mirror of
https://github.com/binary-kitchen/doorlockd
synced 2024-12-22 10:24:26 +01:00
Cleanup AVR project, add new empty stubs
Signed-off-by: Ralf Ramsauer <ralf@binary-kitchen.de>
This commit is contained in:
parent
af7b71304b
commit
bd63a57d31
@ -1,608 +1,42 @@
|
|||||||
# Hey Emacs, this is a -*- makefile -*-
|
# Doorlock AVR - The AVR part of doorlockd
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
|
|
||||||
#
|
#
|
||||||
# Released to the Public Domain
|
# Copyright (c) Binary Kitchen e.V., 2018
|
||||||
#
|
#
|
||||||
# Additional material for this makefile was written by:
|
# Authors:
|
||||||
# Peter Fleury
|
# Ralf Ramsauer <ralf@binary-kitchen.de>
|
||||||
# Tim Henigan
|
|
||||||
# Colin O'Flynn
|
|
||||||
# Reiner Patommel
|
|
||||||
# Markus Pfaff
|
|
||||||
# Sander Pool
|
|
||||||
# Frederik Rouleau
|
|
||||||
# Carlos Lamas
|
|
||||||
#
|
#
|
||||||
#----------------------------------------------------------------------------
|
# This work is licensed under the terms of the GNU GPL, version 2. See
|
||||||
# On command line:
|
# the COPYING file in the top-level directory.
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device, using avrdude.
|
|
||||||
# Please customize the avrdude settings below first!
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name
|
TARGET = doorlock
|
||||||
MCU = attiny2313
|
|
||||||
|
|
||||||
|
MCU ?= attiny2313a
|
||||||
|
F_OSC ?= 4000000
|
||||||
|
UART_BAUD ?= 9600
|
||||||
|
AVRDUDE_MCU ?= t2313
|
||||||
|
|
||||||
# Processor frequency.
|
OBJS = main.o uart.o
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
# Typical values are:
|
|
||||||
# F_CPU = 1000000
|
|
||||||
# F_CPU = 1843200
|
|
||||||
# F_CPU = 2000000
|
|
||||||
# F_CPU = 3686400
|
|
||||||
# F_CPU = 4000000
|
|
||||||
# F_CPU = 7372800
|
|
||||||
# F_CPU = 8000000
|
|
||||||
# F_CPU = 11059200
|
|
||||||
# F_CPU = 14745600
|
|
||||||
# F_CPU = 16000000
|
|
||||||
# F_CPU = 18432000
|
|
||||||
# F_CPU = 20000000
|
|
||||||
|
|
||||||
F_CPU = 14745600
|
|
||||||
#F_CPU = 8000000
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary)
|
|
||||||
FORMAT = ihex
|
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension).
|
|
||||||
TARGET = main
|
|
||||||
|
|
||||||
|
|
||||||
# Object files directory
|
|
||||||
OBJDIR = obj
|
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.)
|
|
||||||
SRC = main.c uart.c
|
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.)
|
|
||||||
CPPSRC =
|
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here.
|
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s
|
|
||||||
# will not be considered source files but generated files (assembler
|
|
||||||
# output from the compiler), and will be deleted upon "make clean"!
|
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does
|
|
||||||
# care about how the name is spelled on its command-line.
|
|
||||||
ASRC =
|
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s].
|
|
||||||
# 0 = turn off optimization. s = optimize for size.
|
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
|
||||||
OPT = s
|
|
||||||
|
|
||||||
|
|
||||||
# Debugging format.
|
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
|
||||||
# AVR Studio 4.10 requires dwarf-2.
|
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
|
||||||
DEBUG =
|
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here.
|
|
||||||
# Each directory must be seperated by a space.
|
|
||||||
# Use forward slashes for directory separators.
|
|
||||||
# For a directory that has spaces, enclose it in quotes.
|
|
||||||
EXTRAINCDIRS =
|
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level.
|
|
||||||
# c89 = "ANSI" C
|
|
||||||
# gnu89 = c89 plus GCC extensions
|
|
||||||
# c99 = ISO C99 standard (not yet fully implemented)
|
|
||||||
# gnu99 = c99 plus GCC extensions
|
|
||||||
CSTANDARD = -std=c11
|
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources
|
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL
|
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources
|
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
|
||||||
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
|
||||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ----------------
|
|
||||||
# -g*: generate debugging information
|
|
||||||
# -O*: optimization level
|
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
||||||
# -Wall...: warning level
|
|
||||||
# -Wa,...: tell GCC to pass this to the assembler.
|
|
||||||
# -adhlns...: create assembler listing
|
|
||||||
CFLAGS = -g$(DEBUG)
|
|
||||||
CFLAGS += $(CDEFS)
|
|
||||||
CFLAGS += -O$(OPT)
|
|
||||||
#CFLAGS += -mint8
|
|
||||||
#CFLAGS += -mshort-calls
|
|
||||||
CFLAGS += -funsigned-char
|
|
||||||
CFLAGS += -funsigned-bitfields
|
|
||||||
CFLAGS += -fpack-struct
|
|
||||||
CFLAGS += -fshort-enums
|
|
||||||
#CFLAGS += -fno-unit-at-a-time
|
|
||||||
CFLAGS += -Wall
|
|
||||||
CFLAGS += -Wstrict-prototypes
|
|
||||||
CFLAGS += -Wundef
|
|
||||||
#CFLAGS += -Wunreachable-code
|
|
||||||
#CFLAGS += -Wsign-compare
|
|
||||||
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
|
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
||||||
CFLAGS += $(CSTANDARD)
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ----------------
|
|
||||||
# -g*: generate debugging information
|
|
||||||
# -O*: optimization level
|
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
||||||
# -Wall...: warning level
|
|
||||||
# -Wa,...: tell GCC to pass this to the assembler.
|
|
||||||
# -adhlns...: create assembler listing
|
|
||||||
CPPFLAGS = -g$(DEBUG)
|
|
||||||
CPPFLAGS += $(CPPDEFS)
|
|
||||||
CPPFLAGS += -O$(OPT)
|
|
||||||
#CPPFLAGS += -mint8
|
|
||||||
#CPPFLAGS += -mshort-calls
|
|
||||||
CPPFLAGS += -funsigned-char
|
|
||||||
CPPFLAGS += -funsigned-bitfields
|
|
||||||
CPPFLAGS += -fpack-struct
|
|
||||||
CPPFLAGS += -fshort-enums
|
|
||||||
CPPFLAGS += -fno-exceptions
|
|
||||||
#CPPFLAGS += -fno-unit-at-a-time
|
|
||||||
CPPFLAGS += -Wall
|
|
||||||
#CPPFLAGS += -Wstrict-prototypes
|
|
||||||
CFLAGS += -Wundef
|
|
||||||
#CPPFLAGS += -Wunreachable-code
|
|
||||||
#CPPFLAGS += -Wsign-compare
|
|
||||||
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
|
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
||||||
#CPPFLAGS += $(CSTANDARD)
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ----------------
|
|
||||||
# -Wa,...: tell GCC to pass this to the assembler.
|
|
||||||
# -ahlms: create listing
|
|
||||||
# -gstabs: have the assembler create line number information; note that
|
|
||||||
# for use in COFF files, additional information about filenames
|
|
||||||
# and function names needs to be present in the assembler source
|
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there]
|
|
||||||
ASFLAGS = -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ----------------
|
|
||||||
# Minimalistic printf version
|
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below)
|
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version.
|
|
||||||
PRINTF_LIB =
|
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version
|
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version.
|
|
||||||
SCANF_LIB =
|
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN)
|
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ----------------
|
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
||||||
# used for variables (.data/.bss) and heap (malloc()).
|
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
||||||
# only used for heap (malloc()).
|
|
||||||
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
|
|
||||||
|
|
||||||
EXTMEMOPTS =
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ----------------
|
|
||||||
# -Wl,...: tell GCC to pass this to linker.
|
|
||||||
# -Map: create map file
|
|
||||||
# --cref: add cross reference to map file
|
|
||||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
|
||||||
LDFLAGS += $(EXTMEMOPTS)
|
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
|
||||||
#LDFLAGS += -T linker_script.x
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ----------------
|
|
||||||
|
|
||||||
# Programming hardware: alf avr910 avrisp bascom bsd
|
|
||||||
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
|
|
||||||
#
|
|
||||||
# Type: avrdude -c ?
|
|
||||||
# to get a full listing.
|
|
||||||
#
|
|
||||||
AVRDUDE_PROGRAMMER = avr910
|
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port.
|
|
||||||
AVRDUDE_PORT = /dev/ttyUSB0 # programmer connected to serial device
|
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter.
|
|
||||||
# Note that this counter needs to be initialized first using -Yn,
|
|
||||||
# see avrdude manual.
|
|
||||||
#AVRDUDE_ERASE_COUNTER = -y
|
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be
|
|
||||||
# performed after programming the device.
|
|
||||||
#AVRDUDE_NO_VERIFY = -V
|
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug
|
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
|
||||||
# to submit bug reports.
|
|
||||||
#AVRDUDE_VERBOSE = -v -v
|
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ----------------
|
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency.
|
|
||||||
DEBUG_MFREQ = $(F_CPU)
|
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight.
|
|
||||||
# DEBUG_UI = gdb
|
|
||||||
DEBUG_UI = insight
|
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr.
|
|
||||||
DEBUG_BACKEND = avarice
|
|
||||||
#DEBUG_BACKEND = simulavr
|
|
||||||
|
|
||||||
# GDB Init Filename.
|
|
||||||
GDBINIT_FILE = __avr_gdbinit
|
|
||||||
|
|
||||||
# When using avarice settings for the JTAG
|
|
||||||
JTAG_DEV = /dev/com1
|
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr.
|
|
||||||
DEBUG_PORT = 4242
|
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
|
||||||
# just set to localhost unless doing some sort of crazy debugging when
|
|
||||||
# avarice is running on a different computer.
|
|
||||||
DEBUG_HOST = localhost
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================
|
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands.
|
|
||||||
SHELL = sh
|
|
||||||
CC = avr-gcc
|
CC = avr-gcc
|
||||||
OBJCOPY = avr-objcopy
|
OBJCOPY = avr-objcopy
|
||||||
OBJDUMP = avr-objdump
|
|
||||||
SIZE = avr-size
|
|
||||||
NM = avr-nm
|
|
||||||
AVRDUDE = avrdude
|
AVRDUDE = avrdude
|
||||||
REMOVE = rm -f
|
|
||||||
REMOVEDIR = rm -rf
|
|
||||||
COPY = cp
|
|
||||||
WINSHELL = cmd
|
|
||||||
|
|
||||||
|
CFLAGS := -g -O2 -mmcu=$(MCU)
|
||||||
|
CFLAGS += -Wall -Wextra -Wstrict-prototypes
|
||||||
|
CFLAGS += -DF_OSC=$(F_OSC) -DF_CPU=F_OSC -DUART_BAUD=$(UART_BAUD)UL -DMCU=$(MCU)
|
||||||
|
|
||||||
# Define Messages
|
all: $(TARGET).hex
|
||||||
# English
|
|
||||||
MSG_ERRORS_NONE = Errors: none
|
|
||||||
MSG_BEGIN = -------- begin --------
|
|
||||||
MSG_END = -------- end --------
|
|
||||||
MSG_SIZE_BEFORE = Size before:
|
|
||||||
MSG_SIZE_AFTER = Size after:
|
|
||||||
MSG_COFF = Converting to AVR COFF:
|
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
|
||||||
MSG_FLASH = Creating load file for Flash:
|
|
||||||
MSG_EEPROM = Creating load file for EEPROM:
|
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
|
||||||
MSG_LINKING = Linking:
|
|
||||||
MSG_COMPILING = Compiling C:
|
|
||||||
MSG_COMPILING_CPP = Compiling C++:
|
|
||||||
MSG_ASSEMBLING = Assembling:
|
|
||||||
MSG_CLEANING = Cleaning project:
|
|
||||||
MSG_CREATING_LIBRARY = Creating library:
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files.
|
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
|
||||||
|
|
||||||
# Define all listing files.
|
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files.
|
|
||||||
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
|
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags.
|
|
||||||
# Add target processor to flags.
|
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
|
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target.
|
|
||||||
all: begin gccversion sizebefore build sizeafter end
|
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library.
|
|
||||||
build: elf hex eep lss sym
|
|
||||||
#build: lib
|
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf
|
|
||||||
hex: $(TARGET).hex
|
|
||||||
eep: $(TARGET).eep
|
|
||||||
lss: $(TARGET).lss
|
|
||||||
sym: $(TARGET).sym
|
|
||||||
LIBNAME=lib$(TARGET).a
|
|
||||||
lib: $(LIBNAME)
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy.
|
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on
|
|
||||||
# the following magic strings to be generated by the compile job.
|
|
||||||
begin:
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_BEGIN)
|
|
||||||
|
|
||||||
end:
|
|
||||||
@echo $(MSG_END)
|
|
||||||
@echo
|
|
||||||
|
|
||||||
|
|
||||||
# Display size of file.
|
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
|
||||||
ELFSIZE = $(SIZE) -A $(TARGET).elf
|
|
||||||
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
|
|
||||||
|
|
||||||
sizebefore:
|
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
|
|
||||||
$(AVRMEM) 2>/dev/null; echo; fi
|
|
||||||
|
|
||||||
sizeafter:
|
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
|
|
||||||
$(AVRMEM) 2>/dev/null; echo; fi
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information.
|
|
||||||
gccversion :
|
|
||||||
@$(CC) --version
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Program the device.
|
|
||||||
program: $(TARGET).hex $(TARGET).eep
|
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following:
|
|
||||||
# define the reset signal, load the target file, connect to target, and set
|
|
||||||
# a breakpoint at main().
|
|
||||||
gdb-config:
|
|
||||||
@$(REMOVE) $(GDBINIT_FILE)
|
|
||||||
@echo define reset >> $(GDBINIT_FILE)
|
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
|
||||||
@echo end >> $(GDBINIT_FILE)
|
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
|
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr)
|
|
||||||
@echo load >> $(GDBINIT_FILE)
|
|
||||||
endif
|
|
||||||
@echo break main >> $(GDBINIT_FILE)
|
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf
|
|
||||||
ifeq ($(DEBUG_BACKEND), avarice)
|
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
|
||||||
@$(WINSHELL) /c pause
|
|
||||||
|
|
||||||
else
|
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
|
||||||
endif
|
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging
|
|
||||||
COFFCONVERT += --change-section-address .data-0x800000
|
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000
|
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000
|
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_COFF) $(TARGET).cof
|
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
|
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
|
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file.
|
|
||||||
%.hex: %.elf
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_FLASH) $@
|
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
|
||||||
|
|
||||||
%.eep: %.elf
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_EEPROM) $@
|
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
|
||||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
|
||||||
|
|
||||||
# Create extended listing file from ELF output file.
|
|
||||||
%.lss: %.elf
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@
|
|
||||||
$(OBJDUMP) -h -S $< > $@
|
|
||||||
|
|
||||||
# Create a symbol table from ELF output file.
|
|
||||||
%.sym: %.elf
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@
|
|
||||||
$(NM) -n $< > $@
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files.
|
|
||||||
.SECONDARY : $(TARGET).a
|
|
||||||
.PRECIOUS : $(OBJ)
|
|
||||||
%.a: $(OBJ)
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@
|
|
||||||
$(AR) $@ $(OBJ)
|
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files.
|
|
||||||
.SECONDARY : $(TARGET).elf
|
|
||||||
.PRECIOUS : $(OBJ)
|
|
||||||
%.elf: $(OBJ)
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_LINKING) $@
|
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
|
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files.
|
|
||||||
$(OBJDIR)/%.o : %.c
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_COMPILING) $<
|
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files.
|
|
||||||
$(OBJDIR)/%.o : %.cpp
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_COMPILING_CPP) $<
|
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files.
|
|
||||||
%.s : %.c
|
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files.
|
|
||||||
%.s : %.cpp
|
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
|
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files.
|
|
||||||
$(OBJDIR)/%.o : %.S
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_ASSEMBLING) $<
|
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report.
|
|
||||||
%.i : %.c
|
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project.
|
|
||||||
clean: begin clean_list end
|
|
||||||
|
|
||||||
clean_list :
|
|
||||||
@echo
|
|
||||||
@echo $(MSG_CLEANING)
|
|
||||||
$(REMOVE) $(TARGET).hex
|
|
||||||
$(REMOVE) $(TARGET).eep
|
|
||||||
$(REMOVE) $(TARGET).cof
|
|
||||||
$(REMOVE) $(TARGET).elf
|
|
||||||
$(REMOVE) $(TARGET).map
|
|
||||||
$(REMOVE) $(TARGET).sym
|
|
||||||
$(REMOVE) $(TARGET).lss
|
|
||||||
$(REMOVEDIR) $(OBJDIR)
|
|
||||||
$(REMOVE) $(SRC:.c=.s)
|
|
||||||
$(REMOVE) $(SRC:.c=.d)
|
|
||||||
$(REMOVEDIR) .dep
|
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory
|
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files.
|
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets.
|
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
|
||||||
build elf hex eep lss sym coff extcoff \
|
|
||||||
clean clean_list program debug gdb-config
|
|
||||||
|
|
||||||
|
$(TARGET).elf: $(OBJS)
|
||||||
|
$(CC) $(CFLAGS) -o $(TARGET).elf $^
|
||||||
|
|
||||||
|
$(TARGET).hex: $(TARGET).elf
|
||||||
|
$(OBJCOPY) -O ihex -R .eeprom $^ $@
|
||||||
|
|
||||||
|
program: $(TARGET).hex
|
||||||
|
$(AVRDUDE) -p $(AVRDUDE_MCU) -P usb -c avrispmkII -U flash:w:$^
|
||||||
|
|
||||||
|
clean:
|
||||||
|
rm -f $(OBJS)
|
||||||
|
rm -f $(TARGET).elf $(TARGET).hex
|
||||||
|
|||||||
106
avr-code/io.h
106
avr-code/io.h
@ -1,106 +0,0 @@
|
|||||||
#ifndef IO_H
|
|
||||||
#define IO_H
|
|
||||||
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include <avr/io.h>
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Macros
|
|
||||||
*/
|
|
||||||
#define PIN(x) (*(&x - 2)) // Address Of Data Direction Register Of Port x
|
|
||||||
#define DDR(x) (*(&x - 1)) // Address Of Input Register Of Port x
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Outputs
|
|
||||||
*/
|
|
||||||
#define PORT_BOLZEN PORTB
|
|
||||||
#define PIN_BOLZEN PB0
|
|
||||||
|
|
||||||
#define PORT_SCHNAPPER PORTB
|
|
||||||
#define PIN_SCHNAPPER PB1
|
|
||||||
|
|
||||||
#define PORT_STATUS PORTB
|
|
||||||
#define PIN_STATUS PB2
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Inputs
|
|
||||||
*/
|
|
||||||
#define PORT_BUTTON_LOCK PORTD
|
|
||||||
#define PIN_BUTTON_LOCK PD2
|
|
||||||
|
|
||||||
#define PORT_BUTTON_UNLOCK PORTD
|
|
||||||
#define PIN_BUTTON_UNLOCK PD3
|
|
||||||
|
|
||||||
#define PORT_EMERGENCY_UNLOCK PORTD
|
|
||||||
#define PIN_EMERGENCY_UNLOCK PD4
|
|
||||||
|
|
||||||
static inline bool is_emergency_unlock(void)
|
|
||||||
{
|
|
||||||
return !(PIN(PORT_EMERGENCY_UNLOCK) & (1<<PIN_EMERGENCY_UNLOCK));
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline bool is_button_unlock(void)
|
|
||||||
{
|
|
||||||
return !(PIN(PORT_BUTTON_UNLOCK) & (1<<PIN_BUTTON_UNLOCK));
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline bool is_button_lock(void)
|
|
||||||
{
|
|
||||||
return !(PIN(PORT_BUTTON_LOCK) & (1<<PIN_BUTTON_LOCK));
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
static inline void schnapper_off(void)
|
|
||||||
{
|
|
||||||
PORT_SCHNAPPER &= ~(1<<PIN_SCHNAPPER);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void schnapper_on(void)
|
|
||||||
{
|
|
||||||
PORT_SCHNAPPER |= (1<<PIN_SCHNAPPER);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void bolzen_off(void)
|
|
||||||
{
|
|
||||||
PORT_BOLZEN &= ~(1<<PIN_BOLZEN);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void bolzen_on(void)
|
|
||||||
{
|
|
||||||
PORT_BOLZEN |= (1<<PIN_BOLZEN);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void status_off(void)
|
|
||||||
{
|
|
||||||
PORT_STATUS &= ~(1<<PIN_STATUS);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void status_on(void)
|
|
||||||
{
|
|
||||||
PORT_STATUS |= (1<<PIN_STATUS);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void io_init(void)
|
|
||||||
{
|
|
||||||
// Set output directions
|
|
||||||
DDR(PORT_SCHNAPPER) |= (1<<PIN_SCHNAPPER);
|
|
||||||
schnapper_off();
|
|
||||||
|
|
||||||
DDR(PORT_SCHNAPPER) |= (1<<PIN_BOLZEN);
|
|
||||||
bolzen_off();
|
|
||||||
|
|
||||||
DDR(PORT_STATUS) |= (1<<PIN_STATUS);
|
|
||||||
status_off();
|
|
||||||
|
|
||||||
// Set input directions and activate pull-ups
|
|
||||||
DDR(PORT_BUTTON_UNLOCK) &= ~(1<<PIN_BUTTON_UNLOCK);
|
|
||||||
PORT_BUTTON_UNLOCK |= (1<<PIN_BUTTON_UNLOCK);
|
|
||||||
|
|
||||||
DDR(PORT_BUTTON_LOCK) &= ~(1<<PIN_BUTTON_LOCK);
|
|
||||||
PORT_BUTTON_LOCK |= (1<<PIN_BUTTON_LOCK);
|
|
||||||
|
|
||||||
DDR(PORT_EMERGENCY_UNLOCK) &= ~(1<<PIN_EMERGENCY_UNLOCK);
|
|
||||||
PORT_EMERGENCY_UNLOCK |= (1<<PIN_EMERGENCY_UNLOCK);
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif
|
|
||||||
271
avr-code/main.c
271
avr-code/main.c
@ -1,30 +1,43 @@
|
|||||||
/* 2015, Ralf Ramsauer
|
/*
|
||||||
* ralf@binary-kitchen.de
|
* doorlock-avr, AVR code of Binary Kitchen's doorlock
|
||||||
|
*
|
||||||
|
* Copyright (c) Binary Kitchen, 2018
|
||||||
|
*
|
||||||
|
* Authors:
|
||||||
|
* Ralf Ramsauer <ralf@binary-kitchen.de>
|
||||||
|
*
|
||||||
|
* This work is licensed under the terms of the GNU GPL, version 2. See
|
||||||
|
* the COPYING file in the top-level directory.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <stdbool.h>
|
#include "uart.h"
|
||||||
|
|
||||||
|
#include <stdbool.h>
|
||||||
#include <avr/io.h>
|
#include <avr/io.h>
|
||||||
#include <avr/interrupt.h>
|
#include <avr/interrupt.h>
|
||||||
#include <util/delay.h>
|
#include <util/delay.h>
|
||||||
|
|
||||||
#include "io.h"
|
#define RED 0x1
|
||||||
#include "uart.h"
|
#define GREEN 0x2
|
||||||
|
#define YELLOW 0x4
|
||||||
|
|
||||||
#include "../doorcmds.h"
|
#define SET_CONDITIONAL(predicate, port, pin) \
|
||||||
|
if ((predicate)) \
|
||||||
|
port |= (1 << pin); \
|
||||||
|
else \
|
||||||
|
port &= ~(1 << pin);
|
||||||
|
|
||||||
static volatile enum {LOCKED, UNLOCKED} state = LOCKED;
|
/* can either be red, green, or yellow */
|
||||||
static volatile bool schnapper = false;
|
static unsigned char state;
|
||||||
|
|
||||||
static inline void timer_init(void)
|
static inline void set_schnapper(bool state)
|
||||||
{
|
{
|
||||||
// Config the timer
|
SET_CONDITIONAL(state, PORTB, PB0);
|
||||||
// The 16bit Timer1 is used for resetting the lock state,
|
}
|
||||||
// if the UART stops receiving the unlock command
|
|
||||||
TIMSK |= (1<<TOIE1);
|
static inline void set_bolzen(bool state)
|
||||||
TIFR |= (1<<TOV1);
|
{
|
||||||
TCCR1A = 0;
|
SET_CONDITIONAL(state, PORTB, PB1);
|
||||||
TCCR1B = (1<<CS12);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static inline void reset_timeout(void)
|
static inline void reset_timeout(void)
|
||||||
@ -32,155 +45,159 @@ static inline void reset_timeout(void)
|
|||||||
TCNT1 = 0;
|
TCNT1 = 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
static inline void extint_init(void)
|
static void set_leds(void)
|
||||||
{
|
{
|
||||||
// Configure external interrupts
|
static unsigned int counter = 0;
|
||||||
// External interrupts are used for Button Unlock an Lock
|
bool pwm_cycle = ++counter % 20;
|
||||||
MCUCR = (1<<ISC11)|(1<<ISC01);
|
|
||||||
GIMSK |= (1<<INT0)|(1<<INT1);
|
if (pwm_cycle) {
|
||||||
|
PORTD &= ~((1 << PD5) | (1 << PD6));
|
||||||
|
PORTB &= ~(1 << PB4);
|
||||||
}
|
}
|
||||||
|
|
||||||
void uart_handler(const unsigned char c)
|
switch (state) {
|
||||||
|
case RED:
|
||||||
|
PORTD |= (1 << PD5);
|
||||||
|
break;
|
||||||
|
case YELLOW:
|
||||||
|
PORTD |= (1 << PD6);
|
||||||
|
break;
|
||||||
|
case GREEN:
|
||||||
|
PORTB |= (1 << PB4);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (pwm_cycle)
|
||||||
|
return;
|
||||||
|
|
||||||
|
switch (state) {
|
||||||
|
case RED:
|
||||||
|
PORTD ^= (1 << PD6);
|
||||||
|
PORTB ^= (1 << PB4);
|
||||||
|
break;
|
||||||
|
case YELLOW:
|
||||||
|
PORTD ^= (1 << PD5);
|
||||||
|
PORTB ^= (1 << PB4);
|
||||||
|
break;
|
||||||
|
case GREEN:
|
||||||
|
PORTD ^= (1 << PD5);
|
||||||
|
PORTD ^= (1 << PD6);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void update_state(unsigned char new_state)
|
||||||
{
|
{
|
||||||
char retval = c;
|
|
||||||
switch ((char)c) {
|
|
||||||
case DOOR_CMD_UNLOCK:
|
|
||||||
state = UNLOCKED;
|
|
||||||
reset_timeout();
|
reset_timeout();
|
||||||
break;
|
|
||||||
|
|
||||||
case DOOR_CMD_LOCK:
|
if (new_state == state)
|
||||||
state = LOCKED;
|
return;
|
||||||
break;
|
|
||||||
|
|
||||||
case DOOR_CMD_PING:
|
state = new_state;
|
||||||
|
switch (state) {
|
||||||
|
case RED:
|
||||||
|
set_bolzen(false);
|
||||||
|
set_schnapper(false);
|
||||||
|
uart_putc('r');
|
||||||
break;
|
break;
|
||||||
|
case YELLOW:
|
||||||
case DOOR_CMD_SCHNAPER:
|
set_bolzen(true);
|
||||||
if (state == UNLOCKED)
|
set_schnapper(false);
|
||||||
schnapper = true;
|
uart_putc('y');
|
||||||
else
|
|
||||||
retval = '?';
|
|
||||||
break;
|
break;
|
||||||
|
case GREEN:
|
||||||
case DOOR_CMD_STATUS:
|
set_bolzen(true);
|
||||||
retval = (state == LOCKED) ? 'l' : 'u';
|
set_schnapper(true);
|
||||||
|
uart_putc('g');
|
||||||
break;
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
ISR(USART_RX_vect)
|
||||||
|
{
|
||||||
|
unsigned char c = UDR;
|
||||||
|
bool respond = true;
|
||||||
|
|
||||||
|
switch (c) {
|
||||||
|
case 'r':
|
||||||
|
update_state(RED);
|
||||||
|
break;
|
||||||
|
case 'y':
|
||||||
|
update_state(YELLOW);
|
||||||
|
break;
|
||||||
|
case 'g':
|
||||||
|
update_state(GREEN);
|
||||||
|
break;
|
||||||
default:
|
default:
|
||||||
retval = '?';
|
respond = false;
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
|
|
||||||
uart_putc(retval);
|
if (respond)
|
||||||
|
uart_putc(c);
|
||||||
}
|
}
|
||||||
|
|
||||||
// Timeroverflow interrupts occurs each 1.137 seconds
|
|
||||||
// UART receive interrupts is used to prevent timer overflows
|
|
||||||
ISR(TIMER1_OVF_vect)
|
ISR(TIMER1_OVF_vect)
|
||||||
{
|
{
|
||||||
state = LOCKED;
|
reset_timeout();
|
||||||
|
update_state(RED);
|
||||||
}
|
}
|
||||||
|
|
||||||
// Button Lock
|
static inline void timer_init(void)
|
||||||
ISR(INT0_vect)
|
|
||||||
{
|
{
|
||||||
cli();
|
TIMSK |= (1 << TOIE1);
|
||||||
|
TIFR |= (1 << TOV1);
|
||||||
// This code is used to prevent spurious interrupts
|
TCCR1A = 0;
|
||||||
_delay_ms(50);
|
TCCR1B = (1 << CS12);
|
||||||
if (!is_button_lock())
|
|
||||||
goto out;
|
|
||||||
|
|
||||||
uart_putc(DOOR_BUTTON_LOCK);
|
|
||||||
state = LOCKED;
|
|
||||||
|
|
||||||
out:
|
|
||||||
sei();
|
|
||||||
}
|
}
|
||||||
|
|
||||||
// Button Unlock
|
static inline void setup_ports(void)
|
||||||
ISR(INT1_vect)
|
|
||||||
{
|
{
|
||||||
cli();
|
PORTB = 0;
|
||||||
|
DDRB = (1 << PB4) | (1 << PB1) | (1 << PB0);
|
||||||
|
|
||||||
// This code is used to prevent spurious interrupts
|
PORTD = 0;
|
||||||
_delay_ms(50);
|
DDRD = (1 << PD5) | (1 << PD6);
|
||||||
if (!is_button_unlock())
|
|
||||||
goto out;
|
|
||||||
|
|
||||||
uart_putc(DOOR_BUTTON_UNLOCK);
|
|
||||||
|
|
||||||
if (state == LOCKED) {
|
|
||||||
bolzen_off();
|
|
||||||
_delay_ms(3000);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
out:
|
static unsigned char get_keys(void)
|
||||||
sei();
|
{
|
||||||
|
unsigned char ret = 0;
|
||||||
|
|
||||||
|
if (!(PIND & (1 << PD2))) ret |= RED;
|
||||||
|
if (!(PIND & (1 << PD3))) ret |= YELLOW;
|
||||||
|
if (!(PIND & (1 << PD4))) ret |= GREEN;
|
||||||
|
|
||||||
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
int main(void)
|
int main(void)
|
||||||
{
|
{
|
||||||
// Disable all interrupts
|
unsigned char i;
|
||||||
cli();
|
|
||||||
// Init IO
|
|
||||||
io_init();
|
|
||||||
|
|
||||||
// Wait a bit to settle down
|
setup_ports();
|
||||||
_delay_ms(1000);
|
|
||||||
|
|
||||||
// Init Uart
|
|
||||||
uart_init();
|
|
||||||
uart_set_recv_handler(uart_handler);
|
|
||||||
|
|
||||||
// Init Timer
|
|
||||||
timer_init();
|
timer_init();
|
||||||
|
uart_init();
|
||||||
|
|
||||||
|
update_state(RED);
|
||||||
reset_timeout();
|
reset_timeout();
|
||||||
|
|
||||||
// Init external interrupts
|
|
||||||
extint_init();
|
|
||||||
|
|
||||||
// Enable all interrupts
|
|
||||||
sei();
|
sei();
|
||||||
|
|
||||||
for (;;) {
|
for (;;) {
|
||||||
if (state == LOCKED) {
|
i = get_keys();
|
||||||
bolzen_on();
|
if (i & GREEN) {
|
||||||
status_off();
|
uart_putc('G');
|
||||||
schnapper = false;
|
update_state(GREEN);
|
||||||
|
} else if (i & YELLOW) {
|
||||||
// Check if someone used the emergency unlock
|
uart_putc('Y');
|
||||||
if (is_emergency_unlock()) {
|
update_state(YELLOW);
|
||||||
|
} else if (i & RED) {
|
||||||
// If so, wait 200ms and double check
|
uart_putc('R');
|
||||||
_delay_ms(200);
|
update_state(RED);
|
||||||
if (is_emergency_unlock()) {
|
}
|
||||||
uart_putc(DOOR_EMERGENCY_UNLOCK);
|
while (get_keys())
|
||||||
cli();
|
reset_timeout();
|
||||||
|
set_leds();
|
||||||
bolzen_off();
|
|
||||||
schnapper_on();
|
|
||||||
|
|
||||||
_delay_ms(3000);
|
|
||||||
|
|
||||||
schnapper_off();
|
|
||||||
bolzen_on();
|
|
||||||
|
|
||||||
sei();
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
} else if (state == UNLOCKED) {
|
|
||||||
bolzen_off();
|
|
||||||
status_on();
|
|
||||||
if (schnapper == true) {
|
|
||||||
schnapper = false;
|
|
||||||
schnapper_on();
|
|
||||||
_delay_ms(2000);
|
|
||||||
schnapper_off();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|||||||
@ -1,27 +1,32 @@
|
|||||||
|
/*
|
||||||
|
* doorlock-avr, AVR code of Binary Kitchen's doorlock
|
||||||
|
*
|
||||||
|
* Copyright (c) Binary Kitchen, 2018
|
||||||
|
*
|
||||||
|
* Authors:
|
||||||
|
* Ralf Ramsauer <ralf@binary-kitchen.de>
|
||||||
|
*
|
||||||
|
* This work is licensed under the terms of the GNU GPL, version 2. See
|
||||||
|
* the COPYING file in the top-level directory.
|
||||||
|
*/
|
||||||
|
|
||||||
#include <stddef.h>
|
#include <stddef.h>
|
||||||
#include <avr/interrupt.h>
|
#include <avr/interrupt.h>
|
||||||
#include <avr/io.h>
|
#include <avr/io.h>
|
||||||
|
|
||||||
#include "uart.h"
|
#include "uart.h"
|
||||||
|
|
||||||
#define UBRR_VAL ((F_CPU+BAUD*8)/(BAUD*16)-1)
|
#define UBRR_VAL ((F_OSC+UART_BAUD*8)/(UART_BAUD*16)-1)
|
||||||
#define BAUD_REAL (F_CPU/(16*(UBRR_VAL+1)))
|
#define BAUD_REAL (F_OSC/(16*(UBRR_VAL+1)))
|
||||||
#define BAUD_ERROR ((BAUD_REAL*1000)/BAUD)
|
#define BAUD_ERROR ((BAUD_REAL*1000)/UART_BAUD)
|
||||||
|
|
||||||
#if ((BAUD_ERROR<990) || (BAUD_ERROR>1010))
|
#if ((BAUD_ERROR<985) || (BAUD_ERROR>1010))
|
||||||
|
#warn BAUD_ERROR
|
||||||
#error Choose another crystal. Baud error too high.
|
#error Choose another crystal. Baud error too high.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
static void (*recv_handler)(unsigned char c) = NULL;
|
static void (*recv_handler)(unsigned char c) = NULL;
|
||||||
|
|
||||||
ISR(USART_RX_vect)
|
|
||||||
{
|
|
||||||
cli();
|
|
||||||
if(recv_handler)
|
|
||||||
recv_handler(UDR);
|
|
||||||
sei();
|
|
||||||
}
|
|
||||||
|
|
||||||
void uart_init()
|
void uart_init()
|
||||||
{
|
{
|
||||||
// Enable receive and transmit
|
// Enable receive and transmit
|
||||||
|
|||||||
@ -1,7 +1,14 @@
|
|||||||
#ifndef UART_H
|
/*
|
||||||
#define UART_H
|
* doorlock-avr, AVR code of Binary Kitchen's doorlock
|
||||||
|
*
|
||||||
#define BAUD 9600UL
|
* Copyright (c) Binary Kitchen, 2018
|
||||||
|
*
|
||||||
|
* Authors:
|
||||||
|
* Ralf Ramsauer <ralf@binary-kitchen.de>
|
||||||
|
*
|
||||||
|
* This work is licensed under the terms of the GNU GPL, version 2. See
|
||||||
|
* the COPYING file in the top-level directory.
|
||||||
|
*/
|
||||||
|
|
||||||
void uart_set_recv_handler(void (*handler)(unsigned char c));
|
void uart_set_recv_handler(void (*handler)(unsigned char c));
|
||||||
|
|
||||||
@ -9,5 +16,3 @@ void uart_init(void);
|
|||||||
|
|
||||||
void uart_putc(const char c);
|
void uart_putc(const char c);
|
||||||
void uart_puts(const char* str);
|
void uart_puts(const char* str);
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user