diff --git a/schematics/Doorlock.brd b/schematics/Doorlock.brd index 5c32f20..4d5364d 100644 --- a/schematics/Doorlock.brd +++ b/schematics/Doorlock.brd @@ -1,19 +1,33 @@ - + - + + + + + + + + + + + + + + + - + @@ -22,29 +36,38 @@ - - - - - - - - - - + + + + + + + + + + - - - - + + + + + + + + + + + + + @@ -54,13 +77,87 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - +©Binary Kitchen e.V. +Ralf Ramsauer @@ -1112,75 +1209,104 @@ for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trim </tr> </table> - -<b>CAPACITOR</b><p> -grid 2.5 mm, outline 2.4 x 4.4 mm - - - - - - - - - - - - - - ->NAME ->VALUE + +<b>CAPACITOR</b><p> + + + + + + + + +>NAME +>VALUE + + + - -<b>RESISTOR</b><p> -type 0204, grid 5 mm - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - + <b>ELECTROLYTIC CAPACITOR</b><p> -grid 7.62 mm, diameter 18 mm - - - - - - - - - - - - ->NAME ->VALUE - +grid 5.08 mm, diameter 10.5 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> + + + + + + + + +>NAME +>VALUE + + + + +<b>Diodes</b><p> +Based on the following sources: +<ul> +<li>Motorola : www.onsemi.com +<li>Fairchild : www.fairchildsemi.com +<li>Philips : www.semiconductors.com +<li>Vishay : www.vishay.de +</ul> +<author>Created by librarian@cadsoft.de</author> + + +<b>Molded plasitc,JEDEC SOD-123/Mini SMA</b><p> +Source: Comchip CGRM4001-G.pdf + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + +Molded plasitc,JEDEC SOD-123/Mini SMA +Source: Comchip CGRM4001-G.pdf + + + + + + <b>AVR Devices</b><p> Configurable logic, microcontrollers, nonvolatile memories<p> @@ -1193,238 +1319,173 @@ Based on the following sources:<p> </ul> <author>Revised by librarian@cadsoft.de</author> - -<B>Dual In Line</B> - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + +<B>Small Outline Package</B> SOIC 0.300" + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + - -<b>Maxim Components</b><p> - + +<b>Opto Couplers</b><p> +Siemens, Hewlett-Packard, Texas Instuments, Sharp, Motorola<p> <author>Created by librarian@cadsoft.de</author> - -<b>Dual In Line Package</b> - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - -<b>Pin Header Connectors</b><p> -<author>Created by librarian@cadsoft.de</author> - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - + +<b>Small Outline Package</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + +Small Outline Package + + + + + <b>Crystals and Crystal Resonators</b><p> <author>Created by librarian@cadsoft.de</author> - + <b>CRYSTAL</b> - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + @@ -1494,152 +1555,786 @@ Low profile connectors, straight<p> - -<b>SUB-D Connectors</b><p> -Harting<br> -NorComp<br> + +<b>Raspberry Pi</b> by <b>Martin's Bastelstube</b> <p> -PREFIX :<br> -H = High density<br> -F = Female<br> -M = Male<p> -NUMBER: Number of pins<p> -SUFFIX :<br> -H = Horizontal<br> -V = Vertical <br> -P = Shield pin on housing<br> -B = No mounting holes<br> -S = Pins individually placeable (Single)<br> -D = Direct mounting <p> -<author>Created by librarian@cadsoft.de</author> +Different shapes of piggyback boards for the famous &amp; fabulous +<a href="http://www.raspberrypi.org/">Raspberry Pi</a> computer. +<p> +The outline of the Raspberry Pi board is drawn on layer 52 bDocu, so you can make it invisible if necessary.<br/> +Recommendation: Start your design with RASPI_BOARD_*_FULL, so you are aware of all the big components and +connectors when you're drawing the dimensions of your board and placing your own components.<br/> +Later, you can simply change the package of your Raspberry Pi connector to the RASPI_BOARD_*_EDGES type, +so you can concentrate on your own design. +<p> +Most of my board packages don't have the outline drawn in layer 20 Dimension (except the HATs). This allows you to deviate from the original Raspberry Pi board shape, e.g. when you need more space behind the GPIO connector for the routing of the power supply lines. If you want to stick exactly to the Raspberry Pi board shape, then just draw the Dimension layer right on the lines in layer bDocu. + +<hr><br/> + +Version 1.3 +<ul> +<li>Added the shape and dimensions of the HAT board with &amp; without the camera and display flex cutout</li> +<li>New GPIO connector version (suffix &quot;#&quot;) with all pins connected (no more &quot;n.c.&quot; pins)</li> +<li>Two more &quot;AB-&quot; boards with 5 and 6 drill holes / pads, mechanically compatible with all RasPi versions</li> +</ul> + +Version 1.2 +<ul> +<li>Added a 26-pin GPIO connector with board dimensions of model B+<br/> + for backwards compatibility with models A and B, named &quot;B-&quot;</li> +</ul> + +Version 1.1 +<ul> +<li>New GPIO connector and board dimensions of model B+</li> +<li>Old connector and board (for models A and B) renamed to AB</li> +<li>GPIO pin numbers on connector changed to match Rev2 board design</li> +</ul> + +Version 1.0 +<ul> +<li>More detailed descriptions for all components</li> +<li>Published on Cadsoft webpage</li> +</ul> + +<hr><br/> + +Designed by <a href="http://bastelstube.rocci.net/">Martin's Bastelstube</a><br> +Comments / complaints / bug reports / suggestions to <author>eightbit@web.de</author> - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -1 -5 -9 -6 -2,54 -F09 - - - - - - - - - - - + +Raspberry Pi board model B+ HAT board<br/> +Official outline, but without cutouts for display &amp; camera flex connector + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + + + + + + + + - + +<h2>RIA Connectors</h2> + + +<b>RIA 182<br> +RIA 169</b><br> +<br> +www.HarryGr.de + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + <b>Transistors</b><p> <author>Created by librarian@cadsoft.de</author> - -<b>TO-92</b> Pads In Line C B E from top<p> - - - - - - - - - - - - - - - - ->NAME ->VALUE + +TO-236 ITT Intermetall + + + + + + + +>NAME +>VALUE + + + + + +TO-236 ITT Intermetall + + + + + - + <b>Relays</b><p> <ul> <li>Eichhoff @@ -1654,48 +2349,65 @@ D = Direct mounting <p> </ul> <author>Created by librarian@cadsoft.de</author> - + <b>RELAY</b><p> -1 x switch, same as V23101-D6-A201, Siemens - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE +1 x switch, 0.5 A/125 V AC, 1 A/24 V DC , Omron + + + + + + + + + + +>NAME +>VALUE + + +RELAY +1 x switch, 0.5 A/125 V AC, 1 A/24 V DC , Omron + + + + + + + +<b>LEDs</b><p> +<author>Created by librarian@cadsoft.de</author><br> +Extended by Federico Battaglin <author>&lt;federico.rd@fdpinternational.com&gt;</author> with DUOLED + + +<b>Hyper CHIPLED Hyper-Bright LED</b><p> +LB R99A<br> +Source: http://www.osram.convergy.de/ ... lb_r99a.pdf + + + + +>NAME +>VALUE + + + + + + + + + +Hyper CHIPLED Hyper-Bright LED +LB R99A +Source: http://www.osram.convergy.de/ ... lb_r99a.pdf + + + + + @@ -1706,7 +2418,7 @@ D = Direct mounting <p> - + <b>EAGLE Design Rules</b> <p> Die Standard-Design-Rules sind so gewählt, dass sie für @@ -1721,26 +2433,28 @@ a wide range of applications. Your particular design may have different requirements, so please make the necessary adjustments and save your customized design rules under a new name. +<b>Elecrow PCB EAGLE Design Rules</b> + - - + + - - + + - - - - + + + + - - + + - - - + + + @@ -1749,15 +2463,15 @@ design rules under a new name. - + - + - + - + - + @@ -1765,16 +2479,16 @@ design rules under a new name. - + - - + + - + @@ -1782,10 +2496,14 @@ design rules under a new name. - - + + + + + + @@ -1886,327 +2604,741 @@ design rules under a new name. - - - - - - - - - - - + + + + + + + + + + + + + + - - - - - + + + + + - - - - - - - - + + + + + - - - - - + + + + + + + + + + + + + + + + + + + + - - - - - + + + + + + + + + + + - - - - - - - - - - - - - - - - - - + + + + + - - - - - - - - - - + + + + - + + + + + + + - + + + + + + - + + + + + + + + + - - - - + - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - + + + + + + + + - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + + + + - - + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + - - - - - + + + + + + + + + + + + + + + + - - + + + + - - + + + + - + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - + + + + + + + + + + - - - + + + + + + - - - - + + + + + - - - + + + + + + + + - - - + + + + + + + + - - + + + + + + - - + + + + - - + + + + + + + + + + + + - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + +Since Version 8.2, EAGLE supports online libraries. The ids +of those online libraries will not be understood (or retained) +with this version. + + +Since Version 8.3, EAGLE supports URNs for individual library +assets (packages, symbols, and devices). The URNs of those assets +will not be understood (or retained) with this version. + + +Since Version 8.3, EAGLE supports the association of 3D packages +with devices in libraries, schematics, and board files. Those 3D +packages will not be understood (or retained) with this version. + + diff --git a/schematics/Doorlock.sch b/schematics/Doorlock.sch index 49e8aa0..302afcb 100644 --- a/schematics/Doorlock.sch +++ b/schematics/Doorlock.sch @@ -1,19 +1,34 @@ - + + + + + + + + + + + + + + + + - + @@ -43,8 +58,17 @@ - + + + + + + + + + + @@ -54,6 +78,82 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -13902,1189 +14002,1848 @@ Source: http://products.nichicon.co.jp/en/pdf/XJA043/e-ud.pdf - -<b>SUB-D Connectors</b><p> -Harting<br> -NorComp<br> + +<b>Frames for Sheet and Layout</b> + + + + + + + + + + + + + + + + + + + + + + + + + + +Date: +>LAST_DATE_TIME +Sheet: +>SHEET +REV: +TITLE: +Document Number: +>DRAWING_NAME + + + + +<b>FRAME</b> A Size , 8 1/2 x 11 INCH, Landscape<p> + + + + + + + + + + + + + + + +<h3>SparkFun Power Symbols</h3> +This library contains power, ground, and voltage-supply symbols. +<br> +<br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application. +<br> +<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. +<br> +<br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br> +<br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + +<h3>Digital Ground Supply</h3> + + +>VALUE + + +<h3>VCC Voltage Supply</h3> + + + +>VALUE + + + + +<h3>Ground Supply Symbol</h3> +<p>Generic signal ground supply symbol.</p> + + + + + + + + + + + + +<h3>VCC Voltage Supply</h3> +<p>Positive voltage supply (traditionally for a BJT device, C=collector).</p> + + + + + + + + + + + + + + +<b>Diodes</b><p> +Based on the following sources: +<ul> +<li>Motorola : www.onsemi.com +<li>Fairchild : www.fairchildsemi.com +<li>Philips : www.semiconductors.com +<li>Vishay : www.vishay.de +</ul> +<author>Created by librarian@cadsoft.de</author> + + +<b>Molded plasitc,JEDEC SOD-123/Mini SMA</b><p> +Source: Comchip CGRM4001-G.pdf + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + +Molded plasitc,JEDEC SOD-123/Mini SMA +Source: Comchip CGRM4001-G.pdf + + + + + + + + + + + + +>NAME +>VALUE +SpiceOrder 1 +SpiceOrder 2 + + + + + + +<b>Molded plasitc,JEDEC SOD-123/Mini SMA</b><p> +Source: Comchip CGRM4001-G.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Supply Symbols</b><p> + GND, VCC, 0V, +5V, -5V, etc.<p> + Please keep in mind, that these devices are necessary for the + automatic wiring of the supply signals.<p> + The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> + In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> + <author>Created by librarian@cadsoft.de</author> + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<b>Supply Symbols</b><p> +GND, VCC, 0V, +5V, -5V, etc.<p> +Please keep in mind, that these devices are necessary for the +automatic wiring of the supply signals.<p> +The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> +In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> +<author>Created by librarian@cadsoft.de</author> + + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<b>Opto Couplers</b><p> +Siemens, Hewlett-Packard, Texas Instuments, Sharp, Motorola<p> +<author>Created by librarian@cadsoft.de</author> + + +<b>Small Outline Package</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + +Small Outline Package + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +<b>Siemens ILD205/206/207/211/213/217</b><p> +DUAL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLER<br> +Source: 153385-da-01-en-Optocoupler_ILD205-T.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Raspberry Pi</b> by <b>Martin's Bastelstube</b> <p> -PREFIX :<br> -H = High density<br> -F = Female<br> -M = Male<p> -NUMBER: Number of pins<p> -SUFFIX :<br> -H = Horizontal<br> -V = Vertical <br> -P = Shield pin on housing<br> -B = No mounting holes<br> -S = Pins individually placeable (Single)<br> -D = Direct mounting <p> -<author>Created by librarian@cadsoft.de</author> - - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -1 -5 -9 -6 -Board -F09D -Board - - - - - - - - - - - - - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -1 -5 -9 -6 -2,54 -F09 - - - - - - - - - - - - - - - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE -1 -5 -9 -6 -2,54 -F09 - - - - - - - - - - - - - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 -2 -3 -4 -5 -6 -7 -8 -9 ->NAME ->VALUE - - - - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 -2 -3 -4 -5 -6 -7 -8 -9 ->NAME ->VALUE - - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 -2 -3 -4 -5 -6 -7 -8 -9 ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - ->VALUE ->NAME - - - - - - - - - - - - - -<b>SUB-D</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Maxim Components</b><p> +Different shapes of piggyback boards for the famous &amp; fabulous +<a href="http://www.raspberrypi.org/">Raspberry Pi</a> computer. +<p> +The outline of the Raspberry Pi board is drawn on layer 52 bDocu, so you can make it invisible if necessary.<br/> +Recommendation: Start your design with RASPI_BOARD_*_FULL, so you are aware of all the big components and +connectors when you're drawing the dimensions of your board and placing your own components.<br/> +Later, you can simply change the package of your Raspberry Pi connector to the RASPI_BOARD_*_EDGES type, +so you can concentrate on your own design. +<p> +Most of my board packages don't have the outline drawn in layer 20 Dimension (except the HATs). This allows you to deviate from the original Raspberry Pi board shape, e.g. when you need more space behind the GPIO connector for the routing of the power supply lines. If you want to stick exactly to the Raspberry Pi board shape, then just draw the Dimension layer right on the lines in layer bDocu. -<author>Created by librarian@cadsoft.de</author> +<hr><br/> + +Version 1.3 +<ul> +<li>Added the shape and dimensions of the HAT board with &amp; without the camera and display flex cutout</li> +<li>New GPIO connector version (suffix &quot;#&quot;) with all pins connected (no more &quot;n.c.&quot; pins)</li> +<li>Two more &quot;AB-&quot; boards with 5 and 6 drill holes / pads, mechanically compatible with all RasPi versions</li> +</ul> + +Version 1.2 +<ul> +<li>Added a 26-pin GPIO connector with board dimensions of model B+<br/> + for backwards compatibility with models A and B, named &quot;B-&quot;</li> +</ul> + +Version 1.1 +<ul> +<li>New GPIO connector and board dimensions of model B+</li> +<li>Old connector and board (for models A and B) renamed to AB</li> +<li>GPIO pin numbers on connector changed to match Rev2 board design</li> +</ul> + +Version 1.0 +<ul> +<li>More detailed descriptions for all components</li> +<li>Published on Cadsoft webpage</li> +</ul> + +<hr><br/> + +Designed by <a href="http://bastelstube.rocci.net/">Martin's Bastelstube</a><br> +Comments / complaints / bug reports / suggestions to <author>eightbit@web.de</author> - -<b>Dual In Line Package</b> - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + +Raspberry Pi board model B+, full outline with position of big connectors &amp; drill holes + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Raspberry Pi board model B+, full outline with position of big connectors &amp; mounting pads + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Raspberry Pi board model B+, outline is only marked by its edges<br> +without any drill holes + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + +Raspberry Pi board model B+, outline is only marked by its edges<br> +with 3 drill holes (top left hole is missing to allow routing of power supply lines) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + +Raspberry Pi board model B+, outline is only marked by its edges<br> +with 3 mounting pads (top left pad is missing to allow routing of power supply lines) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + +Raspberry Pi board model B+, outline is only marked by its edges<br/> +with all 4 drill holes + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + +Raspberry Pi board model B+, outline is only marked by its edges<br/> +with all 4 mounting pads + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + +Raspberry Pi board model B+ HAT board<br/> +Official outline, but without cutouts for display &amp; camera flex connector + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + + + + + + + + + + +Raspberry Pi board model B+ HAT board<br/> +Official outline with cutout for display flex connector + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + + + + + + + + + + + + + + + + +Display Flex Slot + + +Raspberry Pi board model B+ HAT board<br/> +Official outline with cutouts for display &amp; camera flex connector + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 + + + + + + + + + + + + + + + + + + + + + + + + + + + +Display Flex Slot +Camera Flex Slot - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - -GND -VCC ->NAME - - + +Generic schematic symbol for the Raspberry Pi GPIO connector<br/> +Model B+ &nbsp; all pins connected + + + + +Raspberry Pi +GPIO Port + + + + + + + + + + + + + + + + + + + + + + + + + + +Model B+ + + + + + + + + + + + + + + - -<b>RS232 TRANSCEIVER</b> + +Raspberry Pi GPIO connector with markings for the outer dimensions of the Raspberry Pi board model B+<br> +with different sets of drill holes or mounting pads<br/> +All pins connected - - + - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Pin Header Connectors</b><p> -<author>Created by librarian@cadsoft.de</author> - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - -CON-M-1X5-200 ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - -<b>PIN HEADER</b> - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - -<b>PIN HEADER</b> - - - - - + - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - -<b>PIN HEADER</b> - - - - - + - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -15094,11 +15853,1528 @@ D = Direct mounting <p> - + +<h2>RIA Connectors</h2> + + +<b>RIA 182<br> +RIA 169</b><br> +<br> +www.HarryGr.de + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +mit Stecker RIA 169 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +mit Stecker RIA 169 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +mit Stecker RIA 169 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME + + + + + +Gewinkelter Wannenstecker<br> +4-polig<br> +Rastermaß: 3,5mm<br> +Lötstift / Steckerstift: 1x1mm<br> +Bohrung: 1,5mm<br> +Bemessungsstrom: 5A<br> +Nennquerschnitt Stecker: 1,5qmm eindrähtig / 1qmm feinstdrähtig + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Gewinkelter Wannenstecker<br> +7-polig<br> +Rastermaß: 3,5mm<br> +Lötstift / Steckerstift: 1x1mm<br> +Bohrung: 1,5mm<br> +Bemessungsstrom: 5A<br> +Nennquerschnitt Stecker: 1,5qmm eindrähtig / 1qmm feinstdrähtig + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Gewinkelter Wannenstecker<br> +5-polig<br> +Rastermaß: 3,5mm<br> +Lötstift / Steckerstift: 1x1mm<br> +Bohrung: 1,5mm<br> +Bemessungsstrom: 5A<br> +Nennquerschnitt Stecker: 1,5qmm eindrähtig / 1qmm feinstdrähtig + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + <b>Transistors</b><p> <author>Created by librarian@cadsoft.de</author> - + <b>TO-3</b> @@ -15126,7 +17402,7 @@ D = Direct mounting <p> E B - + <b>TO 18</b> @@ -15147,7 +17423,7 @@ D = Direct mounting <p> 2 3 - + <b>TO-18</b> @@ -15168,7 +17444,7 @@ D = Direct mounting <p> 2 3 - + <b>TO 202 horizontal</b> @@ -15213,7 +17489,7 @@ D = Direct mounting <p> - + <b>TO 202 vertical</b> @@ -15237,7 +17513,7 @@ D = Direct mounting <p> - + SOT-93<p> grid 5.45 mm @@ -15284,7 +17560,7 @@ grid 5.45 mm - + SOT-93<p> grid 5.45 mm @@ -15305,7 +17581,7 @@ grid 5.45 mm >NAME - + <b>TO 126 horizontal</b> @@ -15341,7 +17617,7 @@ grid 5.45 mm - + <b>TO 126 vertical</b> @@ -15371,7 +17647,7 @@ grid 5.45 mm - + <b>TO 218 horizontal</b> @@ -15418,7 +17694,7 @@ grid 5.45 mm - + <b>TO 218 vertical</b> @@ -15442,7 +17718,7 @@ grid 5.45 mm - + <b>TO 220 horizontal</b> @@ -15483,7 +17759,7 @@ grid 5.45 mm - + <b>TO 220 vertical</b> @@ -15505,7 +17781,7 @@ grid 5.45 mm - + <b>TO-225</b><p> grid 2.54 mm, vertical @@ -15544,7 +17820,7 @@ grid 2.54 mm, vertical - + <b>TO-39</b> @@ -15557,7 +17833,7 @@ grid 2.54 mm, vertical >NAME >VALUE - + <b>TO 5</b> @@ -15570,7 +17846,7 @@ grid 2.54 mm, vertical >NAME >VALUE - + <b>TO-66</b> @@ -15594,7 +17870,7 @@ grid 2.54 mm, vertical 2 1 - + <b>TO 92</b> @@ -15615,7 +17891,7 @@ grid 2.54 mm, vertical 3 1 - + <b>TO-92</b> Pads In Line E B C from top<p> @@ -15636,7 +17912,7 @@ grid 2.54 mm, vertical >NAME >VALUE - + <b>TO-92</b> Pads Triangle Reverse @@ -15653,7 +17929,7 @@ grid 2.54 mm, vertical >NAME >VALUE - + <b>TO-92</b><p> grid 5.08 mm @@ -15675,7 +17951,7 @@ grid 5.08 mm >NAME >VALUE - + <b>TOP 3 horizontal</b> @@ -15714,7 +17990,7 @@ grid 5.08 mm - + <b>TOP 3 vertical</b> @@ -15744,7 +18020,7 @@ grid 5.08 mm - + TO-236 ITT Intermetall @@ -15759,7 +18035,7 @@ grid 5.08 mm - + <b>SOT-23 (EBC)</b> @@ -15774,7 +18050,7 @@ grid 5.08 mm - + <b>TO-92</b> Pads In Line B C E from top<p> @@ -15795,7 +18071,7 @@ grid 5.08 mm >NAME >VALUE - + <b>TO-92</b> Pads In Line C B E from top<p> @@ -15816,7 +18092,7 @@ grid 5.08 mm >NAME >VALUE - + <b>TO-92</b> Pads In Line B E C from top<p> @@ -15837,7 +18113,7 @@ grid 5.08 mm >NAME >VALUE - + <b>TO-92</b> Pads In Line C E B from top<p> @@ -15858,7 +18134,7 @@ grid 5.08 mm >NAME >VALUE - + SC59 (SOT23) Motorola @@ -15873,7 +18149,7 @@ grid 5.08 mm - + SOT89 Basis Collector Emitter @@ -15930,7 +18206,7 @@ grid 5.08 mm - + <b>SOT-37</b><p> Motorola CASE 317A-01 ISSUE B<br> http://www.ee.siue.edu/~alozows/library/datasheets/BFR96.pdf @@ -16000,7 +18276,7 @@ http://www.ee.siue.edu/~alozows/library/datasheets/BFR96.pdf - + <b>TO-92</b> Pads In Line E C B from top<p> @@ -16022,8 +18298,214 @@ http://www.ee.siue.edu/~alozows/library/datasheets/BFR96.pdf >VALUE + + +TO-3 + + + + + +TO 18 + + + + + +TO-18 + + + + + +TO 202 horizontal + + + + + +TO 202 vertical + + + + + +SOT-93 +grid 5.45 mm + + + + + +SOT-93 +grid 5.45 mm + + + + + +TO 126 horizontal + + + + + +TO 126 vertical + + + + + +TO 218 horizontal + + + + + +TO 218 vertical + + + + + +TO 220 horizontal + + + + + +TO 220 vertical + + + + + +TO-225 +grid 2.54 mm, vertical + + + + + +TO-39 + + + + + +TO 5 + + + + + +TO-66 + + + + + +TO 92 + + + + + +TO-92 Pads In Line E B C from top + + + + + +TO-92 Pads Triangle Reverse + + + + + +TO-92 +grid 5.08 mm + + + + + +TOP 3 horizontal + + + + + +TOP 3 vertical + + + + + +TO-236 ITT Intermetall + + + + + +SOT-23 (EBC) + + + + + +TO-92 Pads In Line B C E from top + + + + + +TO-92 Pads In Line C B E from top + + + + + +TO-92 Pads In Line B E C from top + + + + + +TO-92 Pads In Line C E B from top + + + + + +SC59 (SOT23) Motorola + + + + + +SOT89 Basis Collector Emitter + + + + + +SOT-37 +Motorola CASE 317A-01 ISSUE B +http://www.ee.siue.edu/~alozows/library/datasheets/BFR96.pdf + + + + + +TO-92 Pads In Line E C B from top + + + + + - + @@ -16043,7 +18525,7 @@ http://www.ee.siue.edu/~alozows/library/datasheets/BFR96.pdf - + NPN Transistror<p> BF959 corrected 2008.03.06<br> @@ -16056,6 +18538,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16066,6 +18551,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16097,6 +18585,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16107,6 +18598,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16117,6 +18611,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16127,6 +18624,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16137,6 +18637,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16147,6 +18650,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16157,6 +18663,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16167,6 +18676,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16177,6 +18689,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16187,6 +18702,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16197,6 +18715,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16207,6 +18728,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16217,6 +18741,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16245,6 +18772,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16255,6 +18785,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16265,6 +18798,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16275,6 +18811,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16297,6 +18836,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16307,6 +18849,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16317,6 +18862,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16327,6 +18875,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16337,6 +18888,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16423,6 +18977,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16433,6 +18990,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16444,6 +19004,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16495,6 +19058,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16507,6 +19073,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16519,6 +19088,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16532,6 +19104,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16547,6 +19122,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16557,6 +19135,9 @@ BF959 corrected 2008.03.06<br> + + + @@ -16572,7 +19153,7 @@ BF959 corrected 2008.03.06<br> - + <b>Relays</b><p> <ul> <li>Eichhoff @@ -16587,50 +19168,34 @@ BF959 corrected 2008.03.06<br> </ul> <author>Created by librarian@cadsoft.de</author> - + <b>RELAY</b><p> -1 x switch, same as V23101-D6-A201, Siemens - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE +1 x switch, 0.5 A/125 V AC, 1 A/24 V DC , Omron + + + + + + + + + + +>NAME +>VALUE + + +RELAY +1 x switch, 0.5 A/125 V AC, 1 A/24 V DC , Omron + + + + + - + @@ -16647,7 +19212,7 @@ BF959 corrected 2008.03.06<br> - + @@ -16663,29 +19228,32 @@ BF959 corrected 2008.03.06<br> - + <b>RELAY</b><p> -1 x switch, same as V23101-D6-A201, Siemens +1 x switch, 0.5 A/125 V AC, 1 A/24 V DC , Omron - + - + - - - - - - + + + + + + + + + - - - + + + @@ -16693,53 +19261,1911 @@ BF959 corrected 2008.03.06<br> - -<b>Frames for Sheet and Layout</b> + +<b>LEDs</b><p> +<author>Created by librarian@cadsoft.de</author><br> +Extended by Federico Battaglin <author>&lt;federico.rd@fdpinternational.com&gt;</author> with DUOLED + +<b>CHICAGO MINIATURE LAMP, INC.</b><p> +7022X Series SMT LEDs 1206 Package Size + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +<B>LED</B><p> +5 mm, square, Siemens + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<B>LED</B><p> +2 x 5 mm, rectangle + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<B>LED</B><p> +3 mm, round + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>LED</B><p> +5 mm, round + + + + + + + + + + + +>NAME +>VALUE + + +<B>LED</B><p> +1 mm, round, Siemens + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<B>LED BLOCK</B><p> +1 LED, Siemens + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + +A+ +K- +>NAME +>VALUE + + + + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE ++ +- + + +<B>IR LED</B><p> +infrared emitting diode, Infineon +TO-18, lead spacing 2.54 mm, cathode marking<p> +Inifineon + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>IR LED</B><p> +infrared emitting diode, Infineon +TO-18, lead spacing 2.54 mm, cathode marking<p> +Inifineon + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>LED</B><p> +rectangle, 5.7 x 3.2 mm + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>IR LED</B><p> +IR transmitter Siemens + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>TOPLED® High-optical Power LED (HOP)</b><p> +Source: http://www.osram.convergy.de/ ... ls_t675.pdf + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +A +C + + + + + + + +<b>BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED</b><p> +Source: http://www.osram.convergy.de/ ... LB M676.pdf + + + + + + + + + + + + + + +A +C +>NAME +>VALUE + + + + + + + +<b>Super SIDELED® High-Current LED</b><p> +LG A672, LP A672 <br> +Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13) + + + + + + + + + + + + + + + + + + + +C +A +>NAME +>VALUE + + + + + + + +<b>SmartLEDTM Hyper-Bright LED</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf + + + + + + + + +>NAME +>VALUE + + + + + +<b>Hyper TOPLED® RG Hyper-Bright LED</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +A +C + + + + + + + + + + +<b>Hyper Micro SIDELED®</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<b>Power TOPLED®</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +C +A +C +C + + + + + + + + + + + +<b>Hyper CHIPLED Hyper-Bright LED</b><p> +LB Q993<br> +Source: http://www.osram.convergy.de/ ... Lb_q993.pdf + + + + +>NAME +>VALUE + + + + + + + +<b>Hyper CHIPLED Hyper-Bright LED</b><p> +LB R99A<br> +Source: http://www.osram.convergy.de/ ... lb_r99a.pdf + + + + +>NAME +>VALUE + + + + + + + +<b>Mini TOPLED Santana®</b><p> +Source: http://www.osram.convergy.de/ ... LG M470.pdf + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +<b>CHIPLED</b><p> +Source: http://www.osram.convergy.de/ ... LG_R971.pdf + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +<b>CHIPLED</b><p> +Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +<b>CHIPLED</b><p> +Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +<b>CHIPLED-0603</b><p> +Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br> +Package able to withstand TTW-soldering heat<br> +Package suitable for TTW-soldering<br> +Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +<b>SmartLED TTW</b><p> +Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br> +Package able to withstand TTW-soldering heat<br> +Package suitable for TTW-soldering<br> +Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +<b>Lumileds Lighting. LUXEON®</b> with cool pad<p> +Source: K2.pdf + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Lumileds Lighting. LUXEON®</b> without cool pad<p> +Source: K2.pdf + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + +<B>LED</B><p> +10 mm, round + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>SURFACE MOUNT LED LAMP</b> 3.5x2.8mm<p> +Source: http://www.kingbright.com/manager/upload/pdf/KA-3528ASYC(Ver1189474662.1) + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +<b>SML0805-2CW-TR (0805 PROFILE)</b> COOL WHITE<p> +Source: http://www.ledtronics.com/ds/smd-0603/Dstr0093.pdf + + + + + + + + + + + +>NAME +>VALUE + + +<b>SML10XXKH-TR (HIGH INTENSITY) LED</b><p> +<table> +<tr><td>SML10R3KH-TR</td><td>ULTRA RED</td></tr> +<tr><td>SML10E3KH-TR</td><td>SUPER REDSUPER BLUE</td></tr> +<tr><td>SML10O3KH-TR</td><td>SUPER ORANGE</td></tr> +<tr><td>SML10PY3KH-TR</td><td>PURE YELLOW</td></tr> +<tr><td>SML10OY3KH-TR</td><td>ULTRA YELLOW</td></tr> +<tr><td>SML10AG3KH-TR</td><td>AQUA GREEN</td></tr> +<tr><td>SML10BG3KH-TR</td><td>BLUE GREEN</td></tr> +<tr><td>SML10PB1KH-TR</td><td>SUPER BLUE</td></tr> +<tr><td>SML10CW1KH-TR</td><td>WHITE</td></tr> +</table> + +Source: http://www.ledtronics.com/ds/smd-1206/dstr0094.PDF + + + + + + + +>NAME +>VALUE + + + + + + + + + +<b>SML0603-XXX (HIGH INTENSITY) LED</b><p> +<table> +<tr><td>AG3K</td><td>AQUA GREEN</td></tr> +<tr><td>B1K</td><td>SUPER BLUE</td></tr> +<tr><td>R1K</td><td>SUPER RED</td></tr> +<tr><td>R3K</td><td>ULTRA RED</td></tr> +<tr><td>O3K</td><td>SUPER ORANGE</td></tr> +<tr><td>O3KH</td><td>SOFT ORANGE</td></tr> +<tr><td>Y3KH</td><td>SUPER YELLOW</td></tr> +<tr><td>Y3K</td><td>SUPER YELLOW</td></tr> +<tr><td>2CW</td><td>WHITE</td></tr> +</table> +Source: http://www.ledtronics.com/ds/smd-0603/Dstr0092.pdf + + + + + + + + + + +>NAME +>VALUE + + + + + +CHICAGO MINIATURE LAMP, INC. +7022X Series SMT LEDs 1206 Package Size + + + + + +LED +5 mm, square, Siemens + + + + + +LED +2 x 5 mm, rectangle + + + + + +LED +3 mm, round + + + + + +LED +5 mm, round + + + + + +LED +1 mm, round, Siemens + + + + + +LED BLOCK +1 LED, Siemens + + + + + +LED HOLDER +Siemens + + + + + +LED HOLDER +Siemens + + + + + +LED HOLDER +Siemens + + + + + +LED HOLDER +Siemens + + + + + +IR LED +infrared emitting diode, Infineon +TO-18, lead spacing 2.54 mm, cathode marking +Inifineon + + + + + +IR LED +infrared emitting diode, Infineon +TO-18, lead spacing 2.54 mm, cathode marking +Inifineon + + + + + +LED +rectangle, 5.7 x 3.2 mm + + + + + +IR LED +IR transmitter Siemens + + + + + +TOPLED® High-optical Power LED (HOP) +Source: http://www.osram.convergy.de/ ... ls_t675.pdf + + + + + +BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED +Source: http://www.osram.convergy.de/ ... LB M676.pdf + + + + + +Super SIDELED® High-Current LED +LG A672, LP A672 +Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13) + + + + + +SmartLEDTM Hyper-Bright LED +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf + + + + + +Hyper TOPLED® RG Hyper-Bright LED +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf + + + + + +Hyper Micro SIDELED® +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf + + + + + +Power TOPLED® +Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf + + + + + +Hyper CHIPLED Hyper-Bright LED +LB Q993 +Source: http://www.osram.convergy.de/ ... Lb_q993.pdf + + + + + +Hyper CHIPLED Hyper-Bright LED +LB R99A +Source: http://www.osram.convergy.de/ ... lb_r99a.pdf + + + + + +Mini TOPLED Santana® +Source: http://www.osram.convergy.de/ ... LG M470.pdf + + + + + +CHIPLED +Source: http://www.osram.convergy.de/ ... LG_R971.pdf + + + + + +CHIPLED +Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf + + + + + +CHIPLED +Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf + + + + + +CHIPLED-0603 +Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603 +Package able to withstand TTW-soldering heat +Package suitable for TTW-soldering +Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf + + + + + +SmartLED TTW +Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603 +Package able to withstand TTW-soldering heat +Package suitable for TTW-soldering +Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf + + + + + +Lumileds Lighting. LUXEON® with cool pad +Source: K2.pdf + + + + + +Lumileds Lighting. LUXEON® without cool pad +Source: K2.pdf + + + + + +LED +10 mm, round + + + + + +SURFACE MOUNT LED LAMP 3.5x2.8mm +Source: http://www.kingbright.com/manager/upload/pdf/KA-3528ASYC(Ver1189474662.1) + + + + + +SML0805-2CW-TR (0805 PROFILE) COOL WHITE +Source: http://www.ledtronics.com/ds/smd-0603/Dstr0093.pdf + + + + + +SML10XXKH-TR (HIGH INTENSITY) LED + +SML10R3KH-TRULTRA RED +SML10E3KH-TRSUPER REDSUPER BLUE +SML10O3KH-TRSUPER ORANGE +SML10PY3KH-TRPURE YELLOW +SML10OY3KH-TRULTRA YELLOW +SML10AG3KH-TRAQUA GREEN +SML10BG3KH-TRBLUE GREEN +SML10PB1KH-TRSUPER BLUE +SML10CW1KH-TRWHITE + + +Source: http://www.ledtronics.com/ds/smd-1206/dstr0094.PDF + + + + + +SML0603-XXX (HIGH INTENSITY) LED + +AG3KAQUA GREEN +B1KSUPER BLUE +R1KSUPER RED +R3KULTRA RED +O3KSUPER ORANGE +O3KHSOFT ORANGE +Y3KHSUPER YELLOW +Y3KSUPER YELLOW +2CWWHITE + +Source: http://www.ledtronics.com/ds/smd-0603/Dstr0092.pdf + + + + + - - - - - - - - - - - - - - - - - - - - - - - -Date: ->LAST_DATE_TIME -Sheet: ->SHEET -REV: -TITLE: -Document Number: ->DRAWING_NAME + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + - -<b>FRAME</b> A Size , 8 1/2 x 11 INCH, Landscape<p> + +<b>LED</b><p> +<u>OSRAM</u>:<br> + +- <u>CHIPLED</u><br> +LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971 +LH N974, LH R974<br> +LS Q976, LO Q976, LY Q976<br> +LO Q996<br> + +- <u>Hyper CHIPLED</u><br> +LW Q18S<br> +LB Q993, LB Q99A, LB R99A<br> + +- <u>SideLED</u><br> +LS A670, LO A670, LY A670, LG A670, LP A670<br> +LB A673, LV A673, LT A673, LW A673<br> +LH A674<br> +LY A675<br> +LS A676, LA A676, LO A676, LY A676, LW A676<br> +LS A679, LY A679, LG A679<br> + +- <u>Hyper Micro SIDELED®</u><br> +LS Y876, LA Y876, LO Y876, LY Y876<br> +LT Y87S<br> + +- <u>SmartLED</u><br> +LW L88C, LW L88S<br> +LB L89C, LB L89S, LG L890<br> +LS L89K, LO L89K, LY L89K<br> +LS L896, LA L896, LO L896, LY L896<br> + +- <u>TOPLED</u><br> +LS T670, LO T670, LY T670, LG T670, LP T670<br> +LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br> +LG T671, LOG T671, LSG T671<br> +LB T673, LV T673, LT T673, LW T673<br> +LH T674<br> +LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br> +LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br> +LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br> +LW T67C<br> +LS T679, LY T679, LG T679<br> +LS T770, LO T770, LY T770, LG T770, LP T770<br> +LB T773, LV T773, LT T773, LW T773<br> +LH T774<br> +LS E675, LA E675, LY E675, LS T675<br> +LS T776, LA T776, LO T776, LY T776, LB T776<br> +LHGB T686<br> +LT T68C, LB T68C<br> + +- <u>Hyper Mini TOPLED®</u><br> +LB M676<br> + +- <u>Mini TOPLED Santana®</u><br> +LG M470<br> +LS M47K, LO M47K, LY M47K +<p> +Source: http://www.osram.convergy.de<p> + +<u>LUXEON:</u><br> +- <u>LUMILED®</u><br> +LXK2-PW12-R00, LXK2-PW12-S00, LXK2-PW14-U00, LXK2-PW14-V00<br> +LXK2-PM12-R00, LXK2-PM12-S00, LXK2-PM14-U00<br> +LXK2-PE12-Q00, LXK2-PE12-R00, LXK2-PE12-S00, LXK2-PE14-T00, LXK2-PE14-U00<br> +LXK2-PB12-K00, LXK2-PB12-L00, LXK2-PB12-M00, LXK2-PB14-N00, LXK2-PB14-P00, LXK2-PB14-Q00<br> +LXK2-PR12-L00, LXK2-PR12-M00, LXK2-PR14-Q00, LXK2-PR14-R00<br> +LXK2-PD12-Q00, LXK2-PD12-R00, LXK2-PD12-S00<br> +LXK2-PH12-R00, LXK2-PH12-S00<br> +LXK2-PL12-P00, LXK2-PL12-Q00, LXK2-PL12-R00 +<p> +Source: www.luxeon.com<p> + +<u>KINGBRIGHT:</U><p> +KA-3528ASYC<br> +Source: www.kingbright.com - - + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -16758,114 +21184,153 @@ BF959 corrected 2008.03.06<br> - + - - - + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -16874,25 +21339,25 @@ BF959 corrected 2008.03.06<br> - - + + - - + + - - - - + + + + @@ -16900,451 +21365,610 @@ BF959 corrected 2008.03.06<br> - + - - + + - + - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + - - - - + + + + + + + + + - - - - - - - - + + + + + + + - + - + - - - - - + + + + + - - + + - - + + - - - - - - - - - - - - - - - - - - + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + - + + + + + - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - + + - - + + - + - - + + - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + - - - - - - - - - - - + + - - + + - + - - - - - - - - + - - - - - - - - - - - - - - - - - - - + + + + + + + + + + - - - - - + + + + + + - - + + - - + + - - - - - + + + + - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -17352,4 +21976,21 @@ BF959 corrected 2008.03.06<br> + + +Since Version 8.2, EAGLE supports online libraries. The ids +of those online libraries will not be understood (or retained) +with this version. + + +Since Version 8.3, EAGLE supports URNs for individual library +assets (packages, symbols, and devices). The URNs of those assets +will not be understood (or retained) with this version. + + +Since Version 8.3, EAGLE supports the association of 3D packages +with devices in libraries, schematics, and board files. Those 3D +packages will not be understood (or retained) with this version. + +