mibs-downloader/mibs/NETGEAR-QOS-DIFFSERV-PRIVAT...

2531 lines
107 KiB
Plaintext

-- DiffServ MIB overview:
-- DiffServ Private MIB falls under Netgear QOS MIB node of the private subtree.
-- Various MIB groups defined within this MIB are:
-- a) General Status Group -> All objects within this group are scalar and are not part of a
-- conceptual MIB table. The objects of this group define the current and maximum sizes of
-- conceptual DiffServ MIB tables like, DiffServ Class Table, DiffServ Class Rule Table,
-- DiffServ Policy Table,DiffServ Policy-Class Instance Table, DiffServ Policy Attribute
-- Table, DiffServ Service Table. Also, one object of this group named GenStatusAdminMode, is
-- used to enable or disable DiffServ on the switch.
-- b) Class Group -> This MIB group represents classifiers, which are used to differentiate
-- among types of traffic. There are two conceptual MIB tables within the class group :
-- 1) Class Table - The Class Table entry contains a name and type, plus a referenced ACL
-- type and number if the class type is 'acl'.
-- 2) Class Rule Table - Each Class Rule Table entry in the private MIB represents a single
-- match criterion that belongs to a class definition. Depending on the class type,
-- multiple criteria are evaluated as either an all-inclusive or sequential-ordered
-- relationship to determine if a packet belongs to the class. The
-- classRuleMatchEntryType object indicates specifically which of the match items is
-- described by this entry.
-- c) Policy Group -> DiffServ Policy group is used to define:
-- traffic conditioning actions - policing and marking applied to traffic classes, and
-- service provisioning actions - specifying bandwidth, shaping and queue depth management
-- requirements of service levels like Expedite Forwarding, Assured Forwarding etc. There
-- are five conceptual MIB tables within the policy group:
-- 1) Policy Table - The Policy Table entry contains policy-name, policy-type and next free
-- per-policy policyInstIndex for the Policy-Class Instance table. The policy-type defines
-- whether policy is applied inbound or outbound to an interface.
-- 2) Policy-Class Instance Table - An entry in this table is used to connect an policy with
-- an already created DiffServ class. It contains a class index, which identifies the
-- classifier definition used by the policy to establish an instance of that class (to
-- which policy attributes can be attached). It also contains the next free per-policy
-- policyAttrIndex for the policy attribute table.
-- 3) Policy Attribute Table - Each Policy Table Attribute entry attaches various policy
-- attributes to a policy-class instance. There is an object named
-- policyAttrStmtEntryType, that specifies which policy attributes are meaningful for a
-- particular policy-class instance.
-- 4) Policy-Class Inbound Performance Table - Contains performance counters for each
-- policy-class instance assigned to an interface in the inbound direction. This table
-- contains offered and discarded counters. These rows are automatically created/deleted
-- when a policy is attached to/removed from a service interface in an inbound direction.
-- 5) Policy-Class Outbound Performance Table - Contains performance counters for each
-- policy-class instance assigned to an interface in the outbound direction. This table
-- contains discarded, tail dropped, random dropped, shape delayed and sent counters.
-- Note that the random dropped and shape delayed counters are only active when their
-- respective policy attributes are defined for the policy-class instance, otherwise they
-- always read as 0. These rows are automatically created/deleted when a policy is
-- attached to/removed from a service interface in an outbound direction.
-- d) Service Group -> DiffServ Service group associates a policy with an interface in a
-- specific direction. There are two conceptual MIB tables within the service group:
-- 1) Service Table - Contains rows for each interface (ifIndex) that has a policy index
-- attached to it in a specific direction (ifDirection).
-- 2) Service Performance Table - Augments the Service Table to provide performance
-- counters for each row. This table contains offered, discarded and sent counters that
-- are aggregated for the attached policy as a whole based on the individual
-- policy-class instance counts.
-- General Notes:
-- 1) All objects of this MIB are prefixed with 'agentDiffServ' followed by the name of the
-- object with the first letter in uppercase.
-- 2) All counter tables like Policy-Class Inbound Performance Table, Policy-Class Outbound
-- Performance Table and Service Performance Table contain both 32-bit and 64-bit (high-
-- capacity) counters.
NETGEAR-QOS-DIFFSERV-PRIVATE-MIB DEFINITIONS ::= BEGIN
-- NETGEAR DiffServ MIB
-- Copyright LVL7 Systems (2002-2005) All rights reserved.
-- This SNMP Management Information Specification
-- embodies LVL7 System's confidential and proprietary
-- intellectual property. LVL7 Systems retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", LVL7 Systems
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
Counter64, Counter32, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
Integer32,Unsigned32 FROM SNMPv2-SMI
InetPortNumber FROM INET-ADDRESS-MIB
TEXTUAL-CONVENTION,RowStatus,
RowPointer,MacAddress,
StorageType,TruthValue FROM SNMPv2-TC
agentQOS FROM NETGEAR-QOS-MIB
TimeTicks FROM RFC1155-SMI
DisplayString,PhysAddress FROM RFC1213-MIB
IANAifType FROM IANAifType-MIB
ifIndex,InterfaceIndex FROM IF-MIB;
agentQOSDiffServPrivate MODULE-IDENTITY
LAST-UPDATED "200502231200Z" -- 23 Feb 2005 12:00:00 GMT
ORGANIZATION "Netgear"
CONTACT-INFO
""
DESCRIPTION
"The Netgear Private MIB for DiffServ"
-- revision history
REVISION
"200502231200Z" -- 23 Feb 2005 12:00:00 GMT
DESCRIPTION
"Initial revision."
::= { agentQOS 7 }
QosBurstSize ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The number of kilobytes (Kbytes) in a packet that may be sent in a
traffic stream without regard for other traffic streams."
SYNTAX Unsigned32 (1..128)
IntfDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IntfDirection specifies a direction of data travel on an
interface. 'inbound' traffic is operated on during reception from
the interface, while 'outbound' traffic is operated on prior to
transmission on the interface."
SYNTAX INTEGER {
in(1), -- ingress interface
out(2) -- egress interface
}
EtypeValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS current
DESCRIPTION
"Ethertype value of a packet. The allowed value is 0x0600 to 0xFFFF."
SYNTAX Unsigned32 (1536..65535) -- hex value 0x0600 to 0xFFFF
--**************************************************************************************
-- agentDiffServGenStatusGroup
--**************************************************************************************
agentDiffServGenStatusGroup OBJECT IDENTIFIER ::= { agentQOSDiffServPrivate 1 }
agentDiffServGenStatusAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" DiffServ Admin Mode"
DEFVAL { disable }
::= { agentDiffServGenStatusGroup 1 }
agentDiffServGenStatusClassTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current size of the Class Table"
::= { agentDiffServGenStatusGroup 2 }
agentDiffServGenStatusClassTableMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max size of the Class Table"
::= { agentDiffServGenStatusGroup 3 }
agentDiffServGenStatusClassRuleTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current size of Class Rule Table"
::= { agentDiffServGenStatusGroup 4 }
agentDiffServGenStatusClassRuleTableMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max size of the Class Rule Table."
::= { agentDiffServGenStatusGroup 5 }
agentDiffServGenStatusPolicyTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current Size of the Policy Table."
::= { agentDiffServGenStatusGroup 6 }
agentDiffServGenStatusPolicyTableMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max size of the Policy Table"
::= { agentDiffServGenStatusGroup 7 }
agentDiffServGenStatusPolicyInstTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current size of the Policy-Class Instance Table"
::= { agentDiffServGenStatusGroup 8 }
agentDiffServGenStatusPolicyInstTableMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max size of the Policy-Class Instance Table"
::= { agentDiffServGenStatusGroup 9 }
agentDiffServGenStatusPolicyAttrTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current size of the Policy Attribute Table"
::= { agentDiffServGenStatusGroup 10 }
agentDiffServGenStatusPolicyAttrTableMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max size of the Policy Attribute Table"
::= { agentDiffServGenStatusGroup 11 }
agentDiffServGenStatusServiceTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current size of the Service Table"
::= { agentDiffServGenStatusGroup 12 }
agentDiffServGenStatusServiceTableMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max size of the Service Table"
::= { agentDiffServGenStatusGroup 13 }
--**********************************************************************************
-- agentDiffServClassGroup
--
--**********************************************************************************
agentDiffServClassGroup OBJECT IDENTIFIER ::= { agentQOSDiffServPrivate 2 }
--*********************** classTable ***********************
agentDiffServClassIndexNextFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for classIndex, or a
zero to indicate that none exists."
::= { agentDiffServClassGroup 1 }
agentDiffServClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DiffServ class entries"
::= { agentDiffServClassGroup 2 }
agentDiffServClassEntry OBJECT-TYPE
SYNTAX AgentDiffServClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a DiffServ traffic class"
INDEX { agentDiffServClassIndex }
::= { agentDiffServClassTable 1 }
AgentDiffServClassEntry ::= SEQUENCE {
agentDiffServClassIndex
Unsigned32,
agentDiffServClassName
DisplayString,
agentDiffServClassType
INTEGER,
agentDiffServClassAclNum
Unsigned32,
agentDiffServClassRuleIndexNextFree
Unsigned32,
agentDiffServClassStorageType
StorageType,
agentDiffServClassRowStatus
RowStatus,
agentDiffServClassAclType
INTEGER
}
agentDiffServClassIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier for DiffServ Class entry "
::= { agentDiffServClassEntry 1 }
agentDiffServClassName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the DiffServ traffic class"
::= { agentDiffServClassEntry 2 }
agentDiffServClassType OBJECT-TYPE
SYNTAX INTEGER {
all(1),
any(2),
acl(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The class type indicates how the individual class match
criteria are evaluated. For type all, all of the
individual match conditions must be true for a packet to
be considered a member of the class. For types any and
acl, only one of the match criteria must be true for a
packet to belong to the class; multiple matching criteria
are evaluated in a sequential order, with the highest
precedence awarded to the first criterion defined for the
class. An acl class type copies its set of match criteria
from the current rule definition of the specified
ACL number."
::= { agentDiffServClassEntry 3 }
agentDiffServClassAclNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The access list number used to define the match conditions for the
DiffServ class.
This attribute is only valid if the value of agentDiffServClassType
is set to acl(3). Match conditions are copied from the ACL definition
at the time the class is created and do not reflect subsequent
changes to the ACL definition.
This attribute requires that the agentDiffServClassAclType object
also be set so that the ACL number can be interpreted relative to
ip(1) or mac(2) ACLs. The objects may be set in either order.
The NETGEAR-QOS-ACL-MIB defines an aclIndex for IP ACLs and an
aclMacIndex for MAC ACLs. Setting this object to one of these
values per the agentDiffServClassAclType causes the corresponding
ACL rules to be used for creating the DiffServ class."
::= { agentDiffServClassEntry 4 }
agentDiffServClassRuleIndexNextFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for classRuleIndex, or a
zero to indicate that none exists. This index is maintained
on a per-class basis."
::= { agentDiffServClassEntry 5 }
agentDiffServClassStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Storage-type for this conceptual row"
DEFVAL { nonVolatile }
::= { agentDiffServClassEntry 6 }
agentDiffServClassRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Entries can not be deleted until all rows in
agentDiffServClassRuleTable with corresponding values of agentDiffServClassIndex
have been deleted."
::= { agentDiffServClassEntry 7 }
agentDiffServClassAclType OBJECT-TYPE
SYNTAX INTEGER {
ip(1),
mac(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The access list type used to define the match conditions for the
DiffServ class. This attribute is only valid if the value of
agentDiffServClassType is set to acl(3).
When this attribute is set to ip(1), the agentDiffServClassAclNum
object is interpreted as an IP ACL number per the aclIndex definition
from the NETGEAR-QOS-ACL-MIB. When set to mac(2), the agentDiffServClassAclNum
object is interpreted as a MAC ACL index per the aclMacIndex definition
in the NETGEAR-QOS-ACL-MIB. Both this object and agentDiffServClassAclNum
must be set (in either order) for an agentDiffServClassType of acl(3)."
::= { agentDiffServClassEntry 8 }
--*********************** agentDiffServClassRuleTable ***********************
agentDiffServClassRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServClassRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DiffServ Class Rule entries"
::= { agentDiffServClassGroup 3 }
agentDiffServClassRuleEntry OBJECT-TYPE
SYNTAX AgentDiffServClassRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a set of class-match rules"
INDEX { agentDiffServClassIndex,agentDiffServClassRuleIndex }
::= { agentDiffServClassRuleTable 1 }
AgentDiffServClassRuleEntry ::= SEQUENCE {
agentDiffServClassRuleIndex
Unsigned32,
agentDiffServClassRuleMatchEntryType
INTEGER,
agentDiffServClassRuleMatchCos
Unsigned32,
agentDiffServClassRuleMatchDstIpAddr
IpAddress,
agentDiffServClassRuleMatchDstIpMask
IpAddress,
agentDiffServClassRuleMatchDstL4PortStart
InetPortNumber,
agentDiffServClassRuleMatchDstL4PortEnd
InetPortNumber,
agentDiffServClassRuleMatchDstMacAddr
MacAddress,
agentDiffServClassRuleMatchDstMacMask
MacAddress,
agentDiffServClassRuleMatchEvery
TruthValue,
agentDiffServClassRuleMatchIpDscp
Unsigned32,
agentDiffServClassRuleMatchIpPrecedence
Unsigned32,
agentDiffServClassRuleMatchIpTosBits
OCTET STRING,
agentDiffServClassRuleMatchIpTosMask
OCTET STRING,
agentDiffServClassRuleMatchProtocolNum
Unsigned32,
agentDiffServClassRuleMatchRefClassIndex
Unsigned32,
agentDiffServClassRuleMatchSrcIpAddr
IpAddress,
agentDiffServClassRuleMatchSrcIpMask
IpAddress,
agentDiffServClassRuleMatchSrcL4PortStart
InetPortNumber,
agentDiffServClassRuleMatchSrcL4PortEnd
InetPortNumber,
agentDiffServClassRuleMatchSrcMacAddr
MacAddress,
agentDiffServClassRuleMatchSrcMacMask
MacAddress,
agentDiffServClassRuleMatchVlanId
Unsigned32,
agentDiffServClassRuleMatchExcludeFlag
TruthValue,
agentDiffServClassRuleStorageType
StorageType,
agentDiffServClassRuleRowStatus
RowStatus,
agentDiffServClassRuleMatchCos2
Unsigned32,
agentDiffServClassRuleMatchEtypeKey
INTEGER,
agentDiffServClassRuleMatchEtypeValue
EtypeValue,
agentDiffServClassRuleMatchVlanIdStart
Unsigned32,
agentDiffServClassRuleMatchVlanIdEnd
Unsigned32,
agentDiffServClassRuleMatchVlanId2Start
Unsigned32,
agentDiffServClassRuleMatchVlanId2End
Unsigned32
}
agentDiffServClassRuleIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier for DiffServ Class Rule Table entry within a class"
::= { agentDiffServClassRuleEntry 1 }
agentDiffServClassRuleMatchEntryType OBJECT-TYPE
SYNTAX INTEGER {
cos(1),
dstip(2),
dstl4port(3),
dstmac(4),
every(5),
ipdscp(6),
ipprecedence(7),
iptos(8),
protocol(9),
refclass(10),
srcip(11),
srcl4port(12),
srcmac(13),
vlan(14),
cos2(15),
etype(16),
vlanid(17),
vlanid2(18)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Class Rule match entry type, it determines which one of the individual
match conditions is defined for the present class rule. This object must
be created before any other match object in this row."
::= { agentDiffServClassRuleEntry 2 }
agentDiffServClassRuleMatchCos OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Three-bit user priority field in the 802.1Q tag header of a tagged
Ethernet frame used as a class-match parameter - only valid if the
agentDiffServClassRuleMatchEntryType is set to cos(1). For frames
containing a double VLAN tag, this field is located in the first/outer
tag."
::= { agentDiffServClassRuleEntry 3 }
agentDiffServClassRuleMatchDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstip(2)."
::= { agentDiffServClassRuleEntry 4 }
agentDiffServClassRuleMatchDstIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstip(2). This mask value
identifies the portion of agentDiffServClassRuleMatchDstIpAddr that is
compared against a packet. A non-contiguous mask value is permitted."
::= { agentDiffServClassRuleEntry 5 }
agentDiffServClassRuleMatchDstL4PortStart OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination layer 4 port range start match value for the class - only
valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3)."
::= { agentDiffServClassRuleEntry 6 }
agentDiffServClassRuleMatchDstL4PortEnd OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination layer 4 port range end match value for the class - only valid
if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3)."
::= { agentDiffServClassRuleEntry 7 }
agentDiffServClassRuleMatchDstMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstmac(4)."
::= { agentDiffServClassRuleEntry 8 }
agentDiffServClassRuleMatchDstMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to dstmac(4). This mask value
identifies the portion of agentDiffServClassRuleMatchDstMacAddr that is
compared against a packet. A non-contiguous mask value is permitted."
::= { agentDiffServClassRuleEntry 9 }
agentDiffServClassRuleMatchEvery OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flag to indicate that the class rule is defined to match on every packet,
regardless of content. - only valid if the
agentDiffServClassRuleMatchEntryType is set to every(5)."
::= { agentDiffServClassRuleEntry 10 }
agentDiffServClassRuleMatchIpDscp OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP DiffServ Code Point (DSCP) match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP
is defined as the high-order six bits of the Service Type octet in the
IPv4 header."
::= { agentDiffServClassRuleEntry 11 }
agentDiffServClassRuleMatchIpPrecedence OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Precedence match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to ipprecedence(7).
The Precedence bits are defined as the high-order three bits of
the Service Type octed in the IPv4 header."
::= { agentDiffServClassRuleEntry 12 }
agentDiffServClassRuleMatchIpTosBits OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP TOS bits match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to iptos(8).
The TOS bits are defined as all eight bits of the Service
Type octet in the IPv4 header."
::= { agentDiffServClassRuleEntry 13 }
agentDiffServClassRuleMatchIpTosMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP TOS bits mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to iptos(8). This mask value
identifies the portion of agentDiffServClassRuleMatchIpTosBits that
is compared against a packet. A non-contiguous mask value is permitted."
::= { agentDiffServClassRuleEntry 14 }
agentDiffServClassRuleMatchProtocolNum OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol number match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to protocol(9)."
::= { agentDiffServClassRuleEntry 15 }
agentDiffServClassRuleMatchRefClassIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the corresponding referenced class - only valid if the
agentDiffServClassRuleMatchEntryType is set to refclass(10).
The set of match conditions defined for the reference class
are directly inherited by the current class.
Restrictions: 1) The class types of both, current class and
the reference class must be identical (i.e., any vs. any,
or all vs. all).
2) Self-referencing of class-name is not allowed.
3) Any attempt to delete the reference class while still
referenced by any class shall fail.
4) The combined match criteria of classname and reference class
name must be an allowed combination based on the class type.
Any subsequent changes to the reference class name match
criteria must maintain this validity, or the change attempt
shall fail."
::= { agentDiffServClassRuleEntry 16 }
agentDiffServClassRuleMatchSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcip(11)."
::= { agentDiffServClassRuleEntry 17 }
agentDiffServClassRuleMatchSrcIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcip(11). This mask value
identifies the portion of agentDiffServClassRuleMatchSrcIpAddr that
is compared against a packet. A non-contiguous mask value is permitted."
::= { agentDiffServClassRuleEntry 18 }
agentDiffServClassRuleMatchSrcL4PortStart OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source layer 4 port range start match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to srcl4port(12)."
::= { agentDiffServClassRuleEntry 19 }
agentDiffServClassRuleMatchSrcL4PortEnd OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source layer 4 port range end match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to srcl4port(12)."
::= { agentDiffServClassRuleEntry 20 }
agentDiffServClassRuleMatchSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC address match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcmac(13)."
::= { agentDiffServClassRuleEntry 21 }
agentDiffServClassRuleMatchSrcMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC address mask match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to srcmac(13). This mask value
identifies the portion of agentDiffServClassRuleMatchSrcMacAddr that
is compared against a packet. A non-contiguous mask value is permitted."
::= { agentDiffServClassRuleEntry 22 }
agentDiffServClassRuleMatchVlanId OBJECT-TYPE
SYNTAX Unsigned32 (1..4094)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"VLAN ID match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to vlan(14).
This object is obsoleted by agentDiffServClassRuleMatchVlanIdStart
and agentDiffServClassRuleMatchVlanIdEnd."
::= { agentDiffServClassRuleEntry 23 }
agentDiffServClassRuleMatchExcludeFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Class Rule exclude flag - when set to true(1), the match condition
identified by agentDiffServClassRuleMatchEntryType is negated. This means
that for a given field, every value is considered to be a match EXCEPT for
the value specified in the class rule. This flag must be false(2) for an
agendDiffServClassRuleMatchEntryType of refClass(10).
This object must be set after the agentDiffServClassRuleMatchEntryType
object, but before any other match object in this row"
::= { agentDiffServClassRuleEntry 24 }
agentDiffServClassRuleStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Storage-type for this conceptual row"
DEFVAL { nonVolatile }
::= { agentDiffServClassRuleEntry 25 }
agentDiffServClassRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { agentDiffServClassRuleEntry 26 }
agentDiffServClassRuleMatchCos2 OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Three-bit user priority field in the second/inner 802.1Q tag header of a
double VLAN tagged Ethernet frame used as a class-match parameter
- only valid if the agentDiffServClassRuleMatchEntryType is set to
cos2(15)."
::= { agentDiffServClassRuleEntry 27 }
agentDiffServClassRuleMatchEtypeKey OBJECT-TYPE
SYNTAX INTEGER {
custom(1),
appletalk(2),
arp(3),
ibmsna(4),
ipv4(5),
ipv6(6),
ipx(7),
mplsmcast(8),
mplsucast(9),
netbios(10),
novell(11),
pppoe(12),
rarp(13)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ethertype keyword match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to etype(16). A keyword
of custom(1) requires that the agentDiffServClassRuleMatchEtypeValue
object also be set."
::= { agentDiffServClassRuleEntry 28 }
agentDiffServClassRuleMatchEtypeValue OBJECT-TYPE
SYNTAX EtypeValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ethertype match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to etype(16) and
the agentDiffServClassRuleMatchEtypeKey is set to custom(1).
The allowed value for this object is 0x0600 to 0xFFFF."
::= { agentDiffServClassRuleEntry 29 }
agentDiffServClassRuleMatchVlanIdStart OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID range start match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to vlanid(17).
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame."
::= { agentDiffServClassRuleEntry 30 }
agentDiffServClassRuleMatchVlanIdEnd OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN ID range end match value for the class - only valid if
the agentDiffServClassRuleMatchEntryType is set to vlanid(17).
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame."
::= { agentDiffServClassRuleEntry 31 }
agentDiffServClassRuleMatchVlanId2Start OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Secondary VLAN ID range start match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to vlanid2(18).
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame."
::= { agentDiffServClassRuleEntry 32 }
agentDiffServClassRuleMatchVlanId2End OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Secondary VLAN ID range end match value for the class - only valid if the
agentDiffServClassRuleMatchEntryType is set to vlanid2(18).
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame."
::= { agentDiffServClassRuleEntry 33 }
--**********************************************************************************
-- agentDiffServPolicyGroup
--
--**********************************************************************************
agentDiffServPolicyGroup OBJECT IDENTIFIER ::= { agentQOSDiffServPrivate 3 }
--*********************** agentDiffServPolicyTable ************************
agentDiffServPolicyIndexNextFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for agentDiffServPolicyIndex, or a
zero to indicate that none exists."
::= { agentDiffServPolicyGroup 1 }
agentDiffServPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the DiffServ policy entries."
::= { agentDiffServPolicyGroup 2 }
agentDiffServPolicyEntry OBJECT-TYPE
SYNTAX AgentDiffServPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a DiffServ policy."
INDEX { agentDiffServPolicyIndex }
::= { agentDiffServPolicyTable 1 }
AgentDiffServPolicyEntry ::= SEQUENCE {
agentDiffServPolicyIndex
Unsigned32,
agentDiffServPolicyName
DisplayString,
agentDiffServPolicyType
IntfDirection,
agentDiffServPolicyInstIndexNextFree
Unsigned32,
agentDiffServPolicyStorageType
StorageType,
agentDiffServPolicyRowStatus
RowStatus
}
agentDiffServPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier for DiffServ Policy table entry."
::= { agentDiffServPolicyEntry 1 }
agentDiffServPolicyName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the policy"
::= { agentDiffServPolicyEntry 2 }
agentDiffServPolicyType OBJECT-TYPE
SYNTAX IntfDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The policy type dictates whether inbound or outbound policy
attribute statements are used in the policy definition."
::= { agentDiffServPolicyEntry 3 }
agentDiffServPolicyInstIndexNextFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for agentDiffServPolicyInstIndex, or
a zero to indicate that none exists. This index is maintained on a
per-policy basis."
::= { agentDiffServPolicyEntry 4 }
agentDiffServPolicyStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Storage-type for this conceptual row"
DEFVAL { nonVolatile }
::= { agentDiffServPolicyEntry 5 }
agentDiffServPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Entries can not be deleted until all rows in
agentDiffServPolicyInstTable with corresponding values of agentDiffServPolicyIndex
have been deleted."
::= { agentDiffServPolicyEntry 6 }
--*********************** agentDiffServPolicyInstTable ************************
agentDiffServPolicyInstTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServPolicyInstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the policy-class instance entries."
::= { agentDiffServPolicyGroup 3 }
agentDiffServPolicyInstEntry OBJECT-TYPE
SYNTAX AgentDiffServPolicyInstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for a policy-class instance."
INDEX { agentDiffServPolicyIndex,agentDiffServPolicyInstIndex }
::= { agentDiffServPolicyInstTable 1 }
AgentDiffServPolicyInstEntry ::= SEQUENCE {
agentDiffServPolicyInstIndex
Unsigned32,
agentDiffServPolicyInstClassIndex
Unsigned32,
agentDiffServPolicyInstAttrIndexNextFree
Unsigned32,
agentDiffServPolicyInstStorageType
StorageType,
agentDiffServPolicyInstRowStatus
RowStatus
}
agentDiffServPolicyInstIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier for policy-class Instance table entry within a policy."
::= { agentDiffServPolicyInstEntry 1 }
agentDiffServPolicyInstClassIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the DiffServ Class Table row, whose class definition is used
as the policy class instance. The class index identifies the classifier
definition used by the policy to establish an instance of that class
(to which policy attributes can be attached). This is what connects a
class (instance) to a policy."
::= { agentDiffServPolicyInstEntry 2 }
agentDiffServPolicyInstAttrIndexNextFree OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an unused value for agentDiffServPolicyAttrIndex, or
a zero to indicate that none exists. This index is maintained on a
per-policy-class-instance basis."
::= { agentDiffServPolicyInstEntry 3 }
agentDiffServPolicyInstStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Storage-type for this conceptual row."
DEFVAL { nonVolatile }
::= { agentDiffServPolicyInstEntry 4 }
agentDiffServPolicyInstRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Entries can not be deleted until all rows in
agentDiffServPolicyAttrTable with corresponding values of agentDiffServPolicyIndex
and agentDiffServPolicyInstIndex have been deleted."
::= { agentDiffServPolicyInstEntry 5 }
--*********************** agentDiffServPolicyAttrTable ************************
agentDiffServPolicyAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServPolicyAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of policy attribute entries"
::= { agentDiffServPolicyGroup 4 }
agentDiffServPolicyAttrEntry OBJECT-TYPE
SYNTAX AgentDiffServPolicyAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for policy attributes"
INDEX { agentDiffServPolicyIndex, agentDiffServPolicyInstIndex,
agentDiffServPolicyAttrIndex }
::= { agentDiffServPolicyAttrTable 1 }
AgentDiffServPolicyAttrEntry ::= SEQUENCE {
agentDiffServPolicyAttrIndex
Unsigned32,
agentDiffServPolicyAttrStmtEntryType
INTEGER,
agentDiffServPolicyAttrStmtBandwidthCrate
Unsigned32,
agentDiffServPolicyAttrStmtBandwidthCrateUnits
INTEGER,
agentDiffServPolicyAttrStmtExpediteCrate
Unsigned32,
agentDiffServPolicyAttrStmtExpediteCrateUnits
INTEGER,
agentDiffServPolicyAttrStmtExpediteCburst
QosBurstSize,
agentDiffServPolicyAttrStmtMarkCosVal
Unsigned32,
agentDiffServPolicyAttrStmtMarkIpDscpVal
Unsigned32,
agentDiffServPolicyAttrStmtMarkIpPrecedenceVal
Unsigned32,
agentDiffServPolicyAttrStmtPoliceConformAct
INTEGER,
agentDiffServPolicyAttrStmtPoliceConformVal
Unsigned32,
agentDiffServPolicyAttrStmtPoliceExceedAct
INTEGER,
agentDiffServPolicyAttrStmtPoliceExceedVal
Unsigned32,
agentDiffServPolicyAttrStmtPoliceNonconformAct
INTEGER,
agentDiffServPolicyAttrStmtPoliceNonconformVal
Unsigned32,
agentDiffServPolicyAttrStmtPoliceSimpleCrate
Unsigned32,
agentDiffServPolicyAttrStmtPoliceSimpleCburst
QosBurstSize,
agentDiffServPolicyAttrStmtPoliceSinglerateCrate
Unsigned32,
agentDiffServPolicyAttrStmtPoliceSinglerateCburst
QosBurstSize,
agentDiffServPolicyAttrStmtPoliceSinglerateEburst
QosBurstSize,
agentDiffServPolicyAttrStmtPoliceTworateCrate
Unsigned32,
agentDiffServPolicyAttrStmtPoliceTworateCburst
QosBurstSize,
agentDiffServPolicyAttrStmtPoliceTworatePrate
Unsigned32,
agentDiffServPolicyAttrStmtPoliceTworatePburst
QosBurstSize,
agentDiffServPolicyAttrStmtRandomdropMinThresh
Unsigned32,
agentDiffServPolicyAttrStmtRandomdropMaxThresh
Unsigned32,
agentDiffServPolicyAttrStmtRandomdropMaxDropProb
Unsigned32,
agentDiffServPolicyAttrStmtRandomdropSamplingRate
Unsigned32,
agentDiffServPolicyAttrStmtRandomdropDecayExponent
Unsigned32,
agentDiffServPolicyAttrStmtShapeAverageCrate
Unsigned32,
agentDiffServPolicyAttrStmtShapePeakCrate
Unsigned32,
agentDiffServPolicyAttrStmtShapePeakPrate
Unsigned32,
agentDiffServPolicyAttrStorageType
StorageType,
agentDiffServPolicyAttrRowStatus
RowStatus,
agentDiffServPolicyAttrStmtAssignQueueId
Unsigned32,
agentDiffServPolicyAttrStmtDrop
TruthValue,
agentDiffServPolicyAttrStmtMarkCos2Val
Unsigned32,
agentDiffServPolicyAttrStmtPoliceColorConformIndex
Unsigned32,
agentDiffServPolicyAttrStmtPoliceColorConformMode
INTEGER,
agentDiffServPolicyAttrStmtPoliceColorConformVal
Unsigned32,
agentDiffServPolicyAttrStmtPoliceColorExceedIndex
Unsigned32,
agentDiffServPolicyAttrStmtPoliceColorExceedMode
INTEGER,
agentDiffServPolicyAttrStmtPoliceColorExceedVal
Unsigned32,
agentDiffServPolicyAttrStmtRedirectIntf
InterfaceIndex
}
agentDiffServPolicyAttrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier for policy-attribute entry "
::= { agentDiffServPolicyAttrEntry 1 }
agentDiffServPolicyAttrStmtEntryType OBJECT-TYPE
SYNTAX INTEGER {
bandwidth(1),
expedite(2),
markCosVal(3),
markIpDscpVal(4),
markIpPrecedenceVal(5),
policeSimple(6),
policeSinglerate(7),
policeTworate(8),
randomdrop(9),
shapeAverage(10),
shapePeak(11),
assignQueue(12),
drop(13),
markCos2Val(14),
redirect(15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Policy attribute statement entry type -- this entry type is
essential to determine which of the individual object(s)
is defined for this policy attribute statement. This object must be
created before any other policy attribute statement object in the row.
The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6),
policeSinglerate(7) and policeTworate(8) values are only allowed for an
agentDiffServPolicyType of in(1). The remaining values are only allowed
for an agentDiffServPolicyType of out(2)."
::= { agentDiffServPolicyAttrEntry 2 }
agentDiffServPolicyAttrStmtBandwidthCrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Bandwidth committed rate attribute statement value -- identifies
the minimum amount of bandwidth to be reserved for the specified
class instance within the policy. This attribute is only valid if
the value of agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1)."
::= { agentDiffServPolicyAttrEntry 3 }
agentDiffServPolicyAttrStmtBandwidthCrateUnits OBJECT-TYPE
SYNTAX INTEGER {
kbps(1),
percentage(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Bandwidth committed rate units attribute statement value -- this value
determines the interpretation of the
agentDiffServPolicyAttrStmtBandwidthCrate object as either
kilobits-per-second or as a percentage of interface link speed. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1)."
::= { agentDiffServPolicyAttrEntry 4 }
agentDiffServPolicyAttrStmtExpediteCrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Expedited (bandwidth) committed rate attribute statement value -- it
identifies the maximum guaranteed amount of bandwidth to be reserved for
the specified class instance within the policy. This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is set to
expedite(2). "
::= { agentDiffServPolicyAttrEntry 5 }
agentDiffServPolicyAttrStmtExpediteCrateUnits OBJECT-TYPE
SYNTAX INTEGER {
kbps(1),
percentage(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Expedited (bandwidth) committed rate units attribute statement value
-- determines the interpretation of the
agentDiffServPolicyAttrStmtExpediteCrate object as either
kilobits-per-second or as a percentage of interface link speed. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to expedite(2)."
::= { agentDiffServPolicyAttrEntry 6 }
agentDiffServPolicyAttrStmtExpediteCburst OBJECT-TYPE
SYNTAX QosBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Expedited (bandwidth) committed burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to expedite(2)."
DEFVAL { 4 }
::= { agentDiffServPolicyAttrEntry 7 }
agentDiffServPolicyAttrStmtMarkCosVal OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Three-bit user priority field value in the 802.1Q tag header of a tagged
Ethernet frame, marked as part of the inbound policy for a class instance.
For frames containing a double VLAN tag, this field is located in the
first/outer tag. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3)."
::= { agentDiffServPolicyAttrEntry 8 }
agentDiffServPolicyAttrStmtMarkIpDscpVal OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specified IP DSCP value to mark in all inbound packets belonging to the
class-instance. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4)."
::= { agentDiffServPolicyAttrEntry 9 }
agentDiffServPolicyAttrStmtMarkIpPrecedenceVal OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specified IP Precedence value to mark in all inbound packets belonging to
the class-instance. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5)."
::= { agentDiffServPolicyAttrEntry 10 }
agentDiffServPolicyAttrStmtPoliceConformAct OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
markdscp(2),
markprec(3),
send(4),
markcos(5),
markcos2(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Policing conform action attribute statement value -- determines
the action taken on conforming traffic for the policing style
(simple,singlerate,tworate) currently configured for the specified
class instance within the policy. The default conform action is send(3).
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8)."
DEFVAL { send }
::= { agentDiffServPolicyAttrEntry 11 }
agentDiffServPolicyAttrStmtPoliceConformVal OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Policing conform value attribute statement --
used to mark conforming packets when the conform action
is one of the following:
markdscp(2) - mark IP DSCP field
markprec(3) - mark IP Precedence field
markcos(5) - mark 802.1p CoS field (first/only tag)
markcos2(6) - mark secondary 802.1p CoS field (inner tag)
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8)."
::= { agentDiffServPolicyAttrEntry 12 }
agentDiffServPolicyAttrStmtPoliceExceedAct OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
markdscp(2),
markprec(3),
send(4),
markcos(5),
markcos2(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Policing exceed action attribute statement value -- determines
the action taken on excess traffic for the policing style (singlerate,
tworate) currently configured for the specified class instance within the
policy. The default exceed action is drop(1). This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is
policeSinglerate(7) or policeTworate(8)."
DEFVAL { drop }
::= { agentDiffServPolicyAttrEntry 13 }
agentDiffServPolicyAttrStmtPoliceExceedVal OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Policing exceed value attribute statement --
used to mark excess packets when the exceed action
is one of the following:
markdscp(2) - mark IP DSCP field
markprec(3) - mark IP Precedence field
markcos(5) - mark 802.1p CoS field (first/only tag)
markcos2(6) - mark secondary 802.1p CoS field (inner tag)
This is only valid if the value of agentDiffServPolicyAttrStmtEntryType is
policeSinglerate(7) or policeTworate(8)."
::= { agentDiffServPolicyAttrEntry 14 }
agentDiffServPolicyAttrStmtPoliceNonconformAct OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
markdscp(2),
markprec(3),
send(4),
markcos(5),
markcos2(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Policing non-conform action attribute statement value -- determines the
action taken on nonconforming traffic for the policing style (simple,
singlerate,tworate) currently configured for the specified class instance
within the policy. The default non-conform action is drop(1). This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8)."
DEFVAL { drop }
::= { agentDiffServPolicyAttrEntry 15 }
agentDiffServPolicyAttrStmtPoliceNonconformVal OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Policing non-conform value attribute statement --
used to mark nonconforming packets when the nonconform action
is one of the following:
markdscp(2) - mark IP DSCP field
markprec(3) - mark IP Precedence field
markcos(5) - mark 802.1p CoS field (first/only tag)
markcos2(6) - mark secondary 802.1p CoS field (inner tag)
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8)."
::= { agentDiffServPolicyAttrEntry 16 }
agentDiffServPolicyAttrStmtPoliceSimpleCrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Simple policing committed rate attribute statement value, specified in
kbps. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6)."
::= { agentDiffServPolicyAttrEntry 17 }
agentDiffServPolicyAttrStmtPoliceSimpleCburst OBJECT-TYPE
SYNTAX QosBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Simple policing committed burst size attribute statement value, specified
in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6)."
::= { agentDiffServPolicyAttrEntry 18 }
agentDiffServPolicyAttrStmtPoliceSinglerateCrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Single-rate policing committed rate attribute statement value, specified
in kbps. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7)."
::= { agentDiffServPolicyAttrEntry 19 }
agentDiffServPolicyAttrStmtPoliceSinglerateCburst OBJECT-TYPE
SYNTAX QosBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Single-rate policing committed burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7)."
::= { agentDiffServPolicyAttrEntry 20 }
agentDiffServPolicyAttrStmtPoliceSinglerateEburst OBJECT-TYPE
SYNTAX QosBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Single-rate policing excess burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7)."
::= { agentDiffServPolicyAttrEntry 21 }
agentDiffServPolicyAttrStmtPoliceTworateCrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Two-rate policing committed rate attribute statement value, specified in
kbps. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8)."
::= { agentDiffServPolicyAttrEntry 22 }
agentDiffServPolicyAttrStmtPoliceTworateCburst OBJECT-TYPE
SYNTAX QosBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Two-rate policing committed burst size attribute statement value,
specified in Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8)."
::= { agentDiffServPolicyAttrEntry 23 }
agentDiffServPolicyAttrStmtPoliceTworatePrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Two-rate policing peak rate attribute statement value, specified in kbps.
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8)."
::= { agentDiffServPolicyAttrEntry 24 }
agentDiffServPolicyAttrStmtPoliceTworatePburst OBJECT-TYPE
SYNTAX QosBurstSize
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Two-rate policing peak burst size attribute statement value, specified in
Kbytes. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8)."
::= { agentDiffServPolicyAttrEntry 25 }
agentDiffServPolicyAttrStmtRandomdropMinThresh OBJECT-TYPE
SYNTAX Unsigned32 (1..250000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Random drop minimum threshold attribute statement value -- the average
queue depth minimum threshold in bytes used by the WRED algorithm. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9)."
::= { agentDiffServPolicyAttrEntry 26 }
agentDiffServPolicyAttrStmtRandomdropMaxThresh OBJECT-TYPE
SYNTAX Unsigned32 (1..500000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Random drop maximum threshold attribute statement value -- the average
queue depth maximum threshold in bytes used by the WRED algorithm. This
attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9)."
::= { agentDiffServPolicyAttrEntry 27 }
agentDiffServPolicyAttrStmtRandomdropMaxDropProb OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Random drop maximum drop probability attribute statement value -- the
packet drop probability when the queue depth average reaches its maximum
threshold. It is expressed as a percentage, and is an integer from 0 to
100. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9)."
::= { agentDiffServPolicyAttrEntry 28 }
agentDiffServPolicyAttrStmtRandomdropSamplingRate OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Random drop sampling rate attribute statement value -- the period at which
the queue depth is sampled for computing an average, expressed in
microseconds. This value is an integer from 0 to 1000000, with a default
value of 0 (meaning per packet sampling). This attribute is only valid if
the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9)."
DEFVAL { 0 }
::= { agentDiffServPolicyAttrEntry 29 }
agentDiffServPolicyAttrStmtRandomdropDecayExponent OBJECT-TYPE
SYNTAX Unsigned32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Random drop decay exponent attribute statement value -- determines how
quickly the average queue length calculation decays over time, with a
higher number causing a slower decay. This value is an integer from 0 to
16, with a default of 9. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9)."
DEFVAL { 9 }
::= { agentDiffServPolicyAttrEntry 30 }
agentDiffServPolicyAttrStmtShapeAverageCrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Average-rate shaping committed rate attribute statement value, specified
in kbps -- used to establish average rate traffic shaping for the
specified class , which limits transmissions for the class to the
committed information rate, with any excess traffic delayed via queueing.
This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10)."
::= { agentDiffServPolicyAttrEntry 31 }
agentDiffServPolicyAttrStmtShapePeakCrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak-rate shaping committed rate attribute statement value, specified in
kbps -- used to establish peak rate traffic shaping for the specified
class , which allows transmissions for the class to exceed the committed
information rate by sending excess traffic with the understanding that it
could be dropped by a downstream network element. This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is set to
shapePeak(11)."
::= { agentDiffServPolicyAttrEntry 32 }
agentDiffServPolicyAttrStmtShapePeakPrate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak-rate shaping peak rate attribute statement value, specified in kbps
-- used to establish peak rate traffic shaping for the specified class,
which allows transmissions for the class to exceed the committed
information rate by sending excess traffic with the understanding that it
could be dropped by a downstream network element. This attribute is only
valid if the value of agentDiffServPolicyAttrStmtEntryType is set to
shapePeak(11)."
::= { agentDiffServPolicyAttrEntry 33 }
agentDiffServPolicyAttrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Storage-type for this conceptual row."
DEFVAL { nonVolatile }
::= { agentDiffServPolicyAttrEntry 34 }
agentDiffServPolicyAttrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { agentDiffServPolicyAttrEntry 35 }
agentDiffServPolicyAttrStmtAssignQueueId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Queue identifier to which all inbound packets belonging to this
class-instance are directed. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to assignQueue(12)."
::= { agentDiffServPolicyAttrEntry 36 }
agentDiffServPolicyAttrStmtDrop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flag to indicate that all inbound packets belonging to this
class-instance are dropped at ingress. This attribute is
only valid if the agentDiffServPolicyAttrStmtEntryType is
set to drop(13)."
::= { agentDiffServPolicyAttrEntry 37 }
agentDiffServPolicyAttrStmtMarkCos2Val OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Three-bit user priority field value in the second/inner 802.1Q tag header of
a double VLAN tagged Ethernet frame, marked as part of the inbound policy
for a class instance. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is set to markCos2Val(14)."
::= { agentDiffServPolicyAttrEntry 38 }
agentDiffServPolicyAttrStmtPoliceColorConformIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the DiffServ Class Table row whose class definition is used
to specify the policing color conform mode and value. This identifies
incoming traffic categorized as 'green' packets in the
network. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSimple(6),
policeSinglerate(7), or policeTworate(8).
The DiffServ class referred to by this object must comply with
the following restrictions:
1) Contains only a single, non-excluded match condition identifying
one of the following fields: COS, IP DSCP, IP Precedence, or
Secondary COS, in accordance with platform support capabilities.
This is represented by an agentDiffServClassRuleMatchEntryType value
of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively.
2) Must not conflict with any (non-excluded) match conditions in the
classifier used for this policy-class instance, as indicated by the
agentDiffServPolicyInstClassIndex object.
3) The color conform mode and value identified by this class index must
not be the same as an existing color-aware exceed mode and value
defined by the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object.
A class index value of 0 for this object indicates conform color awareness
is not being used (e.g. color-blind mode). Setting this object to 0 causes
the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object to be set
to 0 as well."
DEFVAL { 0 }
::= { agentDiffServPolicyAttrEntry 39 }
agentDiffServPolicyAttrStmtPoliceColorConformMode OBJECT-TYPE
SYNTAX INTEGER {
blind(1),
cos(2),
cos2(3),
ipdscp(4),
ipprec(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Policing color conform mode -- indicates the color awareness
mode of conforming traffic for the policing style (simple,
singlerate, or tworate) currently configured for the specified
class instance within the policy. The default value is blind(1).
Any value other than blind(1) denotes the packet field to
check for the existing conform color marking, which is compared to the
agentDiffServPolicyAttrStmtPoliceColorConformVal object value. Packets
matching this specification are considered to be colored 'green'.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSimple(6), policeSinglerate(7), or policeTworate(8)."
DEFVAL { blind }
::= { agentDiffServPolicyAttrEntry 40 }
agentDiffServPolicyAttrStmtPoliceColorConformVal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Policing color conform value -- indicates the color awareness
packet mark value of conforming traffic for the policing style
(simple, singlerate, or tworate) currently configured for the
specified class instance within the policy.
For the color conform field indicated by
agentDiffServPolicyAttrStmtPoliceColorConformMode, packets containing
this value are considered to be colored 'green'.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSimple(6), policeSinglerate(7), or policeTworate(8), and
agentDiffServPolicyAttrStmtPoliceColorConformMode values of
cos(2), cos2(3), ipdscp(4), or ipprec(5)."
::= { agentDiffServPolicyAttrEntry 41 }
agentDiffServPolicyAttrStmtPoliceColorExceedIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the DiffServ Class Table row whose class definition is used
to specify the policing color exceed mode and value. This identifies
incoming traffic categorized as 'yellow' packets in the
network. This attribute is only valid if the value of
agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or
policeTworate(8).
The DiffServ class referred to by this object must comply with
the following restrictions:
1) Contains only a single, non-excluded match condition identifying
one of the following fields: COS, IP DSCP, IP Precedence, or
Secondary COS, in accordance with platform support capabilities.
This is represented by an agentDiffServClassRuleMatchEntryType value
of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively.
2) Must not conflict with any (non-excluded) match conditions in the
classifier used for this policy-class instance, as indicated by the
agentDiffServPolicyInstClassIndex object.
3) The color exceed mode and value identified by this class index must
not be the same as an existing color-aware exceed mode and value
defined by the agentDiffServPolicyAttrStmtPoliceColorConformIndex object.
A class index value of 0 for this object indicates exceed color awareness
is not being used. When the agentDiffServPolicyAttrStmtPoliceColorConformIndex
object is 0, indicating color-blind operation, this object must also be 0.
When a non-0 value is used for the agentDiffServPolicyAttrStmtPoliceColorConformIndex
object, this object may remain set to 0 if exceed color awareness is not
desired, or may be set to an appropriate class index value to activate exceed
color aware mode."
DEFVAL { 0 }
::= { agentDiffServPolicyAttrEntry 42 }
agentDiffServPolicyAttrStmtPoliceColorExceedMode OBJECT-TYPE
SYNTAX INTEGER {
blind(1),
cos(2),
cos2(3),
ipdscp(4),
ipprec(5),
unused(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Policing color exceed mode -- indicates the color awareness
mode of exceeding traffic for the policing style (singlerate
or tworate) currently configured for the specified
class instance within the policy. The default value is blind(1).
Any value other than blind(1) or unused(6) denotes the packet field to
check for the existing exceed color marking, which is compared to the
agentDiffServPolicyAttrStmtPoliceColorExceedVal object value. Packets
matching this specification are considered to be colored 'yellow'.
Use of exceed color awareness is optional, and this field is set to
unused(6) when color conform aware policing is used but the color exceed
value is not used. When agentDiffServPolicyAttrStmtPoliceColorConformMode
value is blind(1), this object is blind(1) as well.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSinglerate(7) or policeTworate(8)."
DEFVAL { blind }
::= { agentDiffServPolicyAttrEntry 43 }
agentDiffServPolicyAttrStmtPoliceColorExceedVal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Policing color exceed value -- indicates the color awareness
packet mark value of exceeding traffic for the policing style
(singlerate or tworate) currently configured for the
specified class instance within the policy.
For the color exceed field indicated by
agentDiffServPolicyAttrStmtPoliceColorExceedMode, packets containing
this value are considered to be colored 'yellow'.
This read-only object reflects the DiffServ class definition as indicated by
agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute
is only valid for agentDiffServPolicyAttrStmtEntryType values of
policeSinglerate(7) or policeTworate(8), and
agentDiffServPolicyAttrStmtPoliceColorExceedMode values of
cos(2), cos2(3), ipdscp(4), or ipprec(5)."
::= { agentDiffServPolicyAttrEntry 44 }
agentDiffServPolicyAttrStmtRedirectIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"External interface number to which all inbound packets belonging to this
class-instance are redirected. This attribute is only valid if the
value of agentDiffServPolicyAttrStmtEntryType is set to redirect(15)."
::= { agentDiffServPolicyAttrEntry 45 }
--*********************** agentDiffServPolicyPerfInTable ************************
agentDiffServPolicyPerfInTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServPolicyPerfInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of inbound policy-class performance entries"
::= { agentDiffServPolicyGroup 5 }
agentDiffServPolicyPerfInEntry OBJECT-TYPE
SYNTAX AgentDiffServPolicyPerfInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for the performance attributes of the associated inbound
policy-class instance"
INDEX { agentDiffServPolicyIndex,agentDiffServPolicyInstIndex,ifIndex }
::= { agentDiffServPolicyPerfInTable 1 }
AgentDiffServPolicyPerfInEntry ::= SEQUENCE {
agentDiffServPolicyPerfInOfferedOctets
Counter32,
agentDiffServPolicyPerfInOfferedPackets
Counter32,
agentDiffServPolicyPerfInDiscardedOctets
Counter32,
agentDiffServPolicyPerfInDiscardedPackets
Counter32,
agentDiffServPolicyPerfInHCOfferedOctets
Counter64,
agentDiffServPolicyPerfInHCOfferedPackets
Counter64,
agentDiffServPolicyPerfInHCDiscardedOctets
Counter64,
agentDiffServPolicyPerfInHCDiscardedPackets
Counter64,
agentDiffServPolicyPerfInStorageType
StorageType,
agentDiffServPolicyPerfInRowStatus
RowStatus
}
agentDiffServPolicyPerfInOfferedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered octets count for the inbound policy-class instance performance
entry."
::= { agentDiffServPolicyPerfInEntry 1 }
agentDiffServPolicyPerfInOfferedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered packets count for the inbound policy-class instance performance
entry."
::= { agentDiffServPolicyPerfInEntry 2 }
agentDiffServPolicyPerfInDiscardedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded octets count for the inbound policy-class instance performance
entry."
::= { agentDiffServPolicyPerfInEntry 3 }
agentDiffServPolicyPerfInDiscardedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded packets count for the inbound policy-class instance performance
entry."
::= { agentDiffServPolicyPerfInEntry 4 }
agentDiffServPolicyPerfInHCOfferedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered octets high capacity count for the inbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfInEntry 5 }
agentDiffServPolicyPerfInHCOfferedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered packets high capacity count for the inbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfInEntry 6 }
agentDiffServPolicyPerfInHCDiscardedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded octets high capacity count for the inbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfInEntry 7 }
agentDiffServPolicyPerfInHCDiscardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded packets high capacity count for the inbound policy-class
instance performance entry."
::= { agentDiffServPolicyPerfInEntry 8 }
agentDiffServPolicyPerfInStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Storage-type for this conceptual row."
DEFVAL { nonVolatile }
::= { agentDiffServPolicyPerfInEntry 9 }
agentDiffServPolicyPerfInRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { agentDiffServPolicyPerfInEntry 10 }
--*********************** agentDiffServPolicyPerfOutTable ************************
agentDiffServPolicyPerfOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServPolicyPerfOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of outbound policy-class performance entries"
::= { agentDiffServPolicyGroup 6 }
agentDiffServPolicyPerfOutEntry OBJECT-TYPE
SYNTAX AgentDiffServPolicyPerfOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for the performance attributes of the associated outbound
policy-class instance"
INDEX { agentDiffServPolicyIndex,agentDiffServPolicyInstIndex,ifIndex }
::= { agentDiffServPolicyPerfOutTable 1 }
AgentDiffServPolicyPerfOutEntry ::= SEQUENCE {
agentDiffServPolicyPerfOutTailDroppedOctets
Counter32,
agentDiffServPolicyPerfOutTailDroppedPackets
Counter32,
agentDiffServPolicyPerfOutRandomDroppedOctets
Counter32,
agentDiffServPolicyPerfOutRandomDroppedPackets
Counter32,
agentDiffServPolicyPerfOutShapeDelayedOctets
Counter32,
agentDiffServPolicyPerfOutShapeDelayedPackets
Counter32,
agentDiffServPolicyPerfOutSentOctets
Counter32,
agentDiffServPolicyPerfOutSentPackets
Counter32,
agentDiffServPolicyPerfOutHCTailDroppedOctets
Counter64,
agentDiffServPolicyPerfOutHCTailDroppedPackets
Counter64,
agentDiffServPolicyPerfOutHCRandomDroppedOctets
Counter64,
agentDiffServPolicyPerfOutHCRandomDroppedPackets
Counter64,
agentDiffServPolicyPerfOutHCShapeDelayedOctets
Counter64,
agentDiffServPolicyPerfOutHCShapeDelayedPackets
Counter64,
agentDiffServPolicyPerfOutHCSentOctets
Counter64,
agentDiffServPolicyPerfOutHCSentPackets
Counter64,
agentDiffServPolicyPerfOutStorageType
StorageType,
agentDiffServPolicyPerfOutRowStatus
RowStatus
}
agentDiffServPolicyPerfOutTailDroppedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tail-dropped octets count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 1 }
agentDiffServPolicyPerfOutTailDroppedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tail-dropped packets count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 2 }
agentDiffServPolicyPerfOutRandomDroppedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Random-dropped octets count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 3 }
agentDiffServPolicyPerfOutRandomDroppedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Random-dropped packets count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 4 }
agentDiffServPolicyPerfOutShapeDelayedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shape-delayed octets count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 5 }
agentDiffServPolicyPerfOutShapeDelayedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shape-delayed packets count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 6 }
agentDiffServPolicyPerfOutSentOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent octets count for the outbound policy-class instance performance
entry."
::= { agentDiffServPolicyPerfOutEntry 7 }
agentDiffServPolicyPerfOutSentPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent packets count for the outbound policy-class instance performance
entry."
::= { agentDiffServPolicyPerfOutEntry 8 }
agentDiffServPolicyPerfOutHCTailDroppedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tail-dropped octets high capacity count for the outbound policy-class
instance performance entry."
::= { agentDiffServPolicyPerfOutEntry 9 }
agentDiffServPolicyPerfOutHCTailDroppedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tail-dropped packets high capacity count for the outbound policy-class
instance performance entry."
::= { agentDiffServPolicyPerfOutEntry 10 }
agentDiffServPolicyPerfOutHCRandomDroppedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Random-dropped octets high capacity count for the outbound policy-class
instance performance entry."
::= { agentDiffServPolicyPerfOutEntry 11 }
agentDiffServPolicyPerfOutHCRandomDroppedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Random-dropped packets high capacity count for the outbound policy-class
instance performance entry."
::= { agentDiffServPolicyPerfOutEntry 12 }
agentDiffServPolicyPerfOutHCShapeDelayedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shape-delayed octets high capacity count for the outbound policy-class
instance performance entry."
::= { agentDiffServPolicyPerfOutEntry 13 }
agentDiffServPolicyPerfOutHCShapeDelayedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shape-delayed packets high capacity count for the outbound policy-class
instance performance entry."
::= { agentDiffServPolicyPerfOutEntry 14 }
agentDiffServPolicyPerfOutHCSentOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent octets high capacity count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 15 }
agentDiffServPolicyPerfOutHCSentPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent packets high capacity count for the outbound policy-class instance
performance entry."
::= { agentDiffServPolicyPerfOutEntry 16 }
agentDiffServPolicyPerfOutStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Storage-type for this conceptual row."
DEFVAL { nonVolatile }
::= { agentDiffServPolicyPerfOutEntry 17 }
agentDiffServPolicyPerfOutRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { agentDiffServPolicyPerfOutEntry 18 }
--**********************************************************************************
-- agentDiffServService Group
--
--**********************************************************************************
--*********************** agentDiffServServiceTable ************************
agentDiffServServiceGroup OBJECT IDENTIFIER ::= { agentQOSDiffServPrivate 4 }
agentDiffServServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the service entries."
::= { agentDiffServServiceGroup 1 }
agentDiffServServiceEntry OBJECT-TYPE
SYNTAX AgentDiffServServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents entry for policy assigned to an interface in a particular
direction."
INDEX { agentDiffServServiceIfIndex,agentDiffServServiceIfDirection }
::= { agentDiffServServiceTable 1 }
AgentDiffServServiceEntry ::= SEQUENCE {
agentDiffServServiceIfIndex
InterfaceIndex,
agentDiffServServiceIfDirection
IntfDirection,
agentDiffServServicePolicyIndex
Unsigned32,
agentDiffServServiceIfOperStatus
INTEGER,
agentDiffServServiceStorageType
StorageType,
agentDiffServServiceRowStatus
RowStatus
}
agentDiffServServiceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"External interface number of the interface to which policy is assigned."
::= { agentDiffServServiceEntry 1 }
agentDiffServServiceIfDirection OBJECT-TYPE
SYNTAX IntfDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface direction to which the policy is assigned."
::= { agentDiffServServiceEntry 2 }
agentDiffServServicePolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index of the Policy Table row whose policy definition is attached to the
interface in the specified direction."
::= { agentDiffServServiceEntry 3 }
agentDiffServServiceIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready for DiffServ operation
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the DiffServ service
interface. If agentDiffServGenStatusAdminMode is
disable(2) then agentDiffServServiceIfOperStatus should
be down(2). If agentDiffServServiceGenStatusAdminMode
is changed to enable(1) then agentDiffServServiceIfOperStatus
should change to up(1) if the service interface is ready
to send and receive DiffServ traffic; it should remain
in the down(2) state if the underlying interface hardware
is not in a link up condition, if the policy definition
represented by agentDiffServServicePolicyIndex is incompatible
with the interface (e.g., requires more bandwidth than the
current capacity of the interface), or if the policy definition
is considered to be incomplete (e.g., one or more composite
rows is not in the active(1) state)."
::= { agentDiffServServiceEntry 4 }
agentDiffServServiceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Storage-type for this conceptual row"
DEFVAL { nonVolatile }
::= { agentDiffServServiceEntry 5 }
agentDiffServServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { agentDiffServServiceEntry 6 }
--*********************** agentDiffServServicePerfTable ************************
agentDiffServServicePerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDiffServServicePerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of service performance entries."
::= { agentDiffServServiceGroup 2 }
agentDiffServServicePerfEntry OBJECT-TYPE
SYNTAX AgentDiffServServicePerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents a service performance entry."
AUGMENTS { agentDiffServServiceEntry }
::= { agentDiffServServicePerfTable 1 }
AgentDiffServServicePerfEntry ::= SEQUENCE {
agentDiffServServicePerfOfferedOctets
Counter32,
agentDiffServServicePerfOfferedPackets
Counter32,
agentDiffServServicePerfDiscardedOctets
Counter32,
agentDiffServServicePerfDiscardedPackets
Counter32,
agentDiffServServicePerfSentOctets
Counter32,
agentDiffServServicePerfSentPackets
Counter32,
agentDiffServServicePerfHCOfferedOctets
Counter64,
agentDiffServServicePerfHCOfferedPackets
Counter64,
agentDiffServServicePerfHCDiscardedOctets
Counter64,
agentDiffServServicePerfHCDiscardedPackets
Counter64,
agentDiffServServicePerfHCSentOctets
Counter64,
agentDiffServServicePerfHCSentPackets
Counter64
}
agentDiffServServicePerfOfferedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered octets count for the specified service interface and direction"
::= { agentDiffServServicePerfEntry 1 }
agentDiffServServicePerfOfferedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered packets count for specified service interface and direction"
::= { agentDiffServServicePerfEntry 2 }
agentDiffServServicePerfDiscardedOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded octets count for the specified service interface and direction"
::= { agentDiffServServicePerfEntry 3 }
agentDiffServServicePerfDiscardedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded packets count for the specified service interface and direction"
::= { agentDiffServServicePerfEntry 4 }
agentDiffServServicePerfSentOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent octets count for the specified service interface and direction"
::= { agentDiffServServicePerfEntry 5 }
agentDiffServServicePerfSentPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent packets count for the specified service interface and direction"
::= { agentDiffServServicePerfEntry 6 }
agentDiffServServicePerfHCOfferedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered octets high capacity count for the specified service interface
and direction"
::= { agentDiffServServicePerfEntry 7 }
agentDiffServServicePerfHCOfferedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offered packets high capacity count for the specified service interface
and direction"
::= { agentDiffServServicePerfEntry 8 }
agentDiffServServicePerfHCDiscardedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded octets high capacity count for the specified service interface
and direction"
::= { agentDiffServServicePerfEntry 9 }
agentDiffServServicePerfHCDiscardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded packets high capacity count for the specified service interface
and direction"
::= { agentDiffServServicePerfEntry 10 }
agentDiffServServicePerfHCSentOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent octets high capacity count for the specified service interface and
direction"
::= { agentDiffServServicePerfEntry 11 }
agentDiffServServicePerfHCSentPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sent packets high capacity count for the specified service interface and
direction"
::= { agentDiffServServicePerfEntry 12 }
END