Commit Graph

55 Commits

Author SHA1 Message Date
Scott Lahteine
c747becec1 Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom
Add PIDTEMPBED to EEPROM
2015-04-03 20:03:38 -07:00
Scott Lahteine
007a4bd421 Adjust spacing in view function 2015-04-03 16:41:58 -07:00
Scott Lahteine
424d5495e4 Add PIDTEMPBED to EEPROM 2015-04-03 16:38:05 -07:00
Scott Lahteine
0e8182bbf2 Additional pin tests, cleanup 2015-04-03 15:31:35 -07:00
Scott Lahteine
ba871e46bf Fix compiler warnings
- Patched up for most included configurations
2015-03-27 20:29:05 -07:00
Scott Lahteine
460f73056b Fix ECHOPAIR ambiguity
- Also patch up some warnings
2015-03-27 00:46:39 -07:00
Scott Lahteine
b2496533c6 Put " M" into pmem 2015-03-26 20:30:14 -07:00
Scott Lahteine
abadeac08d Group zprobe_zoffset with bed leveling 2015-03-25 23:06:33 -07:00
Scott Lahteine
fbf9b21e0c Merge plus fixup zprobe_zoffset
- Make `zprobe_zoffset` conditional
- Fix ConfigurationStore for `zprobe_zoffset`
2015-03-25 21:14:00 -07:00
Scott Lahteine
96b5da7198 Fix up bed leveling code
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
2015-03-25 20:36:24 -07:00
alexborro
0ce3576685 New Feature: Z_DUAL_ENDSTOPS
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
2015-03-24 14:06:44 -03:00
Scott Lahteine
691e753cc3 Don't add home offsets in G29
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
2015-03-21 16:30:02 -07:00
Edward Patel
5112cf8422 Added comment for the EEPROM storage 2015-03-20 11:46:47 +01:00
Edward Patel
28c91deb5c EEPROM saving of z_values.
Tried to make it a little intelligent.
2015-03-18 21:07:07 +01:00
Edward Patel
8005d22c81 Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
alexborro
9157cbd8f3 Add Travel Acceleration and change the M204 options
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
2015-03-11 13:19:02 -03:00
Scott Lahteine
72856166a9 Fix bad typo in ConfigurationStore.cpp 2015-02-06 14:43:58 -08:00
Scott Lahteine
fe3810f073 yeah, what he said 2015-01-28 22:27:15 -08:00
Scott Lahteine
6137bbd484 use eeprom read correctly 2015-01-28 22:10:31 -08:00
Scott Lahteine
9bc9051405 Flag EEPROM write errors on serial output
- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
2015-01-28 21:19:51 -08:00
Scott Lahteine
ff99ca3040 Fix alignment of Restore following PIDTEMP
Should be reading 4 x 4 PID values instead of 4 x 3
2015-01-28 20:48:32 -08:00
Scott Lahteine
093fedfde8 Make EEPROM storage consistent
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
2015-01-28 01:08:48 -08:00
clefranc
d55c62bf9f Update ConfigurationStore.cpp
Moved #endif to allow filament settings to print.
2015-01-27 13:28:37 -05:00
clefranc
e779641c73 Update ConfigurationStore.cpp
Added PIDTEMP dummy write to align EEPROM read/write operation.
2015-01-27 13:25:47 -05:00
MagoKimbra
986e723eeb Add 4th extruder 2015-01-24 13:37:58 +01:00
Michael Neumann
a9d7ab9530 Update ConfigurationStore.cpp
Done
2015-01-23 21:05:27 +01:00
Michael Neumann
2d454da3af Update ConfigurationStore.cpp
Show Custom M Code when entering M503
2015-01-20 16:21:44 +01:00
daid
53f971095d Revert "Reduce PROGMEM warnings" 2015-01-16 16:48:22 +01:00
Bo Herrmannsen
ab074dac17 Merge pull request #1344 from grob6000/independent_pid
Independent PID parameters for each extruder
2015-01-13 12:10:37 +01:00
odewdney
538859669d Removing compiler warnings for progmem 2015-01-11 18:14:21 +00:00
grob6000
bf2c923db5 Make multiple PID parameters a config option
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
2015-01-11 13:50:17 +11:00
grob6000
3e2af67ce3 Fix R-H compatibility
* R-H reads incorrect M301 line from EEPROM output if more than one is
present. Reverted to original output format, using only E0 value.
2015-01-10 16:44:28 +11:00
grob6000
37c7e8300f Independent PID parameters for each extruder
* Variables Kp, Ki, Kd, Kc now arrays of size EXTRUDERS
* M301 gains (optional, default=0) E parameter to define which
extruder's settings to modify. Tested, works with Repetier Host's EEPROM
config window, albeit only reads/updates settings for E0.
* All Kp, Ki, Kd, Kc parameters saved in EEPROM (version now v14), up to
3 extruders supported (same as Marlin in general)
2015-01-10 16:35:12 +11:00
wgm4321
d60efc3b5d Fix syntax error caused by previous changes. 2014-12-28 20:47:59 -05:00
wgm4321
cb12161191 Add Filament menu and add Filament/Retract settings to config store. 2014-12-28 20:43:14 -05:00
Matthew Schick
0468f81950 Update for pull request #837 2014-12-28 11:22:44 -05:00
Matthew Schick
6e42c9e305 Add fwretract settings to M503 output 2014-12-28 11:22:44 -05:00
alexborro
d74aabf259 Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 2014-12-21 10:06:05 -02:00
John Davis
7464d3c96a Update ConfigurationStore.cpp
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
2014-12-19 17:08:43 -05:00
Scott Lahteine
07c6b5ab71 Using axis constants 2014-12-18 08:13:08 -08:00
Scott Lahteine
f989bd5435 Simple code cleanup. Rename "homeing" to homing. 2014-10-05 13:20:53 -07:00
cocktailyogi
512f2a3136 restore Branch from Backup
sorry for that
2014-06-23 17:09:57 +02:00
Erik van der Zalm
fcd8524b6e Only increase EEPROM version for DELTA printers. 2014-02-26 17:29:27 +01:00
Jim Morris
af9395ac2e Add M605 to dynamically set delta configuration
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
2014-02-17 20:50:59 -08:00
l.lefebvre
fdac8f6cec Update ConfigurationStore.cpp
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
2014-01-17 16:09:58 +01:00
Alex Borro
05932e4458 Add Z Probe Offset to EEPROM and Ultra LCD 2014-01-16 18:13:46 -02:00
Erik van der Zalm
3626b5ad8b Removed Delta from the default config file.
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
2013-09-14 13:50:09 +02:00
Peter Hercek
9aa2229077 add command M666 for adjusting delta printer endstop position 2013-08-28 01:15:20 +02:00
Michael Mayer
e509cdbeb0 added contrast control function for gLCDs 2013-07-14 15:28:26 +07:00
Stefanowicz
31bb3fb297 Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined 2013-04-12 18:04:32 +02:00