mibs-downloader/mibs/FASTPATH-DOT1X-ADVANCED-FEA...

453 lines
20 KiB
Plaintext

-- Dot1x Advanced Features MIB overview:
-- Dot1x Advanced Features MIB falls under fastPath MIB node of the private subtree.
FASTPATH-DOT1X-ADVANCED-FEATURES-MIB DEFINITIONS ::= BEGIN
-- Broadcom Corporation FastPath Dot1x Advanced Features MIB
-- Copyright Broadcom Corporation (2003-2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Broadcom Corporation's confidential and proprietary
-- intellectual property. Broadcom Corporation retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Broadcom Corporation
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32 FROM SNMPv2-SMI
dot1xPaePortNumber FROM IEEE8021-PAE-MIB
TEXTUAL-CONVENTION,
RowStatus,MacAddress FROM SNMPv2-TC
DisplayString FROM RFC1213-MIB
fastPath FROM BROADCOM-REF-MIB;
fastPathdot1xAdvanced MODULE-IDENTITY
LAST-UPDATED "200705230000Z" -- 23 May 2007 12:00:00 GMT
ORGANIZATION "Broadcom Corporation"
CONTACT-INFO
" Customer Support
Postal: Broadcom Corporation
100, Perimeter Park Drive
Morrisville, NC 27560
Tel: +1 919 865 2700"
DESCRIPTION
"The Broadcom Private MIB for FastPath Dot1x Advanced Features "
-- Revision history.
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Broadcom branding related changes."
::= { fastPath 36 }
Dot1xPortControlMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The control values of the Authenticator PAE controlled
Port."
SYNTAX INTEGER {
forceUnauthorized(1),
auto(2),
forceAuthorized(3),
macBased(4)
}
Dot1xSessionTerminationAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The action to be taken on session termination ."
SYNTAX INTEGER {
default(1),
reauthenticate(2)
}
agentDot1xEnhancementConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 1 }
agentDot1xRadiusVlanAssignment OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable dot1x Vlan Assignment Support on the switch."
DEFVAL { disable }
::= { agentDot1xEnhancementConfigGroup 1 }
--**************************************************************************************
-- agentDot1xPortConfigGroup -> Contains MIB objects configuring/displaying Dot1x Port details
-- and associated Functionality
--
--**************************************************************************************
agentDot1xPortConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 2 }
--------------------------------------------------------------
-- The Dot1x Enhanced Port Table
--------------------------------------------------------------
agentDot1xPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDot1xPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for dot1x enhanced Port details and associated functionality."
::= { agentDot1xPortConfigGroup 1 }
agentDot1xPortConfigEntry OBJECT-TYPE
SYNTAX AgentDot1xPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents entry for port config table."
INDEX { dot1xPaePortNumber}
::= {agentDot1xPortConfigTable 1 }
AgentDot1xPortConfigEntry ::= SEQUENCE {
agentDot1xPortControlMode
Dot1xPortControlMode,
agentDot1xGuestVlanId
Unsigned32,
agentDot1xGuestVlanPeriod
Unsigned32,
agentDot1xUnauthenticatedVlan
Unsigned32,
agentDot1xMaxUsers
Unsigned32,
agentDot1xPortVlanAssigned
Unsigned32,
agentDot1xPortVlanAssignedReason
INTEGER,
agentDot1xPortSessionTimeout
Unsigned32,
agentDot1xPortTerminationAction
Dot1xSessionTerminationAction,
agentDot1xPortMABenabled
INTEGER,
agentDot1xPortMABenabledOperational
INTEGER
}
agentDot1xPortControlMode OBJECT-TYPE
SYNTAX Dot1xPortControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dot1x port control mode of this port.The Port control mode .
The port control mode for this interface can take the following values ,
force-unauthorized - the port is in unauthorized mode,
auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized .
Otherwise, the port is in unauthorized mode.
If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access.
force-authorized - The port is placed in authorized mode
macBased - If more than one client is attached to the port, then each client needs to authenticate separately.
This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB"
DEFVAL {auto}
::= { agentDot1xPortConfigEntry 1}
agentDot1xGuestVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Guest Vlan of the port. A port will
be moved to its Guest Vlan if no client sucessfully
authenticates on that port for the Guest Vlan Period.
A value of zero indicates no Guest Vlan is configured for the interface."
DEFVAL {0}
::= { agentDot1xPortConfigEntry 2}
agentDot1xGuestVlanPeriod OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value, in seconds, of the guestVlanPeriod constant
currently in use for Guest Vlan Assignment for the
port ."
DEFVAL { 90 }
::= { agentDot1xPortConfigEntry 3 }
agentDot1xUnauthenticatedVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Unauthenticated Vlan of the port. A port will
be moved to its unauthenticated Vlan if the client authenticates unsucessfully
on that port .
A value of zero indicates no Unauthenticated Vlan is configured for the port. "
DEFVAL {0}
::= { agentDot1xPortConfigEntry 4}
agentDot1xMaxUsers OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specifies the maximum users or clients that can authenticate on this port when the port control mode is macBased. "
::= { agentDot1xPortConfigEntry 5}
agentDot1xPortVlanAssigned OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Specifies the vlan the port is assigned to by Dot1x .
Only relevant if the port control mode of the port is auto. "
DEFVAL {0}
::= { agentDot1xPortConfigEntry 6}
agentDot1xPortVlanAssignedReason OBJECT-TYPE
SYNTAX INTEGER {
default(1),
radius(2),
unauthenticatedVlan(3),
guestVlan(4),
notAssigned(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reason the port is assigned to the vlan specified by agentDot1xPortVlanAssigned .
Only relevant if the port control mode of the port is auto. "
DEFVAL {5}
::= { agentDot1xPortConfigEntry 7}
agentDot1xPortSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Specifies the session timeout value assigned by the Radius server for this port .
Only relevant if the port control mode of the port is auto. "
::= { agentDot1xPortConfigEntry 8}
agentDot1xPortTerminationAction OBJECT-TYPE
SYNTAX Dot1xSessionTerminationAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out .
Only relevant if the port control mode of the port is auto. "
DEFVAL {1}
::= { agentDot1xPortConfigEntry 9}
agentDot1xPortMABenabled OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specifies if Mac-based bypass authentication is configured for the port. "
DEFVAL {2}
::= { agentDot1xPortConfigEntry 10}
agentDot1xPortMABenabledOperational OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port. "
DEFVAL {2}
::= { agentDot1xPortConfigEntry 11}
--**************************************************************************************
-- agentDot1xClientConfigGroup -> Contains MIB objects displaying Dot1x Client details and
-- associated Functionality
--
--**************************************************************************************
agentDot1xClientConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 3 }
agentDot1xClientConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDot1xClientConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for dot1x Client details and associated functionality."
::= { agentDot1xClientConfigGroup 1 }
agentDot1xClientConfigEntry OBJECT-TYPE
SYNTAX AgentDot1xClientConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Represents entry for port config table."
INDEX { agentDot1xClientMacAddress}
::= {agentDot1xClientConfigTable 1 }
AgentDot1xClientConfigEntry ::= SEQUENCE {
agentDot1xClientMacAddress
MacAddress,
agentDot1xLogicalPort
Unsigned32,
agentDot1xInterface
Unsigned32,
agentDot1xClientAuthPAEstate
INTEGER,
agentDot1xClientBackendState
INTEGER,
agentDot1xClientUserName
DisplayString,
agentDot1xClientSessionTime
Unsigned32,
agentDot1xClientFilterID
DisplayString,
agentDot1xClientVlanAssigned
Unsigned32,
agentDot1xClientVlanAssignedReason
INTEGER,
agentDot1xClientSessionTimeout
Unsigned32,
agentDot1xClientTerminationAction
Dot1xSessionTerminationAction
}
agentDot1xClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the client MAC address of the client. "
::= { agentDot1xClientConfigEntry 1}
agentDot1xLogicalPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the client MAC address of the client . "
::= { agentDot1xClientConfigEntry 2}
agentDot1xInterface OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the physical interface to which the client is attached . "
::= { agentDot1xClientConfigEntry 3}
agentDot1xClientAuthPAEstate OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
disconnected(2),
connecting(3),
authenticating(4),
authenticated(5),
aborting(6),
held(7),
forceAuth(8),
forceUnauth(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value of the Authenticator PAE state
machine for the client."
::={ agentDot1xClientConfigEntry 4}
agentDot1xClientBackendState OBJECT-TYPE
SYNTAX INTEGER {
request(1),
response(2),
success(3),
fail(4),
timeout(5),
idle(6),
initialize(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Backend Authentication
state machine."
::={ agentDot1xClientConfigEntry 5}
agentDot1xClientUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the username with which the client is authenticated to the Radius server .
This value is only valid when the client is in authenticated state. "
::= { agentDot1xClientConfigEntry 6}
agentDot1xClientSessionTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the time elapsed in seconds since the client was authenticated in this session.
This value is only valid when the client is in authenticated state. "
::= { agentDot1xClientConfigEntry 7}
agentDot1xClientFilterID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Filter ID or Diffserv Policy name to be applied to the session .
This vlaue is populated only if it has been assigned by the RADIUS server.
This value is only valid when the client is in authenticated state."
::= { agentDot1xClientConfigEntry 8}
agentDot1xClientVlanAssigned OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the vlan the client is associated with by Dot1x .
This value is only valid when the client is in authenticated state."
::= { agentDot1xClientConfigEntry 9}
agentDot1xClientVlanAssignedReason OBJECT-TYPE
SYNTAX INTEGER {
default(1),
radius(2),
unauthenticatedVlan(3),
invalid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reason the client is associated to the vlan specified by agentDot1xClientVlanAssigned .
This value is only valid when the client is in authenticated state."
::= { agentDot1xClientConfigEntry 10}
agentDot1xClientSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the session time remaining for the client if assigned by the Radius server .
A value of 0 indicates that no session timeout was assigned by the RADIUS server.
This value is only valid when the client is in authenticated state. "
::= { agentDot1xClientConfigEntry 11}
agentDot1xClientTerminationAction OBJECT-TYPE
SYNTAX Dot1xSessionTerminationAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the session termination action assigned by the Radius Server .
This is the action taken when the session times out .
This value is only valid when the client is in authenticated state. "
::= { agentDot1xClientConfigEntry 12}
END