= { atmStatsControlEntry 1 }
atmStatsControlOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { atmStatsControlEntry 2 }
atmStatsControlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this atmStatsControlEntry.
This control entry may be created and destroyed
independently of the associated portSelGrpEntry, however its
associated atmStatsTable can exist only when the
portSelGrpEntry controlling this collection is active.
If this object is not equal to active(1), all associated
entries in the atmStatsTable shall be deleted."
::= { atmStatsControlEntry 3 }
-- atmStatsTable
-- call and traffic basic statistics collected on behalf of specific
-- portSelectGroups
atmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistical totals for all ATM addresses
that have been discovered on behalf of the portSelectGroup
associated with this entry."
::= { atmStats 2 }
atmStatsEntry OBJECT-TYPE
SYNTAX AtmStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmStatsTable.
The portSelGrpIndex value in the index identifies the
portSelectGroup on whose behalf this entry was created.
An example of the indexing of this entry is
atmStatsCells.8.1"
INDEX { portSelGrpIndex, atmStatsSClass }
::= { atmStatsTable 1 }
AtmStatsEntry ::= SEQUENCE {
atmStatsSClass ServiceClass,
atmStatsCreateTime LastCreateTime,
atmStatsCells Counter32,
atmStatsCellsRollovers Counter32,
atmStatsHCCells Counter64,
atmStatsNumCallAttempts Counter32,
atmStatsNumCalls Counter32,
atmStatsConnTime ConnectTime
}
atmStatsSClass OBJECT-TYPE
SYNTAX ServiceClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values."
::= { atmStatsEntry 1 }
atmStatsCreateTime OBJECT-TYPE
SYNTAX LastCreateTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this entry was created. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls."
::= { atmStatsEntry 2 }
atmStatsCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of error-free cells detected on all ATM
connections on behalf of this portSelectGroup collection.
Note that a particular cell may only cause this counter to
increment once, even if multiple criteria is met for
inclusion in this portSelectGroup."
::= { atmStatsEntry 3 }
atmStatsCellsRollovers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the associated instance of the
atmStatsCells object has transitioned from the value 2^^32-1
to zero."
::= { atmStatsEntry 4 }
atmStatsHCCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high capacity version of the atmStatsCells object."
::= { atmStatsEntry 5 }
atmStatsNumCallAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of call attempts detected on all signalled ATM
connections on behalf of this portSelectGroup collection. A
probe should increment this counter each time a connection
setup attempt (identified with this portSelectGroup) is
detected. For point-to-multipoint connections, this counter
is incremented once per counted connection, regardless of
the number of leafs identified in the connection."
::= { atmStatsEntry 6 }
atmStatsNumCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully established calls detected on
all signalled ATM connections on behalf of this
portSelectGroup collection. Note that this value includes
successfully established calls that are currently in
progress. A probe should increment this counter each time a
valid connection (identified with this portSelectGroup) is
successfully established. For point-to-multipoint ATM
connections, this counter is incremented once per counted
connection, regardless of the number of leafs identified in
the connection. Note that when a point-to-point connection
setup enters on one port and leaves on another port in the
same port select group, it is counted only once."
::= { atmStatsEntry 7 }
atmStatsConnTime OBJECT-TYPE
SYNTAX ConnectTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of all calls identified by the associated
instance of the atmStatsNumCallAttempts object. Note that
point-to-multipoint calls are counted only once, regardless
of the number of leafs participating in the call."
::= { atmStatsEntry 8 }
--
-- ATM Host Group
--
-- Counts the amount of traffic sent on behalf of each ATM address
-- discovered by the probe, according to associated portSelectGroup
-- criteria
atmHostControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmHostControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ATM host table control entries.
These entries will enable the collection of ATM host
information in the atmHostTable.
Entries in the atmHostTable will be created on behalf of
each entry in this table. A probe is required to support at
most one atmHost collection per instance of an associated
portSelectGroup, therefore the table is indexed by the
portSelGrpIndex."
::= { atmHost 1 }
atmHostControlEntry OBJECT-TYPE
SYNTAX AtmHostControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmHostControlTable. Entries in
this table are identified and indexed by the portSelGrpIndex
object. At most one atmHost collection is done per
portSelectGroup.
An example of the indexing of this entry is
atmHostControlInserts.1"
INDEX { portSelGrpIndex }
::= { atmHostControlTable 1 }
AtmHostControlEntry ::= SEQUENCE {
atmHostControlInserts Counter32,
atmHostControlDeletes Counter32,
atmHostControlMaxDesiredEntries Integer32,
atmHostControlPriority ResourcePriority,
atmHostControlAddrCollectScope AddressCollectScope,
atmHostControlDropEvents Counter32,
atmHostControlOwner OwnerString,
atmHostControlStatus RowStatus
}
atmHostControlInserts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an atmHost entry has been inserted into
the atmHost table. If an entry is inserted, then deleted,
and then inserted, this counter will be incremented by 2.
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmHostControlDeletes from atmHostControlInserts."
::= { atmHostControlEntry 1 }
atmHostControlDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an atmHost entry has been deleted from
the atmHost table (for any reason). If an entry is deleted,
then inserted, and then deleted, this counter will be
incremented by 2.
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmHostControlDeletes from atmHostControlInserts."
::= { atmHostControlEntry 2 }
atmHostControlMaxDesiredEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of entries that are desired in the
atmHostTable on behalf of this control entry. The probe will
not create more than this number of associated entries in
the table, but may choose to create fewer entries in this
table for any reason including the lack of resources.
If this value is set to -1, the probe may create any number
of entries in this table.
If the associated instance of atmHostControlStatus object is
equal to active(1), this object may not be modified."
DEFVAL { -1 }
::= { atmHostControlEntry 3 }
atmHostControlPriority OBJECT-TYPE
SYNTAX ResourcePriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority this collection should be given to retain
resources, in the event the probe must reclaim some
resources in order to add new entries to an existing atmHost
collection or add new collections of other types.
If the associated instance of atmHostControlStatus object is
equal to active(1), this object may not be modified."
DEFVAL { normalPriority }
::= { atmHostControlEntry 4 }
atmHostControlAddrCollectScope OBJECT-TYPE
SYNTAX AddressCollectScope
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the granularity of address collection
in atmHostTable entries created on behalf of this control
entry, according to the rules specified by the
AddressCollectScope textual convention.
If the associated instance of atmHostControlStatus object is
equal to active(1), this object may not be modified."
DEFVAL { prefixAndEsi }
::= { atmHostControlEntry 5 }
atmHostControlDropEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events in which cells which should have
been counted in the associated atmHostEntry, but were
dropped by the probe due to lack of resources. Note that
this number is not necessarily the number of cells or calls
dropped; it is just the number of times this condition has
been detected."
::= { atmHostControlEntry 6 }
atmHostControlOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { atmHostControlEntry 7 }
atmHostControlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this atmHostControlEntry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Specifically, appropriate values for the associated
instances of atmHostControlMaxDesiredEntries,
atmHostControlPriority, and atmHostControlAddrCollectScope
must be set before this object may be set to active(1).
This control entry may be created and destroyed
independently of the associated portSelGrpEntry, however its
associated atmHostTable can exist only when the
portSelGrpEntry controlling this collection is active.
If this object is not equal to active(1), all associated
entries in the atmHostTable shall be deleted."
::= { atmHostControlEntry 8 }
--
-- ATM Host Table
--
atmHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics for a particular ATM host
address that has been discovered on behalf of the
portSelectGroup associated with this entry.
The probe will add to this table all addresses seen as the
source or destination address in all calls, on all ports
configured in the portSelGrpEntry controlling this
collection."
::= { atmHost 2 }
atmHostEntry OBJECT-TYPE
SYNTAX AtmHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmHostTable.
The portSelGrpIndex value in the index identifies the
portSelectGroup on whose behalf this entry was created.
An example of the indexing of this entry is
atmHostInCells.4.20.<NSAP>.2"
INDEX { portSelGrpIndex, atmHostAddress, atmHostSClass }
::= { atmHostTable 1 }
AtmHostEntry ::= SEQUENCE {
atmHostAddress AtmAddr,
atmHostSClass ServiceClass,
atmHostCreateTime LastCreateTime,
atmHostInCells ZeroBasedCounter32,
atmHostInCellsRollovers ZeroBasedCounter32,
atmHostInHCCells Counter64,
atmHostOutCells ZeroBasedCounter32,
atmHostOutCellsRollovers ZeroBasedCounter32,
atmHostOutHCCells Counter64,
atmHostInNumCallAttempts ZeroBasedCounter32,
atmHostInNumCalls ZeroBasedCounter32,
atmHostOutNumCallAttempts ZeroBasedCounter32,
atmHostOutNumCalls ZeroBasedCounter32,
atmHostInConnTime ConnectTime,
atmHostOutConnTime ConnectTime
}
atmHostAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM address for this atmHostEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table."
::= { atmHostEntry 1 }
atmHostSClass OBJECT-TYPE
SYNTAX ServiceClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values."
::= { atmHostEntry 2 }
atmHostCreateTime OBJECT-TYPE
SYNTAX LastCreateTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls."
::= { atmHostEntry 3 }
atmHostInCells OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of error-free cells detected on ATM connections
associated with this portSelectGroup, in which this ATM
address was identified as the receiver address, or one of
the leaf addresses on a point-to-multipoint ATM connection."
::= { atmHostEntry 4 }
atmHostInCellsRollovers OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the associated instance of the
atmHostInCells object has transitioned from the value
2^^32-1 to zero."
::= { atmHostEntry 5 }
atmHostInHCCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high capacity version of the atmHostInCells object."
::= { atmHostEntry 6 }
atmHostOutCells OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of error-free cells detected on ATM connections
associated with this portSelectGroup, in which this ATM
address was identified as the sender address."
::= { atmHostEntry 7 }
atmHostOutCellsRollovers OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the associated instance of the
atmHostOutCells object has transitioned from the value
2^^32-1 to zero."
::= { atmHostEntry 8 }
atmHostOutHCCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high capacity version of the atmHostOutCells object."
::= { atmHostEntry 9 }
atmHostInNumCallAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls detected on ATM connections associated
with this entry, in which the associated endpoint address
was identified as the Called Party in an signalled ATM
connection establishment attempt.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which this ATM host is
identified as the Called Party, or one of the leaf addresses
for point-to-multipoint ATM connections."
::= { atmHostEntry 10 }
atmHostInNumCalls OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully established calls detected on
ATM connections associated with this entry, in which the
associated endpoint address was identified as the Called
Party address.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection is successfully established in which this ATM
host is identified as the Called Party address, or one of
the leaf addresses for point-to-multipoint ATM connections."
::= { atmHostEntry 11 }
atmHostOutNumCallAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls detected on ATM connections associated
with this entry, in which the associated endpoint address
was identified as the Calling Party in an signalled ATM
connection establishment attempt.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which this ATM host is
identified as the Calling Party.
Note that for point-to-multipoint ATM connections, this
counter is incremented only once per call, regardless of the
number of leafs established at setup time or the number of
leaf-initiated-join attempts since the call was
established."
::= { atmHostEntry 12 }
atmHostOutNumCalls OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully established calls detected on
ATM connections associated with this entry, in which the
associated endpoint address was identified as the Calling
Party address.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection is successfully established in which this ATM
host is identified as the Calling Party address."
::= { atmHostEntry 13 }
atmHostInConnTime OBJECT-TYPE
SYNTAX ConnectTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of all calls identified by the associated
instance of atmHostInNumCallAttempts."
::= { atmHostEntry 14 }
atmHostOutConnTime OBJECT-TYPE
SYNTAX ConnectTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of all calls identified by the associated
instance of atmHostOutNumCallAttempts."
::= { atmHostEntry 15 }
--
-- ATM Matrix Group
--
-- Counts the amount of traffic sent on behalf of each source
-- and destination ATM address discovered by the probe,
-- according to associated portSelectGroup criteria
atmMatrixControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmMatrixControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ATM matrix table control entries.
These entries will enable the collection of ATM matrix
information in the atmMatrixSDTable and atmMatrixDSTable.
A probe is required to support at most one atmMatrix
collection per instance of an associated portSelectGroup,
therefore the table is indexed by the portSelGrpIndex."
::= { atmMatrix 1 }
atmMatrixControlEntry OBJECT-TYPE
SYNTAX AtmMatrixControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmMatrixControlTable.
An example of the indexing of this entry is
atmMatrixControlInserts.1"
INDEX { portSelGrpIndex }
::= { atmMatrixControlTable 1 }
AtmMatrixControlEntry ::= SEQUENCE {
atmMatrixControlInserts Counter32,
atmMatrixControlDeletes Counter32,
atmMatrixControlMaxDesiredEntries Integer32,
atmMatrixControlPriority ResourcePriority,
atmMatrixControlAddrCollectScope AddressCollectScope,
atmMatrixControlDropEvents Counter32,
atmMatrixControlOwner OwnerString,
atmMatrixControlStatus RowStatus
}
atmMatrixControlInserts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an atmMatrix entry has been inserted
into the atmMatrix table. If an entry is inserted, then
deleted, and then inserted, this counter will be incremented
by 2. The addition of a conversation into both the
atmMatrixSDTable and atmMatrixDSTable shall be counted as
two insertions (even though every addition into one table
must be accompanied by an insertion into the other).
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmMatrixControlDeletes from atmMatrixControlInserts, and
dividing the result by two."
::= { atmMatrixControlEntry 1 }
atmMatrixControlDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an atmMatrix entry has been deleted
from the atmMatrix table (for any reason). If an entry is
deleted, then inserted, and then deleted, this counter will
be incremented by 2. The deletion of a conversation from
both the atmMatrixSDTable and atmMatrixDSTable shall be
counted as two deletions (even though every deletion from
one table must be accompanied by a deletion from the other).
To allow for efficient implementation strategies, agents may
delay updating this object for short periods of time. For
example, an implementation strategy may allow internal data
structures to differ from those visible via SNMP for short
periods of time. This counter may reflect the internal data
structures for those short periods of time.
Note that the table size can be determined by subtracting
atmMatrixControlDeletes from atmMatrixControlInserts, and
dividing the result by two."
::= { atmMatrixControlEntry 2 }
atmMatrixControlMaxDesiredEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of entries that are desired in the
atmMatrixTable on behalf of this control entry. The probe
will not create more than this number of associated entries
in the table, but may choose to create fewer entries in this
table for any reason including the lack of resources.
If this value is set to -1, the probe may create any number
of entries in this table.
If the associated instance of atmMatrixControlStatus object
is equal to active(1), this object may not be modified."
DEFVAL { -1 }
::= { atmMatrixControlEntry 3 }
atmMatrixControlPriority OBJECT-TYPE
SYNTAX ResourcePriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority this collection should be given to retain
resources, in the event the probe must reclaim some
resources in order to add new entries to an existing
atmMatrix collection or add new collections of other types.
If the associated instance of atmMatrixControlStatus object
is equal to active(1), this object may not be modified."
DEFVAL { normalPriority }
::= { atmMatrixControlEntry 4 }
atmMatrixControlAddrCollectScope OBJECT-TYPE
SYNTAX AddressCollectScope
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the granularity of address collection
in atmMatrixSDTable and atmMatrixDSTable entries created on
behalf of this control entry, according to the rules
specified by the AddressCollectScope textual convention.
If the associated instance of atmMatrixControlStatus object
is equal to active(1), this object may not be modified."
DEFVAL { prefixAndEsi }
::= { atmMatrixControlEntry 5 }
atmMatrixControlDropEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events in which cells which should have
been counted in the associated atmMatrixSDEntry and
atmMatrixDSEntry, but were dropped by the probe due to lack
of resources. Note that this number is not necessarily the
number of cells or calls dropped; it is just the number of
times this condition has been detected."
::= { atmMatrixControlEntry 6 }
atmMatrixControlOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { atmMatrixControlEntry 7 }
atmMatrixControlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this atmMatrixControlEntry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Specifically, the associated instances of
atmMatrixControlMaxDesiredEntries, atmMatrixControlPriority,
and atmMatrixControlAddrCollectScope objects must be set to
appropriate values before this object may be set to
active(1).
This control entry may be created and destroyed
independently of the associated portSelGrpEntry, however its
associated atmMatrixSDTable and atmMatrixDSTable can exist
only when the portSelGrpEntry controlling this collection is
active.
If this object is not equal to active(1), all associated
entries in the atmMatrixSDTable and atmMatrixDSTable shall
be deleted."
::= { atmMatrixControlEntry 8 }
-- atmMatrixSDTable
-- call and traffic data collected on behalf of specific
-- portSelectGroups; sorted by src address first
atmMatrixSDTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmMatrixSDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics for conversations between
particular ATM endpoint addresses that have been discovered
on behalf of the portSelectGroup associated with this entry.
The probe will add a new entry to this table for all
conversations (connections) between distinct source and
destination address pairs, detected in all calls, on all
ports configured in the portSelGrpEntry controlling this
collection.
Further, this table will only contain entries that have a
corresponding entry in the atmMatrixDSTable with the same
source address and destination address."
::= { atmMatrix 2 }
atmMatrixSDEntry OBJECT-TYPE
SYNTAX AtmMatrixSDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmMatrixSDTable.
The portSelGrpIndex value in the index identifies the
portSelectGroup on whose behalf this entry was created.
An example of the indexing of this entry is
atmMatrixSDCells.1.20.<NSAP>.20.<NSAP>.2"
INDEX { portSelGrpIndex, atmMatrixSDSrcAddress,
atmMatrixSDDstAddress, atmMatrixSDSClass }
::= { atmMatrixSDTable 1 }
AtmMatrixSDEntry ::= SEQUENCE {
atmMatrixSDSrcAddress AtmAddr,
atmMatrixSDDstAddress AtmAddr,
atmMatrixSDSClass ServiceClass,
atmMatrixSDCreateTime LastCreateTime,
atmMatrixSDCells ZeroBasedCounter32,
atmMatrixSDCellsRollovers ZeroBasedCounter32,
atmMatrixSDHCCells Counter64,
atmMatrixSDNumCallAttempts ZeroBasedCounter32,
atmMatrixSDNumCalls ZeroBasedCounter32,
atmMatrixSDConnTime ConnectTime
}
atmMatrixSDSrcAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The transmitting endpoint ATM address for this
atmMatrixSDEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table."
::= { atmMatrixSDEntry 1 }
atmMatrixSDDstAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination endpoint ATM address for this
atmMatrixSDEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table."
::= { atmMatrixSDEntry 2 }
atmMatrixSDSClass OBJECT-TYPE
SYNTAX ServiceClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values."
::= { atmMatrixSDEntry 3 }
atmMatrixSDCreateTime OBJECT-TYPE
SYNTAX LastCreateTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls."
::= { atmMatrixSDEntry 4 }
atmMatrixSDCells OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of error-free cells detected on connections in
which these ATM addresses were identified as the
transmitting and receiving endpoint addresses.
Note that for point-to-multipoint connections, an entry is
created for each root-to-leaf address-pair that exists, and
each cell sent from the root on a point-to-multipoint ATM
connection is counted once in each distinct matrix entry."
::= { atmMatrixSDEntry 5 }
atmMatrixSDCellsRollovers OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the associated instance of the
atmMatrixSDCells object has transitioned from the value
2^^32-1 to zero."
::= { atmMatrixSDEntry 6 }
atmMatrixSDHCCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high capacity version of the atmMatrixSDCells object."
::= { atmMatrixSDEntry 7 }
atmMatrixSDNumCallAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SVC call setup attempts detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixSDSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixSDDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which these ATM addresses
are identified as the calling and called parties."
::= { atmMatrixSDEntry 8 }
atmMatrixSDNumCalls OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful SVC call setups detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixSDSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixSDDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
valid connection is established in which these ATM addresses
are identified as the calling and called parties."
::= { atmMatrixSDEntry 9 }
atmMatrixSDConnTime OBJECT-TYPE
SYNTAX ConnectTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of all calls identified by the associated
instance of atmMatrixSDNumCallAttempts."
::= { atmMatrixSDEntry 10 }
-- atmMatrixDSTable
-- call and traffic data collected on behalf of specific
-- portSelectGroups; sorted by destination address first
atmMatrixDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmMatrixDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics for conversations between
particular ATM endpoint addresses that have been discovered
on behalf of the portSelectGroup associated with this entry.
The probe will add a new entry to this table for all
conversations (connections) between distinct source and
destination address pairs, detected in all cells identified
by the associated portSelGrpEntry criteria.
Further, this table will only contain entries that have a
corresponding entry in the atmMatrixSDTable with the same
source address and destination address."
::= { atmMatrix 3 }
atmMatrixDSEntry OBJECT-TYPE
SYNTAX AtmMatrixDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmMatrixDSTable.
The portSelGrpIndex value in the index identifies the
portSelectGroup on whose behalf this entry was created.
An example of the indexing of this entry is
atmMatrixDSCells.1.20.<NSAP>.20.<NSAP>.2"
INDEX { portSelGrpIndex, atmMatrixDSDstAddress,
atmMatrixDSSrcAddress, atmMatrixDSSClass }
::= { atmMatrixDSTable 1 }
AtmMatrixDSEntry ::= SEQUENCE {
atmMatrixDSSrcAddress AtmAddr,
atmMatrixDSDstAddress AtmAddr,
atmMatrixDSSClass ServiceClass,
atmMatrixDSCreateTime LastCreateTime,
atmMatrixDSCells ZeroBasedCounter32,
atmMatrixDSCellsRollovers ZeroBasedCounter32,
atmMatrixDSHCCells Counter64,
atmMatrixDSNumCallAttempts ZeroBasedCounter32,
atmMatrixDSNumCalls ZeroBasedCounter32,
atmMatrixDSConnTime ConnectTime
}
atmMatrixDSSrcAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The transmitting endpoint ATM address for this
atmMatrixDSEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table."
::= { atmMatrixDSEntry 1 }
atmMatrixDSDstAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination endpoint ATM address for this
atmMatrixDSEntry.
This is represented as an octet string with specific
semantics and length as identified by the AtmAddr textual
convention.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table."
::= { atmMatrixDSEntry 2 }
atmMatrixDSSClass OBJECT-TYPE
SYNTAX ServiceClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The quality of service classification for this entry. See
the ServiceClass textual convention for details and specific
class-of-service values."
::= { atmMatrixDSEntry 3 }
atmMatrixDSCreateTime OBJECT-TYPE
SYNTAX LastCreateTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this entry was activated. This
can be used by the management station to ensure that the
entry has not been deleted and recreated between polls."
::= { atmMatrixDSEntry 4 }
atmMatrixDSCells OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of error-free cells detected on ATM connections
in which these ATM addresses were identified as the
transmitting and receiving endpoint addresses.
Note that for point-to-multipoint connections, an entry is
created for each root-to-leaf address-pair that exists, and
each cell sent from the root on a point-to-multipoint ATM
connection is counted once in each distinct matrix entry."
::= { atmMatrixDSEntry 5 }
atmMatrixDSCellsRollovers OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the associated instance of the
atmMatrixDSCells object has transitioned from the value
2^^32-1 to zero."
::= { atmMatrixDSEntry 6 }
atmMatrixDSHCCells OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high capacity version of the atmMatrixDSCells object."
::= { atmMatrixDSEntry 7 }
atmMatrixDSNumCallAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SVC call setup attempts detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixDSSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixDSDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
connection attempt is detected in which these ATM addresses
are identified as the calling and called parties."
::= { atmMatrixDSEntry 8 }
atmMatrixDSNumCalls OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful SVC call setups detected on ATM
connections within the specified portSelectGroup, in which
the indicated atmMatrixDSSrcAddress endpoint address was
identified as the Calling Party and the indicated
atmMatrixDSDstAddress was identified as the Called Party.
Note that this value includes calls that are currently in
progress. A probe should increment this counter each time a
valid connection is established in which these ATM addresses
are identified as the calling and called parties."
::= { atmMatrixDSEntry 9 }
atmMatrixDSConnTime OBJECT-TYPE
SYNTAX ConnectTime
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time of all calls identified by the associated
instance of atmMatrixDSNumCallAttempts."
::= { atmMatrixDSEntry 10 }
--
-- ATM MatrixTopN Tables
--
-- Finds and reports the top traffic contributors,
-- according to associated portSelectGroup criteria
atmMatrixTopNControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmMatrixTopNControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of parameters that control the creation of a report
of the top N matrix entries according to a selected metric."
::= { atmMatrix 4 }
atmMatrixTopNControlEntry OBJECT-TYPE
SYNTAX AtmMatrixTopNControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmMatrixTopNControlTable.
An example of the indexing of this table is
atmMatrixTopNControlDuration.3.1"
INDEX { portSelGrpIndex, atmMatrixTopNControlIndex }
::= { atmMatrixTopNControlTable 1 }
AtmMatrixTopNControlEntry ::= SEQUENCE {
atmMatrixTopNControlIndex Integer32,
atmMatrixTopNControlRateBase INTEGER,
atmMatrixTopNControlSClass ServiceClass,
atmMatrixTopNControlTimeRemaining Integer32,
atmMatrixTopNControlGeneratedReports Counter32,
atmMatrixTopNControlDuration Integer32,
atmMatrixTopNControlRequestedSize Integer32,
atmMatrixTopNControlGrantedSize Integer32,
atmMatrixTopNControlStartTime TimeStamp,
atmMatrixTopNControlOwner OwnerString,
atmMatrixTopNControlStatus RowStatus
}
atmMatrixTopNControlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that is used to uniquely identify an entry in the
atmMatrixTopNControlTable. Each such entry defines one top
N report prepared on behalf of one atmMatrix entry, which
must exist before this entry may be created."
::= { atmMatrixTopNControlEntry 1 }
atmMatrixTopNControlRateBase OBJECT-TYPE
SYNTAX INTEGER {
atmMatrixTopNCells(1),
atmMatrixTopNNumCallAttempts(2),
atmMatrixTopNNumCalls(3),
atmMatrixTopNConnTime(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable for each atmMatrix entry that the
atmMatrixTopNEntries are sorted by.
This object may not be modified if the associated
atmMatrixTopNControlStatus object is equal to active(1)."
::= { atmMatrixTopNControlEntry 2 }
atmMatrixTopNControlSClass OBJECT-TYPE
SYNTAX ServiceClass
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The service class for which this topN control entry is
collecting information in associated atmMatrixTopN reports.
This object may not be modified if the associated
atmMatrixTopNControlStatus object is equal to active(1)."
::= { atmMatrixTopNControlEntry 3 }
atmMatrixTopNControlTimeRemaining OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds left in the report currently being
collected. When this object is modified by the management
station, a new collection is started, possibly aborting a
currently running report. The new value is used as the
requested duration of this report, and is immediately loaded
into the associated atmMatrixTopNControlDuration object.
When the report finishes, the probe will automatically start
another collection with the same initial value of
atmMatrixTopNControlTimeRemaining. Thus the management
station may simply read the resulting reports repeatedly,
checking the startTime and duration each time to ensure that
a report was not missed or that the report parameters were
not changed.
While the value of this object is non-zero, it decrements by
one per second until it reaches zero. At the time that this
object decrements to zero, the report is made accessible in
the atmMatrixTopNTable, overwriting any report that may be
there.
When this object is modified by the management station, any
associated entries in the atmMatrixTopNTable shall be
deleted."
DEFVAL { 1800 }
::= { atmMatrixTopNControlEntry 4 }
atmMatrixTopNControlGeneratedReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reports that have been generated by this
entry."
::= { atmMatrixTopNControlEntry 5 }
atmMatrixTopNControlDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that this report has collected during
the last sampling interval.
When the associated atmMatrixTopNControlTimeRemaining object
is set, this object shall be set by the probe to the same
value and shall not be modified until the next time the
atmMatrixTopNControlTimeRemaining is set.
This value shall be zero if no reports have been requested
for this atmMatrixTopNControlEntry."
::= { atmMatrixTopNControlEntry 6 }
atmMatrixTopNControlRequestedSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of host entries requested for this
report.
When this object is created or modified, the probe should
set atmMatrixTopNControlGrantedSize as closely to this
object as is possible for the particular probe
implementation and available resources."
DEFVAL { 150 }
::= { atmMatrixTopNControlEntry 7 }
atmMatrixTopNControlGrantedSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of host entries in this report.
When the associated atmMatrixTopNControlRequestedSize object
is created or modified, the probe should set this object as
closely to the requested value as is possible for the
particular implementation and available resources. The probe
must not lower this value except as a result of a set to the
associated atmMatrixTopNControlRequestedSize object.
For example, if the value of atmMatrixTopNControlRateBase is
equal to atmMatrixTopNCells(1), when the next topN report is
generated, host entries with the highest value of
atmMatrixSDCells shall be placed in this table in decreasing
order of this rate until there is no more room or until
there are no more matrix entries. Each atmMatrixSDCells
value is copied to the associated atmMatrixTopNRate object.
It is an implementation-specific matter how entries with the
same value are sorted. It is also an implementation-
specific matter as to whether or not zero-valued entries are
available."
::= { atmMatrixTopNControlEntry 8 }
atmMatrixTopNControlStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this top N report was last
started. In other words, this is the time that the
associated atmMatrixTopNControlTimeRemaining object was
modified to start the requested report or the time the
report was last automatically (re)started.
This object may be used by the management station to
determine if a report was missed or not."
::= { atmMatrixTopNControlEntry 9 }
atmMatrixTopNControlOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { atmMatrixTopNControlEntry 10 }
atmMatrixTopNControlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this atmMatrixTopNControlEntry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
If this object is not equal to active(1), all associated
entries in the atmMatrixTopNTable shall be deleted by the
agent."
::= { atmMatrixTopNControlEntry 11 }
--
-- atmMatrixTopNTable
--
atmMatrixTopNTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmMatrixTopNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of statistics for those matrix entries that have
counted the highest number of cells, calls, or connection
time."
::= { atmMatrix 5 }
atmMatrixTopNEntry OBJECT-TYPE
SYNTAX AtmMatrixTopNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the atmMatrixTopNTable.
The atmMatrixTopNControlIndex value in the index identifies
the atmMatrixTopNControlEntry on whose behalf this entry was
created.
An example of the indexing of this table is
atmMatrixTopNSrcAddress.1.3.10"
INDEX { portSelGrpIndex, atmMatrixTopNControlIndex,
atmMatrixTopNIndex }
::= { atmMatrixTopNTable 1 }
AtmMatrixTopNEntry ::= SEQUENCE {
atmMatrixTopNIndex Integer32,
atmMatrixTopNSrcAddress AtmAddr,
atmMatrixTopNDstAddress AtmAddr,
atmMatrixTopNRate Integer32,
atmMatrixTopNReverseRate Integer32
}
atmMatrixTopNIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
atmMatrixTopNTable among those in the same report. This
index is between 1 and N, where N is the number of entries
in this report.
Each conversation in the selected atmMatrixSDTable, for the
report interval, is ranked in descending order of the metric
identified by the atmMatrixTopNRate object.
For example, if the value of atmMatrixTopNControlRateBase is
equal to atmMatrixTopNCells(1), increasing values of
atmMatrixTopNIndex shall be assigned to entries with
decreasing delta values of atmMatrixSDCells (for the report
interval), until index N is assigned or there are no more
atmMatrixSDEntries."
::= { atmMatrixTopNEntry 1 }
atmMatrixTopNSrcAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM endpoint address identified as the source of the
traffic measured in this report.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table."
::= { atmMatrixTopNEntry 2 }
atmMatrixTopNDstAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM endpoint address identified as the destination of
the traffic measured in this report.
Note that only 20 octet 'AtmAddr' addresses are collected in
this table."
::= { atmMatrixTopNEntry 3 }
atmMatrixTopNRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the ranked metric for this conversation, for
this report.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNCells(1), then this object is assigned the
delta value of the atmMatrixSDCells object during this
report interval.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNNumCallAttempts(2), then this object is
assigned the delta value of the atmMatrixSDNumCallAttempts
object during this report interval.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNNumCalls(3), then this object is assigned the
delta value of the atmMatrixSDNumCalls object during this
report interval.
If the associated value of atmMatrixTopNRateBase is equal to
atmMatrixTopNConnTime(4), then this object is assigned the
delta value of the atmMatrixSDConnTime object during this
report interval."
::= { atmMatrixTopNEntry 4 }
atmMatrixTopNReverseRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the associated metric for this conversation,
and for this report, but for the reverse direction.
For example, if the associated value of
atmMatrixTopNRateBase is equal to atmMatrixTopNCells(1),
then this object contains the atmMatrixSDCells delta cell
rate for the reverse direction traffic (i.e., destination to
source traffic)."
::= { atmMatrixTopNEntry 5 }
-- atmConfig group; cisco extensions for agent configuration
atmRmonDataCollectMode OBJECT-TYPE
SYNTAX INTEGER {
active(1), -- data collection active
inactive(2) -- data collection inactive
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the internal data collection for the
entire ATM-RMON agent. If this object has a
value of 'active(1)', then data tables will be created
and maintained (normal behavior). If this object
has a value of 'inactive(2)' then ATM-RMON monitoring
will not occur, even if valid control tables exist
for particular collections.
Data tables for active collections are deleted when this
object is changed to 'inactive(2)', but control tables are
not deleted. When this object is changed to 'active(1)',
data collection is started for all valid control tables. "
-- DEFVAL { inactive(2) }
::= { atmConfig 1 }
-- Conformance Macros
atmRmonMIBCompliances OBJECT IDENTIFIER ::= { atmRmonConformance 1 }
atmRmonMIBGroups OBJECT IDENTIFIER ::= { atmRmonConformance 2 }
atmRmonMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the ATM-RMON
MIB."
MODULE -- this module
MANDATORY-GROUPS { portSelectGroup,
atmStatsGroup,
atmHostGroup,
atmMatrixGroup
}
::= { atmRmonMIBCompliances 1 }
portSelectGroup OBJECT-GROUP
OBJECTS {
portSelGrpDescr,
portSelGrpCreateTime,
portSelGrpOwner,
portSelGrpStatus,
portSelCollectGroup,
portSelCreateTime,
portSelOwner,
portSelStatus
}
STATUS current
DESCRIPTION
"Selects the ATM connections that should be monitored as
part of a specific collection-group."
::= { atmRmonMIBGroups 1 }
atmStatsGroup OBJECT-GROUP
OBJECTS {
atmStatsControlDropEvents,
atmStatsControlOwner,
atmStatsControlStatus,
atmStatsCreateTime,
atmStatsCells,
atmStatsCellsRollovers,
atmStatsNumCallAttempts,
atmStatsNumCalls,
atmStatsConnTime
}
STATUS current
DESCRIPTION
"Counts the basic statistics for collections on behalf of
particular portSelectGroup collections."
::= { atmRmonMIBGroups 2 }
atmStatsHCGroup OBJECT-GROUP
OBJECTS {
atmStatsHCCells
}
STATUS current
DESCRIPTION
"Counts the high capacity basic statistics for collections
on behalf of particular portSelectGroup collections. The
atmStatsGroup must be implemented if the atmStatsHCGroup is
implemented. This group is mandatory for implementations
which support high capacity counters."
::= { atmRmonMIBGroups 3 }
atmHostGroup OBJECT-GROUP
OBJECTS {
atmHostControlInserts,
atmHostControlDeletes,
atmHostControlMaxDesiredEntries,
atmHostControlPriority,
atmHostControlAddrCollectScope,
atmHostControlDropEvents,
atmHostControlOwner,
atmHostControlStatus,
atmHostCreateTime,
atmHostInCells,
atmHostInCellsRollovers,
atmHostOutCells,
atmHostOutCellsRollovers,
atmHostInNumCallAttempts,
atmHostInNumCalls,
atmHostOutNumCallAttempts,
atmHostOutNumCalls,
atmHostInConnTime,
atmHostOutConnTime
}
STATUS current
DESCRIPTION
"Counts the amount of traffic sent from and to each ATM
address discovered by the probe, on behalf of particular
portSelectGroup collections."
::= { atmRmonMIBGroups 4 }
atmHostHCGroup OBJECT-GROUP
OBJECTS {
atmHostInHCCells,
atmHostOutHCCells
}
STATUS current
DESCRIPTION
"Counts the amount of traffic sent from and to each ATM
address discovered by the probe, on behalf of particular
portSelectGroup collections, using high-capacity counters.
The atmHostGroup must be implemented if the atmHostHCGroup
is implemented. This group is mandatory for implementations
which support high capacity counters."
::= { atmRmonMIBGroups 5 }
atmMatrixGroup OBJECT-GROUP
OBJECTS {
atmMatrixControlInserts,
atmMatrixControlDeletes,
atmMatrixControlMaxDesiredEntries,
atmMatrixControlPriority,
atmMatrixControlAddrCollectScope,
atmMatrixControlDropEvents,
atmMatrixControlOwner,
atmMatrixControlStatus,
atmMatrixSDCreateTime,
atmMatrixSDCells,
atmMatrixSDCellsRollovers,
atmMatrixSDNumCallAttempts,
atmMatrixSDNumCalls,
atmMatrixSDConnTime,
atmMatrixDSCreateTime,
atmMatrixDSCells,
atmMatrixDSCellsRollovers,
atmMatrixDSNumCallAttempts,
atmMatrixDSNumCalls,
atmMatrixDSConnTime,
atmMatrixTopNControlRateBase,
atmMatrixTopNControlSClass,
atmMatrixTopNControlTimeRemaining,
atmMatrixTopNControlGeneratedReports,
atmMatrixTopNControlDuration,
atmMatrixTopNControlRequestedSize,
atmMatrixTopNControlGrantedSize,
atmMatrixTopNControlStartTime,
atmMatrixTopNControlOwner,
atmMatrixTopNControlStatus,
atmMatrixTopNSrcAddress,
atmMatrixTopNDstAddress,
atmMatrixTopNRate,
atmMatrixTopNReverseRate
}
STATUS current
DESCRIPTION
"Counts the amount of traffic sent between each pair of ATM
addresses discovered by the probe, on behalf of particular
portSelectGroup collections."
::= { atmRmonMIBGroups 6 }
atmMatrixHCGroup OBJECT-GROUP
OBJECTS {
atmMatrixSDHCCells,
atmMatrixDSHCCells
}
STATUS current
DESCRIPTION
"Counts the amount of traffic sent between each pair of ATM
addresses discovered by the probe, on behalf of particular
portSelectGroup collections, using high capacity counters.
The atmMatrixGroup must be implemented if the
atmMatrixHCGroup is implemented. This group is mandatory
for implementations which support high capacity counters."
::= { atmRmonMIBGroups 7 }
atmConfigGroup OBJECT-GROUP
OBJECTS {
atmRmonDataCollectMode
}
STATUS current
DESCRIPTION
"Configuration extentions used to control internal
agent behavior."
::= { atmRmonMIBGroups 8 }
END
Reference in New Issue Copy Permalink