Firmware/Marlin/example_configurations
Bob-the-Kuhn 0934563b97 G38 optional double touch
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.

==============================================

Bugfix

The current G38 only stopped a move if it involved the Z axis.

Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.

Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.

==============================================

Change G38 back to using Z_MIN_PROBE

There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.

G38 started out as using the Z_MIN_PROBE pin.  I don't remember why we
changed it to the Z_MIN endstop.
2017-03-22 15:08:49 -05:00
..
adafruit/ST7565 Patch configs UBL followup 2017-03-18 12:32:03 -05:00
Cartesio G38 optional double touch 2017-03-22 15:08:49 -05:00
delta G38 optional double touch 2017-03-22 15:08:49 -05:00
Felix G38 optional double touch 2017-03-22 15:08:49 -05:00
Hephestos G38 optional double touch 2017-03-22 15:08:49 -05:00
Hephestos_2 G38 optional double touch 2017-03-22 15:08:49 -05:00
K8200 G38 optional double touch 2017-03-22 15:08:49 -05:00
K8400 G38 optional double touch 2017-03-22 15:08:49 -05:00
makibox G38 optional double touch 2017-03-22 15:08:49 -05:00
RepRapWorld/Megatronics Patch configs UBL followup 2017-03-18 12:32:03 -05:00
RigidBot G38 optional double touch 2017-03-22 15:08:49 -05:00
SCARA G38 optional double touch 2017-03-22 15:08:49 -05:00
TAZ4 G38 optional double touch 2017-03-22 15:08:49 -05:00
tvrrug/Round2 G38 optional double touch 2017-03-22 15:08:49 -05:00
WITBOX G38 optional double touch 2017-03-22 15:08:49 -05:00