feed_factor => inverse_secs

This commit is contained in:
Scott Lahteine 2017-12-06 23:02:37 -06:00
parent 6b93d20e4e
commit 6310a00d7e

View File

@ -12649,7 +12649,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
#if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING) #if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING)
// SCARA needs to scale the feed rate from mm/s to degrees/s // SCARA needs to scale the feed rate from mm/s to degrees/s
const float inv_segment_length = min(10.0, float(segments) / cartesian_mm), // 1/mm/segs const float inv_segment_length = min(10.0, float(segments) / cartesian_mm), // 1/mm/segs
feed_factor = inv_segment_length * _feedrate_mm_s; inverse_secs = inv_segment_length * _feedrate_mm_s;
float oldA = stepper.get_axis_position_degrees(A_AXIS), float oldA = stepper.get_axis_position_degrees(A_AXIS),
oldB = stepper.get_axis_position_degrees(B_AXIS); oldB = stepper.get_axis_position_degrees(B_AXIS);
#endif #endif
@ -12683,7 +12683,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// Use ratio between the length of the move and the larger angle change // Use ratio between the length of the move and the larger angle change
const float adiff = abs(delta[A_AXIS] - oldA), const float adiff = abs(delta[A_AXIS] - oldA),
bdiff = abs(delta[B_AXIS] - oldB); bdiff = abs(delta[B_AXIS] - oldB);
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], max(adiff, bdiff) * feed_factor, active_extruder); planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], max(adiff, bdiff) * inverse_secs, active_extruder);
oldA = delta[A_AXIS]; oldA = delta[A_AXIS];
oldB = delta[B_AXIS]; oldB = delta[B_AXIS];
#else #else
@ -12701,7 +12701,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
ADJUST_DELTA(rtarget); ADJUST_DELTA(rtarget);
const float adiff = abs(delta[A_AXIS] - oldA), const float adiff = abs(delta[A_AXIS] - oldA),
bdiff = abs(delta[B_AXIS] - oldB); bdiff = abs(delta[B_AXIS] - oldB);
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], max(adiff, bdiff) * feed_factor, active_extruder); planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], max(adiff, bdiff) * inverse_secs, active_extruder);
#else #else
planner.buffer_line_kinematic(rtarget, _feedrate_mm_s, active_extruder); planner.buffer_line_kinematic(rtarget, _feedrate_mm_s, active_extruder);
#endif #endif