MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,412 Commits 1 Branch 0 Tags 96 MiB
7f8ff0a724
Commit Graph

6956 Commits

Author SHA1 Message Date
MasterPIC
7f8ff0a724 Show leveling status on character LCD 2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7 Add confirmation to Init EEPROM command 2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d Add USER_SCRIPT_RETURN option 2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5 Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled 
Based on #7769
 2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd Fixed ST7920_DELAY typo 
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
 2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6 Fixed LCD_FOR_MELZI SanityCheck 
Sanity Check for LCD_FOR_MELZI  would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
 2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
 2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076 No need for LCD_PINS_Dn when unused 2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68 babystepping tweak 2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30 Fix babystep menu display 2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1 Fix encoder pulses for G3D_PANEL 2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15 Fix bad logic in autostart 
As pointed out by @marcio-ao in #7638
 2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c Full-featured Creality configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1 Disable BABYSTEP_XY by default in all configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa Add size note to SDSORT_LIMIT 2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217 General code cleanup, spacing 2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97 matrix names update (#7697) 
* matrix names update

* symplified names

* new angle normalization

* ABC

* axis

* least squares

* recalc_delta_settings

* endstop_adj

* 0p

* bug
 2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd Update links to old wiki page 2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713 Fix LEVEL_BED_CORNERS (No leveling required) 2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f Define drawmenu items once, in ultralcd.cpp 2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010 Fix caselight compile issues 2017-09-23 22:00:44 -05:00
Scott Lahteine
386b74f8c2 Merge pull request #7593 from marcio-ao/bugfix-1.1.x 
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)
 2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1 UBL LCD Bugfixes (#7598) 2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df Added option for graphical overlay for Z-offset 2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches 
M111: no args reports current flags
 2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5 
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
 2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564) 
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
 2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language 
Slovak UTF-8 translation
 2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563) 
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
 2017-08-25 17:03:07 -05:00
GMagician
0067bb2840 Addressing #7552 
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
 2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589 Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben 
New feature: Part-Cooling Fan Multiplexer
 2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation 
Slovak UTF-8 translation
 2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98 Organize, document pins.h include lines 2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2 Minor patches to pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0 Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc Sanguinololu example configuration 2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98 Miscellaneous tweaks to serial outputs, code cleanups 2017-08-23 18:32:58 -05:00
Vben
c0409b85e7 New feature: Part-Cooling Fan Multiplexer 2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6 Merge pull request #7530 from GMagician/Code-reduction 
Code reduction with some configurations
 2017-08-18 13:57:59 -05:00
GMagician
6127154af3 Fix identation by tab 
There was a tab instead of spaces
 2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f Code reduction this some configurations 
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
 2017-08-18 11:11:00 +02:00
GMagician
405a2132f3 #7529 compile fix 
I made an error in previous fix
 2017-08-17 22:04:28 +02:00
GMagician
869d7f3703 #7504 missing part 
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
 2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517 Merge pull request #7505 from thinkyhead/bf1_anet_1_pio 
Add Anet 1.0 to Platformio.ini
 2017-08-17 00:33:20 -05:00
Vben
4817b39d98 Added new feature for AutoParking Extruder (APE) 2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6 Use [XY]_CENTER for error correction 
Followup to #7512
 2017-08-16 16:13:09 -05:00