1003 lines
42 KiB
Plaintext
1003 lines
42 KiB
Plaintext
-- DHCP Server MIB overview:
|
|
-- DHCP Server MIB falls under fastPath MIB node of the private subtree.
|
|
|
|
|
|
|
|
FASTPATH-DHCPSERVER-PRIVATE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- BROADCOM FASTPATH DHCP Server MIB
|
|
-- Copyright Broadcom Corporation (2002-2007) All rights reserved.
|
|
|
|
-- This SNMP Management Information Specification
|
|
-- embodies Broadcom Corporation's confidential and proprietary
|
|
-- intellectual property. Broadcom Corporation retains all title
|
|
-- and ownership in the Specification including any revisions.
|
|
|
|
-- This Specification is supplied "AS IS", Broadcom Corporation
|
|
-- makes no warranty, either expressed or implied,
|
|
-- as to the use, operation, condition, or performance of the
|
|
-- Specification.
|
|
|
|
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
|
|
Integer32, Unsigned32, TimeTicks, Counter32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, RowStatus, RowPointer, MacAddress,
|
|
StorageType, TruthValue FROM SNMPv2-TC
|
|
|
|
DisplayString, PhysAddress FROM RFC1213-MIB
|
|
fastPath FROM BROADCOM-REF-MIB;
|
|
|
|
fastPathDHCPServerPrivate MODULE-IDENTITY
|
|
LAST-UPDATED "200705230000Z" -- 23 May 2007 12:00:00 GMT
|
|
ORGANIZATION "Broadcom Corporation"
|
|
CONTACT-INFO
|
|
" Customer Support
|
|
Postal: Broadcom Corporation
|
|
100, Perimeter Park Drive., Suite H
|
|
Morrisville, NC 27560
|
|
Tel: +1 919 865 2700"
|
|
DESCRIPTION
|
|
"The Broadcom Private MIB for FASTPATH DHCP Server"
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"200705230000Z" -- 23 May 2007 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Broadcom branding related changes."
|
|
|
|
::= { fastPath 12 }
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentDhcpServerGroup -> contains MIB objects displaying various properties of a DHCP server
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentDhcpServerGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 1 }
|
|
|
|
agentDhcpServerAdminMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Admin-mode of the DHCP Server."
|
|
DEFVAL { disable }
|
|
::= { agentDhcpServerGroup 1 }
|
|
|
|
|
|
agentDhcpServerPingPktNos OBJECT-TYPE
|
|
SYNTAX INTEGER (0 | 2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation ."
|
|
DEFVAL { 2 }
|
|
::= { agentDhcpServerGroup 2 }
|
|
|
|
agentDhcpServerAutomaticBindingsNos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of IP addresses that have been assigned automatically."
|
|
|
|
::= { agentDhcpServerGroup 3 }
|
|
|
|
agentDhcpServerExpiredBindingsNos OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of expired leases."
|
|
::= { agentDhcpServerGroup 4 }
|
|
|
|
|
|
agentDhcpServerMalformedMessagesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server."
|
|
::= { agentDhcpServerGroup 5 }
|
|
|
|
agentDhcpServerDISCOVERMessagesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server."
|
|
::= { agentDhcpServerGroup 6 }
|
|
|
|
agentDhcpServerREQUESTMessagesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server."
|
|
::= { agentDhcpServerGroup 7 }
|
|
|
|
agentDhcpServerDECLINEMessagesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server."
|
|
::= { agentDhcpServerGroup 8 }
|
|
|
|
agentDhcpServerRELEASEMessagesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server."
|
|
::= { agentDhcpServerGroup 9 }
|
|
|
|
agentDhcpServerINFORMMessagesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server."
|
|
::= { agentDhcpServerGroup 10 }
|
|
|
|
agentDhcpServerOFFERMessagesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server."
|
|
::= { agentDhcpServerGroup 11 }
|
|
|
|
agentDhcpServerACKMessagesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server."
|
|
::= { agentDhcpServerGroup 12 }
|
|
|
|
agentDhcpServerNAKMessagesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server."
|
|
::= { agentDhcpServerGroup 13 }
|
|
|
|
agentDhcpServerClearStatistics OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Clears the DHCP server statistics."
|
|
DEFVAL { disable }
|
|
::= { agentDhcpServerGroup 14 }
|
|
|
|
agentDhcpServerBootpAutomatic OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools."
|
|
DEFVAL { disable }
|
|
::= { agentDhcpServerGroup 15 }
|
|
|
|
--**********************************************************************************
|
|
-- agentDhcpServerPoolConfigGroup
|
|
-- This group contains three tables : agentDhcpServerPoolConfigTable,
|
|
-- agentDhcpServerBindingTable,
|
|
--
|
|
-- agentDhcpServerPoolConfigTable -> This table is used to configure a
|
|
-- new DHCP address pool on a DHCP server. This table
|
|
-- is also used to delete a configured DHCP address pool.
|
|
--
|
|
-- agentDhcpServerPoolAllocationTable -> This table is used to configure a DHCP address
|
|
-- pool for dynamic and manual allocations.
|
|
--
|
|
-- agentDhcpServerExcludedAddressRangeTable -> This table lists the excluded-address ranges
|
|
-- for a DHCP Server
|
|
--
|
|
-- agentDhcpServerPoolOptionTable -> Table for DHCP Server options
|
|
--**********************************************************************************
|
|
|
|
|
|
agentDhcpServerPoolConfigGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 2 }
|
|
|
|
agentDhcpServerPoolNameCreate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0|1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A pool is created by applying write operation
|
|
on this MIB object and providing a new pool-name.
|
|
Get operation on this MIB object returns a
|
|
null-value, as for the purpose of viewing the
|
|
pool name, the user should perform the
|
|
traversal of agentDhcpServerPoolConfigTable.
|
|
For this reason the get operation on object
|
|
agentDhcpServerPoolNameCreate becomes insignificant."
|
|
::= { agentDhcpServerPoolConfigGroup 1 }
|
|
|
|
agentDhcpServerPoolConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpServerPoolConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the DHCP Server Pool configuration entries."
|
|
::= { agentDhcpServerPoolConfigGroup 2 }
|
|
|
|
agentDhcpServerPoolConfigEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpServerPoolConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents entry for a Dhcp server pool."
|
|
INDEX { agentDhcpServerPoolIndex }
|
|
::= { agentDhcpServerPoolConfigTable 1 }
|
|
|
|
AgentDhcpServerPoolConfigEntry ::= SEQUENCE {
|
|
agentDhcpServerPoolIndex
|
|
Unsigned32,
|
|
agentDhcpServerPoolName
|
|
DisplayString,
|
|
agentDhcpServerPoolDefRouter
|
|
DisplayString,
|
|
agentDhcpServerPoolDNSServer
|
|
DisplayString,
|
|
agentDhcpServerPoolLeaseTime
|
|
Integer32,
|
|
agentDhcpServerPoolType
|
|
INTEGER,
|
|
agentDhcpServerPoolNetbiosNameServer
|
|
DisplayString,
|
|
agentDhcpServerPoolNetbiosNodeType
|
|
INTEGER,
|
|
agentDhcpServerPoolNextServer
|
|
IpAddress,
|
|
agentDhcpServerPoolDomainName
|
|
DisplayString,
|
|
agentDhcpServerPoolBootfile
|
|
DisplayString,
|
|
agentDhcpServerPoolRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentDhcpServerPoolIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..512)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Pool Index, which 'll be used as index for the PoolConfig Table."
|
|
::= { agentDhcpServerPoolConfigEntry 1 }
|
|
|
|
agentDhcpServerPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the DHCP Address pool. This value cannot be modified"
|
|
::= { agentDhcpServerPoolConfigEntry 2 }
|
|
|
|
agentDhcpServerPoolDefRouter OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the default-router list(each default-router is
|
|
separated by comma and the list is terminated by semi-colon) for a DHCP client,
|
|
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list."
|
|
::= { agentDhcpServerPoolConfigEntry 3 }
|
|
|
|
agentDhcpServerPoolDNSServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the DNS IP servers(each DNS IP server is
|
|
separated by comma and the list is terminated by semi-colon) for a DHCP client,
|
|
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list."
|
|
::= { agentDhcpServerPoolConfigEntry 4 }
|
|
|
|
agentDhcpServerPoolLeaseTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..86400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the duration of the lease(in minutes) for an IP address that is assigened from a
|
|
DHCP server to a DHCP client. For infinite leases, lease-time value will be set to
|
|
86400."
|
|
::= { agentDhcpServerPoolConfigEntry 5 }
|
|
|
|
agentDhcpServerPoolType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
un-allocated(0),
|
|
dynamic(1),
|
|
manual(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the type of the binding that is associated with this pool."
|
|
::= { agentDhcpServerPoolConfigEntry 6 }
|
|
|
|
agentDhcpServerPoolNetbiosNameServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the IP address-list of Net BIOS name-servers that are
|
|
available to DHCP clients
|
|
(each IP address in this list is
|
|
separated by comma and the list is terminated by semi-colon),
|
|
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list."
|
|
::= { agentDhcpServerPoolConfigEntry 7 }
|
|
|
|
|
|
agentDhcpServerPoolNetbiosNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
b-node(1),
|
|
p-node(2),
|
|
m-node(4),
|
|
h-node(8)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if
|
|
node-type is not set to any of the four values."
|
|
::= { agentDhcpServerPoolConfigEntry 8 }
|
|
|
|
agentDhcpServerPoolNextServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address"
|
|
::= { agentDhcpServerPoolConfigEntry 9 }
|
|
|
|
agentDhcpServerPoolDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name."
|
|
::= { agentDhcpServerPoolConfigEntry 10 }
|
|
|
|
agentDhcpServerPoolBootfile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name."
|
|
::= { agentDhcpServerPoolConfigEntry 11 }
|
|
|
|
agentDhcpServerPoolRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable is used according to installation
|
|
and removal conventions for conceptual rows. When a pool is created by applying write
|
|
operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for
|
|
a poolEntry is set to 'destroy', the corresponding pool gets deleted. "
|
|
|
|
::= { agentDhcpServerPoolConfigEntry 12 }
|
|
|
|
--**********************************************************************************
|
|
agentDhcpServerPoolAllocationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpServerPoolAllocationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the DHCP Server's pool entries, showing the binding(dynamic/manual)
|
|
specific parameters."
|
|
::= { agentDhcpServerPoolConfigGroup 3 }
|
|
|
|
agentDhcpServerPoolAllocationEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpServerPoolAllocationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents entry for a Dhcp server's allocation pool."
|
|
AUGMENTS { agentDhcpServerPoolConfigEntry }
|
|
::= { agentDhcpServerPoolAllocationTable 1 }
|
|
|
|
-- All objects are of type read-write
|
|
AgentDhcpServerPoolAllocationEntry ::= SEQUENCE {
|
|
agentDhcpServerPoolAllocationName
|
|
DisplayString,
|
|
agentDhcpServerDynamicPoolIpAddress
|
|
IpAddress,
|
|
agentDhcpServerDynamicPoolIpMask
|
|
IpAddress,
|
|
agentDhcpServerDynamicPoolIpPrefixLength
|
|
Unsigned32,
|
|
agentDhcpServerPoolAllocationType
|
|
INTEGER,
|
|
agentDhcpServerManualPoolClientIdentifier
|
|
DisplayString,
|
|
agentDhcpServerManualPoolClientName
|
|
DisplayString,
|
|
agentDhcpServerManualPoolClientHWAddr
|
|
DisplayString,
|
|
agentDhcpServerManualPoolClientHWType
|
|
INTEGER,
|
|
agentDhcpServerManualPoolIpAddress
|
|
IpAddress,
|
|
agentDhcpServerManualPoolIpMask
|
|
IpAddress,
|
|
agentDhcpServerManualPoolIpPrefixLength
|
|
Unsigned32
|
|
}
|
|
|
|
agentDhcpServerPoolAllocationName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..30))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies name of the DHCP Address pool having dynamic binding.
|
|
This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable."
|
|
::= { agentDhcpServerPoolAllocationEntry 1 }
|
|
|
|
agentDhcpServerDynamicPoolIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Address pool.
|
|
The IP address must be set before setting the IP Mask or IP Prefix Length.
|
|
After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic.
|
|
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'."
|
|
::= { agentDhcpServerPoolAllocationEntry 2 }
|
|
|
|
agentDhcpServerDynamicPoolIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bit-combination that renders which portion of the address of the DHCP
|
|
address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before.
|
|
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'."
|
|
::= { agentDhcpServerPoolAllocationEntry 3 }
|
|
|
|
agentDhcpServerDynamicPoolIpPrefixLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the no. of bits that comprise the address-prefix.
|
|
The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before.
|
|
This value shows 0, if the binding type is 'un-allocated',or,'mnaual'."
|
|
::= { agentDhcpServerPoolAllocationEntry 4 }
|
|
|
|
agentDhcpServerPoolAllocationType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
un-allocated(0),
|
|
dynamic(1),
|
|
manual(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the type of the binding that is associated with this pool."
|
|
::= { agentDhcpServerPoolAllocationEntry 5 }
|
|
|
|
agentDhcpServerManualPoolClientIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It specifies the unique identifier (in colon separated hexadecimal format)
|
|
of a DHCP client. It is valid for manual bindings only.
|
|
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
|
|
To set this object, input should be 7 octets long with the hardware
|
|
type in the first octet."
|
|
::= { agentDhcpServerPoolAllocationEntry 6 }
|
|
|
|
agentDhcpServerManualPoolClientName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It specifies the name of a DHCP client.
|
|
Client name should't include domain-name.
|
|
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. "
|
|
::= { agentDhcpServerPoolAllocationEntry 7 }
|
|
|
|
agentDhcpServerManualPoolClientHWAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It specifies the hardware-address of a DHCP client. It is valid for manual bindings only.
|
|
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
|
|
After hardware-address, hardware-type will be configured."
|
|
::= { agentDhcpServerPoolAllocationEntry 8 }
|
|
|
|
agentDhcpServerManualPoolClientHWType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ethernet(1),
|
|
ieee802(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It specifies the hardware-type of a DHCP client. It is valid for manual bindings only.
|
|
It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
|
|
Before this, hardware-address must be configured."
|
|
DEFVAL { ethernet }
|
|
::= { agentDhcpServerPoolAllocationEntry 9 }
|
|
|
|
agentDhcpServerManualPoolIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DHCP Address pool for manual binding.
|
|
The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic.
|
|
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'."
|
|
::= { agentDhcpServerPoolAllocationEntry 10 }
|
|
|
|
agentDhcpServerManualPoolIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bit-combination that renders which portion of the address of the DHCP
|
|
address pool for a manual binding refers to the network or subnet and which part refers to the host.
|
|
The IP address must have been set before.
|
|
This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'."
|
|
::= { agentDhcpServerPoolAllocationEntry 11 }
|
|
|
|
agentDhcpServerManualPoolIpPrefixLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the no. of bits that comprise the address-prefix.
|
|
The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before.
|
|
This value shows 0, if the binding type is 'un-allocated',or,'dynamic'."
|
|
::= { agentDhcpServerPoolAllocationEntry 12 }
|
|
|
|
|
|
--***********************************************************************************************
|
|
agentDhcpServerExcludedAddressRangeCreate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It sets the IP address-ranges(from low to high) that a
|
|
DHCP server should not assign to DHCP clients. Each time
|
|
this MIB object is set successfully, one excluded range
|
|
of IP address will be set.
|
|
It is given in format - start and end IP address
|
|
separated by '-' and terminated by ';'.
|
|
One example would be - 192.168.36.1-200.1.1.1; .
|
|
This sets one excluded range of IP address,which
|
|
starts at 192.168.36.1 and ends at 200.1.1.1.
|
|
If only start IP address is given,
|
|
end IP address is assumed to be equal to the start IP
|
|
address. Get operation on this MIB object returns a
|
|
null-value, as for the purpose of viewing the
|
|
exclude-address ranges, the user should perform the
|
|
traversal of agentDhcpServerExcludedAddressRangeTable.
|
|
For this reason the get operation on object
|
|
agentDhcpServerExcludedAddressRangeCreate becomes insignificant."
|
|
::= { agentDhcpServerPoolConfigGroup 4 }
|
|
|
|
agentDhcpServerExcludedAddressRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpServerExcludedAddressRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the DHCP Server Pool configuration entries."
|
|
::= { agentDhcpServerPoolConfigGroup 5 }
|
|
|
|
agentDhcpServerExcludedAddressRangeEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpServerExcludedAddressRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents entry for a Dhcp server excluded address range table."
|
|
INDEX { agentDhcpServerExcludedRangeIndex }
|
|
::= { agentDhcpServerExcludedAddressRangeTable 1 }
|
|
|
|
-- All objects are of type read-only, except agentDhcpServerExcludedAddressRangeStatus,
|
|
-- which is of type read-write
|
|
AgentDhcpServerExcludedAddressRangeEntry ::= SEQUENCE {
|
|
agentDhcpServerExcludedRangeIndex
|
|
Unsigned32,
|
|
agentDhcpServerExcludedStartIpAddress
|
|
IpAddress,
|
|
agentDhcpServerExcludedEndIpAddress
|
|
IpAddress,
|
|
agentDhcpServerExcludedAddressRangeStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentDhcpServerExcludedRangeIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the index of the excluded IP address-range table."
|
|
::= { agentDhcpServerExcludedAddressRangeEntry 1 }
|
|
|
|
agentDhcpServerExcludedStartIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the starting IP address of the excluded address-range."
|
|
::= { agentDhcpServerExcludedAddressRangeEntry 2 }
|
|
|
|
agentDhcpServerExcludedEndIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the ending IP address of the excluded address-range."
|
|
::= { agentDhcpServerExcludedAddressRangeEntry 3 }
|
|
|
|
agentDhcpServerExcludedAddressRangeStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the row-status of the excluded address-range. Implemented values
|
|
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
|
|
When it is set to destroy(6), the corresponding address-range is deleted."
|
|
::= { agentDhcpServerExcludedAddressRangeEntry 4 }
|
|
|
|
--***********************************************************************************************
|
|
|
|
agentDhcpServerPoolOptionCreate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This sets the option for an existing DHCP Server pool. Here, it is required
|
|
to enter the pool-index, for which option is to be set and
|
|
the value of the DHCP option code in string-format : pool-index and option code
|
|
separated by '-' and terminated by ';', one example would be -> 1-19;
|
|
, 1 is the pool-index and 19 is the option code. "
|
|
::= { agentDhcpServerPoolConfigGroup 6 }
|
|
|
|
agentDhcpServerPoolOptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpServerPoolOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for configuring DHCP Server options."
|
|
::= { agentDhcpServerPoolConfigGroup 7 }
|
|
|
|
agentDhcpServerPoolOptionEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpServerPoolOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents entry for a Dhcp server option table."
|
|
INDEX { agentDhcpServerPoolOptionIndex,
|
|
agentDhcpServerPoolOptionCode }
|
|
::= { agentDhcpServerPoolOptionTable 1 }
|
|
|
|
-- All objects are of type read-write, except the indexes agentDhcpServerPoolOptionIndex and
|
|
-- agentDhcpServerPoolOptionCode
|
|
-- For a particular poolOption entry, option data ( ASCII, HEX and IP Address) can be
|
|
-- entered multiple times provided data-format is same each time.
|
|
AgentDhcpServerPoolOptionEntry ::= SEQUENCE {
|
|
agentDhcpServerPoolOptionIndex
|
|
Unsigned32,
|
|
agentDhcpServerPoolOptionCode
|
|
Unsigned32,
|
|
agentDhcpServerOptionPoolName
|
|
DisplayString,
|
|
agentDhcpServerPoolOptionAsciiData
|
|
DisplayString,
|
|
agentDhcpServerPoolOptionHexData
|
|
DisplayString,
|
|
agentDhcpServerPoolOptionIpAddressData
|
|
DisplayString,
|
|
agentDhcpServerPoolOptionStatus
|
|
RowStatus
|
|
}
|
|
agentDhcpServerPoolOptionIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..512)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Pool Index alongwith option-code, acts as index for the DHCP Server Option table.
|
|
"
|
|
::= { agentDhcpServerPoolOptionEntry 1 }
|
|
|
|
agentDhcpServerPoolOptionCode OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the DHCP option code. This alongwith pool-index acts as the index of the
|
|
DHCP Server Option table."
|
|
::= { agentDhcpServerPoolOptionEntry 2 }
|
|
|
|
agentDhcpServerOptionPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..31))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the DHCP Address pool. This value cannot be modified"
|
|
::= { agentDhcpServerPoolOptionEntry 3 }
|
|
|
|
agentDhcpServerPoolOptionAsciiData OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..441))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies an NVT ASCII character string. ASCII character strings
|
|
that contain white space must be delimited by quotation marks.
|
|
If an ascii optiondata is entered again, it gets concatenated with the
|
|
previous ascii data."
|
|
::= { agentDhcpServerPoolOptionEntry 4 }
|
|
|
|
agentDhcpServerPoolOptionHexData OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..1324))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies semi-colon separated hexadecimal data. Two hexadecimal digits
|
|
in hexadecimal character string represents one byte . Hexadecimal strings can
|
|
be entered in the following formats :
|
|
1) continuous hexadecimal digits like -- 0123456789abcdef
|
|
2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f
|
|
3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e
|
|
4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865
|
|
If a Hex optiondata is entered again, it gets concatenated with the
|
|
previous Hex data."
|
|
::= { agentDhcpServerPoolOptionEntry 5 }
|
|
|
|
agentDhcpServerPoolOptionIpAddressData OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the IP-address list(each IP-address is
|
|
separated by comma and the list is terminated by semi-colon) for a DHCP client,
|
|
an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).
|
|
If a IP option is entered again, it gets concatenated with the
|
|
previous IP data.
|
|
Maximum no. of IP addresses that can be entered at one time is 8.
|
|
"
|
|
::= { agentDhcpServerPoolOptionEntry 6 }
|
|
|
|
|
|
agentDhcpServerPoolOptionStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the row-status of the DHCP Server Pool option."
|
|
::= { agentDhcpServerPoolOptionEntry 7 }
|
|
|
|
--**************************************************************************************
|
|
-- agentDhcpServerLeaseGroup -> contains MIB objects displaying and clearing leases of a DHCP server
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentDhcpServerLeaseGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 3 }
|
|
|
|
agentDhcpServerLeaseClearAllBindings OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears All the DHCP server bindings."
|
|
DEFVAL { disable }
|
|
::= { agentDhcpServerLeaseGroup 1}
|
|
|
|
agentDhcpServerLeaseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpServerLeaseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the DHCP Server's Lease entries."
|
|
::= { agentDhcpServerLeaseGroup 2 }
|
|
|
|
agentDhcpServerLeaseEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpServerLeaseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents entry for a Dhcp server's leases."
|
|
INDEX { agentDhcpServerLeaseIPAddress }
|
|
|
|
::= { agentDhcpServerLeaseTable 1 }
|
|
|
|
-- All objects are of type read-only
|
|
AgentDhcpServerLeaseEntry ::= SEQUENCE {
|
|
agentDhcpServerLeaseIPAddress
|
|
IpAddress,
|
|
agentDhcpServerLeaseIPMask
|
|
IpAddress,
|
|
agentDhcpServerLeaseHWAddress
|
|
MacAddress,
|
|
agentDhcpServerLeaseRemainingTime
|
|
TimeTicks,
|
|
agentDhcpServerLeaseType
|
|
INTEGER,
|
|
agentDhcpServerLeaseStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentDhcpServerLeaseIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the IP address leased to the client."
|
|
::= { agentDhcpServerLeaseEntry 1 }
|
|
|
|
agentDhcpServerLeaseIPMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the IP mask of the address leased to the client."
|
|
::= { agentDhcpServerLeaseEntry 2 }
|
|
agentDhcpServerLeaseHWAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the hardware address of the client."
|
|
::= { agentDhcpServerLeaseEntry 3 }
|
|
|
|
agentDhcpServerLeaseRemainingTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds."
|
|
::= { agentDhcpServerLeaseEntry 4 }
|
|
|
|
agentDhcpServerLeaseType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
automatic(1),
|
|
manual(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the type of address lease as Automatic or Manual."
|
|
::= { agentDhcpServerLeaseEntry 5 }
|
|
|
|
agentDhcpServerLeaseStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the row-status of the address-lease. Implemented values
|
|
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
|
|
When it is set to destroy(6), the corresponding address-lease is cleared."
|
|
::= { agentDhcpServerLeaseEntry 6 }
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentDhcpServerAddressConflictGroup -> contains MIB objects displaying and clearing
|
|
-- address conflicts found by a DHCP server, when addresses are offered to the client.
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentDhcpServerAddressConflictGroup OBJECT IDENTIFIER ::= { fastPathDHCPServerPrivate 4 }
|
|
|
|
agentDhcpServerClearAllAddressConflicts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears all the address-conflicts found by DHCP server,when set to enable."
|
|
DEFVAL { disable }
|
|
::= { agentDhcpServerAddressConflictGroup 1}
|
|
|
|
agentDhcpServerAddressConflictLogging OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" It is used to enable, or disables the logging of address-conflicts on a DHCP Server."
|
|
DEFVAL { enable }
|
|
::= { agentDhcpServerAddressConflictGroup 2}
|
|
|
|
|
|
|
|
agentDhcpServerAddressConflictTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentDhcpServerAddressConflictEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of the conflicting-address entries."
|
|
::= { agentDhcpServerAddressConflictGroup 3 }
|
|
|
|
agentDhcpServerAddressConflictEntry OBJECT-TYPE
|
|
SYNTAX AgentDhcpServerAddressConflictEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents a conflicting-address entry."
|
|
INDEX { agentDhcpServerAddressConflictIP }
|
|
|
|
::= { agentDhcpServerAddressConflictTable 1 }
|
|
|
|
-- All objects are of type read-only, except agentDhcpServerAddressConflictStatus which is
|
|
-- of type read-write
|
|
AgentDhcpServerAddressConflictEntry ::= SEQUENCE {
|
|
agentDhcpServerAddressConflictIP
|
|
IpAddress,
|
|
agentDhcpServerAddressConflictDetectionType
|
|
INTEGER,
|
|
agentDhcpServerAddressConflictDetectionTime
|
|
TimeTicks,
|
|
agentDhcpServerAddressConflictStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentDhcpServerAddressConflictIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the conflicting IP address assigned to the client by DHCP server."
|
|
::= { agentDhcpServerAddressConflictEntry 1 }
|
|
|
|
agentDhcpServerAddressConflictDetectionType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ping(1),
|
|
gratuitousArp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the address-conflict detection-method."
|
|
::= { agentDhcpServerAddressConflictEntry 2 }
|
|
|
|
agentDhcpServerAddressConflictDetectionTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the sysUpTime at which the address-conflict was detected."
|
|
::= { agentDhcpServerAddressConflictEntry 3 }
|
|
|
|
agentDhcpServerAddressConflictStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the row-status of the conflicting-address entry. Implemented values
|
|
are - active(1) and destroy(6). For a valid range, the row-satus will return active(1).
|
|
When it is set to destroy(6), the corresponding conflicting-address entry is cleared."
|
|
::= { agentDhcpServerAddressConflictEntry 4 }
|
|
END
|