1395 lines
53 KiB
Plaintext
1395 lines
53 KiB
Plaintext
NETGEAR-ROUTING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- NETGEAR Routing MIB
|
|
-- Copyright 2001-2003 LVL7 Systems, Inc. All rights reserved.
|
|
|
|
-- This SNMP Management Information Specification
|
|
-- embodies LVL7 System's confidential and proprietary
|
|
-- intellectual property. LVL7 Systems retains all title
|
|
-- and ownership in the Specification including any revisions.
|
|
|
|
-- This Specification is supplied "AS IS", LVL7 Systems
|
|
-- makes no warranty, either expressed or implied,
|
|
-- as to the use, operation, condition, or performance of the
|
|
-- Specification.
|
|
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
|
|
Unsigned32, TimeTicks, Integer32, Gauge32
|
|
FROM SNMPv2-SMI
|
|
RowStatus, TruthValue FROM SNMPv2-TC
|
|
ng7000Switch FROM NETGEAR-REF-MIB
|
|
DisplayString,PhysAddress FROM RFC1213-MIB
|
|
ospfIfEntry, ospfVirtIfEntry,
|
|
ospfAreaEntry FROM OSPF-MIB
|
|
rip2IfConfEntry FROM RIPv2-MIB;
|
|
|
|
agentRouting MODULE-IDENTITY
|
|
LAST-UPDATED "200502231200Z" -- 23 Feb 2005 12:00:00 GMT
|
|
ORGANIZATION "Netgear"
|
|
CONTACT-INFO
|
|
""
|
|
|
|
DESCRIPTION
|
|
"The NETGEAR Private MIB for Routing"
|
|
-- revision history
|
|
REVISION
|
|
"200502231200Z" -- 23 Feb 2005 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Initial revision."
|
|
::= { ng7000Switch 2 }
|
|
|
|
--**************************************************************************************
|
|
-- agentSwitchArpGroup
|
|
--
|
|
|
|
--**************************************************************************************
|
|
agentSwitchArpGroup OBJECT IDENTIFIER ::= { agentRouting 1 }
|
|
|
|
agentSwitchArpAgeoutTime OBJECT-TYPE
|
|
SYNTAX Integer32 (15..21600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the ARP entry ageout time in seconds.
|
|
Allowable range: 15-21600"
|
|
DEFVAL { 1200 }
|
|
|
|
::= { agentSwitchArpGroup 1 }
|
|
|
|
agentSwitchArpResponseTime OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the ARP request response timeout in seconds.
|
|
Allowable range: 1-10"
|
|
::= { agentSwitchArpGroup 2 }
|
|
|
|
agentSwitchArpMaxRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the ARP count of maximum request for retries.
|
|
Allowable range: 0-10"
|
|
::= { agentSwitchArpGroup 3 }
|
|
|
|
agentSwitchArpCacheSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the ARP maximum number of entries in the cache.
|
|
Allowable range is platform-specific."
|
|
::= { agentSwitchArpGroup 4 }
|
|
|
|
agentSwitchArpDynamicRenew OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the current setting of ARP dynamic renew mode. "
|
|
DEFVAL { disable }
|
|
::= { agentSwitchArpGroup 5 }
|
|
|
|
agentSwitchArpTotalEntryCountCurrent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of entries in the ARP cache."
|
|
::= { agentSwitchArpGroup 6 }
|
|
|
|
agentSwitchArpTotalEntryCountPeak OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peak number of entries recorded in the ARP cache over
|
|
time. This value is restarted whenever the ARP cache
|
|
size is changed."
|
|
::= { agentSwitchArpGroup 7 }
|
|
|
|
agentSwitchArpStaticEntryCountCurrent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of configured static ARP entries."
|
|
::= { agentSwitchArpGroup 8 }
|
|
|
|
agentSwitchArpStaticEntryCountMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of configurable static ARP entries."
|
|
::= { agentSwitchArpGroup 9 }
|
|
|
|
--**************************************************************************************
|
|
|
|
agentSwitchArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSwitchArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table augments the MIB-II ipNetToMediaTable by providing
|
|
per-interface ARP entry information."
|
|
::= { agentSwitchArpGroup 10 }
|
|
|
|
agentSwitchArpEntry OBJECT-TYPE
|
|
SYNTAX AgentSwitchArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { agentSwitchArpIpAddress }
|
|
::= { agentSwitchArpTable 1 }
|
|
|
|
AgentSwitchArpEntry ::= SEQUENCE {
|
|
agentSwitchArpAge
|
|
TimeTicks,
|
|
agentSwitchArpIpAddress
|
|
IpAddress,
|
|
agentSwitchArpMacAddress
|
|
PhysAddress,
|
|
agentSwitchArpInterface
|
|
Integer32,
|
|
agentSwitchArpType
|
|
INTEGER,
|
|
agentSwitchArpStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentSwitchArpAge OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This defines the time (in seconds) since the ARP entry
|
|
was last refreshed. This value is 0 for ARP entries of
|
|
type local(1) or static(3), since these entries are
|
|
not subject to aging."
|
|
::= { agentSwitchArpEntry 1 }
|
|
|
|
agentSwitchArpIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address assigned to each interface."
|
|
::= { agentSwitchArpEntry 2 }
|
|
|
|
agentSwitchArpMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hardware MAX Address that each interface maps to."
|
|
::= { agentSwitchArpEntry 3 }
|
|
|
|
agentSwitchArpInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Associated IfIndex which identified the ARP Entry."
|
|
::= { agentSwitchArpEntry 4 }
|
|
|
|
agentSwitchArpType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
gateway(2),
|
|
static(3),
|
|
dynamic(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of ARP entry."
|
|
::= { agentSwitchArpEntry 5 }
|
|
|
|
agentSwitchArpStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this ARP entry. Setting this object destroy will remove the entry."
|
|
::= { agentSwitchArpEntry 6 }
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentSwitchIpGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentSwitchIpGroup OBJECT IDENTIFIER ::= { agentRouting 2 }
|
|
|
|
agentSwitchIpRoutingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively enables/disables routing on the switch."
|
|
::= { agentSwitchIpGroup 1 }
|
|
|
|
--**************************************************************************************
|
|
-- agentSwitchIpInterfaceTable
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentSwitchIpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSwitchIpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { agentSwitchIpGroup 3 }
|
|
|
|
agentSwitchIpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX AgentSwitchIpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { agentSwitchIpInterfaceIfIndex }
|
|
::= { agentSwitchIpInterfaceTable 1 }
|
|
|
|
AgentSwitchIpInterfaceEntry ::= SEQUENCE {
|
|
agentSwitchIpInterfaceIfIndex
|
|
Integer32,
|
|
agentSwitchIpInterfaceIpAddress
|
|
IpAddress,
|
|
agentSwitchIpInterfaceNetMask
|
|
IpAddress,
|
|
agentSwitchIpInterfaceClearIp
|
|
INTEGER,
|
|
agentSwitchIpInterfaceRoutingMode
|
|
INTEGER,
|
|
agentSwitchIpInterfaceProxyARPMode
|
|
INTEGER,
|
|
agentSwitchIpInterfaceMtuValue
|
|
Unsigned32
|
|
}
|
|
|
|
agentSwitchIpInterfaceIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex associated with this instance."
|
|
::= { agentSwitchIpInterfaceEntry 1 }
|
|
|
|
agentSwitchIpInterfaceIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IpAddress assigned to this interface. When setting this value,
|
|
the value of agentSwitchIpInterfaceNetMask must be set at the same time."
|
|
::= { agentSwitchIpInterfaceEntry 2 }
|
|
|
|
agentSwitchIpInterfaceNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NetMask assigned to this interface. When setting this value, the
|
|
value of agentSwitchIpInterfaceIpAddress must be set at the same time."
|
|
::= { agentSwitchIpInterfaceEntry 3 }
|
|
|
|
agentSwitchIpInterfaceClearIp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the interfaces IpAddress and NetMask back to 0.0.0.0"
|
|
::= { agentSwitchIpInterfaceEntry 4 }
|
|
|
|
agentSwitchIpInterfaceRoutingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables routing for this interface."
|
|
::= { agentSwitchIpInterfaceEntry 5 }
|
|
|
|
agentSwitchIpInterfaceProxyARPMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables Proxy ARP for this interface."
|
|
::= { agentSwitchIpInterfaceEntry 6 }
|
|
|
|
agentSwitchIpInterfaceMtuValue OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|128..1500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the MTU value for this interface. If the value returned is 0
|
|
this interface is not enabled for routing. It is not valid to set this
|
|
value to 0 if routing is enabled."
|
|
::= { agentSwitchIpInterfaceEntry 7 }
|
|
|
|
--**************************************************************************************
|
|
-- agentSwitchIpRouterDiscoveryTable
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentSwitchIpRouterDiscoveryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSwitchIpRouterDiscoveryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is no global administrative flag for router discovery. The global
|
|
routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing
|
|
is disabled, router discovery is disabled as well."
|
|
::= { agentSwitchIpGroup 4 }
|
|
|
|
agentSwitchIpRouterDiscoveryEntry OBJECT-TYPE
|
|
SYNTAX AgentSwitchIpRouterDiscoveryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { agentSwitchIpRouterDiscoveryIfIndex }
|
|
::= { agentSwitchIpRouterDiscoveryTable 1 }
|
|
|
|
AgentSwitchIpRouterDiscoveryEntry ::= SEQUENCE {
|
|
agentSwitchIpRouterDiscoveryIfIndex
|
|
Integer32,
|
|
agentSwitchIpRouterDiscoveryAdvertiseMode
|
|
INTEGER,
|
|
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval
|
|
Integer32,
|
|
agentSwitchIpRouterDiscoveryMinAdvertisementInterval
|
|
Integer32,
|
|
agentSwitchIpRouterDiscoveryAdvertisementLifetime
|
|
Integer32,
|
|
agentSwitchIpRouterDiscoveryPreferenceLevel
|
|
Integer32,
|
|
agentSwitchIpRouterDiscoveryAdvertisementAddress
|
|
IpAddress
|
|
}
|
|
|
|
agentSwitchIpRouterDiscoveryIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface Number to configure Router Discovery on."
|
|
::= { agentSwitchIpRouterDiscoveryEntry 1 }
|
|
|
|
agentSwitchIpRouterDiscoveryAdvertiseMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable router discovery on the interface."
|
|
DEFVAL { enable }
|
|
::= { agentSwitchIpRouterDiscoveryEntry 2 }
|
|
|
|
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (4..1800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum time allowed between sending router advertisements
|
|
from the interface."
|
|
DEFVAL { 600 }
|
|
::= { agentSwitchIpRouterDiscoveryEntry 3 }
|
|
|
|
agentSwitchIpRouterDiscoveryMinAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (3..1800)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum time allowed between sending router advertisements from the interface.
|
|
|
|
This value must be less than or equal to
|
|
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval."
|
|
DEFVAL { 450 }
|
|
::= { agentSwitchIpRouterDiscoveryEntry 4 }
|
|
|
|
agentSwitchIpRouterDiscoveryAdvertisementLifetime OBJECT-TYPE
|
|
SYNTAX Integer32 (4..9000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of lifetime field of router advertsisement sent from
|
|
the interface.
|
|
|
|
This value must be greater than or equal to
|
|
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval."
|
|
DEFVAL { 1800 }
|
|
::= { agentSwitchIpRouterDiscoveryEntry 5 }
|
|
|
|
agentSwitchIpRouterDiscoveryPreferenceLevel OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preferability of the address as a default router address,
|
|
related to other addresses on the same subnet. This is defined
|
|
as the larger the number, the higher the preference."
|
|
DEFVAL { 0 }
|
|
::= { agentSwitchIpRouterDiscoveryEntry 6 }
|
|
|
|
agentSwitchIpRouterDiscoveryAdvertisementAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address used when sending router advertisements from the interface."
|
|
DEFVAL { 'E0000001'H } -- 224.0.0.1
|
|
::= { agentSwitchIpRouterDiscoveryEntry 7 }
|
|
|
|
--**************************************************************************************
|
|
-- agentSwitchIpVlanTable
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentSwitchIpVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSwitchIpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { agentSwitchIpGroup 5 }
|
|
|
|
agentSwitchIpVlanEntry OBJECT-TYPE
|
|
SYNTAX AgentSwitchIpVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Static VLAN for which routing can be enabled/disabled"
|
|
INDEX { agentSwitchIpVlanId }
|
|
::= { agentSwitchIpVlanTable 1 }
|
|
|
|
AgentSwitchIpVlanEntry ::= SEQUENCE {
|
|
agentSwitchIpVlanId
|
|
Integer32,
|
|
agentSwitchIpVlanIfIndex
|
|
Integer32,
|
|
agentSwitchIpVlanRoutingStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentSwitchIpVlanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Vlan's Id."
|
|
::= { agentSwitchIpVlanEntry 1 }
|
|
|
|
agentSwitchIpVlanIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IfIndex associated with this VLAN."
|
|
::= { agentSwitchIpVlanEntry 2 }
|
|
|
|
agentSwitchIpVlanRoutingStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of Routing mode per Vlan.
|
|
active(1) - Vlan is enabled for routing
|
|
createAndGo(4) - Adds Vlan entry for routing
|
|
destroy(6) - Removes Vlan from routing"
|
|
::= { agentSwitchIpVlanEntry 3 }
|
|
|
|
--**************************************************************************************
|
|
-- agentSwitchSecondaryAddressTable
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentSwitchSecondaryAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentSwitchSecondaryAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains a list of secondary IP Addresses associated with an interface."
|
|
::= { agentSwitchIpGroup 6 }
|
|
|
|
agentSwitchSecondaryAddressEntry OBJECT-TYPE
|
|
SYNTAX AgentSwitchSecondaryAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A secondary IP Address for a given interface. This IP Address must not
|
|
conflict with the IP Address configured in the agentSwitchIpInterfaceTable."
|
|
INDEX { agentSwitchIpInterfaceIfIndex, agentSwitchSecondaryIpAddress }
|
|
::= { agentSwitchSecondaryAddressTable 1 }
|
|
|
|
AgentSwitchSecondaryAddressEntry ::= SEQUENCE {
|
|
agentSwitchSecondaryIpAddress
|
|
IpAddress,
|
|
agentSwitchSecondaryNetMask
|
|
IpAddress,
|
|
agentSwitchSecondaryStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentSwitchSecondaryIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Secondary IP Address assigned to this interface."
|
|
::= { agentSwitchSecondaryAddressEntry 1 }
|
|
|
|
agentSwitchSecondaryNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Secondary Net Mask assigned to this interface. This value must be
|
|
set during creation, and can not be changed."
|
|
::= { agentSwitchSecondaryAddressEntry 2 }
|
|
|
|
agentSwitchSecondaryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Creates a new entry in the Secondary Address table.
|
|
Allowed values are:
|
|
|
|
createAndGo(4) - Creates an entry in this table, associating the address
|
|
with a given interface. The agentSwitchSecondaryNetMask
|
|
object must be set during creation.
|
|
|
|
destroy(6) - Removes the associated address from the interface."
|
|
::= { agentSwitchSecondaryAddressEntry 3 }
|
|
|
|
--**************************************************************************************
|
|
-- agentRouterRipConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentRouterRipConfigGroup OBJECT IDENTIFIER ::= { agentRouting 3 }
|
|
|
|
agentRouterRipAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the administrative mode of RIP in the router."
|
|
::= { agentRouterRipConfigGroup 1 }
|
|
|
|
agentRouterRipSplitHorizonMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
simple(2),
|
|
poisonReverse(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the RIP split horizon operating mode in the router.
|
|
A value of none(1) means split horizon processing is
|
|
disabled. When set to simple(2), the simple split
|
|
horizon technique is used. When set to poisonReverse(3),
|
|
the split horizon with poison reverse technique is used.
|
|
The default split horizon mode is simple(2)."
|
|
DEFVAL { simple }
|
|
::= { agentRouterRipConfigGroup 2 }
|
|
|
|
agentRouterRipAutoSummaryMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the RIP auto summarization mode in the router.
|
|
A value of enable(1) means that routes advertized by
|
|
this RIP router are combined, or summarized, whenever
|
|
possible into aggregates. When set to disable(2),
|
|
routes are not aggregated in RIP updates generated
|
|
by this router. The default auto summary mode is
|
|
enable(1)."
|
|
DEFVAL { enable }
|
|
::= { agentRouterRipConfigGroup 3 }
|
|
|
|
agentRouterRipHostRoutesAcceptMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sets the RIP host route acceptance mode in the router.
|
|
A value of enable(1) means that host routes advertized
|
|
to this RIP router will be accepted (learned) into its
|
|
routing table. When set to disable(2), host routes
|
|
advertized in RIP updates from neighboring routers
|
|
are ignored. The default host routes accept mode is
|
|
enable(1)."
|
|
DEFVAL { enable }
|
|
::= { agentRouterRipConfigGroup 4 }
|
|
|
|
|
|
--************************************************************************************
|
|
agentRouterRipDefaultMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default metric of redistributed routes, when RIP redistributes
|
|
from other protocols."
|
|
::= { agentRouterRipConfigGroup 5 }
|
|
|
|
agentRouterRipDefaultMetricConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine whether RIP default-metric is configured or not."
|
|
::= { agentRouterRipConfigGroup 6 }
|
|
|
|
agentRouterRipDefaultInfoOriginate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine, whether RIP can advertise a default-route learned
|
|
from another protocol."
|
|
DEFVAL { false }
|
|
::= { agentRouterRipConfigGroup 7 }
|
|
|
|
-- Agent RIP Route-redistribution table. This table contains, one entry per
|
|
-- source(bgp, ospf, static, connected) from which BGP redistributes routes.
|
|
|
|
agentRipRouteRedistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentRipRouteRedistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the MIB objects required to configure
|
|
route-redistribution for RIP. Here, RIP is the Destination
|
|
protocol and the source protocols can be any of : BGP, OSPF,
|
|
Static, Connected."
|
|
::= { agentRouterRipConfigGroup 8 }
|
|
|
|
agentRipRouteRedistEntry OBJECT-TYPE
|
|
SYNTAX AgentRipRouteRedistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { agentRipRouteRedistSource }
|
|
::= { agentRipRouteRedistTable 1 }
|
|
|
|
AgentRipRouteRedistEntry ::= SEQUENCE {
|
|
agentRipRouteRedistSource
|
|
INTEGER,
|
|
agentRipRouteRedistMode
|
|
INTEGER,
|
|
agentRipRouteRedistMetric
|
|
Integer32,
|
|
agentRipRouteRedistMetricConfigured
|
|
TruthValue,
|
|
agentRipRouteRedistMatchInternal
|
|
INTEGER,
|
|
agentRipRouteRedistMatchExternal1
|
|
INTEGER,
|
|
agentRipRouteRedistMatchExternal2
|
|
INTEGER,
|
|
agentRipRouteRedistMatchNSSAExternal1
|
|
INTEGER,
|
|
agentRipRouteRedistMatchNSSAExternal2
|
|
INTEGER,
|
|
agentRipRouteRedistDistList
|
|
Unsigned32,
|
|
agentRipRouteRedistDistListConfigured
|
|
TruthValue
|
|
}
|
|
|
|
agentRipRouteRedistSource OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
connected(1),
|
|
static(2),
|
|
ospf(3),
|
|
bgp(4)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source route, from which RIP can redistribute routes.
|
|
This object also acts as the identifier for the
|
|
RIP redistribution Table entry."
|
|
::= { agentRipRouteRedistEntry 1 }
|
|
|
|
agentRipRouteRedistMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User enabels/disables route-redistribution for a particular source
|
|
protocol."
|
|
DEFVAL { disable }
|
|
::= { agentRipRouteRedistEntry 2 }
|
|
|
|
agentRipRouteRedistMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric used for redistributing a particular source protocol route
|
|
into RIP."
|
|
::= { agentRipRouteRedistEntry 3 }
|
|
|
|
agentRipRouteRedistMetricConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine whether RIP redistribute-metric is configured or not."
|
|
::= { agentRipRouteRedistEntry 4 }
|
|
|
|
|
|
agentRipRouteRedistMatchInternal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2),
|
|
not-applicable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this flag is true, RIP redistributes OSPF internal routes.
|
|
It will be non-applicable, when source protocol is other than ospf."
|
|
::= { agentRipRouteRedistEntry 5 }
|
|
|
|
agentRipRouteRedistMatchExternal1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2),
|
|
not-applicable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this flag is true, RIP redistributes OSPF External1 routes.
|
|
It will be non-applicable, when source protocol is other than ospf."
|
|
::= { agentRipRouteRedistEntry 6 }
|
|
|
|
agentRipRouteRedistMatchExternal2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2),
|
|
not-applicable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this flag is true, RIP redistributes OSPF External2 routes.
|
|
It will be non-applicable, when source protocol is other than ospf."
|
|
::= { agentRipRouteRedistEntry 7 }
|
|
|
|
agentRipRouteRedistMatchNSSAExternal1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2),
|
|
not-applicable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this flag is true, RIP redistributes OSPF NSSA-External1 routes.
|
|
It will be non-applicable, when source protocol is other than ospf."
|
|
::= { agentRipRouteRedistEntry 8 }
|
|
|
|
agentRipRouteRedistMatchNSSAExternal2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2),
|
|
not-applicable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this flag is true, RIP redistributes OSPF NSSA-External2 routes.
|
|
It will be non-applicable, when source protocol is other than ospf."
|
|
::= { agentRipRouteRedistEntry 9 }
|
|
|
|
agentRipRouteRedistDistList OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..199)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access-list number of the access-list, which filters routes received
|
|
from a source-protocol."
|
|
::= { agentRipRouteRedistEntry 10 }
|
|
|
|
agentRipRouteRedistDistListConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine whether Access-list is configured or not."
|
|
::= { agentRipRouteRedistEntry 11 }
|
|
|
|
|
|
|
|
|
|
-- The RIP Interface Configuration Table (augmented information).
|
|
|
|
agentRip2IfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentRip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of subnets which require separate
|
|
configuration in RIP. Augments rip2IfConfTable
|
|
in the RIPv2-MIB."
|
|
::= { agentRouterRipConfigGroup 9 }
|
|
|
|
agentRip2IfConfEntry OBJECT-TYPE
|
|
SYNTAX AgentRip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Single Routing Domain in a single Subnet.
|
|
Augments rip2IfConfEntry in RIPv2-MIB."
|
|
AUGMENTS { rip2IfConfEntry }
|
|
::= { agentRip2IfConfTable 1 }
|
|
|
|
AgentRip2IfConfEntry ::=
|
|
SEQUENCE {
|
|
agentRip2IfConfAuthKeyId
|
|
INTEGER
|
|
}
|
|
|
|
agentRip2IfConfAuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier for the authentication key used
|
|
on this interface. This field is only meaningful
|
|
when the RIPv2-MIB rip2IfConfAuthType is md5(3);
|
|
otherwise, the value is not used."
|
|
::= { agentRip2IfConfEntry 1 }
|
|
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentRouterOspfConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentRouterOspfConfigGroup OBJECT IDENTIFIER ::= { agentRouting 4 }
|
|
|
|
--***********************************************************************
|
|
agentOspfDefaultMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default metric of redistributed routes, when OSPF redistributes
|
|
from other protocols."
|
|
::= { agentRouterOspfConfigGroup 1 }
|
|
|
|
agentOspfDefaultMetricConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine whether OSPF default-metric is configured or not."
|
|
::= { agentRouterOspfConfigGroup 2 }
|
|
|
|
|
|
agentOspfDefaultInfoOriginate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine, whether OSPF can advertise a default-route learned
|
|
from another protocol."
|
|
DEFVAL { false }
|
|
::= { agentRouterOspfConfigGroup 3 }
|
|
|
|
agentOspfDefaultInfoOriginateAlways OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always.
|
|
Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the
|
|
router's forwarding table contains a default route."
|
|
DEFVAL { false }
|
|
::= { agentRouterOspfConfigGroup 4 }
|
|
|
|
agentOspfDefaultInfoOriginateMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric of the default route,which OSPF advertises when learned from
|
|
other protocol."
|
|
DEFVAL { 10 }
|
|
::= { agentRouterOspfConfigGroup 5 }
|
|
|
|
agentOspfDefaultInfoOriginateMetricConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine whether OSPF default-info originate metric
|
|
is configured or not."
|
|
::= { agentRouterOspfConfigGroup 6 }
|
|
|
|
agentOspfDefaultInfoOriginateMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
externalType1(1),
|
|
externalType2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric Type of the default route,which OSPF advertises when learned from
|
|
other protocol. It can be 1(external type 1) or 2(external type 2)."
|
|
DEFVAL { 2 }
|
|
::= { agentRouterOspfConfigGroup 7 }
|
|
|
|
-- Agent OSPF Route-redistribution table. This table contains, one entry per
|
|
-- source(bgp, rip, static, connected) from which OSPF redistributes routes.
|
|
|
|
agentOspfRouteRedistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentOspfRouteRedistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the MIB objects required to configure
|
|
route-redistribution for OSPF. Here, OSPF is the Destination
|
|
protocol and the source protocols can be any of : BGP, RIP,
|
|
Static, Connected."
|
|
::= { agentRouterOspfConfigGroup 8 }
|
|
|
|
agentOspfRouteRedistEntry OBJECT-TYPE
|
|
SYNTAX AgentOspfRouteRedistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { agentOspfRouteRedistSource }
|
|
::= { agentOspfRouteRedistTable 1 }
|
|
|
|
AgentOspfRouteRedistEntry ::= SEQUENCE {
|
|
|
|
agentOspfRouteRedistSource
|
|
INTEGER,
|
|
agentOspfRouteRedistMode
|
|
INTEGER,
|
|
agentOspfRouteRedistMetric
|
|
Integer32,
|
|
agentOspfRouteRedistMetricConfigured
|
|
TruthValue,
|
|
agentOspfRouteRedistMetricType
|
|
INTEGER,
|
|
agentOspfRouteRedistTag
|
|
Unsigned32,
|
|
agentOspfRouteRedistSubnets
|
|
TruthValue,
|
|
agentOspfRouteRedistDistList
|
|
Unsigned32,
|
|
agentOspfRouteRedistDistListConfigured
|
|
TruthValue
|
|
}
|
|
|
|
agentOspfRouteRedistSource OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
connected(1),
|
|
static(2),
|
|
rip(3),
|
|
bgp(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source protocol, from which OSPF can redistribute routes.
|
|
This object also acts as the identifier for the
|
|
OSPF redistribution Table entry."
|
|
::= { agentOspfRouteRedistEntry 1 }
|
|
|
|
agentOspfRouteRedistMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User enabels/disables route-redistribution for a particular source
|
|
protocol."
|
|
DEFVAL { disable }
|
|
::= { agentOspfRouteRedistEntry 2 }
|
|
|
|
agentOspfRouteRedistMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16777215)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric used for redistributing a particular source protocol route
|
|
into OSPF."
|
|
::= { agentOspfRouteRedistEntry 3 }
|
|
|
|
agentOspfRouteRedistMetricConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine whether OSPF redistribute-metric is configured or not."
|
|
::= { agentOspfRouteRedistEntry 4 }
|
|
|
|
|
|
agentOspfRouteRedistMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
externalType1(1),
|
|
externalType2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric Type of routes,which OSPF redistributes from other source protocols.
|
|
It can be 1(external type 1) or 2(external type 2)."
|
|
DEFVAL { externalType2 }
|
|
::= { agentOspfRouteRedistEntry 5 }
|
|
|
|
agentOspfRouteRedistTag OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It specifies the tag field in routes redistributed by OSPF."
|
|
::= { agentOspfRouteRedistEntry 6 }
|
|
|
|
agentOspfRouteRedistSubnets OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this value is false, then OSPF will not redistribute subnetted routes."
|
|
DEFVAL { false }
|
|
::= { agentOspfRouteRedistEntry 7 }
|
|
|
|
agentOspfRouteRedistDistList OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..199)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access-list number of the access-list, which filters routes received
|
|
from a source-protocol."
|
|
::= { agentOspfRouteRedistEntry 8 }
|
|
|
|
agentOspfRouteRedistDistListConfigured OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flag to determine whether Access-list is configured or not."
|
|
::= { agentOspfRouteRedistEntry 9 }
|
|
|
|
|
|
-- OSPF Interface Table (augmented information)
|
|
|
|
agentOspfIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the inter-
|
|
faces from the viewpoint of OSPF. Augments
|
|
ospfIfTable from the OSPF-MIB."
|
|
::= { agentRouterOspfConfigGroup 9 }
|
|
|
|
agentOspfIfEntry OBJECT-TYPE
|
|
SYNTAX AgentOspfIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Entry describes one inter-
|
|
face from the viewpoint of OSPF. Augments
|
|
ospfIfEntry in OSPF-MIB."
|
|
AUGMENTS { ospfIfEntry }
|
|
::= { agentOspfIfTable 1 }
|
|
|
|
AgentOspfIfEntry ::=
|
|
SEQUENCE {
|
|
agentOspfIfAuthKeyId
|
|
INTEGER,
|
|
agentOspfIfIpMtuIgnoreFlag
|
|
INTEGER
|
|
}
|
|
|
|
agentOspfIfAuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier for the authentication key used
|
|
on this interface. This field is only meaningful
|
|
when the OSPF-MIB ospfIfAuthType is md5(2);
|
|
otherwise, the value is not used."
|
|
::= { agentOspfIfEntry 1 }
|
|
|
|
agentOspfIfIpMtuIgnoreFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the IP MTU Ignore Flag value for this OSPF interface."
|
|
::= { agentOspfIfEntry 2 }
|
|
|
|
-- OSPF Virtual Interface Table (augmented information)
|
|
|
|
agentOspfVirtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about this router's virtual inter-
|
|
faces. Augments ospfVirtIfTable from the OSPF-MIB."
|
|
::= { agentRouterOspfConfigGroup 10 }
|
|
|
|
agentOspfVirtIfEntry OBJECT-TYPE
|
|
SYNTAX AgentOspfVirtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a single Virtual Interface.
|
|
Augments ospfVirtIfEntry in OSPF-MIB."
|
|
AUGMENTS { ospfVirtIfEntry }
|
|
::= { agentOspfVirtIfTable 1 }
|
|
|
|
AgentOspfVirtIfEntry ::=
|
|
SEQUENCE {
|
|
agentOspfVirtIfAuthKeyId
|
|
INTEGER
|
|
}
|
|
|
|
agentOspfVirtIfAuthKeyId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier for the authentication key used
|
|
on this virtual interface. This field is only meaningful
|
|
when the OSPF-MIB ospfVirtIfAuthType is md5(2);
|
|
otherwise, the value is not used."
|
|
::= { agentOspfVirtIfEntry 1 }
|
|
|
|
|
|
--**************************************************************************************
|
|
|
|
agentRouterOspfRFC1583CompatibilityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"From RFC2328:
|
|
Controls the preference rules used in Section 16.4 when
|
|
choosing among multiple AS-external-LSAs advertising the
|
|
same destination. When set to 'enabled', the preference
|
|
rules remain those specified by RFC 1583 ([Ref9]). When set
|
|
to 'disabled', the preference rules are those stated in
|
|
|
|
Section 16.4.1, which prevent routing loops when AS-
|
|
external-LSAs for the same destination have been originated
|
|
from different areas. Set to 'enabled' by default.
|
|
|
|
In order to minimize the chance of routing loops, all OSPF
|
|
routers in an OSPF routing domain should have
|
|
RFC1583Compatibility set identically. When there are routers
|
|
present that have not been updated with the functionality
|
|
specified in Section 16.4.1 of this memo, all routers should
|
|
have RFC1583Compatibility set to 'enabled'. Otherwise, all
|
|
routers should have RFC1583Compatibility set to 'disabled',
|
|
preventing all routing loops."
|
|
DEFVAL { enable }
|
|
::= { agentRouterOspfConfigGroup 11 }
|
|
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentSnmpTrapFlagsConfigGroupLayer3
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentSnmpTrapFlagsConfigGroupLayer3 OBJECT IDENTIFIER ::= { agentRouting 5 }
|
|
|
|
agentSnmpVRRPNewMasterTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag enables the sending of VRRP new master notification
|
|
traps."
|
|
::= { agentSnmpTrapFlagsConfigGroupLayer3 1 }
|
|
|
|
agentSnmpVRRPAuthFailureTrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag enables the sending of VRRP authentication failure
|
|
notification traps."
|
|
::= { agentSnmpTrapFlagsConfigGroupLayer3 2 }
|
|
|
|
--**************************************************************************************
|
|
-- agentBootpDhcpRelayGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentBootpDhcpRelayGroup OBJECT IDENTIFIER ::= { agentRouting 6 }
|
|
|
|
agentBootpDhcpRelayMaxHopCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BOOTP/DHCP Max Hop Count.
|
|
The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16
|
|
assuming that the request is looped through the intermediate agents. The default value is 4."
|
|
DEFVAL { 4 }
|
|
::= { agentBootpDhcpRelayGroup 1 }
|
|
|
|
agentBootpDhcpRelayForwardingIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BOOTP/DHCP Server IP Address.
|
|
All the requests will be forwarded and the replies expected from this address."
|
|
::= { agentBootpDhcpRelayGroup 2 }
|
|
|
|
agentBootpDhcpRelayForwardMode OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BOOTP/DHCP Admin Mode.
|
|
The relaying functionality can be administratively enabled or disabled by this object"
|
|
::= { agentBootpDhcpRelayGroup 3 }
|
|
|
|
agentBootpDhcpRelayMinWaitTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BOOTP/DHCP Minimum Wait Time.
|
|
When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'
|
|
(seconds since client began booting) field of the request as a factor in deciding whether to
|
|
relay the request or not."
|
|
::= { agentBootpDhcpRelayGroup 4 }
|
|
|
|
|
|
agentBootpDhcpRelayCircuitIdOptionMode OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BOOTP/DHCP Circuit ID Option Mode.
|
|
This flag is set to enable/disable the network element to add/remove the DHCP Relay agent
|
|
Circuit ID sub-options."
|
|
::= { agentBootpDhcpRelayGroup 5 }
|
|
|
|
agentBootpDhcpRelayNumOfRequestsReceived OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Number of BOOTP/DHCP Requests Received.
|
|
Total number of BOOTREQUESTs received from all clients."
|
|
::= { agentBootpDhcpRelayGroup 6 }
|
|
|
|
|
|
agentBootpDhcpRelayNumOfRequestsForwarded OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Number of BOOTP/DHCP Requests Forwarded.
|
|
Total number of BOOTREQUESTs forwarded to the next agents/servers."
|
|
::= { agentBootpDhcpRelayGroup 7 }
|
|
|
|
|
|
agentBootpDhcpRelayNumOfDiscards OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Number of BOOTP/DHCP Discards.
|
|
Total number of packets discarded by the network element because of error in the packet."
|
|
::= { agentBootpDhcpRelayGroup 8 }
|
|
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentECMPGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentECMPGroup OBJECT IDENTIFIER ::= { agentRouting 7 }
|
|
|
|
agentECMPOspfMaxPaths OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It sets the number of paths that OSPF can report for a given destination
|
|
where maxpaths is platform-dependent."
|
|
DEFVAL { 4 }
|
|
::= { agentECMPGroup 1 }
|
|
|
|
END
|
|
|