mibs-downloader/mibs/NETGEAR-MGMT-SECURITY-MIB.mib

138 lines
4.8 KiB
Plaintext

NETGEAR-MGMT-SECURITY-MIB DEFINITIONS ::= BEGIN
-- Copyright LVL7 Systems (2003-2005) All rights reserved.
-- This SNMP Management Information Specification
-- embodies LVL7 System's confidential and proprietary
-- intellectual property. LVL7 Systems retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", LVL7 Systems
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, NOTIFICATION-TYPE, IpAddress FROM SNMPv2-SMI
ng7000Switch FROM NETGEAR-REF-MIB
DisplayString FROM RFC1213-MIB;
agentMgmtSecurity MODULE-IDENTITY
LAST-UPDATED "200502231200Z" -- 23 Feb 2005 12:00:00 GMT
ORGANIZATION "Netgear"
CONTACT-INFO
""
DESCRIPTION
"The NETGEAR Private MIB for Mgmt Security"
-- revision history
REVISION
"200502231200Z" -- 23 Feb 2005 12:00:00 GMT
DESCRIPTION
"Initial revision."
::= { ng7000Switch 11 }
--**************************************************************************************
-- agentSSLConfigGroup
--
--**************************************************************************************
agentSSLConfigGroup OBJECT IDENTIFIER ::= { agentMgmtSecurity 1 }
agentSSLAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures whether the SSL service is enabled on this switch. The
default value is disable(2)."
::= { agentSSLConfigGroup 1 }
agentSSLSecurePort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the port the SSL service will respond on. The default
value is 443."
::= { agentSSLConfigGroup 2 }
agentSSLProtocolLevel OBJECT-TYPE
SYNTAX INTEGER {
ssl30(1), -- SSL 3.0
tls10(2), -- TSL 1.0
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures which protocol versions of SSL are enabled on this
switch. The default value is both(3)."
::= { agentSSLConfigGroup 3 }
--**************************************************************************************
-- agentSSHConfigGroup
--
--**************************************************************************************
agentSSHConfigGroup OBJECT IDENTIFIER ::= { agentMgmtSecurity 2 }
agentSSHAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures whether the SSH service is enabled on this switch. The
default value is disable(2)."
::= { agentSSHConfigGroup 1 }
agentSSHProtocolLevel OBJECT-TYPE
SYNTAX INTEGER {
ssh10(1), -- SSH 1.0
ssh20(2), -- SSH 2.0
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures which protocol versions of SSH are enabled on this
switch. The default value is both(3)."
::= { agentSSHConfigGroup 2 }
agentSSHSessionsCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of active SSH sessions on this switch."
::= { agentSSHConfigGroup 3 }
agentSSHMaxSessionsCount OBJECT-TYPE
SYNTAX Integer32 (0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max number of SSH sessions permitted on this switch."
::= { agentSSHConfigGroup 4 }
agentSSHSessionTimeout OBJECT-TYPE
SYNTAX Integer32 (1..160)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ssh idle timeout value for this switch im minutes."
::= { agentSSHConfigGroup 5 }
END