Commit Graph

842 Commits

Author SHA1 Message Date
LVD-AC
585c00a728 Proposed changes
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
baf3b91460 DELTA_TOWER_ANGLE_TRIM only needs AB 2017-04-29 15:29:49 +03:00
Scott Lahteine
7db805930a Cleanup configurations 2017-04-28 18:32:39 -05:00
Scott Lahteine
0a8e09c723 Clean up excess whitespace, comment formatting 2017-04-28 18:32:38 -05:00
LVD-AC
ed6b361e27 cleanup ready to squash 2017-04-28 18:09:18 +03:00
Roxy-3D
4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
3601f08e87 Better tuned FolgerTech i3-2020 example file 2017-04-27 11:16:38 -05:00
Roxy-3D
a20b7d9581 Better tuned Example file for FolgerTech i3-2020
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Roxy-3D
22f6e277af Get example files fully into compliance
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
Roxy-3D
ec26e23e7e Add my two 'Nice' machines as example configurations
These are my two 'Nice' machines.  Both are good example machines.  The
FolgerTech i3-2020 is probably the best value kit on the market right
now.  And it has developed a 'Cult Following' of hobbiests.  I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.

And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin.  For sure, I'll always have up to the minute Configuration.h
files for this printer also.   I've moved over to using the gMax as my
primary development machine for Marlin.   So...  Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
LVD-AC
dcf30a69d6 Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Scott Lahteine
959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
Scott Lahteine
ff0018e287 Format hex values as uppercase 2017-04-21 21:42:41 -05:00
LVD-AC
d4f593d200 Delete 'expert level'
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878 M665 rework and related issues (all delta's)
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
9b94210394 Bring FLSUN config more up to date 2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0 Updates for all configs 2017-04-20 17:52:05 -05:00
Scott Lahteine
a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine
d60c02c5b1 Cleanup, extend TMC2130 configuration 2017-04-14 22:43:56 -05:00
Scott Lahteine
0e97b3d6d0 Fix some configuration spacing 2017-04-14 22:36:10 -05:00
LVD-AC
03bda24d19 Add delta auto-calibration and configuration for Flsun AC 2017-04-14 19:08:14 -05:00
Scott Lahteine
1bd25fd2b3 Clean up config spacing, section headings, etc. 2017-04-14 19:06:31 -05:00
Scott Lahteine
153b0ae967 Tweak Delta Printer configuration note 2017-04-14 19:06:06 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9 Expose EXT_SOLENOID as an advanced option 2017-04-14 17:24:36 -05:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8 Group BABYSTEPPING options together 2017-04-13 16:26:45 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
67fb7f82ac Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
Save / restore z_fade_height in EEPROM
2017-04-10 20:05:20 -05:00
james94jeans2
5b9476fe78 Added z_fade_height to EEPROM-Settings
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
2017-04-09 21:16:58 -05:00
Scott Lahteine
9343f6a95f Put TOSHIBA with other stepper driver options 2017-04-09 20:52:49 -05:00
Scott Lahteine
4cdda5615b Bring other configs up to date with wt150 changes 2017-04-09 06:45:42 -05:00
Paweł Stawicki
0eb16d9ff7 Add example config for the wt150 printer with RepRapDiscount Full Graphic Smart Controller 2017-04-09 06:44:54 -05:00
Scott Lahteine
e5b16081cb Update TinyBoy2 configurations 2017-04-09 06:44:53 -05:00
Scott Lahteine
1855534f20 Config files cleanup 2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b Additional missed patches 2017-04-09 04:24:23 -05:00
Scott Lahteine
39617e10b8 Patch configs comment formatting 2017-04-09 03:49:16 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
2b88ccd0aa Apply UBL mesh bounds to remaining configs 2017-04-09 03:49:15 -05:00
Jimmy Envall
f78d44e91a Added support for delta tower angle corrections. 2017-04-08 21:13:44 -05:00
Scott Lahteine
824f3c1c0d Fix up configuration comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
f8408036f2 Merge pull request #6264 from thinkyhead/rc_five_extruders
Support up to 5 extruders in Marlin
2017-04-07 12:48:56 -05:00
Bob-the-Kuhn
f7fc49c3a3 Finish name change
DAC_STEPPER_DFLT wasn't changed to DAC_MOTOR_CURRENT_DEFAULT in all
places on PR #6124
2017-04-07 11:05:24 -05:00
Scott Lahteine
2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Bob-the-Kuhn
549055f20c Merge pull request #6124 from Bob-the-Kuhn/MCP4728-consistency
MCP4728 consistency & fix ultralcd.cpp (PRINTRBOARD Rev F and RIGIDBOARD V2)
2017-04-06 16:35:50 -05:00
Bob-the-Kuhn
3b9ff2cb12 Merge pull request #5676 from Bob-the-Kuhn/configuration.h
Configuration.h - reword Z PROBE section
2017-04-06 16:18:34 -05:00
Bob-the-Kuhn
6643d553f6 # This is a combination of 2 commits.
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
2017-04-06 16:16:27 -05:00
Bob-the-Kuhn
a5abc61fb9 Merge pull request #6219 from Bob-the-Kuhn/Servo-probe-and-toggle-pins
M43 - add Toggle utility and Z servo utility (replaces PR #5864)
2017-04-06 16:10:50 -05:00
Bob-the-Kuhn
3b8926bd09 improved wording, consolidation of info, BLTouch warning
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
d13991ae18 Use same config name for all mesh dimensions 2017-04-06 16:05:59 -05:00
Bob-the-Kuhn
f9686a108c add Z servo test and toggle pins to M43 2017-04-06 15:59:38 -05:00
Scott Lahteine
62cbaa302e Z_DUAL_ENDSTOP - make offset a configuration item
The offset for Z_DUAL_ENDSTOP (z_endstop_adj) is already in Marlin.
This PR just makes it a configuration item.

z_endstop_adj is initialized in two places so both had to be modified.
2017-04-06 15:57:10 -05:00
Scott Lahteine
eb1e6aa29b Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Scott Lahteine
c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9 Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
2017-04-02 10:32:04 -05:00
Scott Lahteine
b47fd31c37 Revert some changes to UBL 2017-04-01 21:53:45 -05:00
Scott Lahteine
63abb65146 Update description of PINS_DEBUGGING 2017-03-31 18:57:48 -05:00
Scott Lahteine
9e22184936 Add a "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine
81136c1e82 Merge pull request #6177 from thinkyhead/rc_tinyboy
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00
Stefan Brüns
6ba6c92a81 Add example configuration for TinyBoy L10/L16
The TB2 is a Indiegogo funded 3d printer. It uses a MKS SMELZI V1.0
main board (based on MELZI, i.e. Sanguinololu). I comes as a complete kit,
including display and panel.
Two variants exists, L10 and L16, with a height of 100 and 160 mm.
The heating function of the provided bed can enabled by soldering a
thermistor and some wires to it.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:35 -05:00
Stefan Brüns
0fe57ad4f5 Add Support TinyBoy2 OLED/Encoder panel
The OLED is driven by an SSD1306, connected to the board via
I2C, the rotary encoder is connected to 3 GPIO pins.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
2017-03-31 04:05:34 -05:00
Scott Lahteine
edbc024d76 Disable UBL_G26_MESH_EDITING by default 2017-03-31 02:20:20 -05:00
Stefan Brüns
5699e2b881 Add SOFT_PWM_DITHER to other configurations 2017-03-24 05:02:24 -05:00
Scott Lahteine
783338a0b8 Add UBL_MESH_EDIT_ENABLED to configs 2017-03-24 00:44:55 -05:00
Scott Lahteine
e244399766 Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97 G38 optional double touch
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.

==============================================

Bugfix

The current G38 only stopped a move if it involved the Z axis.

Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.

Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.

==============================================

Change G38 back to using Z_MIN_PROBE

There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.

G38 started out as using the Z_MIN_PROBE pin.  I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
Scott Lahteine
2573f4dd05 Merge pull request #6052 from thinkyhead/rc_lift_on_pause
Add PARK_HEAD_ON_PAUSE feature / M125
2017-03-20 03:36:31 -05:00
Scott Lahteine
26473cab6d Add PARK_HEAD_ON_PAUSE feature 2017-03-19 05:06:55 -05:00
Scott Lahteine
8eb29f91e6 Patch filament change options and beep code 2017-03-19 01:14:39 -05:00
Scott Lahteine
f98fb6b38e Update Felix config for UBL 2017-03-19 00:28:48 -05:00
Scott Lahteine
143ab8f329 Remove Roxy's personal configurations 2017-03-18 12:35:02 -05:00
Scott Lahteine
2512871a36 Patch configs UBL followup 2017-03-18 12:32:03 -05:00
Scott Lahteine
27b5666e15 Move Allen Key probe definition to the top 2017-03-18 12:27:37 -05:00
Scott Lahteine
cf94688925 Univeral Bed Leveling - configuration 2017-03-18 11:35:19 -05:00
Scott Lahteine
03aa424ccb Merge pull request #6053 from thinkyhead/rc_clean
Remove extraneous whitespace
2017-03-18 03:26:45 -05:00
Scott Lahteine
af644871bf Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics
Remove delta optimization concepts… for now
2017-03-18 03:26:24 -05:00
Scott Lahteine
77491dd924 Remove extraneous whitespace 2017-03-18 03:17:39 -05:00
Scott Lahteine
b865b21d32 Can't use Z fade height with DELTA 2017-03-17 08:34:47 -05:00
Scott Lahteine
0e410c9dfd Software endstop options as simple switches 2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204 Replace MBL Z hacking 2017-03-17 06:05:17 -05:00
Scott Lahteine
5a456c832a Apply TMC2130 to example configurations 2017-03-07 04:22:06 -06:00
Scott Lahteine
6aa81255a9 Patch and clean up "flsun" kossel. Followup to #5911. 2017-03-06 03:15:00 -06:00
Marek Pikuła
7698c5617a Added circle nozzle cleaning parameters to example configurations 2017-03-06 03:04:58 -06:00
Scott Lahteine
3b75518ef6 Merge pull request #5911 from aphex3k/flsun_kossel_mini
Configuration.h and Configuration_adv.h for the kossel mini by flsun
2017-03-06 02:26:01 -06:00
Scott Lahteine
05abe853f9 New option: NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine
5065636023 Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio
LIN_ADVANCE: Fixed E/D ratio option
2017-03-03 03:24:41 -06:00
Scott Lahteine
fb4aead2b1 Clean up and finish #5887 2017-03-02 20:16:29 -06:00
Sebastianv650
de6c40ed8f Add option to fix E/D ratio
Work around for slicers producing buggy gcode.
2017-03-02 01:00:37 -06:00
Michael Henke
47729918fc
enable ENSURE_SMOOTH_MOVES 2017-02-27 20:42:49 -08:00
Michael Henke
330b981912 created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun 2017-02-25 21:31:37 -08:00
Colin Gilgenbach
48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
2017-02-25 21:52:43 -06:00
Scott Lahteine
e282b72151 Remove non-applicable comment on MANUAL_Z_HOME_POS 2017-02-18 05:14:43 -06:00
Scott Lahteine
561904345f Tweak config ordering for M600 2017-02-18 00:01:31 -06:00
Scott Lahteine
931914e679 Apply M600 updates to all configs 2017-02-15 05:29:34 -06:00
Scott Lahteine
47f9883b0f Dynamic allocation for SDCARD_SORT_ALPHA 2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a New feature: SDCARD_SORT_ALPHA 2017-02-14 21:37:24 -06:00
Robert Kirk
0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
esenapaj
d38e335272 From "microseconds" to "milliseconds"
delay() is milliseconds
2017-01-02 01:19:33 +09:00
Scott Lahteine
4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine
5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine
8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Sebastianv650
84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine
bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
2016-12-20 01:31:53 -08:00
Scott Lahteine
18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
esenapaj
6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine
78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh
Save Bed Leveling to EEPROM
2016-12-15 20:23:01 -08:00
Scott Lahteine
1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj
069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
Scott Lahteine
06af3b62ba Move HOLLOW_FRAME options to config_adv 2016-12-14 04:31:27 -08:00
AnHardt
d0e24e0876 Adaptive screen updates for all kinds of displays
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
2016-12-13 18:44:34 +01:00
Scott Lahteine
0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis
Rearrange Move Menu, Fix up Delta Calibration
2016-12-13 07:07:05 -08:00
Scott Lahteine
641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
João Brázio
3f75edb1d6 Updated bq Hephestos 2 example configuration 2016-12-13 09:26:07 +00:00
Scott Lahteine
da6a094424 Sanity-check inverting and pullups for Z probe and Z endstop
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
2016-12-08 00:12:19 -08:00
Scott Lahteine
aa241c63b3 Include M205 note in configurations 2016-12-07 14:45:44 -06:00
akaJes
d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine
f882355994 Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
Account for LCD improvements in ENSURE_SMOOTH_MOVES
2016-12-05 11:23:58 -06:00
Scott Lahteine
20e834461d Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
Show decimal for small numbers in ftostr4sign
2016-12-05 11:22:45 -06:00
Scott Lahteine
d5bf1684fe Implement as optional feature LCD_DECIMAL_SMALL_XY
And reduce the function size to simplify
2016-12-05 09:26:05 -06:00
Scott Lahteine
3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine
f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine
47b4b21308 Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
2016-12-01 13:37:02 -06:00
Scott Lahteine
415294801f Merge pull request #5330 from thinkyhead/rc_rgb_led
Support for an RGB LED using 3 pins
2016-11-30 14:14:00 -06:00
esenapaj
0909cf3d46 Adjust spacing 2016-11-30 19:39:39 +09:00
esenapaj
8e9e9c17b0 Follow-up the PR #5323 (Adding ukrainian language support)
・Update forgotten Configuration_adv.h of Felix\DUAL and K8400\Dual-head
2016-11-30 19:39:39 +09:00
esenapaj
d92ce8849b Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
・Make descriptions the same as others
2016-11-30 19:39:38 +09:00
Scott Lahteine
65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
jes
f674246397 extend Configurations files 2016-11-29 15:04:36 +02:00
Sebastianv650
f62f4006af Account for LCD improvements in ENSURE_SMOOTH_MOVES
.. and give the hint to try lower values if possible.
2016-11-28 17:44:19 +01:00
Scott Lahteine
092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted
Support for COREYX, COREZX, COREZY
2016-11-28 02:26:41 -06:00
Scott Lahteine
c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
Add a fade factor for mesh leveling
2016-11-28 02:07:51 -06:00
Scott Lahteine
5460a529da Add option DOGM_SPI_DELAY_US 2016-11-26 06:53:52 -06:00
Scott Lahteine
f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
esenapaj
ef97645002 Follow-up the PR #5255 (Case light menu (3rd attempt)) 2016-11-24 19:42:05 +09:00
Scott Lahteine
14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130
TMC2130 "Silent StepStick" support
2016-11-21 14:10:52 -06:00
Scott Lahteine
4e4f37b6c2 Code formatting for TMC and L6470 config options 2016-11-21 00:52:18 -06:00
Scott Lahteine
bf5f5f44cc Make TMC2130 init code auto-configure
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
2016-11-21 00:52:17 -06:00
Moritz
d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine
11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Scott Lahteine
072541f286 Update ENSURE_SMOOTH_MOVES in all configs 2016-11-19 01:28:47 -06:00
Scott Lahteine
0be6167f14 Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
K8200: Example configuration back in sync
2016-11-18 22:49:18 -06:00
Scott Lahteine
eb714ee873 Move dummy thermistor opts, fix redundant sensor comment 2016-11-18 22:24:48 -06:00
Scott Lahteine
7a99c6ce4f Reformat temp sensor listing 2016-11-18 22:24:47 -06:00
Scott Lahteine
eb120e518c Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts
Introduce endstop interrupts
2016-11-18 20:50:24 -06:00
CONSULitAS
cbae44df64 K8200: Example configuration back in sync
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
2016-11-18 22:55:02 +01:00
Scott Lahteine
2330619da0 Merge pull request #5191 from petrzjunior/const
Replace const bool with #define for consistency
2016-11-17 03:37:32 -06:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00