Fix italian translation

This commit is contained in:
tnw513 2018-02-06 15:09:06 +01:00
parent ca76c3df7a
commit 41785a10dd

View File

@ -75,6 +75,8 @@
#define MSG_MOVE_AXIS _UxGT("Muovi Asse") #define MSG_MOVE_AXIS _UxGT("Muovi Asse")
#define MSG_BED_LEVELING _UxGT("Livella piano") #define MSG_BED_LEVELING _UxGT("Livella piano")
#define MSG_LEVEL_BED _UxGT("Livella piano") #define MSG_LEVEL_BED _UxGT("Livella piano")
#define MSG_LEVEL_CORNERS _UxGT("Livella spigoli")
#define MSG_NEXT_CORNER _UxGT("Prossimo spigolo")
#define MSG_EDITING_STOPPED _UxGT("Modifica Mesh Fermata") #define MSG_EDITING_STOPPED _UxGT("Modifica Mesh Fermata")
#define MSG_USER_MENU _UxGT("Comandi Utente") #define MSG_USER_MENU _UxGT("Comandi Utente")
@ -85,7 +87,7 @@
#define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale") #define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale")
#define MSG_UBL_BC_INSERT _UxGT("Metti spessore & misura") #define MSG_UBL_BC_INSERT _UxGT("Metti spessore & misura")
#define MSG_UBL_BC_INSERT2 _UxGT("Misura") #define MSG_UBL_BC_INSERT2 _UxGT("Misura")
#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi & misura piatto") #define MSG_UBL_BC_REMOVE _UxGT("Rimuovi e misura piatto")
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento sucessivo") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento sucessivo")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL") #define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL")
@ -93,6 +95,7 @@
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello") #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
@ -132,11 +135,34 @@
#define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria") #define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria")
#define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto") #define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto")
#define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto") #define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto")
#define MSG_MESH_LOADED _UxGT("Mesh %i caricata")
#define MSG_MESH_SAVED _UxGT("Mesh %i salvata")
#define MSG_NO_STORAGE _UxGT("Nessuna memoria")
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL")
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato")
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo passo") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo passo")
#define MSG_LED_CONTROL _UxGT("Controllo LED")
#define MSG_LEDS_ON _UxGT("Luci On")
#define MSG_LEDS_OFF _UxGT("Luci Off")
#define MSG_LED_PRESETS _UxGT("Preset luci")
#define MSG_SET_LEDS_RED _UxGT("Rosso")
#define MSG_SET_LEDS_ORANGE _UxGT("Arancione")
#define MSG_SET_LEDS_YELLOW _UxGT("Giallo")
#define MSG_SET_LEDS_GREEN _UxGT("Verde")
#define MSG_SET_LEDS_BLUE _UxGT("Blu")
#define MSG_SET_LEDS_INDIGO _UxGT("Indaco")
#define MSG_SET_LEDS_VIOLET _UxGT("Viola")
#define MSG_SET_LEDS_WHITE _UxGT("Bianco")
#define MSG_SET_LEDS_DEFAULT _UxGT("Predefinito")
#define MSG_CUSTOM_LEDS _UxGT("Luci personalizzate")
#define MSG_INTENSITY_R _UxGT("Intensita rosso")
#define MSG_INTENSITY_G _UxGT("Intensita verde")
#define MSG_INTENSITY_B _UxGT("Intensita blu")
#define MSG_INTENSITY_W _UxGT("Intensita bianco")
#define MSG_LED_BRIGHTNESS _UxGT("Luminosita")
#define MSG_MOVING _UxGT("In movimento...") #define MSG_MOVING _UxGT("In movimento...")
#define MSG_FREE_XY _UxGT("XY liberi") #define MSG_FREE_XY _UxGT("XY liberi")
#define MSG_MOVE_X _UxGT("Muovi X") #define MSG_MOVE_X _UxGT("Muovi X")
@ -150,7 +176,8 @@
#define MSG_BED_Z _UxGT("piatto Z") #define MSG_BED_Z _UxGT("piatto Z")
#define MSG_NOZZLE _UxGT("Ugello") #define MSG_NOZZLE _UxGT("Ugello")
#define MSG_BED _UxGT("Piatto") #define MSG_BED _UxGT("Piatto")
#define MSG_FAN_SPEED _UxGT("Velocità ventola") #define MSG_FAN_SPEED _UxGT("Velocita ventola")
#define MSG_EXTRA_FAN_SPEED _UxGT("Magg vel ventola")
#define MSG_FLOW _UxGT("Flusso") #define MSG_FLOW _UxGT("Flusso")
#define MSG_CONTROL _UxGT("Controllo") #define MSG_CONTROL _UxGT("Controllo")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
@ -205,6 +232,8 @@
#define MSG_FILAMENT _UxGT("Filamento") #define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. filo") #define MSG_FILAMENT_DIAM _UxGT("Diam. filo")
#define MSG_FILAMENT_UNLOAD _UxGT("Rimuovi mm")
#define MSG_FILAMENT_LOAD _UxGT("Carica mm")
#define MSG_ADVANCE_K _UxGT("K Avanzamento") #define MSG_ADVANCE_K _UxGT("K Avanzamento")
#define MSG_CONTRAST _UxGT("Contrasto LCD") #define MSG_CONTRAST _UxGT("Contrasto LCD")
#define MSG_STORE_EEPROM _UxGT("Salva in memoria") #define MSG_STORE_EEPROM _UxGT("Salva in memoria")
@ -235,11 +264,16 @@
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRitrai") #define MSG_AUTORETRACT _UxGT("AutoRitrai")
#define MSG_FILAMENTCHANGE _UxGT("Cambia filamento") #define MSG_FILAMENTCHANGE _UxGT("Cambia filamento")
#define MSG_FILAMENTLOAD _UxGT("Carica filamento")
#define MSG_FILAMENTUNLOAD _UxGT("Rimuovi filamento")
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Rimuovi tutto")
#define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card") #define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card")
#define MSG_CNG_SDCARD _UxGT("Cambia SD-Card") #define MSG_CNG_SDCARD _UxGT("Cambia SD-Card")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") #define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#define MSG_SKEW_FACTOR _UxGT("Fattore distorsione")
#define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH _UxGT("BLTouch")
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
#define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch") #define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch")
@ -274,8 +308,12 @@
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y") #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center")
#define MSG_DELTA_SETTINGS _UxGT("Impostaz. Delta")
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione")
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta")
#define MSG_DELTA_DIAG_ROD _UxGT("Barra Diagonale")
#define MSG_DELTA_HEIGHT _UxGT("Altezza")
#define MSG_DELTA_RADIUS _UxGT("Raggio")
#define MSG_INFO_MENU _UxGT("Riguardo stampante") #define MSG_INFO_MENU _UxGT("Riguardo stampante")
#define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante") #define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante")
#define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti") #define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti")
@ -314,9 +352,15 @@
#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM") #define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA") #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA")
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CARICA FILAMENTO")
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("RIMUOVI FILAMENTO")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:")
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Libera di piu")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ")
#define MSG_ERR_HOMING_FAILED _UxGT("Home fallito")
#define MSG_ERR_PROBING_FAILED _UxGT("Probing fallito")
#define MSG_M600_TOO_COLD _UxGT("M600:Troppo freddo")
#if LCD_HEIGHT >= 4 #if LCD_HEIGHT >= 4
// Up to 3 lines allowed // Up to 3 lines allowed
@ -336,6 +380,9 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("lo spurgo")
#define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa")
@ -344,8 +391,10 @@
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...") #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Riscalda ugello")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Spurgo filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...")
#endif // LCD_HEIGHT < 4 #endif // LCD_HEIGHT < 4