FASTPATH-ROUTING6-MIB DEFINITIONS ::= BEGIN -- Broadcom Corporation FastPath Routing MIB -- Copyright Broadcom Corporation (2007) All rights reserved. -- This SNMP Management Information Specification -- embodies Broadcom Corporation's confidential and proprietary -- intellectual property. Broadcom Corporation retains all title -- and ownership in the Specification including any revisions. -- This Specification is supplied "AS IS", Broadcom Corporation -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Unsigned32, Integer32, Gauge32 FROM SNMPv2-SMI DisplayString, PhysAddress, TruthValue, TimeStamp, VariablePointer, RowPointer, RowStatus, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix, Ipv6AddressIfIdentifier, Ipv6IfIndexOrZero FROM IPV6-TC fastPath FROM BROADCOM-REF-MIB; fastPathRoutingIpv6 MODULE-IDENTITY LAST-UPDATED "200705230000Z" -- 23 May 2007 12:00:00 GMT ORGANIZATION "Broadcom Corporation" CONTACT-INFO " Customer Support Postal: Broadcom Corporation 100, Perimeter Park Drive Morrisville, NC 27560 Tel: +1 919 865 2700" DESCRIPTION "The Broadcom Private MIB for FastPath Ipv6 Routing" -- Revision history. REVISION "200705230000Z" -- 23 May 2007 12:00:00 GMT DESCRIPTION "Broadcom branding related changes." REVISION "200509211700Z" -- 21 Sept 2005 12:00 PM EST DESCRIPTION "Updated for release" ::= { fastPath 30 } --************************************************************************************** -- agentIpv6Group -- --************************************************************************************** agentIpv6Group OBJECT IDENTIFIER ::= { fastPathRoutingIpv6 1 } agentIpv6RoutingMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enables/disables ipv6 unicast routing on the switch." ::= { agentIpv6Group 1 } --************************************************************************************** -- agentIpv6InterfaceTable -- --************************************************************************************** agentIpv6InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { agentIpv6Group 2 } agentIpv6InterfaceEntry OBJECT-TYPE SYNTAX AgentIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { agentIpv6InterfaceIfIndex } ::= { agentIpv6InterfaceTable 1 } AgentIpv6InterfaceEntry ::= SEQUENCE { agentIpv6InterfaceIfIndex Integer32, agentIpv6InterfaceMtuValue Unsigned32, agentIpv6InterfaceDadTransmits Integer32, agentIpv6InterfaceLinkLocalOnly INTEGER, agentIpv6InterfaceIcmpUnreachables INTEGER } agentIpv6InterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex associated with this instance." ::= { agentIpv6InterfaceEntry 1 } agentIpv6InterfaceMtuValue OBJECT-TYPE SYNTAX Unsigned32 (0|1280..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU." ::= { agentIpv6InterfaceEntry 2 } agentIpv6InterfaceDadTransmits OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the dad transmits value for this interface." ::= { agentIpv6InterfaceEntry 3 } agentIpv6InterfaceLinkLocalOnly OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. " DEFVAL { disable } ::= { agentIpv6InterfaceEntry 4 } agentIpv6InterfaceIcmpUnreachables OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface." ::= { agentIpv6InterfaceEntry 5 } --************************************************************************************** -- agentIpv6RouterAdvertisementTable -- --************************************************************************************** agentIpv6RouterAdvertisementTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6RouterAdvertisementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well." ::= { agentIpv6Group 3 } agentIpv6RouterAdvertisementEntry OBJECT-TYPE SYNTAX AgentIpv6RouterAdvertisementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { agentIpv6RouterAdvertisementIfIndex } ::= { agentIpv6RouterAdvertisementTable 1 } AgentIpv6RouterAdvertisementEntry ::= SEQUENCE { agentIpv6RouterAdvertisementIfIndex Integer32, agentIpv6RouterAdvertisementSuppressMode INTEGER, agentIpv6RouterAdvertisementMaxAdvertisementInterval Integer32, agentIpv6RouterAdvertisementAdvertisementLifetime Integer32, agentIpv6RouterAdvertisementNbrSolicitInterval Integer32, agentIpv6RouterAdvertisementReachableTime Integer32, agentIpv6RouterAdvertisementManagedFlag INTEGER, agentIpv6RouterAdvertisementOtherFlag INTEGER } agentIpv6RouterAdvertisementIfIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Number to configure Router Advertisement on." ::= { agentIpv6RouterAdvertisementEntry 1 } agentIpv6RouterAdvertisementSuppressMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable router advertisement suppression on the interface." DEFVAL { disable } ::= { agentIpv6RouterAdvertisementEntry 2 } agentIpv6RouterAdvertisementMaxAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (4..1800) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time allowed between sending router advertisements from the interface." DEFVAL { 600 } ::= { agentIpv6RouterAdvertisementEntry 3 } agentIpv6RouterAdvertisementAdvertisementLifetime OBJECT-TYPE SYNTAX Integer32 (4..65520) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval." DEFVAL { 1800 } ::= { agentIpv6RouterAdvertisementEntry 4 } agentIpv6RouterAdvertisementNbrSolicitInterval OBJECT-TYPE SYNTAX Integer32 (0..3600000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval." DEFVAL { 0 } ::= { agentIpv6RouterAdvertisementEntry 5 } agentIpv6RouterAdvertisementReachableTime OBJECT-TYPE SYNTAX Integer32 (0..3600000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval." DEFVAL { 0 } ::= { agentIpv6RouterAdvertisementEntry 6 } agentIpv6RouterAdvertisementManagedFlag OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value of managed config field of router advertisement sent from the interface." DEFVAL { disable } ::= { agentIpv6RouterAdvertisementEntry 7 } agentIpv6RouterAdvertisementOtherFlag OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Value of other config field of router advertisement sent from the interface." DEFVAL { disable } ::= { agentIpv6RouterAdvertisementEntry 8 } -- Address Prefix table -- The IPv6 Address Prefix table contains information on -- the entity's IPv6 Address Prefixes that are associated -- with IPv6 interfaces. agentIpv6AddrPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6AddrPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of IPv6 address prefixes of IPv6 interfaces." ::= { agentIpv6Group 4 } agentIpv6AddrPrefixEntry OBJECT-TYPE SYNTAX AgentIpv6AddrPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface entry containing objects of a particular IPv6 address prefix." INDEX { agentIpv6InterfaceIfIndex, agentIpv6AddrPrefix, agentIpv6AddrPrefixLength } ::= { agentIpv6AddrPrefixTable 1 } AgentIpv6AddrPrefixEntry ::= SEQUENCE { agentIpv6AddrPrefix Ipv6AddressPrefix, agentIpv6AddrPrefixLength INTEGER, agentIpv6AddrPrefixOnLinkFlag TruthValue, agentIpv6AddrPrefixAutonomousFlag TruthValue, agentIpv6AddrPrefixAdvPreferredLifetime Unsigned32, agentIpv6AddrPrefixAdvValidLifetime Unsigned32 } agentIpv6AddrPrefix OBJECT-TYPE SYNTAX Ipv6AddressPrefix MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix associated with the this interface." ::= { agentIpv6AddrPrefixEntry 1 } agentIpv6AddrPrefixLength OBJECT-TYPE SYNTAX INTEGER (0..128) UNITS "bits" MAX-ACCESS not-accessible STATUS current DESCRIPTION "The length of the prefix (in bits)." ::= { agentIpv6AddrPrefixEntry 2 } agentIpv6AddrPrefixOnLinkFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise." ::= { agentIpv6AddrPrefixEntry 3 } agentIpv6AddrPrefixAutonomousFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address." ::= { agentIpv6AddrPrefixEntry 4 } agentIpv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected." ::= { agentIpv6AddrPrefixEntry 5 } agentIpv6AddrPrefixAdvValidLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet." ::= { agentIpv6AddrPrefixEntry 6 } -- the IPv6 Address table -- The IPv6 address table contains this node's IPv6 -- addressing information. agentIpv6AddrTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addressing information relevant to this node's interface addresses." ::= { agentIpv6Group 5 } agentIpv6AddrEntry OBJECT-TYPE SYNTAX AgentIpv6AddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The addressing information for one of this node's interface addresses." INDEX { agentIpv6InterfaceIfIndex, agentIpv6AddrAddress } ::= { agentIpv6AddrTable 1 } AgentIpv6AddrEntry ::= SEQUENCE { agentIpv6AddrAddress Ipv6Address, agentIpv6AddrPfxLength INTEGER, agentIpv6AddrEui64Flag TruthValue, agentIpv6AddrStatus RowStatus } agentIpv6AddrAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address to which this entry's addressing information pertains." ::= { agentIpv6AddrEntry 1 } agentIpv6AddrPfxLength OBJECT-TYPE SYNTAX INTEGER(0..128) UNITS "bits" MAX-ACCESS read-create STATUS current DESCRIPTION "The length of the prefix (in bits) associated with the IPv6 address of this entry." ::= { agentIpv6AddrEntry 2 } agentIpv6AddrEui64Flag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise." ::= { agentIpv6AddrEntry 3 } agentIpv6AddrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface." ::= { agentIpv6AddrEntry 4 } -- IPv6 Static Routing table agentIpv6StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination." ::= { agentIpv6Group 6 } agentIpv6StaticRouteEntry OBJECT-TYPE SYNTAX AgentIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A routing entry." INDEX { agentIpv6StaticRouteDest, agentIpv6StaticRoutePfxLength, agentIpv6StaticRouteIfIndex, agentIpv6StaticRouteNextHop } ::= { agentIpv6StaticRouteTable 1 } AgentIpv6StaticRouteEntry ::= SEQUENCE { agentIpv6StaticRouteDest Ipv6AddressPrefix, agentIpv6StaticRoutePfxLength INTEGER, agentIpv6StaticRouteIfIndex Ipv6IfIndexOrZero, agentIpv6StaticRouteNextHop Ipv6Address, agentIpv6StaticRoutePreference INTEGER, agentIpv6StaticRouteStatus RowStatus } agentIpv6StaticRouteDest OBJECT-TYPE SYNTAX Ipv6AddressPrefix MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IPv6 address of this route. This object may not take a Multicast address value." ::= { agentIpv6StaticRouteEntry 1 } agentIpv6StaticRoutePfxLength OBJECT-TYPE SYNTAX INTEGER(0..128) UNITS "bits" MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the prefix length of the destination address." ::= { agentIpv6StaticRouteEntry 2 } agentIpv6StaticRouteIfIndex OBJECT-TYPE SYNTAX Ipv6IfIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero." ::= { agentIpv6StaticRouteEntry 3 } agentIpv6StaticRouteNextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next system en route. " ::= { agentIpv6StaticRouteEntry 4 } agentIpv6StaticRoutePreference OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The routing preference metric for this route. A lower value is more preferred." DEFVAL { 1 } ::= { agentIpv6StaticRouteEntry 5 } agentIpv6StaticRouteStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface." ::= { agentIpv6StaticRouteEntry 6 } --************************************************************************************** -- agentIpv6ServicePortGroup -- --************************************************************************************** agentIpv6ServicePortGroup OBJECT IDENTIFIER ::= { agentIpv6Group 7 } -- IPv6 Service Port Prefix Table agentIpv6ServicePortPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6ServicePortPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port." ::= { agentIpv6ServicePortGroup 1 } agentIpv6ServicePortPrefixEntry OBJECT-TYPE SYNTAX AgentIpv6ServicePortPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 Service Port Prefix entry." INDEX { agentIpv6ServicePortPrefixIndex } ::= { agentIpv6ServicePortPrefixTable 1 } AgentIpv6ServicePortPrefixEntry ::= SEQUENCE { agentIpv6ServicePortPrefixIndex Unsigned32, agentIpv6ServicePortPrefix Ipv6Address, agentIpv6ServicePortPrefixLength Unsigned32 } agentIpv6ServicePortPrefixIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned." ::= { agentIpv6ServicePortPrefixEntry 1 } agentIpv6ServicePortPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The Ipv6 Prefix Address configured on the Service Port." ::= { agentIpv6ServicePortPrefixEntry 2 } agentIpv6ServicePortPrefixLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the IPv6 Prefix Address." ::= { agentIpv6ServicePortPrefixEntry 3 } -- IPv6 Service Port Default Router Table agentIpv6ServicePortDefaultRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6ServicePortDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port." ::= { agentIpv6ServicePortGroup 2 } agentIpv6ServicePortDefaultRouterEntry OBJECT-TYPE SYNTAX AgentIpv6ServicePortDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 Service Port Default Router entry." INDEX { agentIpv6ServicePortDefaultRouterIndex } ::= { agentIpv6ServicePortDefaultRouterTable 1 } AgentIpv6ServicePortDefaultRouterEntry ::= SEQUENCE { agentIpv6ServicePortDefaultRouterIndex Unsigned32, agentIpv6ServicePortDefaultRouter Ipv6Address } agentIpv6ServicePortDefaultRouterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned." ::= { agentIpv6ServicePortDefaultRouterEntry 1 } agentIpv6ServicePortDefaultRouter OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The Address of the IPv6 Default Router configured on the Service Port." ::= { agentIpv6ServicePortDefaultRouterEntry 2 } -- IPv6 Service Port Neighbor Table agentIpv6ServicePortNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpv6ServicePortNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port." ::= { agentIpv6ServicePortGroup 3 } agentIpv6ServicePortNbrEntry OBJECT-TYPE SYNTAX AgentIpv6ServicePortNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IPv6 Service Port Neighbor entry." INDEX { agentIpv6ServicePortNbrAddr } ::= { agentIpv6ServicePortNbrTable 1 } AgentIpv6ServicePortNbrEntry ::= SEQUENCE { agentIpv6ServicePortNbrAddr Ipv6Address, agentIpv6ServicePortNbrPhysAddr MacAddress, agentIpv6ServicePortNbrState INTEGER, agentIpv6ServicePortNbrUpdated TimeStamp, agentIpv6ServicePortNbrIsRouter TruthValue } agentIpv6ServicePortNbrAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ipv6 Address of a neighbor switch visible to the Service Port." ::= { agentIpv6ServicePortNbrEntry 1 } agentIpv6ServicePortNbrPhysAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MacAddress of the neighboring switch." ::= { agentIpv6ServicePortNbrEntry 2 } agentIpv6ServicePortNbrState OBJECT-TYPE SYNTAX INTEGER { reachable(1), stale(2), delay(3), probe(4), unknown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status." ::= { agentIpv6ServicePortNbrEntry 3 } agentIpv6ServicePortNbrUpdated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The last sysUpTime that this neighbor has been updated." ::= { agentIpv6ServicePortNbrEntry 4 } agentIpv6ServicePortNbrIsRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Returns true(1) if the neighbor machine is a router, false(2) otherwise." ::= { agentIpv6ServicePortNbrEntry 5 } --************************************************************************************** -- agentIpv6IcmpGroup -- --************************************************************************************** agentIpv6IcmpControlGroup OBJECT IDENTIFIER ::= { agentIpv6Group 8 } agentIpv6IcmpRateLimitInterval OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit." ::= { agentIpv6IcmpControlGroup 1 } agentIpv6IcmpRateLimitBurstSize OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of tokens to be placed after timeout." ::= { agentIpv6IcmpControlGroup 2 } END