daid303
|
047d037f8c
|
#ifdef fix for #326
|
2012-12-13 09:04:41 +01:00 |
|
daid303
|
f30b46b2a8
|
One more fix for #338, I really should get a heated bed to test with.
|
2012-12-12 23:06:17 +01:00 |
|
daid303
|
65c3f1ffcd
|
Most likely fixing #338
|
2012-12-12 21:56:17 +01:00 |
|
daid303
|
7577717b59
|
Fixed #336
|
2012-12-12 13:08:26 +01:00 |
|
daid303
|
1a8f54cea1
|
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
|
2012-12-12 11:47:03 +01:00 |
|
daid303
|
6731c094ee
|
Fix compiling with just an 16x2 LCD and no buttons.
|
2012-12-12 11:32:33 +01:00 |
|
daid303
|
b99a928a80
|
Fix the M117 (display message on LCD) when used over USB with checksums.
|
2012-12-12 09:35:32 +01:00 |
|
daid303
|
55ba90ac19
|
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
|
2012-12-12 09:08:37 +01:00 |
|
daid303
|
5ff5cee8ce
|
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
|
2012-12-11 14:53:53 +01:00 |
|
daid303
|
8b58edc70e
|
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
|
2012-12-11 13:38:34 +01:00 |
|
daid
|
d0319d45af
|
Merge pull request #335 from jcrocholl/Marlin_v1
Fix endstop pins for Printrboard
|
2012-12-11 02:59:58 -08:00 |
|
Johann Rocholl
|
ca409e5531
|
Fix X/Y/Z_MIN_PIN for Printrboard.
|
2012-12-11 01:59:48 -08:00 |
|
Johann Rocholl
|
1f45cb0a51
|
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
|
2012-12-11 01:54:40 -08:00 |
|
daid303
|
46ec4b648c
|
Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
|
2012-12-11 10:21:44 +01:00 |
|
Daid
|
724f5aa36b
|
Update on makefile for moved Arduino addons.
|
2012-12-10 12:06:30 +01:00 |
|
daid303
|
6d9dfa96c3
|
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
|
2012-12-10 12:02:29 +01:00 |
|
daid303
|
3fb07d9b8d
|
Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
|
2012-12-10 10:48:46 +01:00 |
|
daid303
|
82c8724b33
|
Fix compile with PID_DEBUG
|
2012-12-09 23:50:12 +01:00 |
|
daid303
|
9b160972a1
|
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
|
2012-12-09 23:46:42 +01:00 |
|
daid303
|
e036750bdf
|
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
|
2012-12-09 23:46:25 +01:00 |
|
Daid
|
fcd9de72ef
|
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
|
2012-12-09 23:31:07 +01:00 |
|
Daid
|
32d4373e0f
|
Add printrboard and brainwave to Makefile.
|
2012-12-09 23:30:55 +01:00 |
|
daid
|
b3ddbcee2a
|
Merge pull request #329 from jcrocholl/Marlin_v1
Add Printrboard and Brainwave to pins.h and fastio.h
|
2012-12-09 14:29:26 -08:00 |
|
Daid
|
29435dfb4b
|
Proper avr for Sanguino in Makefile.
|
2012-12-09 23:02:03 +01:00 |
|
daid303
|
52158dffcc
|
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
|
2012-12-09 23:00:06 +01:00 |
|
Daid
|
ca7acbe6d9
|
Allow specification of which arduino hardware subvariant in Makefile.
|
2012-12-09 19:19:57 +01:00 |
|
Johann Rocholl
|
33247733e0
|
Teensylu and Printrboard use different analog pins for thermistors.
|
2012-12-09 02:19:13 -08:00 |
|
Johann Rocholl
|
621c24a10f
|
AT90USB is only defined after pins.h is included.
|
2012-12-09 01:40:33 -08:00 |
|
Johann Rocholl
|
6cba11f087
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
2012-12-09 01:32:09 -08:00 |
|
Johann Rocholl
|
4d351b4846
|
Improved formatting and comments for consistency.
|
2012-12-08 20:15:53 -08:00 |
|
Johann Rocholl
|
a30007caa4
|
If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.
|
2012-12-08 19:46:42 -08:00 |
|
Johann Rocholl
|
6aa87a7b67
|
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
|
2012-12-08 15:16:38 -08:00 |
|
Johann Rocholl
|
b1c38d4c82
|
Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.
|
2012-12-08 11:34:18 -08:00 |
|
Johann Rocholl
|
42e21bb06e
|
Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter).
|
2012-12-08 10:49:01 -08:00 |
|
Johann Rocholl
|
ce4b5bbeaa
|
Add AT90USB646 support from Sprinter to fastio.h.
|
2012-12-08 10:45:58 -08:00 |
|
Daid
|
f413aa33b3
|
Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.
|
2012-12-08 11:49:53 +01:00 |
|
daid303
|
587154c01b
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
2012-12-06 10:36:07 +01:00 |
|
daid303
|
1f27870d41
|
Fix compiling the watchdog error message when the manual reset watchdog is used.
|
2012-12-06 10:27:50 +01:00 |
|
daid303
|
c5d4225804
|
Mistake there, not sure why I did that. My bad.
|
2012-12-05 20:23:13 +01:00 |
|
daid303
|
529748894c
|
Minor changes in the temperature code for some cleanup.
|
2012-12-05 19:54:01 +01:00 |
|
daid303
|
4e26ecc940
|
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
|
2012-12-05 19:32:26 +01:00 |
|
daid303
|
c421774422
|
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
|
2012-12-05 19:32:02 +01:00 |
|
daid303
|
16078e47d4
|
Fixed #325
|
2012-12-04 16:27:21 +01:00 |
|
daid303
|
6a9bee27cc
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
2012-12-03 12:52:00 +01:00 |
|
daid303
|
94ea26ff46
|
Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.
|
2012-12-03 12:13:20 +01:00 |
|
daid303
|
6c51fe5039
|
Fix the bug where the SD percentage calculation is wrong when the file is larger then 42MB
|
2012-12-03 11:35:36 +01:00 |
|
brupje
|
57429cb9fe
|
Fix for keypad
|
2012-11-29 21:42:19 +01:00 |
|
daid303
|
97fa2a9c30
|
Few simple fixes that save RAM, as static strings are stored in RAM by default.
|
2012-11-28 10:30:34 +01:00 |
|
Daid
|
c94ca24adc
|
Fixed #317
|
2012-11-24 17:32:30 +01:00 |
|
Daid
|
99e9554edd
|
Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants.
|
2012-11-24 11:46:31 +01:00 |
|