--[[	
	gluon site.conf ffrgb

        This file contains the Munich freifunk site.conf which was adopted from the original freifunk suite used in Luebeck. 
	There are comments added to most switches to explain the usage of gluon.

	This is lua code now, not perl anymore.

	Happy compiling!
]]

{
	--[[	Community settings
	hostname_prefix:	Nodename prefix
	freifunk-abcdef123456 (hex-part is generated from node's MAC address)
	site_name:			Name of your community
	site_code:			Shortcode of your community
	]]

	hostname_prefix = 'freifunk',
	site_name = 'Freifunk Regensburg',
	site_code = 'ffrgb-bat14',
	opkg_repo = 'http://openwrt.draic.info/barrier_breaker/14.07/%S/packages',


	--[[	General network settings
	prefix4:			IPv4 range of your community
	prefix6:			IPv6 range of your community
		is also required for radvd  ]]

	prefix4 = '10.80.0.0/16',
	prefix6 = 'fdef:ffc0:4fff::/64',


	--[[	NTP settings
		Synchronize the time of the nodes
		timezone: Timezone of your community
		http://wiki.openwrt.org/doc/uci/system#time.zones
		ntp_servers: List of NTP-Servers to query. You can use any public and/or your private NTP-Servers of your community.
		http://www.pool.ntp.org/zone/de ]]

	timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
	ntp_servers = {'1.ntp.services.ffm','3.ntp.services.ffm'},

	--[[	Wireless settings
		regdom: IEEE 802.11 Regulatory Domain
		http://en.wikipedia.org/wiki/IEEE_802.11#Regulatory_domains_and_legal_compliance
		wifi24: Wifi settings for 2.4 GHz frequency devices
		wifi5: Wifi settings for 5 GHz frequency devices
		sub
		ssid: Wifi name shown to the user (We recommend %site_code%.freifunk.net)
		channel: Wifi channel to use
		htmode:	Specifies the channel width in 802.11n and 802.11ac mode, possible values are:
						HT20 (single 20MHz channel),
						HT40- (2x 20MHz channels, primary/control channel is upper, secondary channel is below)
						HT40+ (2x 20MHz channels, primary/control channel is lower, secondary channel is above).
						VHT20 / VHT40 / VHT80 / VHT160 (channel width in 802.11ac, extra channels are picked according to the specification)
		http://wiki.openwrt.org/doc/uci/wireless#common.options (-> htmode)
		mesh_ssid: SSID of the mesh-interface, an ugly SSID prevent clients from connecting (We recommend not to change this)
		mesh_bssid: BSSID of the mesh-interface
		mesh_mcast_rate: multicast rate of the mesh-interface ]]

	regdom = 'DE',

	wifi24 = {
		ssid = 'regensburg.freifunk.net',
		channel = 1,
		htmode = 'HT40+',
		mesh_ssid = 'mesh.ffmuc',
		mesh_bssid = '02:0E:8E:1E:61:17',  --[[ from https://muenchen.freifunk.net/wiki/Knoten#B.A.T.M.A.N._Advanced ]]
		mesh_mcast_rate = 12000,
	},

	wifi5 = {
		ssid = 'regensburg.freifunk.net',
		channel = 44,
		htmode = 'HT40+',
		mesh_ssid = 'mesh.ffmuc',
		mesh_bssid = '02:0E:8E:1E:61:17',
		mesh_mcast_rate = 12000,
	},


	--[[	Next-Node
		next_node: Howto reach the node you are currently connected to
		The node will always be reachable at that address, and it's the same on all nodes. Because next_node packets are redirected within the node itself, there will be no conflicts.
		sub
		ip4: IPv4 Address to use
		ip6: IPv6 Address to use
		mac: MAC Address to use
		(TODO: What is the purpose of this MAC-Address here?) ]]

	next_node = {
		 ip4 = '10.80.0.1',
		 ip6 = 'fdef:ffc0:4fff::1',
		 mac = '16:41:95:40:f7:dc',
	},


	--[[	Gateway settings
		fastd_mesh_vpn:	fastd vpn settings
		https://projects.universe-factory.net/projects/fastd/wiki/User_manual
		sub
		methods: encryption algorithms to use
		https://projects.universe-factory.net/projects/fastd/wiki/Methods
		When multiple method statements are given, the first one has the highest preference.
		mtu: package size
		backbone: fastd vpn gateways of your community
		sub
		limit: Number of gateways each node connects to
		On startup, each node tries to connect to every gateway, and then chooses the number of 'limit' fastest gateways it could reach
		peers: Gateways
		sub sub
		key: public fastd key of your gateway
		https://github.com/tcatm/ecdsautils
		remotes: List of fastd configuration strings to connect to your gateway server ]]


	fastd_mesh_vpn = {
                methods = {'salsa2012+umac','salsa2012+gmac'},
                mtu = 1426,
                backbone = {
                        limit = 2,
                        peers = {
                                 vpn_gw01 = {   --[[ VPN Server von Ole (netcap) ]]
                                        key = '0ac59c349980993c99e74e1c5242c39cdd7282fbab0b9575b35762993df510f3',
                                        remotes = {'ipv4 "37.120.168.150" port 10000'},
                                        },
                                 vpn_gw04 = {   --[[ VPN Server von mephisto ]]
                                        key = '40ebfaf04da006d9150d3d8adeaab0dfa62ca645b416403537cb009bbf2125b5',
                                        remotes = {'ipv4 "213.166.225.3" port 10000'},
                                        },
                                },
                           },
                     },

       --[[	gluon autoupdater section 
		a how-to can be found here: http://gluon.readthedocs.org/en/latest/features/autoupdater.html
		enable: 0, 1 
		branch: stable, beta, experimental
		name: name of the branch
		mirrors: comma separated ipv6 based mirror-servers to access the firmware image
		good_signatures: number of at leased good signatures signed by the authors of the firmware
		pubkeys: public keys of the authors of the firmware image ]]

autoupdater = {
		enabled = 1,
		branch = 'stable',
		branches = {
			stable = {
				name = 'stable',
				mirrors = {
          'http://[fdef:ffc0:4fff::14]/firmware/stable/sysupgrade/',
        },
				probability = 0.08,
				good_signatures = 1,
				pubkeys = {
          '4d6b1a8e2ecfdb59469c38c3659916dd6046cd5270ddd31c3319b21c508eaa07', -- mephisto
				},
			},
			experimental = {
        name = 'experimental',
				mirrors = {
          'http://[fdef:ffc0:4fff::14]/firmware/experimental/sysupgrade/',
        },
				probability = 0.1,
				good_signatures = 1,
				pubkeys = {
          '4d6b1a8e2ecfdb59469c38c3659916dd6046cd5270ddd31c3319b21c508eaa07', -- mephisto
				},
			},
		},
	},



	--[[	Simple TC settings to limit the bandwidth of the vpn-uplink
		mesh_vpn:
		sub
		ifname:		name of the interface/bridge
		enabled:	default-value
		limit_egress:	default-value
		limit_ingress:	default-value ]]

	simple_tc = {
		mesh_vpn = {
			ifname = 'mesh-vpn',
			enabled = false,
			limit_egress = 200,
			limit_ingress = 3000,
		},
	},


	--[[	Config Mode settings
		Text shown on local website on node while in config mode (after initial flashing or after a long press and hold on the primary button and reboot). You can use html here.
		msg_welcome: Welcome message shown at startup
		msg_pubkey: Instructions for the user how your community handles the key exchange
		only shown if VPN setting is selected
		msg_reboot: Message shown when configuration is finished while the node is rebooting.

		Variables
		Within the text given here you can use variables which are
		replaced when the respective website is delivered to the user.
		Variables must be used in the format <%=NAME%>. See msg_pubkey for an example.
		hostname: hostname of the node
		pubkey: fastd public key of the node
		sysconfig.primary_mac	the primary mac of the node, also found printed beneath the device
		... other sysconfig.* variables: config_ifname, lan_ifname, wan_ifname ]]


	config_mode = {
		msg_welcome = [[
Willkommen zum Einrichtungsassistenten für deinen neuen Regensburger
Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen
entsprechend aus und sende es ab.
]],
		msg_pubkey = [[
<p>
Dies ist der öffentliche Schlüssel deines Freifunk-Knotens. Erst nachdem
er auf den Servern des Münchener Freifunk-Projektes eingetragen wurde,
kann sich dein Knoten mit dem Münchner Mesh-VPN verbinden.
(Regensburg läuft derzeit im Münchener Mesh mit.)
</p>

<p>
Um deinen Knoten einzutragen, öffne in einem Browser deiner Wahl bitte <a href="http://key.freifunk-muenchen.de/?key=<%=pubkey%>&name=<%=hostname%>&mac=<%=sysconfig.primary_mac%>" target="_blank">Keyformular</a>, fülle das Formular aus und schicke es ab.

</p>

<p>Informationen für das Formular:
	<ul>
		<li>Knotenname: <%=hostname%></li>
		<li>MAC-Adresse: <%=sysconfig.primary_mac%></li>
		<li>Key: <%=pubkey%></li>
	</ul>
</p>

<p>
Sollte das Formular nicht verfügbar sein, sende bitte eine Mail an <a href="mailto:mail@dreessen.de">Ole</a> oder <a href="mailto:Frnk@bk.ru">frnk</a>.
</p>
]],
		msg_reboot = [[
<p>
Dein Knoten startet gerade neu und wird anschließend versuchen,
sich mit anderen Freifunk-Knoten in seiner Nähe zu
verbinden. Weitere Informationen zur
Regensburger Freifunk-Community findest du auf
<a href="http://regensburg.freifunk.net/">unserer Webseite</a>.
</p>
<p>
Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!
</p>
]],
	},
}
-- vim: set ft=lua:ts=2:sw=2:et