MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,716 Commits 1 Branch 0 Tags 96 MiB
6ebf8ea230
Commit Graph

8716 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Scott Lahteine
2efd5b119d Add USER_SCRIPT_RETURN option 2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5 Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled 
Based on #7769
 2017-09-27 10:39:44 -05:00
Scott Lahteine
0c2cefed8f Merge pull request #7766 from thinkyhead/bf1_melzi_fixes 
Melzi fixes
 2017-09-27 03:21:05 -05:00
DecoyPlatypus
41dcbe89dd Fixed ST7920_DELAY typo 
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
 2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6 Fixed LCD_FOR_MELZI SanityCheck 
Sanity Check for LCD_FOR_MELZI  would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
 2017-09-27 03:01:09 -05:00
Scott Lahteine
aefd2a5c4b Merge pull request #7762 from thinkyhead/bf1_g3d_and_babystep 
[1.1.x] Fix G3D_PANEL encoder steps, babystep label
 2017-09-27 01:08:20 -05:00
Scott Lahteine
e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
 2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076 No need for LCD_PINS_Dn when unused 2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68 babystepping tweak 2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30 Fix babystep menu display 2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1 Fix encoder pulses for G3D_PANEL 2017-09-27 00:12:20 -05:00
Scott Lahteine
9ee92f1246 Fix ADVANCED_PAUSE_FEATURE in .travis.yml 2017-09-26 17:12:05 -05:00
Scott Lahteine
ac2ac99e15 Fix bad logic in autostart 
As pointed out by @marcio-ao in #7638
 2017-09-24 17:52:35 -05:00
Scott Lahteine
72e9534d11 Merge pull request #7725 from thinkyhead/bf1_creality_fun 
More featureful CR-10 configurations
 2017-09-24 17:08:32 -05:00
Scott Lahteine
c1cc79176c Full-featured Creality configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1 Disable BABYSTEP_XY by default in all configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa Add size note to SDSORT_LIMIT 2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217 General code cleanup, spacing 2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97 matrix names update (#7697) 
* matrix names update

* symplified names

* new angle normalization

* ABC

* axis

* least squares

* recalc_delta_settings

* endstop_adj

* 0p

* bug
 2017-09-24 01:45:31 -05:00
Scott Lahteine
ca13f4c3dd Merge pull request #7720 from thinkyhead/bf1_caselight_fix 
Fix caselight compile issues
 2017-09-23 22:15:58 -05:00
Scott Lahteine
9d4d53e2fd Update links to old wiki page 2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713 Fix LEVEL_BED_CORNERS (No leveling required) 2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f Define drawmenu items once, in ultralcd.cpp 2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010 Fix caselight compile issues 2017-09-23 22:00:44 -05:00
GMagician
5b87843fae Addressing #7612 
Replaced extruder with hotend
 2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2 Merge pull request #7593 from marcio-ao/bugfix-1.1.x 
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)
 2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1 UBL LCD Bugfixes (#7598) 2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df Added option for graphical overlay for Z-offset 2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches 
M111: no args reports current flags
 2017-08-31 15:19:29 -05:00
Scott Lahteine
41e4de62b3 Merge pull request #7592 from thinkyhead/bf1_workspace_planes 
CNC workspace planes for G5
 2017-08-31 15:18:15 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5 
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
 2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564) 
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
 2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language 
Slovak UTF-8 translation
 2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
Scott Lahteine
9721c77fb9 Merge pull request #7577 from thinkyhead/bf1_creality_fix 
Fixes required for Creality CR-10
 2017-08-27 20:51:15 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563) 
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
 2017-08-25 17:03:07 -05:00
Scott Lahteine
ca9734805c Merge pull request #7560 from thinkyhead/bf1_m406_patch 
Addressing #7552
 2017-08-25 03:38:41 -05:00
GMagician
0067bb2840 Addressing #7552 
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
 2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589 Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben 
New feature: Part-Cooling Fan Multiplexer
 2017-08-25 03:16:40 -05:00
Scott Lahteine
ddfe527ff2 Merge pull request #7554 from thinkyhead/bf1_sanguino_config 
Sanguinololu example config
 2017-08-23 19:58:05 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation 
Slovak UTF-8 translation
 2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98 Organize, document pins.h include lines 2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2 Minor patches to pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0 Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc Sanguinololu example configuration 2017-08-23 18:32:59 -05:00
Scott Lahteine
d29bf49b66 Add Sanguino 644p to ENV for PlatformIO 2017-08-23 18:32:58 -05:00
Scott Lahteine
e337df2e98 Miscellaneous tweaks to serial outputs, code cleanups 2017-08-23 18:32:58 -05:00