718 lines
36 KiB
C
718 lines
36 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_sd.h
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief Header file of SD HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_HAL_SD_H
|
|
#define __STM32F1xx_HAL_SD_H
|
|
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_ll_sdmmc.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SD SD
|
|
* @brief SD HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup SD_Exported_Types SD Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure
|
|
* @{
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_SD_STATE_RESET = 0x00000000U, /*!< SD not yet initialized or disabled */
|
|
HAL_SD_STATE_READY = 0x00000001U, /*!< SD initialized and ready for use */
|
|
HAL_SD_STATE_TIMEOUT = 0x00000002U, /*!< SD Timeout state */
|
|
HAL_SD_STATE_BUSY = 0x00000003U, /*!< SD process ongoing */
|
|
HAL_SD_STATE_PROGRAMMING = 0x00000004U, /*!< SD Programming State */
|
|
HAL_SD_STATE_RECEIVING = 0x00000005U, /*!< SD Receinving State */
|
|
HAL_SD_STATE_TRANSFER = 0x00000006U, /*!< SD Transfert State */
|
|
HAL_SD_STATE_ERROR = 0x0000000FU /*!< SD is in error state */
|
|
}HAL_SD_StateTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure
|
|
* @{
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_SD_CARD_READY = 0x00000001U, /*!< Card state is ready */
|
|
HAL_SD_CARD_IDENTIFICATION = 0x00000002U, /*!< Card is in identification state */
|
|
HAL_SD_CARD_STANDBY = 0x00000003U, /*!< Card is in standby state */
|
|
HAL_SD_CARD_TRANSFER = 0x00000004U, /*!< Card is in transfer state */
|
|
HAL_SD_CARD_SENDING = 0x00000005U, /*!< Card is sending an operation */
|
|
HAL_SD_CARD_RECEIVING = 0x00000006U, /*!< Card is receiving operation information */
|
|
HAL_SD_CARD_PROGRAMMING = 0x00000007U, /*!< Card is in programming state */
|
|
HAL_SD_CARD_DISCONNECTED = 0x00000008U, /*!< Card is disconnected */
|
|
HAL_SD_CARD_ERROR = 0x000000FFU /*!< Card response Error */
|
|
}HAL_SD_CardStateTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition
|
|
* @{
|
|
*/
|
|
#define SD_InitTypeDef SDIO_InitTypeDef
|
|
#define SD_TypeDef SDIO_TypeDef
|
|
|
|
/**
|
|
* @brief SD Card Information Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t CardType; /*!< Specifies the card Type */
|
|
|
|
uint32_t CardVersion; /*!< Specifies the card version */
|
|
|
|
uint32_t Class; /*!< Specifies the class of the card class */
|
|
|
|
uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
|
|
|
|
uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
|
|
|
|
uint32_t BlockSize; /*!< Specifies one block size in bytes */
|
|
|
|
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
|
|
|
|
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
|
|
|
|
}HAL_SD_CardInfoTypeDef;
|
|
|
|
/**
|
|
* @brief SD handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
SD_TypeDef *Instance; /*!< SD registers base address */
|
|
|
|
SD_InitTypeDef Init; /*!< SD required parameters */
|
|
|
|
HAL_LockTypeDef Lock; /*!< SD locking object */
|
|
|
|
uint32_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */
|
|
|
|
uint32_t TxXferSize; /*!< SD Tx Transfer size */
|
|
|
|
uint32_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */
|
|
|
|
uint32_t RxXferSize; /*!< SD Rx Transfer size */
|
|
|
|
__IO uint32_t Context; /*!< SD transfer context */
|
|
|
|
__IO HAL_SD_StateTypeDef State; /*!< SD card State */
|
|
|
|
__IO uint32_t ErrorCode; /*!< SD Card Error codes */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
|
|
|
|
HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */
|
|
|
|
uint32_t CSD[4]; /*!< SD card specific data table */
|
|
|
|
uint32_t CID[4]; /*!< SD card identification number table */
|
|
|
|
}SD_HandleTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register
|
|
* @{
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO uint8_t CSDStruct; /*!< CSD structure */
|
|
__IO uint8_t SysSpecVersion; /*!< System specification version */
|
|
__IO uint8_t Reserved1; /*!< Reserved */
|
|
__IO uint8_t TAAC; /*!< Data read access time 1 */
|
|
__IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
|
|
__IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
|
|
__IO uint16_t CardComdClasses; /*!< Card command classes */
|
|
__IO uint8_t RdBlockLen; /*!< Max. read data block length */
|
|
__IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
|
|
__IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
|
|
__IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
|
|
__IO uint8_t DSRImpl; /*!< DSR implemented */
|
|
__IO uint8_t Reserved2; /*!< Reserved */
|
|
__IO uint32_t DeviceSize; /*!< Device Size */
|
|
__IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
|
|
__IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
|
|
__IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
|
|
__IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
|
|
__IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
|
|
__IO uint8_t EraseGrSize; /*!< Erase group size */
|
|
__IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
|
|
__IO uint8_t WrProtectGrSize; /*!< Write protect group size */
|
|
__IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
|
|
__IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
|
|
__IO uint8_t WrSpeedFact; /*!< Write speed factor */
|
|
__IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
|
|
__IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
|
|
__IO uint8_t Reserved3; /*!< Reserved */
|
|
__IO uint8_t ContentProtectAppli; /*!< Content protection application */
|
|
__IO uint8_t FileFormatGrouop; /*!< File format group */
|
|
__IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
|
|
__IO uint8_t PermWrProtect; /*!< Permanent write protection */
|
|
__IO uint8_t TempWrProtect; /*!< Temporary write protection */
|
|
__IO uint8_t FileFormat; /*!< File format */
|
|
__IO uint8_t ECC; /*!< ECC code */
|
|
__IO uint8_t CSD_CRC; /*!< CSD CRC */
|
|
__IO uint8_t Reserved4; /*!< Always 1 */
|
|
|
|
}HAL_SD_CardCSDTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register
|
|
* @{
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO uint8_t ManufacturerID; /*!< Manufacturer ID */
|
|
__IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
|
|
__IO uint32_t ProdName1; /*!< Product Name part1 */
|
|
__IO uint8_t ProdName2; /*!< Product Name part2 */
|
|
__IO uint8_t ProdRev; /*!< Product Revision */
|
|
__IO uint32_t ProdSN; /*!< Product Serial Number */
|
|
__IO uint8_t Reserved1; /*!< Reserved1 */
|
|
__IO uint16_t ManufactDate; /*!< Manufacturing Date */
|
|
__IO uint8_t CID_CRC; /*!< CID CRC */
|
|
__IO uint8_t Reserved2; /*!< Always 1 */
|
|
|
|
}HAL_SD_CardCIDTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13
|
|
* @{
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
|
|
__IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
|
|
__IO uint16_t CardType; /*!< Carries information about card type */
|
|
__IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
|
|
__IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
|
|
__IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
|
|
__IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
|
|
__IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
|
|
__IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
|
|
__IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
|
|
|
|
}HAL_SD_CardStatusTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup SD_Exported_Constants Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
#define BLOCKSIZE 512U /*!< Block size is 512 bytes */
|
|
|
|
/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
|
|
* @{
|
|
*/
|
|
#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
|
|
#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
|
|
#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
|
|
#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
|
|
#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
|
|
#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
|
|
#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
|
|
#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
|
|
#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
|
|
number of transferred bytes does not match the block length */
|
|
#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
|
|
#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
|
|
#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
|
|
#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
|
|
command or if there was an attempt to access a locked card */
|
|
#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
|
|
#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
|
|
#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
|
|
#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
|
|
#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
|
|
#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
|
|
#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
|
|
#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
|
|
#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
|
|
#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
|
|
#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
|
|
of erase sequence command was received */
|
|
#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
|
|
#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
|
|
#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
|
|
#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
|
|
#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
|
|
#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
|
|
#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
|
|
#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
|
|
#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
|
|
* @{
|
|
*/
|
|
#define SD_CONTEXT_NONE 0x00000000U /*!< None */
|
|
#define SD_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
|
|
#define SD_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
|
|
#define SD_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
|
|
#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
|
|
#define SD_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
|
|
#define SD_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
|
|
* @{
|
|
*/
|
|
#define CARD_SDSC 0x00000000U
|
|
#define CARD_SDHC_SDXC 0x00000001U
|
|
#define CARD_SECURED 0x00000003U
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
|
|
* @{
|
|
*/
|
|
#define CARD_V1_X 0x00000000U
|
|
#define CARD_V2_X 0x00000001U
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup SD_Exported_macros SD Exported Macros
|
|
* @brief macros to handle interrupts and specific clock configurations
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the SD device.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Disable the SD device.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Enable the SDMMC DMA transfer.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Disable the SDMMC DMA transfer.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance)
|
|
|
|
/**
|
|
* @brief Enable the SD device interrupt.
|
|
* @param __HANDLE__: SD Handle
|
|
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
|
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
|
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
|
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
|
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
|
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
|
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
|
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
|
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
|
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
|
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the SD device interrupt.
|
|
* @param __HANDLE__: SD Handle
|
|
* @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
|
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
|
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
|
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
|
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
|
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
|
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
|
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
|
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
|
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
|
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified SD flag is set or not.
|
|
* @param __HANDLE__: SD Handle
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
|
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
|
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
|
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
|
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
|
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
|
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
|
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
|
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
|
|
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
|
* @arg SDIO_FLAG_CMDACT: Command transfer in progress
|
|
* @arg SDIO_FLAG_TXACT: Data transmit in progress
|
|
* @arg SDIO_FLAG_RXACT: Data receive in progress
|
|
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
|
|
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
|
|
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
|
|
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
|
|
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
|
|
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
|
|
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
|
|
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
|
|
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
|
* @retval The new state of SD FLAG (SET or RESET).
|
|
*/
|
|
#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
|
|
|
/**
|
|
* @brief Clear the SD's pending flags.
|
|
* @param __HANDLE__: SD Handle
|
|
* @param __FLAG__: specifies the flag to clear.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
|
|
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
|
|
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
|
|
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
|
|
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
|
|
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
|
|
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
|
|
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
|
|
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
|
|
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
|
|
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
|
|
|
/**
|
|
* @brief Check whether the specified SD interrupt has occurred or not.
|
|
* @param __HANDLE__: SD Handle
|
|
* @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
|
|
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
|
|
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
|
|
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
|
|
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
|
|
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
|
|
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
|
|
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
|
|
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
|
|
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
|
|
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval The new state of SD IT (SET or RESET).
|
|
*/
|
|
#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Clear the SD's interrupt pending bits.
|
|
* @param __HANDLE__: SD Handle
|
|
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
|
|
* This parameter can be one or a combination of the following values:
|
|
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
|
|
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
|
|
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
|
|
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
|
|
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
|
|
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
|
|
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
|
|
* @arg SDIO_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt
|
|
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup SD_Exported_Functions SD Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);
|
|
HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);
|
|
HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
|
|
void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
|
|
void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
|
|
* @{
|
|
*/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
|
|
/* Non-Blocking mode: IT */
|
|
HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
|
|
|
|
void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
|
|
|
|
/* Callback in non blocking modes (DMA) */
|
|
void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);
|
|
void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);
|
|
void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);
|
|
void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Functions_Group4 SD card related functions
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
|
|
HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);
|
|
HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID);
|
|
HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD);
|
|
HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus);
|
|
HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions
|
|
* @{
|
|
*/
|
|
HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);
|
|
uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);
|
|
HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/** @defgroup SD_Private_Types SD Private Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private defines -----------------------------------------------------------*/
|
|
/** @defgroup SD_Private_Defines SD Private Defines
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/** @defgroup SD_Private_Variables SD Private Variables
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup SD_Private_Constants SD Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup SD_Private_Macros SD Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions prototypes ----------------------------------------------*/
|
|
/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @defgroup SD_Private_Functions SD Private Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* STM32F103xE || STM32F103xG */
|
|
|
|
#endif /* __STM32F1xx_HAL_SD_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|