MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7,940 Commits 1 Branch 0 Tags 96 MiB
515f05093f
Commit Graph

2015 Commits

Author SHA1 Message Date
benlye
0a2b4f3486 Fix bilinear levelling z offset 
Since run_probe was altered to return the probe Z position rather than the nozzle Z position bilinear levelling has been broken because the Z-offset has been applied twice - once in the run_probe function, and then again in the G29 code for bilinear levelling.
 2017-04-05 22:01:40 -05:00
Scott Lahteine
44a849bdce Fix broken M206/M428/G92 offsets 2017-04-05 22:01:37 -05:00
Roxy-3D
0423e93c42 Fix M421 AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL 
M421 was not connected up for AUTO_BED_LEVELING_BILINEAR.
M421 needed to migrate mesh data to new UBL EEPROM layout.
 2017-04-02 16:46:37 -05:00
Scott Lahteine
c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Scott Lahteine
deaad78df9 Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap 
G38 bug fix, made double touch optional & reverted to Z_MIN_PROBE
 2017-04-02 10:32:04 -05:00
Scott Lahteine
4c72167af3 Prevent a warning on echo_command 2017-04-02 08:36:58 -05:00
Scott Lahteine
9b5fd9522e Fix formatting, order for a UBL change 2017-04-02 07:15:40 -05:00
Scott Lahteine
2cbc7b4b73 Relocate serial macros and functions 2017-04-02 01:05:25 -05:00
Scott Lahteine
7a7a80e6c5 status_printf => lcd_status_printf_P 2017-04-02 01:05:25 -05:00
Scott Lahteine
790a3e9a8c Remove extraneous check of UBL_G26_MESH_EDITING 2017-04-01 23:03:40 -05:00
Scott Lahteine
7310110ec0 Fix logic of UBL::fade_scaling_factor_for_z 2017-04-01 22:52:48 -05:00
Scott Lahteine
1a775cecac Revert behavior of enqueue_and_echo_commands_P 2017-04-01 21:53:46 -05:00
Bob-the-Kuhn
185337e787 add delays to allow stop & kill messages to get out 2017-04-01 00:23:14 -05:00
Scott Lahteine
73e193da1d Implement LCD_BED_LEVELING for PROBE_MANUALLY 2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a Implement the "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine
342ee458ae Additional UBL fixes, optimizations 2017-03-31 11:12:57 -05:00
Scott Lahteine
a5e085cbea Have run_probe() return probe Z, not nozzle Z 2017-03-31 09:27:49 -05:00
Scott Lahteine
4487d22d56 Apply FIXFLOAT macro 2017-03-31 09:27:48 -05:00
Scott Lahteine
6cac0f43eb MBL fiddle 2017-03-31 09:27:48 -05:00
Scott Lahteine
25a6bfa7ed Add and apply WITHIN macro 2017-03-31 09:27:48 -05:00
Scott Lahteine
93aad54dc1 Clean up code, remove _now command function 2017-03-31 04:17:31 -05:00
Scott Lahteine
4902fd4e95 More data in UBL class, make it a static class 
- Make all `unified_bed_leveling` data/methods static
- Move some UBL-related variables into the class
- Replace `map_[xy]_index_to_bed_location` with `mesh_index_to_[xy]pos`
 2017-03-31 02:20:20 -05:00
Scott Lahteine
edbc024d76 Disable UBL_G26_MESH_EDITING by default 2017-03-31 02:20:20 -05:00
Scott Lahteine
9e4bd6b3b5 Further repairs to UBL, comments, spacing 2017-03-31 02:20:20 -05:00
Bob-the-Kuhn
f3618c3337 Reduce UBL RAM usage by making G26/G29 optional 2017-03-31 02:20:19 -05:00
Scott Lahteine
c9eb1d6ab7 Make MBL a static class, use lookup for index-to-point conversion 2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3 Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc 
UBL cleanup, optimization
 2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
Scott Lahteine
9924199802 Merge pull request #5908 from thinkyhead/rc_fix_slowdown 
General minor cleanup
 2017-03-29 21:43:33 -05:00
Scott Lahteine
f105cad43c Marlin: Slight cleanup to Marlin_main.cpp 2017-03-29 06:40:29 -05:00
Scott Lahteine
e3459ec178 Merge pull request #5989 from MagoKimbra/rc_fix_delta_angles 
Fix delta_angles
 2017-03-29 03:35:18 -05:00
Scott Lahteine
0a23a1bb3b Dynamic feedrate on SCARA, converting target mm/s to deg/s 2017-03-28 17:21:07 -05:00
Scott Lahteine
a9fc30ae2e Use safe_delay to ensure watchdog reset 2017-03-26 23:49:56 -05:00
Scott Lahteine
34d1c41b5f Merge pull request #6111 from benlye/benlye-patch-echo_command 
Fix type conversion issue with echo_command
 2017-03-24 17:57:28 -05:00
benlye
6a601aca35 Fix type conversion issue with echo_command 
With the the current definition of echo_command I cannot compile RCBugFix (Arduino IDE 1.8.1) with the error "invalid conversion from 'const char*' to 'char*'".  This change resolves that.
 2017-03-24 17:23:02 +00:00
Scott Lahteine
009a6ddd39 Adjust bilinear grid in M851 2017-03-24 06:28:59 -05:00
Scott Lahteine
eab7854a73 Merge pull request #6074 from thinkyhead/rc_immediate_shove 
Immediate commands take precedence
 2017-03-24 05:52:27 -05:00
Scott Lahteine
b5711a99a2 Patches to bring UBL closer to compliance 2017-03-24 01:37:52 -05:00
Scott Lahteine
d076c1b604 Apply some general cleanup to code 2017-03-24 01:37:51 -05:00
Roxy-3D
b8e4a6970b Get UBL up and running again 
All the changes to get the code into compliance with Marlin coding
standards made UBL sick.   This pretty much gets UBL back up and
running.
 2017-03-23 16:08:37 -05:00
Scott Lahteine
8f9face956 Merge pull request #6088 from rafaljot/patch-3 
Update Marlin_main.cpp
 2017-03-23 01:51:51 -05:00
Scott Lahteine
af2ea23e9c EXTRUDER_RUNOUT_PREVENT uses buffer_line_kinematic 2017-03-22 20:51:12 -05:00
Scott Lahteine
cd882b88db #if defined => #ifdef / PIN_EXISTS 2017-03-22 20:51:11 -05:00
Scott Lahteine
e244399766 Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
Bob-the-Kuhn
0934563b97 G38 optional double touch 
Made the double touch portion a conditional compile based on the
PROBE_DOUBLE_TOUCH flag.

==============================================

Bugfix

The current G38 only stopped a move if it involved the Z axis.

Moved all the G38 code to it's own section and put it where it would
always be executed no matter what axis was moving or if the endstop was
enabled.

Also added a comment to configuration_adv to alert the user the double
tap had to be turned on.

==============================================

Change G38 back to using Z_MIN_PROBE

There's no Z_MIN endstop if Z_DUAL_ENDSTOPS is enabled and you have them
set to the top of the gantry.

G38 started out as using the Z_MIN_PROBE pin.  I don't remember why we
changed it to the Z_MIN endstop.
 2017-03-22 15:08:49 -05:00
Scott Lahteine
cc3204509c UBL patch from Bob-the-Kuhn 2017-03-22 07:54:20 -05:00
Scott Lahteine
b904b5ae8d Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
rafaljot
6da949bbf0 Update Marlin_main.cpp 
Sometimes after killing heaters are still on.
 2017-03-21 15:06:01 +01:00
Scott Lahteine
48c6284c91 Immediate commands take precedence 2017-03-19 21:50:48 -05:00
Scott Lahteine
ff0dd162b7 PARK_HEAD_ON_PAUSE implementation 2017-03-19 07:27:35 -05:00
Scott Lahteine
4cf51157b3 Use XYZE rather than NUM_AXIS 2017-03-19 01:14:39 -05:00
Scott Lahteine
4c7f14752a Add disable_e_steppers function 2017-03-19 01:14:39 -05:00
Scott Lahteine
8eb29f91e6 Patch filament change options and beep code 2017-03-19 01:14:39 -05:00
Scott Lahteine
9b2b53f63a Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z 
Move Z last in tool-change for SWITCHING_EXTRUDER
 2017-03-19 00:34:41 -05:00
Scott Lahteine
4bca27ab89 Fix Kelvin conversion 
Thanks to @ospalh -- #6056
 2017-03-18 13:23:08 -05:00
Scott Lahteine
2c630a1b5c Merge pull request #6054 from thinkyhead/rc_ubl_renewal 
UBL for RCBugFix — cleanup, rebase, patch
 2017-03-18 12:07:57 -05:00
Scott Lahteine
0492a3a8f1 Merge pull request #6027 from Bob-the-Kuhn/add_kill_info 
Message for every KILL and STOP
 2017-03-18 11:49:35 -05:00
Scott Lahteine
b0a9c82c31 Fix single-char echo and pinMode usage 2017-03-18 11:35:20 -05:00
Scott Lahteine
fb60aa3736 UBL implementation 2017-03-18 11:35:20 -05:00
Scott Lahteine
af644871bf Merge pull request #6045 from thinkyhead/rc_remove_raw_kinematics 
Remove delta optimization concepts… for now
 2017-03-18 03:26:24 -05:00
Scott Lahteine
1e57b0c269 Remove delta interpolation concept 2017-03-17 06:32:11 -05:00
Scott Lahteine
e46898f8e5 Remove kinematic optimizations 2017-03-17 06:30:22 -05:00
Scott Lahteine
0e410c9dfd Software endstop options as simple switches 2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085 Implement soft_endstops_enabled for clamping 2017-03-17 06:05:17 -05:00
Scott Lahteine
e4649c9044 Add HAS_SOFTWARE_ENDSTOPS macro 2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204 Replace MBL Z hacking 2017-03-17 06:05:17 -05:00
Scott Lahteine
4e53124681 Merge pull request #6039 from Bob-the-Kuhn/M114-sync-with-stepper 
M114 - wait for move completion before reporting position
 2017-03-17 05:22:46 -05:00
Scott Lahteine
672e45652e Improved solution to tool-change bug 2017-03-16 23:59:10 -05:00
Scott Lahteine
23f1cfb46f Fix stuck CHDK pin as suggested in #6041 2017-03-16 21:49:39 -05:00
Bob-the-Kuhn
34ff0c3439 M114 - wait for move completion before reporting position 2017-03-16 15:10:45 -05:00
Bob-the-Kuhn
b31604a492 Message for every KILL and STOP 
No more mystery halts & resets

Moved messages to language.h

Added current command to inactive timeout message
 2017-03-15 21:05:11 -05:00
Bob-the-Kuhn
685ed5393a Bug Fix: Switching extruder tool change leaves Z in wrong position 
The tool_change function saves the current_position to the destination
array soon after starting.  Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down.  A later
section of tool_change moves the head back to the “original location”
using the destination array.  This later section assumes that the
destination array hasn’t been modified.

The fix is to save the destination Z position and then restore it after
the Z movements have completed.

Going back to using the current_position array for the switching
extruder Z axis moves (and  leaving the destination array untouched)
doesn’t fix the problem.

This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4 which was merged on 10
Oct 2016 as part of PR 4982.

This bug was discovered in Issue 5966.
 2017-03-14 02:36:24 -05:00
Scott Lahteine
51353f8fea Merge pull request #6000 from trivalik/NoWorkspaceWarning 
prevent warning with define of NO_WORKSPACE_OFFSETS
 2017-03-12 00:00:51 -06:00
Trivalik
71ac6f9d42 prevent warning with define of NO_WORKSPACE_OFFSETS 2017-03-09 23:49:57 +01:00
MagoKimbra
37a26dfc09 Fix delta_angles 2017-03-08 09:23:30 +01:00
Scott Lahteine
2defb1d748 Use SET_INPUT_PULLUP where appropriate 2017-03-07 23:43:33 -06:00
Scott Lahteine
58b3e98878 Use arrays for delta tower parameters 2017-03-07 19:00:22 -06:00
Scott Lahteine
47242a40bb Apply updated changes for delta_tower_angle_trim 2017-03-07 18:15:11 -06:00
Jimmy Envall
00b6b3da79 Added support for delta tower angle corrections. 2017-03-07 16:35:58 -06:00
Scott Lahteine
45f949d833 TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
Scott Lahteine
33f8a8a344 Merge pull request #5973 from thinkyhead/rc_circle_pattern 
Add circle pattern to nozzle clean
 2017-03-06 04:47:01 -06:00
Scott Lahteine
94b3e0a483 Merge pull request #5959 from benlye/benlye-fixm48 
Remove extra carriage return in M48 V1 output
 2017-03-06 04:24:28 -06:00
Marek Pikuła
6836b94eea Added circle pattern for nozzle cleaning feature 2017-03-06 03:03:00 -06:00
Scott Lahteine
be98016674 Merge pull request #5963 from thinkyhead/rc_no_offsets_optim 
New option: NO_WORKSPACE_OFFSETS
 2017-03-05 21:46:49 -06:00
Scott Lahteine
87b03b16bd Use a macro for array copies 2017-03-05 04:43:46 -06:00
Scott Lahteine
e141f3a03f Optimize coordinate transformation 
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
 2017-03-05 04:43:16 -06:00
Scott Lahteine
5f7e85398b Implement NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
benlye
dead89062a Update Marlin_main.cpp 
Remove unnecessary line break from M48 V1 output.
 2017-03-04 17:58:10 +00:00
Scott Lahteine
1ef6ccd919 Merge pull request #5951 from thinkyhead/rc_print_2d_array 
Reduce code size (40b, or 166b with bilinear subdivision)
 2017-03-03 21:27:44 -06:00
Scott Lahteine
98c7b682ca General cleanup, const usage, var naming 2017-03-03 20:57:49 -06:00
jes
369bfc8a1e Reduce code size (40b, or 166b with bilinear subdivision) 2017-03-03 20:36:32 -06:00
Scott Lahteine
0d13412105 Fix "Heating..." message 2017-03-03 12:12:51 -06:00
Scott Lahteine
b3e2bd6f29 Reduce E_D_ratio code 2017-03-02 01:00:37 -06:00
Sebastianv650
de6c40ed8f Add option to fix E/D ratio 
Work around for slicers producing buggy gcode.
 2017-03-02 01:00:37 -06:00
Colin Gilgenbach
48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag 
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
 2017-02-25 21:52:43 -06:00
Scott Lahteine
34cba42104 Use PSTR for MSG_HEATING 2017-02-22 11:30:19 -06:00
dot-bob
cd68380ce6 Add status_printf to print messages to the lcd status line. 
Also add a hotend indicator to the heating message displayed on the lcd status line.
 2017-02-20 15:26:54 -06:00
Scott Lahteine
4da8b1494b Merge pull request #5854 from thinkyhead/rc_fixup_m600 
M600 cleanup and bugfix
 2017-02-18 04:27:13 -06:00
Scott Lahteine
44b4e116bd Commentary / style in gcode_M600 2017-02-18 04:08:00 -06:00
Scott Lahteine
284d6de9da Remove some old code comments 2017-02-17 15:25:56 -06:00
Scott Lahteine
4578c573fe Pause the print job timer while in M600 2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794 Simplify filament_change_beep function 2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87 Spacing, coding standards 2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9 Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
Scott Lahteine
a561bd5e3a New feature: SDCARD_SORT_ALPHA 2017-02-14 21:37:24 -06:00
Scott Lahteine
467f01435f Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce 
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
 2017-02-14 08:41:44 -06:00
jes
eaa829b58c Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly 2017-02-12 04:09:48 -06:00
Scott Lahteine
701f4a6d9d Merge pull request #5729 from Bob-the-Kuhn/guaranteed-BLTouch-detection 
guaranteed BLTouch detection
 2017-02-12 01:13:35 -06:00
Scott Lahteine
1bc5be3bdf Cast DELTA_PRINTABLE_RADIUS to float in sq() 
Addressing #5625
 2017-02-11 23:28:39 -06:00
Bob-the-Kuhn
0369f97ec1 guaranteed BLTouch detection 
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.

At 200 steps per mm, my system has problems  below a feedrate of 120 mm
per minute.

Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR.  If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero.  This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.

2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS.  The "extra" ISR runs only check the
endstops.  This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.

=========================================

BLTouch error state recovery

If BLTouch already active when deploying the probe then try to reset it
& clear the probe.

If that doesn't fix it then declare an error.

Also added BLTouch init routine to startup section
 2017-02-11 12:01:34 -06:00
Florian Heilmann
7bbc31704c Adjust probe_pt() terminal output to respect probe z-offset 2017-02-09 22:54:22 -06:00
Scott Lahteine
9b5515926a Merge pull request #5696 from thinkyhead/rc_volumetric_default 
Allow enabling volumetric filament on config load
 2017-01-14 05:48:51 -08:00
Robert Kirk
0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
AnHardt
fa26767efe Replace all remaining 'boolean' with 'bool' 2017-01-13 13:03:52 +01:00
AnHardt
f6858d9974 Fix M110 without leading N 
Store N in the right variable.
This is too rarely used.

"mea culpa, mea culpa, mea maxima culpa"
 2017-01-13 12:33:50 +01:00
Scott Lahteine
c376f6a2cb code_value_float tweak 2017-01-12 04:38:09 -08:00
Robert Kirk
306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
Damien
4e2639942b Support for M335 case light "no case light" 2016-12-19 23:23:08 -08:00
Robert Kirk
f724ef5820 Have bed leveling status output current status, not requested. 2016-12-19 18:47:45 -08:00
Scott Lahteine
f9f75c8016 Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to 2016-12-15 23:15:38 -08:00
Scott Lahteine
78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh 
Save Bed Leveling to EEPROM
 2016-12-15 20:23:01 -08:00
Scott Lahteine
d4f5418802 Merge pull request #5517 from esenapaj/Fix-for-PR-#5255 
Fix for the PR #5255 (Case light menu (3rd attempt))
 2016-12-15 20:01:22 -08:00
Scott Lahteine
6d7b1cdf6c Add M421 for ABL Bilinear 2016-12-15 19:39:11 -08:00
Scott Lahteine
32e65dc429 Extend M420 to print state and, with V, the matrix / mesh 2016-12-15 19:39:11 -08:00
Scott Lahteine
d04258753b Don't throw away the bed level matrix on G28 2016-12-15 19:21:18 -08:00
Scott Lahteine
8f0f225d10 Save ABL Planar Matrix to EEPROM 2016-12-15 19:21:15 -08:00
Scott Lahteine
e42fd7813a Save ABL Bilinear Grid to EEPROM 2016-12-15 19:20:48 -08:00
Scott Lahteine
55722c09da Use "UNPROBED" for un-probed bed_level_grid points 2016-12-15 19:08:44 -08:00
Scott Lahteine
2643404ac8 Throw an error in M420 if can't enable 2016-12-15 19:08:43 -08:00
Scott Lahteine
b1539394fd Use planner.unapply_leveling to undo tilt in G29 2016-12-15 19:08:43 -08:00
Scott Lahteine
04636f78eb Re-enable MBL/ABL after M48 2016-12-15 19:08:43 -08:00
Scott Lahteine
9b41638672 Minor tweak to G29 grid points 2016-12-15 19:08:42 -08:00
Scott Lahteine
daa2cad21f Fix comment on G29 to include 'Z' 2016-12-15 19:08:42 -08:00
Scott Lahteine
8244fefcc2 Tweak call to reset_bed_level in G29 2016-12-15 19:08:42 -08:00
Scott Lahteine
0995a5d734 Fixup reset_bed_level 2016-12-15 19:08:42 -08:00
Scott Lahteine
1b2fb2bdc7 ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_* 2016-12-15 19:08:41 -08:00
esenapaj
88157ba529 Fix for the PR #5255 (Case light menu (3rd attempt)) 2016-12-16 00:57:32 +09:00
esenapaj
069c6b38dd Remove unnecessary tabs and spaces 2016-12-16 00:21:32 +09:00
Scott Lahteine
8d9fcd8e6f Merge pull request #5495 from AnHardt/autoadjusting_display-updates 
Adaptive screen updates for all kinds of displays
 2016-12-14 04:16:26 -08:00
AnHardt
d0e24e0876 Adaptive screen updates for all kinds of displays 
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
 2016-12-13 18:44:34 +01:00
Scott Lahteine
94ffb58da7 Prevent retract un-hop at wrong height 2016-12-13 08:24:12 -08:00
Scott Lahteine
4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 2016-12-10 21:28:24 -08:00
esenapaj
e9393c3634 Suppress warnings, etc 
・Suppress warnings
・Remove unused variable "did_update"
 2016-12-08 17:47:59 +09:00
Scott Lahteine
83c5026db1 Ignore homing button when SD printing 
As suggested in #5404 by @android444
 2016-12-06 14:22:34 -06:00
akaJes
d7b948610a Experimental bilinear subdivision option 2016-12-05 20:11:24 -06:00
Scott Lahteine
b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures 
Fix auto_report_temperatures()
 2016-12-05 19:38:23 -06:00
AnHardt
59a27ed27d Fix auto_report_temperatures() 
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
 2016-12-06 01:26:44 +01:00
Scott Lahteine
b6b100c471 Merge pull request #5371 from thinkyhead/rc_extruders_can_differ 
Allow distinct factors for multiple extruders
 2016-12-05 11:22:31 -06:00
Scott Lahteine
3391c785c6 Support for distinct E factors 2016-12-05 07:26:18 -06:00
Scott Lahteine
c47e07d129 Fix Dual X software endstops 2016-12-05 06:51:41 -06:00
Scott Lahteine
4217e9653e Adjust park code in tool_change 2016-12-05 06:51:41 -06:00
Scott Lahteine
b20405db31 Only DXC_AUTO_PARK_MODE should auto-move in tool_change 2016-12-05 06:48:43 -06:00
Scott Lahteine
ca24af7d5d Dual X with home_z_safely is not parked 2016-12-05 06:43:26 -06:00
Scott Lahteine
0e15b4f434 Dual X set_axis_is_at_home can use x_home_pos for both 2016-12-05 06:43:26 -06:00
Scott Lahteine
54109dfaec Reduce code size for Dual X un-park 2016-12-05 06:43:26 -06:00
Scott Lahteine
fe96f74db1 Use const arguments in Dual X helper functions 2016-12-05 06:43:26 -06:00
Scott Lahteine
41278c1e8b Apply LOGICAL_POSITION to home positions on Dual X 2016-12-05 06:43:26 -06:00
Scott Lahteine
053fb55af6 Fix modes ordering in prepare_move_to_destination_dualx 2016-12-05 06:43:26 -06:00
Scott Lahteine
56dd15c0ad Use SET_INPUT for PS_ON_PIN in kill 2016-12-05 06:43:26 -06:00
Scott Lahteine
c06161b773 Use apply_leveling, not MBL directly 2016-12-05 01:53:36 -06:00
Scott Lahteine
fccc97de6d Save PROGMEM with string changes 
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
 2016-12-03 19:21:46 -06:00
Scott Lahteine
27dd5acc22 Fix set_led_color for BLINKM 
Follow-up to #5330
 2016-12-03 01:51:11 -06:00
Scott Lahteine
f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine
65c50e062e Support for an RGB LED using 3 pins 2016-11-30 00:02:31 -06:00
Scott Lahteine
092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted 
Support for COREYX, COREZX, COREZY
 2016-11-28 02:26:41 -06:00
Scott Lahteine
c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade 
Add a fade factor for mesh leveling
 2016-11-28 02:07:51 -06:00
Scott Lahteine
61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
Scott Lahteine
f6f77d34a1 Add a fade factor for mesh leveling 2016-11-26 03:41:26 -06:00
Scott Lahteine
2e966f8e5b Patch Capabilities Report for "PROGRESS" 2016-11-23 19:31:46 -06:00
Scott Lahteine
d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix 
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
 2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu 
Case light menu (3rd attempt)
 2016-11-23 13:46:33 -06:00
Kai
0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
Scott Lahteine
3bc2273ac9 Comment M540 2016-11-21 18:08:00 -06:00
Scott Lahteine
14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130 
TMC2130 "Silent StepStick" support
 2016-11-21 14:10:52 -06:00
Scott Lahteine
bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone 
Add an option for delta to home to the top
 2016-11-21 13:56:44 -06:00
Scott Lahteine
9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup 
Minor stepper cleanup
 2016-11-21 13:55:25 -06:00
Scott Lahteine
3e0376b45e Reorder M114 and M119 gcode cases 2016-11-21 00:52:19 -06:00
Scott Lahteine
127e21ae00 Extend M122 for all steppers 2016-11-21 00:52:18 -06:00
Moritz
d67c1d825f Add TMC2130 support 2016-11-21 00:17:45 -06:00
Scott Lahteine
11effeee2c Add an option for delta to home to the top 2016-11-20 23:12:07 -06:00
Moshen Chan
29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
Scott Lahteine
87b6b19256 Patch CASE_LIGHT typo 2016-11-18 23:49:12 -06:00
Scott Lahteine
181cdb3cfe Move GCode list above include lines 2016-11-18 22:24:46 -06:00
Scott Lahteine
eb120e518c Followup to new endstop interrupts feature 
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
 2016-11-18 21:53:45 -06:00
Scott Lahteine
832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts 
Introduce endstop interrupts
 2016-11-18 20:50:24 -06:00
Scott Lahteine
98600e1433 Minor stepper cleanup 2016-11-18 01:15:57 -06:00
Florian Heilmann
d08867986e Add autotemp capabilities to M104 
This allows M104 to pass the F and B parameters to enable autotemp as well
 2016-11-17 11:28:19 -06:00
Scott Lahteine
2330619da0 Merge pull request #5191 from petrzjunior/const 
Replace const bool with #define for consistency
 2016-11-17 03:37:32 -06:00
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency 2016-11-16 18:55:21 +01:00
Scott Lahteine
5d23e52d75 Merge pull request #5228 from thinkyhead/rc_keep_last_mix 
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
 2016-11-15 19:12:01 -06:00
Scott Lahteine
99b0c1fe56 Fix DIRECT_MIXING_IN_G1 to preserve the previous mix 2016-11-15 16:12:26 -06:00
Scott Lahteine
410657b050 Fix G30 with limits, print correct probe XY 2016-11-15 14:10:28 -06:00
AnHardt
f3eee02596 Introduce endstop interrupts 
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.

The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.

This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
 2016-11-15 12:07:41 +01:00
Scott Lahteine
665b7f3893 Merge pull request #5212 from thinkyhead/rc_mixing_faster 
Store mix factors as reciprocals and multiply
 2016-11-12 18:47:11 -06:00
Scott Lahteine
60cc9342a4 Merge pull request #5188 from thinkyhead/rc_extended_host_support 
Extended host support: M155 Auto temp report, M115 capabilities
 2016-11-12 15:38:06 -06:00
Scott Lahteine
f663220e87 Store Mix factors as reciprocals and multiply 2016-11-12 15:19:18 -06:00
Scott Lahteine
b31a07e261 Stateful M355 with separate P parameter 2016-11-09 03:28:18 -06:00
Scott Lahteine
3c9a838651 Extended capabilities report in M115 2016-11-09 02:32:58 -06:00
Scott Lahteine
68b866b5dd Add M155 - Auto-report temperature with interval 2016-11-09 02:32:58 -06:00
Scott Lahteine
75bfde9945 M155=>M260, M156=>M261 2016-11-08 17:54:54 -06:00
Scott Lahteine
dcfd7c69e8 Merge pull request #5163 from nzinov/RCBugFix 
Improve G30 probing command - add optional arguments
 2016-11-07 11:37:13 -06:00
Scott Lahteine
e765eebfb0 Patch spacing in bilinear grid report 2016-11-07 04:08:25 -06:00
Scott Lahteine
1864b282c5 Implement reversed CORE options 2016-11-05 23:47:51 -05:00
Nikolay Zinov
dea00bbcf1 improve G30 probing 
Add optional parameters
X, Y for probe point
S sets stowing on and off
 2016-11-05 13:22:45 +03:00
Scott Lahteine
176aeafc19 Don't define bilinear_line_to_destination on kinematic setups 2016-11-03 14:10:07 -05:00
Scott Lahteine
236853df22 Corrections to bilinear_line_to_destination 
- Allow more than 9x9 probe points
- Account for the probe starting position
 2016-11-03 04:43:59 -05:00
Scott Lahteine
0115e495fe Fix up Dual X switch blocks 2016-11-02 21:38:50 -05:00
Scott Lahteine
2495ab7af2 Make dual_x_carriage_mode an enumeration 2016-11-02 21:38:49 -05:00
Scott Lahteine
d6c36f5bb9 Fix Z raise with DXC_AUTO_PARK_MODE 2016-11-02 21:36:50 -05:00
Scott Lahteine
0c79553fc5 Cast int to AxisEnum for some accessors 2016-11-02 17:42:24 -05:00
Scott Lahteine
adbf1f7dca Add M355 to the GCodes list. 2016-11-02 16:43:52 -05:00
Scott Lahteine
63efc10599 Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines 
Split cartesian moves on grid boundaries with bilinear ABL
 2016-11-02 16:14:55 -05:00
Scott Lahteine
ee5b8d6dc8 Split moves on grid boundaries with bilinear ABL on cartesian 2016-11-01 08:25:47 -05:00
Scott Lahteine
66744a6076 Merge pull request #5133 from thinkyhead/rc_M355_case_light 
M355 Case light
 2016-11-01 07:51:27 -05:00
Scott Lahteine
955d14acb0 Patch photo pin code style 2016-11-01 06:30:14 -05:00
Stanley
ab3f966f5f Case light G-code M355 
implemented G-Code M355 into Marlin
 2016-11-01 06:30:14 -05:00
Sebastianv650
f9bea7968f BugFix for incorrect E-speed calculation 
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
 2016-11-01 08:08:47 +01:00
Scott Lahteine
ff3a8ca0d1 Use NUM_DIGITAL_PINS instead of custom DIO_COUNT 2016-10-31 08:08:03 -05:00
Scott Lahteine
04a1fac029 Some cleanup to M43 2016-10-31 08:08:03 -05:00
Bob-the-Kuhn
c7f1f0dae6 Add endstop monitor & make pins report pretty 2016-10-31 08:08:02 -05:00
Scott Lahteine
396434a445 Fix compiler warning in M145 2016-10-28 20:57:36 -05:00
Scott Lahteine
07bfc45df8 Adjust spacing in gcode_M149 2016-10-28 20:57:36 -05:00
Scott Lahteine
1a2310c494 Make LCD preheat vars an array to reduce code size 2016-10-28 20:57:36 -05:00
Scott Lahteine
50ee749082 Centralize click-handling in the LCD loop 2016-10-28 20:57:21 -05:00
Scott Lahteine
47ad97c35e Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset 
Save hotend_offset array (M218) in EEPROM
 2016-10-28 20:08:29 -05:00
Scott Lahteine
67ab54185b Save hotend_offset array (M218) in EEPROM 2016-10-28 18:45:23 -05:00
MagoKimbra
dfcdbb437b Fix Command M420 2016-10-28 20:53:48 +02:00
Scott Lahteine
c34dbfb248 Merge pull request #5072 from thinkyhead/rc_preset_auto_fans 
Add predefined AUTO_FAN_PINs to pins files
 2016-10-27 17:12:11 -05:00
Scott Lahteine
c4c53856a4 Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088 
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
 2016-10-26 21:51:18 -05:00
esenapaj
d5a5042d23 Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL) 2016-10-27 10:32:20 +09:00
Scott Lahteine
3f94b15cef Fix bilinear grid constraints 
Followup to #5090
 2016-10-26 18:11:26 -05:00
Scott Lahteine
ada935de87 Allow TEMP_STAT_LEDS with only one LED defined 2016-10-26 17:51:26 -05:00
Scott Lahteine
f0d673561f Fix for bilinear grid outside bounds 2016-10-26 05:00:03 -05:00
Scott Lahteine
1ba1ec0db9 Handle M108 in M1 also with ULTIPANEL 2016-10-25 23:25:47 -05:00
Greg Cormier
f0aed9dac7 Fix #4995 - M48/G29 on CoreXY maybe others? 2016-10-22 20:45:13 -04:00
Scott Lahteine
3544c3632f Merge pull request #5062 from thinkyhead/rc_warnings_fix 
Warnings fixed redux
 2016-10-22 12:21:36 -05:00
Josef Pavlik
0bd66807b2 fixed warning: extra ; 2016-10-22 11:12:29 -05:00
Scott Lahteine
5f5a55a0de Add a ZERO macro to clear arrays 2016-10-22 10:07:18 -05:00
Scott Lahteine
2783dcb4cc Save some RAM in MBL's G29 2016-10-22 02:52:56 -05:00
esenapaj
385bd8a4a3 Fix freezing and MINTEMP Error with MAX31855 thermocouple 2016-10-16 07:33:14 +09:00
Scott Lahteine
ca7275a67a Disable EXTRAPOLATE_FROM_EDGE by default 2016-10-14 14:44:28 -05:00
Scott Lahteine
e7cf566fc5 Do kinematic segments with buffer_line_kinematic 
This breaks the raw option, but in the future perhaps all planner moves
will be sent in raw form instead of logical.
 2016-10-10 17:14:03 -05:00
Scott Lahteine
a10e81dc2a Minor cleanup of set_bed_leveling_enabled 2016-10-10 17:14:03 -05:00
Scott Lahteine
029824bc49 Patch ADJUST_DELTA macro for SCARA 2016-10-10 17:14:03 -05:00
Scott Lahteine
d963020532 Sort out some header dependencies 2016-10-10 17:14:03 -05:00
Scott Lahteine
a07033a6c1 Merge pull request #4974 from esenapaj/Follow-up-the-PR-#4955 
Fix and follow-up the PR #4955 (PINS_DEBUGGING and M43: Read pin states), etc
 2016-10-10 13:27:52 -05:00
Scott Lahteine
f8199b2cc1 Merge pull request #4982 from thinkyhead/rc_abl_bugfix 
Fix planner with kinematics, delta ABL
 2016-10-10 13:24:22 -05:00
esenapaj
00456b0cb3 Fix compilation errors 2016-10-10 14:22:43 +09:00
Scott Lahteine
e4e290d957 Make EXTRUDER_RUNOUT_PREVENT kinematic compatible 2016-10-09 15:58:33 -05:00
Scott Lahteine
847429eff4 Make tool_change kinematic compatible 2016-10-09 15:58:32 -05:00