Scott Lahteine
28e7562e7a
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 01:09:51 -06:00
Scott Lahteine
3a1fedaee6
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 15:41:20 -06:00
Bob-the-Kuhn
1647db8fad
Set CONTROLLER_FAN_PIN example to -1
2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements ( #9663 )
...
* UBL - Allow user to control Z-Height correction for off mesh movements
* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
2018-02-15 19:23:01 -06:00
Scott Lahteine
d89a61bd51
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:56:03 -06:00
Scott Lahteine
4f04f4e6b8
Followup to #9532
2018-02-08 03:39:20 -06:00
jaysonkelly
f8a8711075
I2C position encoders update
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 02:46:12 -06:00
Scott Lahteine
8438a57910
Followup to #9532
2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1
[1.1.x] Enable Z axis and delta sensorless homing ( #9532 )
2018-02-08 02:02:48 -06:00
Scott Lahteine
80946a17ee
Add AUTO_POWER_CONTROL to example configs
2018-02-06 00:20:26 -06:00
Scott Lahteine
527d260581
Add ULTI_CONTROLLER to example configs
2018-02-05 22:24:08 -06:00
Scott Lahteine
ca58084020
Add MALYAN_LCD to configurations
2018-02-04 21:18:42 -06:00
Manuel Valentino
652162777b
[1.1.x] Fixed wrong information about TMC2208 wiring ( #9334 )
2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f
Add TMC software SPI ( #9362 )
2018-02-02 03:56:08 -06:00
Scott Lahteine
3d9f360b5a
Better probe boundaries for linear/grid
2018-01-22 01:10:34 -06:00
Scott Lahteine
957bb3124a
Add thermistor 15 tuned for JGAurora A5
2018-01-21 16:57:47 -06:00
Scott Lahteine
428fbe8228
Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:27:30 -06:00
Scott Lahteine
69c993092b
Followup to Ender config
2018-01-15 05:48:50 -06:00
Scott Lahteine
8f08e029d8
More up-front option to show SD percentage
2018-01-14 23:30:59 -06:00
Scott Lahteine
d1ce0bc071
M915 Z Axis Calibration
2018-01-09 18:55:08 -06:00
GMagician
5903b002ac
1.1.x semitec 104NT-4 added ( #9120 )
...
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:44 -06:00
Scott Lahteine
8e82dd0b5b
Merge pull request #8947 from houseofbugs/bugfix-1.1.x
...
[1.1.x] SLIM_LCD_MENUS option
2017-12-31 00:56:10 -06:00
Scott Lahteine
839dd66c3b
Synchronize configs with 2.0.x
2017-12-31 00:02:22 -06:00
Scott Lahteine
7a8c132ee9
Apply SLIM_LCD_MENUS to example configs
2017-12-30 23:52:53 -06:00
Scott Lahteine
d1cad5afa4
Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs
2017-12-30 18:22:31 -06:00
Scott Lahteine
00749d8ef0
Add pause/resume action to example configs
2017-12-25 01:28:16 -06:00
Thomas Moore
59d047c1d7
[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8864 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-24 23:47:05 -06:00
Scott Lahteine
88c0688961
Reduce default jerk. XY by half. Z by 1/4
2017-12-24 19:49:51 -06:00
Scott Lahteine
ab7f1a0608
A single setting to validate filament width
2017-12-19 21:34:30 -06:00
Scott Lahteine
e6f46f3832
Add NO_VOLUMETRICS to example configs
2017-12-19 20:32:40 -06:00
Scott Lahteine
7378905053
Add MKS_12864OLED_SSD1306 to example configs
...
Followup to #8813
2017-12-16 19:58:34 -06:00
Scott Lahteine
fdf83f1416
Apply ZONESTAR_LCD to example configs
2017-12-15 19:13:31 -06:00
Scott Lahteine
9a4af6bd7c
Add NANODLP_ALL_AXIS to config examples
2017-12-15 16:05:29 -06:00
teemuatlut
0ac0324af2
[1.1.x] TMC driver update ( #8712 )
2017-12-15 15:02:39 -06:00
Scott Lahteine
666d95285b
Mention that segments interpolate more
2017-12-09 06:18:41 -06:00
Scott Lahteine
6eb268f63f
Remove old UBL description text
2017-12-08 17:52:44 -06:00
Scott Lahteine
6e85c060a9
Apply MULTIPLE_PROBING to example configs
2017-12-07 16:18:53 -06:00
Scott Lahteine
794f8f1329
Update K1 => PID_K1
2017-12-05 19:59:01 -06:00
Scott Lahteine
d8582b7506
Bring configurations up to date
2017-12-02 21:42:36 -06:00
Scott Lahteine
a8d83aec89
Add SKEW_CORRECTION to example configs
2017-12-01 19:43:31 -06:00
Scott Lahteine
1f770bb103
Config updates, spacing mainly
2017-11-29 20:57:38 -06:00
Tannoo
e25567a5dd
New feature: LED_CONTROL_MENU
2017-11-29 20:57:38 -06:00
Scott Lahteine
80929c2637
Apply SEGMENT_LEVELED_MOVES to example configs
2017-11-29 16:58:16 -06:00
Scott Lahteine
fd50f452ff
Whitespace cleanup
2017-11-28 17:49:25 -06:00
Scott Lahteine
51d09bb9c9
Tweak BLOCK_BUFFER_SIZE config
2017-11-26 17:33:33 -06:00
Scott Lahteine
c0190eff00
Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x
2017-11-24 15:54:02 -06:00
Rob Power
f8e30f49d7
Add NanoDLP Z movement synchronization option
...
Implemented synchronization message output for NanoDLP printers (nanodlp.com).
If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.
2017-11-24 00:32:03 -06:00
Scott Lahteine
e5b43d48ee
Apply G26 for meshes to all configs
2017-11-23 21:41:27 -06:00
Scott Lahteine
b8c65078fc
NEOPIXEL_RGBW_LED => NEOPIXEL_LED
2017-11-23 16:41:04 -06:00
Scott Lahteine
8d06cf7b84
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:06:35 -06:00
