mibs-downloader/mibs/FASTPATH-ROUTING6-MIB.mib

812 lines
30 KiB
Plaintext

FASTPATH-ROUTING6-MIB DEFINITIONS ::= BEGIN
-- Broadcom Corporation FastPath Routing MIB
-- Copyright Broadcom Corporation (2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Broadcom Corporation's confidential and proprietary
-- intellectual property. Broadcom Corporation retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Broadcom Corporation
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Unsigned32, Integer32,
Gauge32 FROM SNMPv2-SMI
DisplayString, PhysAddress, TruthValue, TimeStamp,
VariablePointer, RowPointer, RowStatus, MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix,
Ipv6AddressIfIdentifier,
Ipv6IfIndexOrZero FROM IPV6-TC
fastPath FROM BROADCOM-REF-MIB;
fastPathRoutingIpv6 MODULE-IDENTITY
LAST-UPDATED "200705230000Z" -- 23 May 2007 12:00:00 GMT
ORGANIZATION "Broadcom Corporation"
CONTACT-INFO
" Customer Support
Postal: Broadcom Corporation
100, Perimeter Park Drive
Morrisville, NC 27560
Tel: +1 919 865 2700"
DESCRIPTION
"The Broadcom Private MIB for FastPath Ipv6 Routing"
-- Revision history.
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Broadcom branding related changes."
REVISION
"200509211700Z" -- 21 Sept 2005 12:00 PM EST
DESCRIPTION
"Updated for release"
::= { fastPath 30 }
--**************************************************************************************
-- agentIpv6Group
--
--**************************************************************************************
agentIpv6Group OBJECT IDENTIFIER ::= { fastPathRoutingIpv6 1 }
agentIpv6RoutingMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enables/disables ipv6 unicast routing on the switch."
::= { agentIpv6Group 1 }
--**************************************************************************************
-- agentIpv6InterfaceTable
--
--**************************************************************************************
agentIpv6InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { agentIpv6Group 2 }
agentIpv6InterfaceEntry OBJECT-TYPE
SYNTAX AgentIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { agentIpv6InterfaceIfIndex }
::= { agentIpv6InterfaceTable 1 }
AgentIpv6InterfaceEntry ::= SEQUENCE {
agentIpv6InterfaceIfIndex
Integer32,
agentIpv6InterfaceMtuValue
Unsigned32,
agentIpv6InterfaceDadTransmits
Integer32,
agentIpv6InterfaceLinkLocalOnly
INTEGER,
agentIpv6InterfaceIcmpUnreachables
INTEGER
}
agentIpv6InterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex associated with this instance."
::= { agentIpv6InterfaceEntry 1 }
agentIpv6InterfaceMtuValue OBJECT-TYPE
SYNTAX Unsigned32 (0|1280..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the MTU value for this interface.If it is not yet configured,
retrieving the value of this object results in a zero value.
Setting the value zero to this object effectively un-configures the MTU."
::= { agentIpv6InterfaceEntry 2 }
agentIpv6InterfaceDadTransmits OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the dad transmits value for this interface."
::= { agentIpv6InterfaceEntry 3 }
agentIpv6InterfaceLinkLocalOnly OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When enabled, interface is capable of ipv6 operation without a global address.
In this case, an eui-64 based link-local address is used. "
DEFVAL { disable }
::= { agentIpv6InterfaceEntry 4 }
agentIpv6InterfaceIcmpUnreachables OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is enable, it indicates that ICMPv6 unreachables can be sent on this
interface."
::= { agentIpv6InterfaceEntry 5 }
--**************************************************************************************
-- agentIpv6RouterAdvertisementTable
--
--**************************************************************************************
agentIpv6RouterAdvertisementTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6RouterAdvertisementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is no global administrative flag for router advertisement. The global
routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing
is disabled, router advertisement is disabled as well."
::= { agentIpv6Group 3 }
agentIpv6RouterAdvertisementEntry OBJECT-TYPE
SYNTAX AgentIpv6RouterAdvertisementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { agentIpv6RouterAdvertisementIfIndex }
::= { agentIpv6RouterAdvertisementTable 1 }
AgentIpv6RouterAdvertisementEntry ::= SEQUENCE {
agentIpv6RouterAdvertisementIfIndex
Integer32,
agentIpv6RouterAdvertisementSuppressMode
INTEGER,
agentIpv6RouterAdvertisementMaxAdvertisementInterval
Integer32,
agentIpv6RouterAdvertisementAdvertisementLifetime
Integer32,
agentIpv6RouterAdvertisementNbrSolicitInterval
Integer32,
agentIpv6RouterAdvertisementReachableTime
Integer32,
agentIpv6RouterAdvertisementManagedFlag
INTEGER,
agentIpv6RouterAdvertisementOtherFlag
INTEGER
}
agentIpv6RouterAdvertisementIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Number to configure Router Advertisement on."
::= { agentIpv6RouterAdvertisementEntry 1 }
agentIpv6RouterAdvertisementSuppressMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable router advertisement suppression on the interface."
DEFVAL { disable }
::= { agentIpv6RouterAdvertisementEntry 2 }
agentIpv6RouterAdvertisementMaxAdvertisementInterval OBJECT-TYPE
SYNTAX Integer32 (4..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum time allowed between sending router advertisements
from the interface."
DEFVAL { 600 }
::= { agentIpv6RouterAdvertisementEntry 3 }
agentIpv6RouterAdvertisementAdvertisementLifetime OBJECT-TYPE
SYNTAX Integer32 (4..65520)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of lifetime field of router advertisement sent from
the interface.
This value must be greater than or equal to
agentIpv6RouterAdvertisementMaxAdvertisementInterval."
DEFVAL { 1800 }
::= { agentIpv6RouterAdvertisementEntry 4 }
agentIpv6RouterAdvertisementNbrSolicitInterval OBJECT-TYPE
SYNTAX Integer32 (0..3600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of retrans time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval."
DEFVAL { 0 }
::= { agentIpv6RouterAdvertisementEntry 5 }
agentIpv6RouterAdvertisementReachableTime OBJECT-TYPE
SYNTAX Integer32 (0..3600000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of reachable time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval."
DEFVAL { 0 }
::= { agentIpv6RouterAdvertisementEntry 6 }
agentIpv6RouterAdvertisementManagedFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of managed config field of router advertisement sent from
the interface."
DEFVAL { disable }
::= { agentIpv6RouterAdvertisementEntry 7 }
agentIpv6RouterAdvertisementOtherFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of other config field of router advertisement sent from
the interface."
DEFVAL { disable }
::= { agentIpv6RouterAdvertisementEntry 8 }
-- Address Prefix table
-- The IPv6 Address Prefix table contains information on
-- the entity's IPv6 Address Prefixes that are associated
-- with IPv6 interfaces.
agentIpv6AddrPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6AddrPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of IPv6 address prefixes of
IPv6 interfaces."
::= { agentIpv6Group 4 }
agentIpv6AddrPrefixEntry OBJECT-TYPE
SYNTAX AgentIpv6AddrPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An interface entry containing objects of
a particular IPv6 address prefix."
INDEX { agentIpv6InterfaceIfIndex,
agentIpv6AddrPrefix,
agentIpv6AddrPrefixLength }
::= { agentIpv6AddrPrefixTable 1 }
AgentIpv6AddrPrefixEntry ::= SEQUENCE {
agentIpv6AddrPrefix Ipv6AddressPrefix,
agentIpv6AddrPrefixLength INTEGER,
agentIpv6AddrPrefixOnLinkFlag TruthValue,
agentIpv6AddrPrefixAutonomousFlag TruthValue,
agentIpv6AddrPrefixAdvPreferredLifetime Unsigned32,
agentIpv6AddrPrefixAdvValidLifetime Unsigned32
}
agentIpv6AddrPrefix OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix associated with the this interface."
::= { agentIpv6AddrPrefixEntry 1 }
agentIpv6AddrPrefixLength OBJECT-TYPE
SYNTAX INTEGER (0..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits)."
::= { agentIpv6AddrPrefixEntry 2 }
agentIpv6AddrPrefixOnLinkFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if this
prefix can be used for on-link determination
and the value 'false(2)' otherwise."
::= { agentIpv6AddrPrefixEntry 3 }
agentIpv6AddrPrefixAutonomousFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Autonomous address configuration flag. When
true(1), indicates that this prefix can be used
for autonomous address configuration (i.e. can
be used to form a local interface address).
If false(2), it is not used to autoconfigure
a local interface address."
::= { agentIpv6AddrPrefixEntry 4 }
agentIpv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is the length of time in seconds that this
prefix will remain preferred, i.e. time until
deprecation. A value of 4,294,967,295 represents
infinity.
The address generated from a deprecated prefix
should no longer be used as a source address in
new communications, but packets received on such
an interface are processed as expected."
::= { agentIpv6AddrPrefixEntry 5 }
agentIpv6AddrPrefixAdvValidLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It is the length of time in seconds that this
prefix will remain valid, i.e. time until
invalidation. A value of 4,294,967,295 represents
infinity.
The address generated from an invalidated prefix
should not appear as the destination or source
address of a packet."
::= { agentIpv6AddrPrefixEntry 6 }
-- the IPv6 Address table
-- The IPv6 address table contains this node's IPv6
-- addressing information.
agentIpv6AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addressing information relevant to
this node's interface addresses."
::= { agentIpv6Group 5 }
agentIpv6AddrEntry OBJECT-TYPE
SYNTAX AgentIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The addressing information for one of this
node's interface addresses."
INDEX { agentIpv6InterfaceIfIndex, agentIpv6AddrAddress }
::= { agentIpv6AddrTable 1 }
AgentIpv6AddrEntry ::=
SEQUENCE {
agentIpv6AddrAddress Ipv6Address,
agentIpv6AddrPfxLength INTEGER,
agentIpv6AddrEui64Flag TruthValue,
agentIpv6AddrStatus RowStatus
}
agentIpv6AddrAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address to which this entry's addressing
information pertains."
::= { agentIpv6AddrEntry 1 }
agentIpv6AddrPfxLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
UNITS "bits"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the prefix (in bits) associated with
the IPv6 address of this entry."
::= { agentIpv6AddrEntry 2 }
agentIpv6AddrEui64Flag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object has the value 'true(1)', if this
address uses and eui-64 generated interface identifier and the value
'false(2)' otherwise."
::= { agentIpv6AddrEntry 3 }
agentIpv6AddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates a new entry in the Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentIpv6NetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface."
::= { agentIpv6AddrEntry 4 }
-- IPv6 Static Routing table
agentIpv6StaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Static Routing table. This table contains
an entry for each valid IPv6 static unicast route
that can be used for packet forwarding
determination."
::= { agentIpv6Group 6 }
agentIpv6StaticRouteEntry OBJECT-TYPE
SYNTAX AgentIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A routing entry."
INDEX { agentIpv6StaticRouteDest,
agentIpv6StaticRoutePfxLength,
agentIpv6StaticRouteIfIndex,
agentIpv6StaticRouteNextHop }
::= { agentIpv6StaticRouteTable 1 }
AgentIpv6StaticRouteEntry ::= SEQUENCE {
agentIpv6StaticRouteDest Ipv6AddressPrefix,
agentIpv6StaticRoutePfxLength INTEGER,
agentIpv6StaticRouteIfIndex Ipv6IfIndexOrZero,
agentIpv6StaticRouteNextHop Ipv6Address,
agentIpv6StaticRoutePreference INTEGER,
agentIpv6StaticRouteStatus RowStatus
}
agentIpv6StaticRouteDest OBJECT-TYPE
SYNTAX Ipv6AddressPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IPv6 address of this route.
This object may not take a Multicast address
value."
::= { agentIpv6StaticRouteEntry 1 }
agentIpv6StaticRoutePfxLength OBJECT-TYPE
SYNTAX INTEGER(0..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the prefix length of the destination
address."
::= { agentIpv6StaticRouteEntry 2 }
agentIpv6StaticRouteIfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ipv6IfIndex. For routes with global address next hop this
value can be zero."
::= { agentIpv6StaticRouteEntry 3 }
agentIpv6StaticRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next
system en route. "
::= { agentIpv6StaticRouteEntry 4 }
agentIpv6StaticRoutePreference OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing preference metric for this route. A lower
value is more preferred."
DEFVAL { 1 }
::= { agentIpv6StaticRouteEntry 5 }
agentIpv6StaticRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Creates a new entry in the Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table.
destroy(6) - Removes the associated route from the interface."
::= { agentIpv6StaticRouteEntry 6 }
--**************************************************************************************
-- agentIpv6ServicePortGroup
--
--**************************************************************************************
agentIpv6ServicePortGroup OBJECT IDENTIFIER ::= { agentIpv6Group 7 }
-- IPv6 Service Port Prefix Table
agentIpv6ServicePortPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6ServicePortPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Service Port Prefix Table. This table contains
an entry for each valid IPv6 prefix configured on the
Service Port."
::= { agentIpv6ServicePortGroup 1 }
agentIpv6ServicePortPrefixEntry OBJECT-TYPE
SYNTAX AgentIpv6ServicePortPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 Service Port Prefix entry."
INDEX { agentIpv6ServicePortPrefixIndex }
::= { agentIpv6ServicePortPrefixTable 1 }
AgentIpv6ServicePortPrefixEntry ::= SEQUENCE {
agentIpv6ServicePortPrefixIndex Unsigned32,
agentIpv6ServicePortPrefix Ipv6Address,
agentIpv6ServicePortPrefixLength Unsigned32
}
agentIpv6ServicePortPrefixIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Ipv6 Prefix Address configured on the
Service Port. Removal of a row will cause index values
to be reassigned."
::= { agentIpv6ServicePortPrefixEntry 1 }
agentIpv6ServicePortPrefix OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ipv6 Prefix Address configured on the Service Port."
::= { agentIpv6ServicePortPrefixEntry 2 }
agentIpv6ServicePortPrefixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the IPv6 Prefix Address."
::= { agentIpv6ServicePortPrefixEntry 3 }
-- IPv6 Service Port Default Router Table
agentIpv6ServicePortDefaultRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6ServicePortDefaultRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Service Port Default Router Table. This table contains
an entry for each valid IPv6 Default Router configured on the
Service Port."
::= { agentIpv6ServicePortGroup 2 }
agentIpv6ServicePortDefaultRouterEntry OBJECT-TYPE
SYNTAX AgentIpv6ServicePortDefaultRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 Service Port Default Router entry."
INDEX { agentIpv6ServicePortDefaultRouterIndex }
::= { agentIpv6ServicePortDefaultRouterTable 1 }
AgentIpv6ServicePortDefaultRouterEntry ::= SEQUENCE {
agentIpv6ServicePortDefaultRouterIndex Unsigned32,
agentIpv6ServicePortDefaultRouter Ipv6Address
}
agentIpv6ServicePortDefaultRouterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the IPv6 Default Router Address
configured on the Service Port. Removal of a
row will cause index values to be reassigned."
::= { agentIpv6ServicePortDefaultRouterEntry 1 }
agentIpv6ServicePortDefaultRouter OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Address of the IPv6 Default Router configured
on the Service Port."
::= { agentIpv6ServicePortDefaultRouterEntry 2 }
-- IPv6 Service Port Neighbor Table
agentIpv6ServicePortNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentIpv6ServicePortNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPv6 Service Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Service Port."
::= { agentIpv6ServicePortGroup 3 }
agentIpv6ServicePortNbrEntry OBJECT-TYPE
SYNTAX AgentIpv6ServicePortNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IPv6 Service Port Neighbor entry."
INDEX { agentIpv6ServicePortNbrAddr }
::= { agentIpv6ServicePortNbrTable 1 }
AgentIpv6ServicePortNbrEntry ::= SEQUENCE {
agentIpv6ServicePortNbrAddr Ipv6Address,
agentIpv6ServicePortNbrPhysAddr MacAddress,
agentIpv6ServicePortNbrState INTEGER,
agentIpv6ServicePortNbrUpdated TimeStamp,
agentIpv6ServicePortNbrIsRouter TruthValue
}
agentIpv6ServicePortNbrAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ipv6 Address of a neighbor switch visible to the Service Port."
::= { agentIpv6ServicePortNbrEntry 1 }
agentIpv6ServicePortNbrPhysAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MacAddress of the neighboring switch."
::= { agentIpv6ServicePortNbrEntry 2 }
agentIpv6ServicePortNbrState OBJECT-TYPE
SYNTAX INTEGER { reachable(1),
stale(2),
delay(3),
probe(4),
unknown(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the neighboring switch:
reachable(1) - The neighbor is reachable by this switch.
stale(2) - Information about the neighbor is scheduled for deletion.
delay(3) - No information has been received from neighbor during delay period.
probe(4) - Switch is attempting to probe for this neighbor.
unknown(6) - Unknown status."
::= { agentIpv6ServicePortNbrEntry 3 }
agentIpv6ServicePortNbrUpdated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sysUpTime that this neighbor has been updated."
::= { agentIpv6ServicePortNbrEntry 4 }
agentIpv6ServicePortNbrIsRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns true(1) if the neighbor machine is a router,
false(2) otherwise."
::= { agentIpv6ServicePortNbrEntry 5 }
--**************************************************************************************
-- agentIpv6IcmpGroup
--
--**************************************************************************************
agentIpv6IcmpControlGroup OBJECT IDENTIFIER ::= { agentIpv6Group 8 }
agentIpv6IcmpRateLimitInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time interval between tokens being placed in the bucket for
ICMP Ratelimit."
::= { agentIpv6IcmpControlGroup 1 }
agentIpv6IcmpRateLimitBurstSize OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of tokens to be placed after timeout."
::= { agentIpv6IcmpControlGroup 2 }
END